Geology topics

Research about Sinclair Inlet

Source-linked reports with geographic coverage including Sinclair Inlet.

5 recordsLinked to original sources

USGS2024

A conceptual site model of contaminant transport pathways from the Bremerton Naval Complex to Sinclair Inlet, Washington, 2011–21

Historical activities on the Bremerton Naval Complex (BNC) in Puget Sound, Washington, have resulted in Sinclair Inlet sediments with elevated concentrations of contaminants, including organic contaminants such as polychlorinated biphenyls and trace elements including mercury. Six U.S. Geological Survey–U.S. Navy datasets have been collected since the last major assessment, in 2013, of soil and groundwater contaminant transport pathways and mercury loading estimates from the BNC to Sinclair Inlet. These include: mercury isotope analysis to support sourcing of mercury in Sinclair Inlet; mercury sampling within the dry dock systems; nearshore thermal surveys to identify potential groundwater discharge locations to Sinclair Inlet; time-series monitoring in nearshore wells to understand the inland extent and dynamics of the tidal mixing zone; tidal studies of mercury in nearshore monitoring wells in an area of contaminated fill material called Site 1; and a spatial survey of trace elements and other parameters in nearshore monitoring wells, pore water, seeps, surface water, and sediment along unwalled shorelines in the western part of the BNC. The results were incorporated into an updated Conceptual Site Model and used to update contaminant load estimates from the terrestrial BNC to Sinclair Inlet. The results from these studies provide data to the U.S. Navy to support prioritization of on-going remediation actions to manage contamination on the BNC that reduce potential impacts to Sinclair Inlet sediment, surface water, and fish and shellfish tissue. Mercury isotope analysis of surface sediments and particulate material indicated that a similar industrial mercury profile is present throughout Puget Sound, including terrestrial and marine BNC samples and in other Sinclair Inlet sediments and persists across regions with low and elevated mercury concentrations. Two sources of mercury at the BNC are Sites 1 and 2 subsurface soils/fill material, with total mercury concentrations in particulates collected from the bottom of monitoring wells drilled in these materials ranging from 18,000 to 44,000 nanograms per gram (as compared to the Washington State Marine Sediment Cleanup Screening Level of 590 nanograms per gram). Contaminants are transported from the terrestrial BNC to Sinclair Inlet via three primary pathways, (1) stormwater outfalls, (2) dry dock discharges, and (3) direct discharge along unwalled shorelines. Previous loading estimates (based on filtered total mercury) ranked stormwater outfalls, particularly outfall PSNS015 in Site 2 soils, as the largest soil and groundwater contaminant transport pathway from the terrestrial BNC to Sinclair Inlet. Updated loading estimates in this report suggest that the dry dock systems may be a larger pathway of mercury from the terrestrial BNC to Sinclair Inlet than previously thought, within the same order of magnitude as the PSNS015 storm-drain system. Trace-element loads via direct shoreline discharge are difficult to estimate due to the large and dynamic tidal mixing zone of groundwater and seawater in the nearshore along unwalled shorelines. However, current best estimated ranges suggest that direct shoreline discharge is one of the three main pathways and may contribute smaller mercury loads than the stormwater and the dry dock systems. Along unwalled shorelines, direct groundwater discharge of terrestrial contaminants may be less important than recirculating seawater in the nearshore mixing zone that can extract contaminants from nearshore subsurface material. Total estimated mercury loads from the terrestrial BNC to Sinclair Inlet range from approximately 40 to 200 grams of filtered total mercury per year and a minimum of 70–350 grams of particulate total mercury per year, for a minimum total of 110–525 grams of whole (filtered plus particulate) total mercury per year. Data gaps are identified that, if filled, would further refine the Conceptual Site Model and contaminant loading estimates from the terrestrial BNC to Sinclair Inlet.

Washington↗

USGS2018

Tidal flushing of mercury from the Bremerton Naval Complex through the PSNS015 stormwater drain system to Sinclair Inlet, Kitsap County, Washington, 2011 -12

The sediments of Sinclair Inlet, in Puget Sound, Washington, have elevated levels of contaminants including mercury. The Bremerton Naval Complex is adjacent to Sinclair Inlet, and has known areas of historical soil mercury contamination. The U.S. Geological Survey, in cooperation with the U.S. Navy, has been investigating the potential for mercury sources on the Bremerton Naval Complex to recontaminate recently remediated marine sediment. In 2011–12, the U.S. Geological Survey conducted three tidal- related sampling campaigns to characterize mercury dynamics in the largest stormwater drain system on the Bremerton Naval Complex, which passes through the soils of an area known as Site 2 that has elevated soil mercury concentrations. The sampling campaigns confirmed that the stormwater drain system, PSNS015, serves as a conduit for seawater transport more than 250 m landward of the contaminated soils that subsequently facilitates mercury transport to Sinclair Inlet. During the December 2011 reconnaissance sampling campaign, no freshwater source of mercury to PSNS015 was identified. There was heavy precipitation preceding and stormwater runoff generated during the reconnaissance survey, which suggests that the primary source of mercury in PSNS015 is not precipitation-induced. During the May 2012 spring-tide sampling campaign, the water in PSNS015 drained to Sinclair Inlet during a negative low tide, and the highest filtered total mercury concentration in the stormwater drain system (60 ng/L) was measured during the lower-low tide in the freshwater flowing into the seaward-most stormwater drain vault from either up-pipe or local groundwater intrusion. Similar conditions were not observed during the June 2012 companion neap-tide sampling campaign, when the water-level elevation of the positive low tide in Sinclair Inlet dropped only slightly below the stormwater drain vault elevation, the water in the seaward-most stormwater vault was brackish rather than fresh, and the filtered total mercury concentration never exceeded 24 ng/L. Particulate total mercury concentrations and dynamics during the spring- and neap-tide sampling campaigns were variable, with higher concentrations (as much as 133 ng/L) measured throughout the neap-tide study compared to those measured during the spring-tide study (as much as 4.34 ng/L). The highest filtered total mercury concentration of all sampling campaigns (1,140 ng/L) was measured during ebb tide in a nearshore monitoring well that represents groundwater discharging from the contaminated soils directly to Sinclair Inlet along an unwalled part of the shoreline. The results suggest that mercury extracted from Site 2 soils can be carried to Sinclair Inlet during ebb tides by at least two mechanisms: (1) through groundwater directly to Sinclair Inlet along an unwalled part of the shoreline or (2) through the stormwater drain system when the water level in Sinclair Inlet drops below the water level in the stormwater drain system. The data can be used to guide future modifications to the seawall and stormwater drain system that aim to hydraulically disconnect the stormwater drain system from the surrounding contaminated soils.

Washington↗

USGS2018

Mercury methylation and bioaccumulation in Sinclair Inlet, Kitsap County, Washington

The U.S. Geological Survey evaluated the transformation of mercury to bioavailable methylmercury in Sinclair Inlet, Kitsap County, Washington, and assessed the effect of the transformation processes on the mercury burden in marine organisms and sediment. In August 2008, samples of sediment, water, and biota from six sites in Sinclair Inlet and three bays representative of Puget Sound embayments were collected. The extensive sediment sampling included analysis of methylmercury in sediment and porewater, estimates of methylation production potential, and analyses of ancillary constituents associated with organic carbon and reduction-oxidation (redox) conditions to assist in interpreting the mercury results. Analyses of methylmercury in water overlying incubated cores provided an estimate of the release of methylmercury to the water column. Collection of samples for mercury species in the aqueous, particulate (suspended solids), and biological phases, and for ancillary carbon and nitrogen constituents in surface water, continued, on about a monthly schedule, at four stations through August 2009. In February, June, and August 2009, seasonal sediment samples were collected at 20 stations distributed between greater Sinclair Inlet and Operable Unit B Marine of the Bremerton naval complex, Bremerton, Washington, to examine geographical and seasonal patterns of mercury biogeochemistry of sediment in Sinclair Inlet. At six of these seasonal sediment stations, porewater was collected and triplicate core incubation experiments were done. Median sediment-methylmercury concentrations were not statistically different between the representative bays and Sinclair Inlet. The percentage of sediment methylmercury (relative to total mercury) was actually lower in the Sinclair Inlet sites compared with the representative bays, reflecting the higher sediment total mercury concentration for the Sinclair Inlet stations compared with the representative bays. Likewise, median sediment methylmercury concentrations were not statistically different between the greater Sinclair Inlet stations and the Bremerton naval complex stations; whereas the percentage of sediment methylmercury to total mercury was lower in the Bremerton naval complex due to higher sediment total mercury concentrations than the greater Sinclair Inlet stations. The biogeochemical characteristics of each station, measured by redox, organic carbon, and the seasonal availability of nutrients controlled methylmercury biogeochemistry. Mercury methylation production potential was a function of temperature, concentration of total mercury in sediment, and the percentage of ferrous iron (relative to total measured iron) across all sites. Methylmercury porewater concentrations were best described by using concentrations of dissolved organic carbon and reduction-oxidation conditions. Likewise, the variable fluxes of methylmercury from incubated cores were best described using dissolved organic carbon and reduction-oxidation conditions. Sinclair Inlet exhibited the classic Puget Sound biological cycle, with spring and autumn phytoplankton blooms resulting in depletion of nitrate, orthophosphate, and silicate in the surface water. Although variable in timing between 2008 and 2009, a strong corresponding seasonal trend of increased availability, incorporation, and bioaccumulation of methylmercury into the food web of Sinclair Inlet occurred during the early spring and summer growing season.

Washington↗

USGS2012

Mercury species and other selected constituent concentrations in water, sediment, and biota of Sinclair Inlet, Kitsap County, Washington, 2007-10

This report presents data collected for two U.S. Geological Survey field sampling projects related to mercury (Hg) in Sinclair Inlet: (1) the Watersheds Sources Project that evaluated the sources of mercury to Sinclair Inlet during December 2007 to March 2010, and (2) the Methylation and Bioaccumulation Project, a comprehensive examination of mercury biogeochemistry in sediment, water, and zooplankton during August 2008–February 2010. For the Watershed Sources project, nonpoint and point sources of mercury to Sinclair Inlet from the Bremerton naval complex (BNC) were evaluated by using filtered total mercury and particulate total mercury measured in water samples collected from 11 wells, 2 dry dock sump discharges, and a steam plant's effluent at the BNC. Methylmercury sources to the inlet were examined by determining filtered methylmercury concentrations in water samples collected from five wells, two dry dock sump discharges, a steam plant's effluent, five intertidal piezometers, and three stormwater drains on the BNC, as well as in samples from five creeks, two wastewater treatment facilities, and three stormwater drains in the Sinclair Inlet watershed outside of the BNC. An improved understanding of tidally modulated mercury migration to Sinclair Inlet from the BNC was gained through three intensive nearshore (tidal) sampling events of mercury species in groundwater and a nearby stormwater drain. The Methylation and Bioaccumulation Project included a comprehensive field study of mercury biogeochemistry in marine sediment, water, and zooplankton in Sinclair Inlet. Mercury, iron, and sulfur species in sediment porewater from six sites within and three sites outside of Sinclair Inlet were measured to provide insight into the processes that produce methylmercury in the sediments. Total mercury, methylmercury, dissolved organic carbon, and redox-sensitive species were measured in porewaters in the top 2 centimeters of sediment, and these data were paired with sedimentary flux measurements from core incubation experiments to connect sedimentary processes to the water column. A broad-scale study of mercury methylation potential and mercury species at 20-plus stations in Sinclair Inlet was conducted in February 2009 and 2010, June 2009, and August 2009. Sedimentary flux measurements and analysis of mercury and biogeochemicals in sediment porewater and bottom water were made at six of the broad-scale stations. Bioaccumulation processes in the water column in the context of the sedimentary flux of methylmercury were examined using monthly survey data collected between August 2008 and August 2009. The survey data included concentrations of methylmercury and isotope ratios of carbon and nitrogen in bulk zooplankton measured at four stations in Sinclair Inlet in the context of the population of bulk zooplankton ascertained by taxonomical identification. The analysis of filtered total mercury, total particulate mercury, filtered methylmercury, particulate methylmercury, chlorophyll a, isotopes of carbon and nitrogen in suspended matter, and other biogeochemical data will facilitate the examination of the biogeochemistry of mercury in Sinclair Inlet.

Washington↗

USGS2012

Sources and sinks of filtered total mercury and concentrations of total mercury of solids and of filtered methylmercury, Sinclair Inlet, Kitsap County, Washington, 2007-10

The majority of filtered total mercury in the marine water of Sinclair Inlet originates from salt water flowing from Puget Sound. About 420 grams of filtered total mercury are added to Sinclair Inlet each year from atmospheric, terrestrial, and sedimentary sources, which has increased filtered total mercury concentrations in Sinclair Inlet (0.33 nanograms per liter) to concentrations greater than those of the Puget Sound (0.2 nanograms per liter). The category with the largest loading of filtered total mercury to Sinclair Inlet included diffusion of porewaters from marine sediment to the water column of Sinclair Inlet and discharge through the largest stormwater drain on the Bremerton naval complex, Bremerton, Washington. However, few data are available to estimate porewater and stormwater releases with any certainty. The release from the stormwater drain does not originate from overland flow of stormwater. Rather total mercury on soils is extracted by the chloride ions in seawater as the stormwater is drained and adjacent soils are flushed with seawater by tidal pumping. Filtered total mercury released by an unknown freshwater mechanism also was observed in the stormwater flowing through this drain. Direct atmospheric deposition on the Sinclair Inlet, freshwater discharge from creek and stormwater basins draining into Sinclair Inlet, and saline discharges from the dry dock sumps of the naval complex are included in the next largest loading category of sources of filtered total mercury. Individual discharges from a municipal wastewater treatment plant and from the industrial steam plant of the naval complex constituted the loading category with the third largest loadings. Stormwater discharge from the shipyard portion of the naval complex and groundwater discharge from the base are included in the loading category with the smallest loading of filtered total mercury. Presently, the origins of the solids depositing to the sediment of Sinclair Inlet are uncertain, and consequently, concentrations of sediments can be qualitatively compared only to total mercury concentrations of solids suspended in the water column. Concentrations of total mercury of suspended solids from creeks, stormwater, and even wastewater effluent discharging into greater Sinclair Inlet were comparable to concentrations of solids suspended in the water column of Sinclair Inlet. Concentrations of total mercury of suspended solids were significantly lower than those of marine bed sediment of Sinclair Inlet; these suspended solids have been shown to settle in Sinclair Inlet. The settling of suspended solids in the greater Sinclair Inlet and in Operable Unit B Marine of the naval complex likely will result in lower concentrations of total mercury in sediments. Such a decrease in total mercury concentrations was observed in the sediment of Operable Unit B Marine in 2010. However, total mercury concentrations of solids discharged from several sources from the Bremerton naval complex were higher than concentrations in sediment collected from Operable Unit B Marine. The combined loading of solids from these sources is small compared to the amount of solids depositing in OU B Marine. However, total mercury concentration in sediment collected at a monitoring station just offshore one of these sources, the largest stormwater drain on the Bremerton naval complex, increased considerably in 2010. Low methylmercury concentrations were detected in groundwater, stormwater, and effluents discharged from the Bremerton naval complex. The highest methylmercury concentrations were measured in the porewaters of highly reducing marine sediment in greater Sinclair Inlet. The marine sediment collected off the largest stormwater drain contained low concentrations of methylmercury in porewater because these sediments were not highly reducing.

Washington↗