Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70000651

Specific-lon electrode determinations of sulfide preconcentrated from San Francisco Bay waters

D.V. Vivit·J.W. Ball·E. A. Jenne
View original source ↗Export metadata ↓

Abstract

Measurements of low-level dissolved-sulfide concentrations in estuarine water from San Francisco Bay have been made using the sulfide-specific electrode after preservation, separation, and preconcentration of the sulfide species. The separation and preconcentration were acheived by coprecipitation of ZnS with Zn(OH)2 followed by collection and dissolution of the precipitate, giving concentration factors up to 160-fold Preconcentration provided sulfide solutions that were adequately measurable within the practical working range of the specific-ion electrode The sulfide detection limit with the preconcentration step is 0 02 ??g/l Spike recoveries in the range of 81 to 10 1% have been achieved for laboratory-prepared samples having S2- concentrations as low as 0 6 ??g/l and 84 to 100% for an estuarine sample spiked in the field with 2 ??g/l (S(-II) Positive correlations have been found between dissolved S(-II) concentrations and concentrations of dissolved Cd, Cu, and Ni, negative correlations have been found between bisulfide (HS-) activity and activities of Cd2+, Cu2+, and Ag+ species ?? 1984 Springer-Verlag New York Inc.

Explore related subjects

Environmental Geology and Water SciencesArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D.V. Vivit, J.W. Ball, E. A. Jenne. 1984. Specific-lon electrode determinations of sulfide preconcentrated from San Francisco Bay waters. https://doi.org/10.1007/bf02509914

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS1992

Selenium mobilization in a surface coal mine, Powder River Basin, Wyoming, U.S.A.

Elevated concentrations (0.6-0.9 mg/l) of selenium were detected in the groundwater of a small backfill area at a surface mine in the Powder River Basin, Wyoming. This report focuses on the source of selenium, its modes of occurrence in overburden deposits and backfill groundwater, and its fate. The immediate source of the selenium appeared to be the dissolution of preexisting soluble salts from the unsaturated zone of the overburden. The ultimate source of selenium was probably the oxidation of selenium-bearing pyrite in the geologic past. Overburden was placed partially in the saturated zone of the backfill where, upon resaturation, soluble salts dissolved in the groundwater. Water standing in the pit at the time of backfilling might have contributed to the elevated concentrations of selenium and other solutes. Selenium was found in an ash-rich coal and in clastic sediments in seven different modes of occurrence. The concentration of soluble selenium in the groundwater at this site has been decreasing since monitoring began in late 1982, and at the present rate of decrease, the concentration should drop below the State of Wyoming guideline of 0.05 mg/l for selenium in water intended for use by livestock by about mid-1992. The decrease in soluble selenium concentration may in part be due to microbially assisted reduction of selenate followed by sorption on clays and other sorbents. ?? 1992 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1992

Statistical analysis of the radon-222 potential of rocks in Virginia, U.S.A.

More than 3,200 indoor radon-222 (222Rn) measurements were made seasonally in an area of about 1,000 square kilometers of the Coastal Plain and Piedmont physiographic provinces in Virginia, U.S.A. Results of these measurements indicate that some geological units are associated, on the average, with twice as much indoor222Rn as other geological units, and that indoor222Rn varies seasonally. The Kruskal-Wallis test was used to test whether indoor222Rn concentrations for data gathered over the winter and summer seasons differ significantly by rock unit. The tests concluded that indoor222Rn concentrations for different rock units were not equal at the 5-percent significance level. The rocks associated with the highest median indoor222Rn concentration are specific rocks in the Mesozoic Culpeper basin, including shale and siltstone units with Jurassic diabase intrusives, and mica schists in the Piedmont physiographic province. The pre-Triassic Peters Creek Schist has the highest ranking in terms of indoor222Rn concentration. The rocks associated with the lowest indoor222Rn concentrations include coastal plain sediments, the Occoquan Granite, Falls Church Tonalite, Piney Branch Mafic and Ultramafic complex, and unnamed mafic and ultramafic inclusions, respectively. The rocks have been ranked according to observed222Rn concentration by transforming the average rank of indoor222Rn concentrations to z scores. ?? 1992 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1992

A model for the assessment of aquifer contamination potential based on regional geologic framework

The texture and three-dimensional framework of geologic materials should be considered in assessments of groundwater's vulnerability to contamination because geology controls the movement of contaminants and groundwater and influences groundwater quality. Contaminants are introduced into, transmitted through, and stored by geologic materials. We present a model that identifies aquifers and ranks sequences of geologic materials by their relative potential for transmitting water and contaminants from land surface. With this basis, the model can be used to assess the potential for contamination of aquifers by surface activities such as landfitling of wastes or application of agricultural chemicals. A regional map of aquifer contamination potential can be generated from the model; it retains the geologic map information intact and available for reinterpretation or other uses. The model was developed using broad, regional map information and is intended to be a general tool for assessing the regional vulnerability of aquifers to contamination. It is not intended for local, site-specific use, but for prioritizing local areas where contamination potential and/or land-use history warrant more detailed assessment or monitoring. Because it provides a regional view of contamination potential, regional patterns or trends of map units should be evaluated, rather than using the map information literally to assess local areas. Methods of applying this model and contamination potential map to groundwater protection and management are currently being studied; research includes an attempt to statistically validate the model with water-quality data, and to identify natural groupings of the ranked contamination potential map units. ?? 1992 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗