Geology Reports⌕ Search

USGS · 70014724

Higher resolution satellite remote sensing and the impact on image mapping

Abstract

Recent advances in spatial, spectral, and temporal resolution of civil land remote sensing satellite data are presenting new opportunities for image mapping applications. The U.S. Geological Survey's experimental satellite image mapping program is evolving toward larger scale image map products with increased information content as a result of improved image processing techniques and increased resolution. Thematic mapper data are being used to produce experimental image maps at 1:100,000 scale that meet established U.S. and European map accuracy standards. Availability of high quality, cloud-free, 30-meter ground resolution multispectral data from the Landsat thematic mapper sensor, along with 10-meter ground resolution panchromatic and 20-meter ground resolution multispectral data from the recently launched French SPOT satellite, present new cartographic and image processing challenges. The need to fully exploit these higher resolution data increases the complexity of processing the images into large-scale image maps. The removal of radiometric artifacts and noise prior to geometric correction can be accomplished by using a variety of image processing filters and transforms. Sensor modeling and image restoration techniques allow maximum retention of spatial and radiometric information. An optimum combination of spectral information and spatial resolution can be obtained by merging different sensor types. These processing techniques are discussed and examples are presented.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Allen H. Watkins, June M. Thormodsgard. 1987. Higher resolution satellite remote sensing and the impact on image mapping. https://doi.org/10.1016/0094-5765(87)90109-3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Profiling lunar dust dissolution in aqueous environments: The design concept

Published studies and internal NASA reports indicate that when native lunar dust is suspended in an aqueous solution a variety of metal and other ions are released. This release has implications for future lunar missions, ranging from effects on mission hardware, effects on life support systems, possible direct effects on human health, and effects on research experiments such as plant growth experiments, space biology experiments and any activities that may involve the use of water sourced from the lunar poles. Furthermore, such contaminants could become concentrated or chemically altered to a more hazardous form during a variety of lunar mission activities, including everything from space suit cleaning to lunar industrial materials extraction. The exact profile of the release of ions from lunar dust and the nature of the partially dissolved particles has not been explored. Any model of this dissolution must be based on an understanding of the unique micromorphology of lunar dust, including its glassy nature, agglutinate features, high surface area and the presence of small deposits of elemental iron (nanophase iron) located near the surface of the grain particles. Dust has a very high surface area available for interaction with water. For this reason, on first exposure to water, an immediate pulsed release of ions could occur, with more prolonged release taking place over months or years. The few studies that have been conducted previously have been limited in both the time scales examined and in the selection of ions that were measured. The proposed investigation is a comprehensive materials science investigation, using the most modern analytical tools to catalogue all metals given off from lunar dust in various aqueous solutions and their time profiles of release from the very short term to the very long term. The product of the proposed study will be a comprehensive database determined from NASA curated samples collected from the Apollo landing sites that can be applied to research in both living systems and non-living systems on the moon. The methods developed in the proposed study will also establish standards for analysis of lunar dust samples returned from future manned missions (Artemis and others) and future robotic missions. The knowledge gained from this basic materials science investigation will have broad impact on the design of engineered human safety and health systems.

Acta Astronautica↗

The role of photogeologic mapping in traverse planning: Lessons from DRATS 2010 activities

We produced a 1:24,000 scale photogeologic map of the Desert Research and Technology Studies (DRATS) 2010 simulated lunar mission traverse area and surrounding environments located within the northeastern part of the San Francisco Volcanic Field (SFVF), north-central Arizona. To mimic an exploratory mission, we approached the region “blindly” by rejecting prior knowledge or preconceived notions of the regional geologic setting and focused instead only on image and topographic base maps that were intended to be equivalent to pre-cursor mission “orbital returns”. We used photogeologic mapping techniques equivalent to those employed during the construction of modern planetary geologic maps. Based on image and topographic base maps, we identified 4 surficial units (talus, channel, dissected, and plains units), 5 volcanic units (older cone, younger cone, older flow, younger flow, and block field units), and 5 basement units (grey-toned mottled, red-toned platy, red-toned layered, light-toned slabby, and light-toned layered units). Comparison of our remote-based map units with published field-based map units indicates that the two techniques yield pervasively similar results of contrasting detail, with higher accuracies linked to remote-based units that have high topographic relief and tonal contrast relative to adjacent units. We list key scientific questions that remained after photogeologic mapping and prior to DRATS activities and identify 13 specific observations that the crew and science team would need to make in order to address those questions and refine the interpreted geologic context. We translated potential observations into 62 recommended sites for visitation and observation during the mission traverse. The production and use of a mission-specific photogeologic map for DRATS 2010 activities resulted in strategic and tactical recommendations regarding observational context and hypothesis tracking over the course of an exploratory mission.

Acta Astronautica↗

Supporting users through integrated retrieval, processing, and distribution systems at the Land Processes Distributed Active Archive Center

The US Geological Survey's EROS Data Center (EDC) hosts the Land Processes Distributed Active Archive Center (LP DAAC). The LP DAAC supports NASA's Earth Observing System (EOS), which is a series of polar-orbiting and low inclination satellites for long-term global observations of the land surface, biosphere, solid Earth, atmosphere, and oceans. The EOS Data and Information Systems (EOSDIS) was designed to acquire, archive, manage and distribute Earth observation data to the broadest possible user community. The LP DAAC is one of four DAACs that utilize the EOSDIS Core System (ECS) to manage and archive their data. Since the ECS was originally designed, significant changes have taken place in technology, user expectations, and user requirements. Therefore the LP DAAC has implemented additional systems to meet the evolving needs of scientific users, tailored to an integrated working environment. These systems provide a wide variety of services to improve data access and to enhance data usability through subsampling, reformatting, and reprojection. These systems also support the wide breadth of products that are handled by the LP DAAC. The LP DAAC is the primary archive for the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) data; it is the only facility in the United States that archives, processes, and distributes data from the Advanced Spaceborne Thermal Emission/Reflection Radiometer (ASTER) on NASA's Terra spacecraft; and it is responsible for the archive and distribution of “land products” generated from data acquired by the Moderate Resolution Imaging Spectroradiometer (MODIS) on NASA's Terra and Aqua satellites.

Acta Astronautica↗