Geology topics

Research about United States

Source-linked reports with geographic coverage including United States.

1,087 records · Page 17Linked to original sources

USGS2025

Insights into widespread landsliding in southern Appalachia from Hurricane Helene

Between 23 and 27 September 2024, antecedent rain followed by Hurricane Helene produced one of the most damaging weather events in southern Appalachia history. The back-to-back storm events resulted in a maximum cumulative rainfall of 848 mm and hurricane-force wind gusts over 170 km/h in western North Carolina, eastern Tennessee, and southwestern Virginia. The resulting regional flooding, landslides, and tree blowdown caused over 100 fatalities, damaged or destroyed critical infrastructure and thousands of structures, and severed connectivity across the region. Over the next several weeks, a multi-agency landslide response produced a rapid hazard assessment and mapped 2217 landslides, 55% of which damaged infrastructure or property. Orographic uplift enhanced rainfall, resulting in concentrated landsliding along the ~250 km swath of the Blue Ridge escarpment in western North Carolina. Landslides initiated predominantly on windward-facing (southeast-facing) slopes, and localized clustering of initiation points indicated a strong influence of hillslope-scale meteorological and geomorphic factors. Many shallow landslides mobilized into larger, highly mobile, and damaging debris flows that graded into floods. Here, we put our preliminary observations in the context of historical storm-driven landslide events and open new avenues for investigating the nature and extent of landslides and their effects in southern Appalachia and similar environments.

Georgia, North Carolina, South Carolina, Tennessee↗

USGS2025

Hydrogeologic characterization of the Cahuilla Valley and Terwilliger Valley Groundwater Basins, Riverside County, California

The relation between the groundwater and the amount of natural recharge to the Cahuilla Valley and Terwilliger Valley groundwater basins is not well understood. During the 20th century, the reliance on groundwater near Anza, California, used for agricultural, domestic, and municipal reasons has increased, and there is the potential for changes in groundwater availability related to climate change. Several types of existing data were evaluated, and new data were collected for this study, with the goal of characterizing the region’s hydrogeology. The study’s scope included constructing a geologic framework model to show where the groundwater-bearing units are present and their relation to each other, estimating the major components of the groundwater budget, and understanding local short-term and regional long-term groundwater flow and how that has changed since the early 1900s. Two electrical resistivity tomography surveys were done in the Durasno Valley about 2,150 feet apart to identify the thickness of the alluvium, its horizontal extent, and the depth-to-basement along two profiles perpendicular to Cahuilla Creek. The subsurface sediments were mostly horizontally layered and the transitional boundary between the alluvium and basement was thinner and shallower along the upgradient profile where the depth-to-basement was about 70 feet below land surface; the depth-to-basement at the downgradient profile was more than about 140 feet below land surface. The results from the surveys were used to place four monitoring wells at two sites along the survey profiles. Artesian flow from the deepest well at the downgradient site indicated that the decomposed and competent basement likely contributed some groundwater to the overlying alluvium, laterally, from below, or both. A digital three-dimensional geologic framework model was constructed using EarthVision software to represent the subsurface geometry of the alluvium, decomposed basement, and competent basement. Maps and cross sections of the modeled thicknesses of the alluvium and decomposed basement, and the modeled elevation of the top of the competent basement, were made to show the subsurface geometry of vertical faults, selected wells, and the groundwater-bearing units. Because natural recharge is related to the variable cycles of precipitation, estimates are difficult to quantify. Recharge and runoff have extreme interannual variability in the study area; recharge and runoff can be sporadic, and a substantive amount may not occur in some years. Estimates of recharge from a previous study and the regional-scale Basin Characterization Model for California for four different periods ranged from 3,800 acre-feet/year for 1897–1947 to 5,900 acre-feet/year for 1971–2000. Potential recharge from the disposal of domestic septic systems may have been as much as 500 acre-feet in 2020. It was estimated that between about 400 and 2,400 acre-feet/year of groundwater is lost through evapotranspiration by vegetation and evaporation from open water bodies, but the main source of discharge is through pumpage, mainly used for agriculture from the alluvium in the Cahuilla Valley and Terwilliger Valley groundwater basins. The estimated total pumpage for 1991–2021 ranged from about 1,140 acre-feet in 2019 to about 3,450 acre-feet in 1994. When summed, the cumulative amount of estimated pumpage between 1991 and 2021 was about 81,400 acre-feet. The general direction of groundwater flow is from the northeast along the San Jacinto fault zone at the headwaters of Cahuilla and Hamilton Creeks, to the surface-water outlets at the west and southeast parts of the study area. Groundwater-level data from the 1950s and earlier indicate that there was a natural groundwater divide between the Cahuilla Valley and Terwilliger Valley groundwater basins, but the changing magnitude and extent of the groundwater depressions caused by pumping since about 1950 indicate that the location of the natural groundwater boundary between the Cahuilla Valley and Terwilliger Valley groundwater basins has migrated over time. Flow from the upper to the lower parts of the Cahuilla Valley groundwater basin roughly follows the course of Cahuilla Creek through the narrow Durasno Valley where an estimated volume of flow in April 2019 was about 10–150 acre-feet/year. Short-term trends in groundwater levels, particularly in wells where groundwater is shallow and in the basement unit, show how some areas respond quickly to recharge and discharge. Wells located further to the east within the Cahuilla Valley groundwater basin in the alluvium show much less of a response to recharge events; areas of sustained pumpage from the alluvium, primarily for agriculture, show long-term declines in groundwater levels and generally do not show the effects of storm events or recent runoff. Groundwater levels in wells that are farthest from where most of the recharge occurs and where pumping has been the greatest, had some of the largest long-term groundwater-level declines at a rate of about 0.8 foot/year between 1971 and 2021.

California↗

USGS2025

A probabilistic assessment methodology for the evaluation of geologic energy storage capacity—Natural gas storage in depleted hydrocarbon reservoirs

The need for energy storage, particularly underground, where capacity and duration may far exceed battery storage technologies, is especially relevant given the increasing demands for reliable power alongside the development of intermittent renewable electricity sources. Geologic energy storage facilities already exist, and expanded use would enable storing gases such as methane and hydrogen. In 2018, a National Academies of Sciences, Engineering, and Medicine report, “Future Directions for the U.S. Geological Survey's Energy Resources Program,” recommended that the U.S. Geological Survey (USGS) prioritize assessing underground energy storage in geologic formations in the United States. The U.S. Geological Survey has since developed a methodology for assessing natural gas storage capacities in depleted hydrocarbon reservoirs on a national scale. The methodology introduced in this report prescribes three approaches for calculating gas storage capacity. This methodology relies on the availability of input data, including cumulative hydrocarbon production records, reservoir petrophysical properties, and reservoir pressure data. Assessment inputs can be obtained from public, State-level databases and propriety national-scale databases, although the use of analogs could be warranted for estimating input parameters. Probabilistic assessment results are aggregated to play, petroleum province, regional, and national scales. The steps defined in this report are demonstrated on the Michigan Basin Province, which includes the Mississippian Sandstone Gas Play and the Clinton Structural Play. This methodology could be used to systematically and consistently assess hydrocarbon plays and provinces for natural gas storage capacity across the United States.

Michigan↗

USGS2025

A comprehensive geologic framework of the National Crustal Model for seismic hazard studies in the conterminous United States

A three-dimensional (3D) geologic framework has been developed for the conterminous United States (U.S.) as part of the U.S. Geological Survey National Crustal Model to enhance seismic hazard modeling. The geologic framework is created from geologic maps and multiple subsurface geologic unit boundaries including the base of the Miocene, Cenozoic, Phanerozoic, and the Mohorovičić discontinuity. Modifications are made to surficial geologic maps to remove discontinuities across state and country borders. The subsurface distribution of rock type and age is extrapolated from the surface, seeded with subsurface geologic information, and constrained by a map of basement geology. The framework provides the basis for estimates of subsurface seismic velocity and density that is needed to improve estimates of earthquake ground shaking and seismic hazard. The present framework greatly expands and updates a previously published 3D geologic framework of the western part of the U.S. that was itself a first-of-its-kind digital 3D portrayal of the nation.

conterminous United States↗

USGS2025

Shallow geologic framework of the Mississippi Sound and the potential for sediment resources

The Mississippi Sound, an estuarine environment located between the mainland and barrier islands bordering the northern Gulf of America (formerly the Gulf of Mexico), serves as a vital ecosystem for the States of Mississippi and Alabama. Spanning approximately 100 kilometers from east to west and covering 1,400 square kilometers, the sound is home to marine industry and ports, and its shallow and brackish waters sustain a diverse array of marine life. Barrier islands along the southern edge of the sound separate the microtidal estuary from the Gulf of America. This protection from gulf wave action mediates current flow within the sound, resulting in predominantly fine-grained sediment deposition along the seafloor. This study, conducted by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers, provides insight on fluvial and tidal processes spanning the past 5,000 years. The report synthesizes existing research to provide a comprehensive overview of the sound geology, from Pleistocene origins to present-day morphology, and utilizes high-resolution single channel seismic profiles and sediment data to identify and map sedimentary deposits and morphologic features at and below the seafloor. Despite its ecological significance, the Mississippi Sound faces environmental challenges, including water-quality issues, habitat degradation, storm-induced erosion, and the ongoing threats of sea-level rise and environmental changes. This study uses the present-day understanding of the sound's geology to inform coastal management decisions, hazard assessment, and potential mineral resources.

Louisiana, Mississippi↗

USGS2025

U.S. Geological Survey—Department of the Interior, Region 11, Alaska—2023–24 biennial science report

Introduction U.S. Geological Survey (USGS) Mission—The USGS national mission is to monitor, analyze, and predict the current and evolving dynamics of complex human and natural Earth-system interactions and to deliver actionable information at scales and timeframes relevant to decision makers. Consistent with the national mission, the USGS in Alaska provides timely and objective scientific information to help address issues and inform management decisions across five interconnected focus areas: Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Ecosystems. The USGS in Alaska consists of approximately 350 scientists and support staff working in 3 Alaska-based science centers. USGS science activities are also initiated by the Cooperative Research Unit and USGS centers outside Alaska. In the last 5 years, USGS research in Alaska has produced many scientific benefits resulting from more than 900 publications. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.usgs.gov/.

Alaska↗

USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗

USGS2025

Multi-scale geophysical mapping of the brine and bedrock surfaces along the Dolores River, Paradox Valley, Colorado, December 2023

Total dissolved solids derived from salt dome–sourced brine in the underlying alluvial aquifer substantially increase with distance in the reach of the Dolores River that passes through Paradox Valley in southwestern Colorado. The area has been the site of salinity control operations since the 1990s to reduce salt loading to the downstream Colorado River. Previous airborne and ground/water-based electromagnetic (EM) geophysical data have successfully mapped the top of the brine surface, albeit with relatively coarse near-surface resolution and limited spatial coverage. This present December 2023 study used ground-based high-resolution EM and passive seismic (horizontal-to-vertical spectral ratio, HVSR) tools to map in detail the depth and thickness of the brine zone in the alluvial aquifer (top of the brine down to bedrock contact) in areas immediately surrounding the Dolores River where previous airborne EM (AEM) results indicated brine within 10 m of land surface. Results indicate the deepest bedrock is generally associated with the shallowest brine and local depressions in the collapse breccia (caprock to the Paradox Formation salt) may facilitate vertical migration of brine into the alluvial aquifer. Additionally, the ground-based EM mapping corroborated general patterns in depth to brine that were observed in previous AEM results while also revealing additional detail, including suspected focused brine discharge zones to the Dolores River. A river-based survey wherein EM data, channel depth and river water–specific conductance information were collected augmented these findings and indicated specific areas on both the western and eastern sides of the river where focused brine discharge may occur. This study comprises a large-scale, ground- and water-based geophysical mapping effort, including hundreds of HVSR soundings and 100s of kilometres of EM data, which were successfully translated into digital brine and bedrock surfaces that could be incorporated into groundwater modelling efforts, future well siting or other decision-making.

Colorado↗

USGS2025

High frequency and region-scale simulations of large (Mw7+) earthquakes on the southern Whidbey Island fault, Washington, USA

We simulate ground shaking in western Washington State from hypothetical M w 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region‐specific soil velocity models. We run simulations with varying model resolutions, including regional‐scale simulations with a maximum‐modeled frequency of ∼1 Hz and local‐scale simulations with a maximum‐modeled frequency of ∼2.5 Hz. Additional local‐scale simulations are run considering high‐resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short‐period ( T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long‐period shaking ( T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra‐ and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.

Washington↗

USGS2025

Noble and base metal distribution and processes affecting ore tenors in the disrupted lower stratigraphy of the Stillwater Complex, USA

Exploration continues for contact-style Ni-Cu sulfide and chromitite-associated PGE mineralization in ultramafic rocks of the Stillwater Complex. At the Iron and Chrome Mountain areas, massive sulfides occur along the complex’s footwall contact and anomalous concentrations of PGE+Au are associated with the three lowermost chromitite seams. Southeast of Chrome Mountain, magmatic layering is highly disrupted by the presence of faults, magmatic breccias, serpentinized discordant dunites, pyroxenite pegmatoids, and disaggregated chromitite seams. The bulk rock chemistry, sulfide chemistry, and noble metal mineralogy of samples from this area were examined to determine the deportment of PGE and processes that led to enrichments in PGE, Au, Cu, Co and Ni. Results show that a sulfide liquid was the principal collector of PGE. If sulfide liquid was initially deposited with chromite, it was disaggregated or redistributed by subsequent melt or fluid infiltration, which may have resulted in the offset of peak PGE(+Cu, Ni) from peak Cr 2 O 3 concentrations, and upgraded PGE tenors. Upon cooling, PGE exsolved from sulfides to form discrete bismuth tellurides, arsenides, arsenic sulfides, antimonides, and alloys, commonly along the margins of sulfide globules. Calculated metal tenors are highest in the disseminated sulfides southwest of Chrome Mountain, whereas massive and net-textured sulfides near the Iron Mountain-Camp zone represent monosulfide solid solution cumulates. At progressively shallower levels, higher metal tenors combined with lower S/Se ratios are consistent with increasing R-factors from 100 to 100,000. Serpentinization and talc-tremolite alteration resulted in S loss through partial replacement of sulfides by secondary silicate+carbonate+magnetite+sulfide assemblages, further upgrading Ni-Cu-PGE tenors. The present work shows that processes responsible for the disruption of magmatic layering and post-magmatic fluid alteration along the intrusion’s lower contact led to noble and base metal enrichments.

Montana↗

USGS2025

Memory and jamming in fault zone sediments

Many subsurface processes involve transitions in granular material states, from arrested to creeping to flowing. Experiments and frameworks for idealized systems reveal that granular fabrics develop during shearing, co-evolve with applied stress, and govern such transitions. We use microtomography to test whether fabrics at two San Andreas fault sites reflect slip history and whether idealized frameworks extend to nature. Near-surface sediments within the fault zone transition between deformation patterns over the seismic cycle, including bulk/localized grain re-arrangements, individual grain fracturing, and localized zones of fracturing. Aseismic and co-seismic shearing produce distinct preferred grain orientations. Co-seismic fabrics can be preserved after centuries of aseismic strain, aseismic fabrics may be overprinted, and grain size and coordination number influence the fabrics. Idealized frameworks, namely anisotropic critical state theory, frictional jamming, and material memory, can explain our observations, and fault zone sediments likely undergo cycles of memory creation and erasure that influence rigidity spatiotemporally.

California↗

USGS2025

USGS—An Unparalleled Scientific Asset

The U.S. Geological Survey (USGS) delivers information critical to powering our economy, managing our natural resources, and keeping Americans safe and healthy. 1 Mapping the Nation $21B Geologic maps save users an estimated 15% in annual costs: a value of between $14B and $21B. $25.6B in annual value to users of imagery from Landsat satellites, which were codeveloped by NASA and the USGS and operated through their lifespans by the USGS. $13.5B in annual benefits is generated by the USGS's 3D Elevation Program. Securing America’s Energy Independence 44% USGS-identified undiscovered geothermal energy is equal to 44% of current U.S. electricity generation. 29.4B barrels of oil and 391.6 trillion cubic feet of gas in recoverable resources are available on U.S. public lands based on USGS assessments. Protecting Americans’ Health and Safety $424B in recent wildland fire damages highlight the need for USGS fire science, which supports efforts to protect communities and reduce risk. USGS earthquake, volcano, landslide, and coastal hazard monitoring and information save lives and minimize costs; for example, $2.8M can be saved because of USGS enhanced information about a Mauna Loa eruption. $4.5B is the estimated cost of annual flooding. Through a network of over 11,885 streamgages, the USGS supports public safety and enables forecasts, early warning systems, and management actions that protect lives and property. Supporting National Security $3.1B The USGS identified a $3.1B risk to the American economy if China restricts gallium imports. This is one example underscoring the importance of the USGS mapping critical minerals, investigating supply chains, and producing the Nation’s critical minerals list. Enhancing Our Lands and Waters $21B in estimated annual costs results from invasive species. The USGS’s invasive species research informs approaches used to reduce their effects on agriculture, water infrastructure, disease transmission, fisheries, and outdoor recreation. USGS innovations support early warnings for harmful algal blooms—over $2M in yearly benefits are provided to Kansas alone. $45B USGS science informs the management of big game (such as deer and elk). The big-game hunting industry contributes $45B to the U.S. economy. Fostering American Prosperity $4.1T Mineral commodities are necessary for the $4.1T in value added to the GDP by major industries that consume processed mineral materials and employ 1 million workers. Because of this, USGS data on mineral supply, demand, and trade are highly valued. 45,000 metric tons Rare earths power the growing technology economy, including cell phones, electric vehicles, and medical devices. For over 70 years, USGS work has supported the discovery of rare earth resources in California’s Mountain Pass area, which produced 45,000 metric tons of rare earth concentrates in 2024—over 11% of the global supply. Guarding American Food Security $70.2B USGS science informs early warning systems and management strategies to mitigate disease outbreaks in agriculture—critical research on highly pathogenic avian influenza, for example, helps safeguard the $70B value in poultry and egg production. $11.8B USGS groundwater tools are vital for agriculture; for example, in the Mississippi Alluvial Plain, 65% of farming relies on groundwater to support its $11.8B annual industry. 1 Values throughout are given in billions (B), millions (M), and trillions (T) of U.S. dollars. GDP is “Gross Domestic Product.” Percentages are shown as %.

General Information Product↗

USGS2025

Persistent deep long-period seismicity near the Lassen Volcanic Center

Deep long-period (DLP) earthquakes have been observed at many volcanic settings around the world and linked to the magmatic processes that drive volcanic unrest. At the Lassen Volcanic Center (LVC) of the Cascade arc, limited detection of DLP activity hinders classification of anomalous seismic behavior and its relationship to the LVC magmatic system. This study uses a template matching approach with seismic data from temporary nodal and permanent stations to detect and locate DLP earthquakes near the LVC between 2017 and 2024. Within the DLP catalog of 611 events, a transition occurs from scattered (2017–2020) to oscillatory (2021–2024) occurrence rates. During the oscillatory period, regional earthquakes with large amplitude velocity waveforms observed near the LVC are associated with abrupt changes in DLP occurrence rates. Continued monitoring of DLP activity has the potential to better define the processes that drive volcanic unrest at the LVC in the future.

California↗

USGS2025

Approximate inland extent of saltwater intrusion at the base of the Biscayne aquifer, Miami-Dade County, Florida, 2022

Miami-Dade County is part of a densely populated urban corridor in southeastern Florida. The Biscayne aquifer serves as Miami-Dade County’s primary drinking water source and is characterized by highly permeable karstic limestone and carbonate sand. The aquifer’s coastal location and permeable nature make it susceptible to saltwater intrusion. Monitoring the current inland extent and the rate of movement of the saltwater front in the aquifer can inform management strategies for conserving the long-term sustainability of the county’s water supply. In the 1950s, the U.S. Geological Survey published a map of the inland extent of saltwater intrusion in the Biscayne aquifer and has continued to update this map to monitor changes over time, with the most recent update published in 2018. An updated map has been created showing the approximate inland extent of saltwater intrusion in the Biscayne aquifer in eastern Miami-Dade County in 2022, with the 2018 extent shown for comparison. The inland extent of saltwater intrusion was mapped through the interpretation of borehole electromagnetic induction logs and measurements of chloride and specific conductance in groundwater samples. The location of the saltwater interface at the base of the Biscayne aquifer was represented by the 1,000-milligram-per-liter isochlor. This report describes changes in the location of the saltwater interface from 2018 to 2022. By 2022, the saltwater interface had moved farther inland in both the northern and southern parts of the county, advancing by as much as 0.3 kilometer in the north and up to 0.8 kilometer in the Model Land Area to the south. However, it remained relatively unchanged from its 2018 position in the east-central part of the county.

Florida↗

USGS2025

Conceptual and numerical groundwater flow model of the Iowa River alluvial aquifer near Tama County, Iowa, 1980 through 2022

The Iowa River alluvial aquifer is an important source of water on the Meskwaki Settlement in Tama County, Iowa, which is land owned by the Sac & Fox Tribe of the Mississippi in Iowa (commonly known as the Meskwaki Nation). The U.S. Geological Survey constructed a groundwater flow model, including a conceptual and numerical model, of the Iowa River alluvial aquifer and underlying hydrogeologic units near the Meskwaki Settlement in Tama County, Iowa, for the period of January 1980–August 2022 to estimate the fraction of water pumped from the Iowa River alluvial aquifer by Meskwaki Settlement wells that is derived from streamflow depletion in the Iowa River and its tributaries. Streamflow depletion is a reduction in streamflow caused by groundwater pumping and includes the interception by groundwater production wells of water that otherwise would have been discharged to streams (called “captured groundwater discharge”) and induced infiltration of streamflow to the production wells. Calibrated model runs were performed with no simulated pumping and simulated pumping only at Meskwaki Settlement wells, and the change in simulated flow rates between the groundwater system and streams for the two model runs represents the amount of streamflow depletion in the Iowa River and tributary streams resulting from pumping at the Meskwaki Settlement wells. Streamflow depletion in the Iowa River and its tributaries as a percentage of simulated pumping at the Meskwaki Settlement wells was calculated by dividing this difference by the total simulated pumping rate for the Meskwaki Settlement wells. The model results demonstrate that the mean monthly streamflow depletion, including induced infiltration and captured discharge, in the Iowa River and its tributary streams as a percentage of mean monthly pumping at the Meskwaki Settlement wells was 97.4 percent and ranged from 65.4 to 112 percent. Of the total streamflow depletion, mean monthly induced recharge was 20.9 percent and ranged from 4.9 to 37.2 percent. Mean monthly captured discharge was 76.5 percent and ranged from 57.1 to 97.1 percent. These results indicate that most of the water pumped from the Meskwaki Settlement wells is the result of streamflow depletion, in the form of both induced infiltration and captured discharge.

Iowa↗

USGS2025

Geochemical and hydrological investigations of historical data collected at the Lee Acres Landfill and Giant Bloomfield Refinery, New Mexico, 1985–2020

The Lee Acres Landfill and Giant Bloomfield Refinery are adjacent properties near the City of Farmington, New Mexico, each having undergone monitoring and remediation related to historical site activities. At the landfill, site cleanup has included the installation of a capillary barrier over former liquid waste lagoons and periodic monitoring of groundwater elevations and groundwater quality. At the refinery, remediation has focused on several petrochemical and crude oil release areas and included soil excavation, groundwater treatment, and regular monitoring of groundwater elevations and quality. Groundwater at both sites has higher concentrations of volatile organic compounds and trace metals than background aquifer concentrations. In 2022, the U.S. Geological Survey compiled the Lee Acres-Giant Bloomfield Refinery Database (LAGBRD), which contains publicly available groundwater-elevation data and organic and inorganic groundwater-quality data from both sites, spanning from 1985 to 2020. Data from the LAGBRD and precipitation data from other sources were used to better understand the cause of relatively high manganese concentrations observed in some groundwater wells at the site through comparison of groundwater chemistry to chemical end members, interpretation of spatial and temporal patterns in the groundwater chemistry, and interpretation of groundwater flow properties. In this study, elevated chloride concentrations in groundwater downgradient from the landfill have been attributed to landfill leachate based on the temporal and spatial variability of chloride concentrations and chloride-to-bromide ratios. Installation of a capillary barrier and surface-water runoff controls at the landfill in 2005 appears to have altered infiltration patterns at that site, resulting in a decrease in chloride at some wells but an increase in chloride and dissolved manganese at others. The timing and relation among groundwater elevation, chloride concentration, and manganese concentration suggest that leachate stored in the vadose zone provides a continued source of contamination to groundwater.

New Mexico↗

USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗

USGS2025

Simulation of groundwater flow in Wake County, North Carolina, 2000 through 2070

In 2019, the U.S. Geological Survey and Wake County Environmental Services began a collaborative study to evaluate groundwater resources and long-term groundwater availability in the county’s fractured-rock groundwater system. Wake County, in central North Carolina, is experiencing rapid population growth, associated land development, and changing water use. Hydrogeologic data including groundwater levels, aquifer testing, borehole fracture flow measurements, water-quality samples, and groundwater age-dating tracers were collected, along with findings from previous investigations, to help inform a conceptual model of the flow system used to develop a modular three-dimensional finite-difference groundwater-flow model (MODFLOW) for simulating historical and future groundwater conditions from 2000 to 2070. Hydraulic conductivity and transmissivity ranges were estimated from 17 slug tests and 21 borehole-flow measurements. Groundwater-quality analytical results from 19 sampling sites indicate that oxidation-reduction (redox) conditions varied within the regolith and bedrock and that minimal evaporation occurred before recharge entered the groundwater system. Age dating revealed mixtures of older and younger water, ranging from the 1940s to the 1990s—indicating variable flow pathways of recharge within permeable bedrock fracture zones. To simplify the complex fractured-rock groundwater system, two layers representing the regolith and the fractured bedrock were used in the MODFLOW model. Model calibration included parameter estimation and provided a reasonable fit to observed groundwater levels and estimated stream base flows. The model forecast scenarios incorporated future climate-model data for two emissions scenarios with land cover change projections to simulate potential impacts to future groundwater levels, recharge, and base flows. Recharge and base flow projections were largely within historical ranges, with no apparent long-term trends, but did indicate a slight downward shift in median values—likely, in part, because of differences in spatial resolution of input climate datasets. Seasonal patterns were consistent with historical data, with projections of possible increases in future winter recharge. Model limitations are discussed, and additional monitoring and model refinement needs are highlighted to support decision making for local groundwater management.

North Carolina↗