Geology ReportsSearch

USGS · 70015363

Heat capacities and entropies at 298.15 K of MgTiO3 (geikielite), ZnO (zincite), and ZnCO3 (smithsonite)

Abstract

Heat capacities of synthetic MgTiO3 (geikielite), ZnO (zincite), and natural crystals of smithsonite (ZnCO3) were measured between 9 and 366 K using an automatic adiabatically shielded calorimeter. At 298.15 K the standard molar entropies Smo of MgTiO3, ZnO, and ZnCO3 are (74.64 ?? 0.15), (43.16 ?? 0.09), and (81.19 ?? 0.16) J??K-1??mol-1, respectively. Debye temperatures for MgTiO3 and ZnO calculated from our Cp, mo values below 20 K are (900 ?? 20) K and (440 ?? 25) K respectively. Heat capacities for MgTiO3 and ZnO were combined with enthalpy increments from the literature to derive heat-capacity equations for these phases from 260 to about 1800 K. The heat capacities of MgTiO3 between 260 and 1720 K were fitted with an average deviation of 0.3 per cent by the equation: C??p,m/(J??K-1??mol-1) = 222.5-0.05274(T/K)-6.092x105(T/K)-1-1874.6(T/K) -1/2+1.878x10-5(T/K)2 and for ZnO the equation: C??p,m/(J??K-1??mol-1) = 53.999+7.851x10-4(T/K)-5.868x105(T/K)-2 -127.50(T/K)-:1/2+1.9376x10-6(T/K)2 fits the heat capacities in the temperature interval of 250 to 1800 K with an average deviation of 0.7 per cent. ?? 1989.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. A. Robie, H.T. Haselton, B. S. Hemingway. 1989. Heat capacities and entropies at 298.15 K of MgTiO3 (geikielite), ZnO (zincite), and ZnCO3 (smithsonite). https://doi.org/10.1016/0021-9614(89)90058-x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Molar heat capacity and entropy of calcium metal

The heat capacity of calcium has been measured at 85 mean temperatures between T ≈ 8 K and T ≈ 369 K using an adiabatically-shielded calorimeter in an intermittent heating mode. At T = 298.15 K, the recommended values for the molar heat capacity, molar entropy, and molar enthalpy increment referred to T = 0 are (25.77 ± 0.08) J·K −1 ·mol −1 , (42.90 ± 0.11) J·K −1 ·mol −1 , and (5811 ±12)J·mol −1 , respectively. The uncertainties are twice the standard deviation of the mean.

Journal of Chemical Thermodynamics

Thermodynamic properties of scapolites at temperatures ranging from 10 K to 1000 K

The heat capacities of five mineral samples from the scapolite solid-solution series, Na4Al3Si9O24Cl (marialite) to Ca4Al6Si6O24CO3 (meionite), were measured by the adiabatic method from T=8 K to T=350 K and by the differential scanning calorimetry (d.s.c.) method from T = 300 K to T = 1000 K. The meionite (Me) content in per cent {Me=100 Ca*/(Ca* + Na*)} (where the asterisk indicates that possible substituents are included) and molar heat capacity (Cp,m/R) at T=298.15 K for each sample is: Me28, 82.07; Me44, 82.09; Me55, 83.95; Me69, 85.80; Me88, 84.54. The standard molar entropies, {S,om(298.15 K)-Som(0 K)} R-1 (R=8.31451 J??K-1??mol-1), at T=298.15 K for the respective compositions are: 85.05??0.26, 83.78??0.50, 85.22??0.24, 85.76??0.21, and 84.17??0.59. The calculated standard molar entropies (as above) at T=298.15 K for the end-members marialite and meionite, and for an intermediate composition (mizzonite=Me75) are 84.85, 83.94 and 86.15, respectively. Values of the coefficients in the equation Cp,m/R = a + bT+ cT2 + dT-1/2 + eT-2 (valid from T = 300 K to T =1000 K) are: (Mex, a, b/K, c/K2, d/K-1/2, e/K-2 Me88), 315.580, -0.0795676, 1.52825.10-5, -3954.83, 1808460; Me69, 261.285, -0.0415017, 8.73053.10-7, -3028.28, 1083666; Me55, 232.236, -0.0352222, 6.49875.10-6, 2505.99, 601750; Me44, 276.696, -0.0756614, 2.39722.10-5, -3210.40, 1044363; Me28, 149.917, 0.0229399, -1.23180.10-5, 1208.87, -318470. Smoothed thermodynamic functions for the five samples are also presented. The enthalpies of solution for five natural scapolites were measured in 2PbO??B2O3 melts at T= 973 K by Calvet-type calorimetry. The values of ??solHom/R??K are: Me11, 32.14??0.7; Me28, 32.34??0.4; Me44, 33.66??0.8; Me69, 35.29??0.8; Me88, 32.87??0.3. The calculated enthalpies of formation for stoichiometric scapolites ??fHom/103??R??K at T= 298.15 K are: Me0, -1467.4??1.3; Me11, -1491.2??1.2; Me28, -1527.6??0.9; Me44, -1564.1??1.1; Me55, -1587.4??1.1; Me69, -1619.7??1.1; Me75, -1633.1??1.1; Me88, -1649.1??1.0; Me100, -1664??1.6. The heat capacity, the entropy, and the enthalpy of solution have maximal values near Me75 which may account in part for the relatively common occurrence of that composition in natural assemblages. Earlier measurements on leucite have been extended by the Komada/Westrum phonon dispersion model and corrected to end-member composition. ?? 1996 Academic Press Limited.

Journal of Chemical Thermodynamics

Low-temperature molar heat capacities and entropies of MnO2 (pyrolusite), Mn3O4 (hausmanite), and Mn2O3 (bixbyite)

Pyrolusite (MnO2), hausmanite (Mn3O4), and bixbyite (Mn2O3), are important ore minerals of manganese and accurate values for their thermodynamic properties are desirable to understand better the {p(O2), T} conditions of their formation. To provide accurate values for the entropies of these important manganese minerals, we have measured their heat capacities between approximately 5 and 380 K using a fully automatic adiabatically-shielded calorimeter. All three minerals are paramagnetic above 100 K and become antiferromagnetic or ferrimagnetic at lower temperatures. This transition is expressed by a sharp ??-type anomaly in Cpmo for each compound with Ne??el temperatures TN of (92.2??0.2), (43.1??0.2), and (79.45??0.05) K for MnO2, Mn3O4, and Mn2O3, respectively. In addition, at T ??? 308 K, Mn2O3 undergoes a crystallographic transition, from orthorhombic (at low temperatures) to cubic. A significant thermal effect is associated with this change. Hausmanite is ferrimagnetic below TN and in addition to the normal ??-shape of the heat-capacity maxima in MnO2 and Mn2O3, it has a second rounded maximum at 40.5 K. The origin of this subsidiary bump in the heat capacity is unknown but may be related to a similar "anomalous bump" in the curve of magnetization against temperature at about 39 K observed by Dwight and Menyuk.(1) At 298.15 K the standard molar entropies of MnO2, Mn3O4, and Mn2O3, are (52.75??0.07), (164.1??0.2), and (113.7??0.2) J??K-1??mol-1, respectively. Our value for Mn3O4 is greater than that adopted in the National Bureau of Standards tables(2) by 14 per cent. ?? 1985.

Journal of Chemical Thermodynamics