Geology Reports⌕ Search

Geology topics

Research about Pakistan

Source-linked reports with geographic coverage including Pakistan.

At least 19 recordsLinked to original sources
USGS2026

Evidence for a biological origin of uranium-rich carbon masses within the Ediacaran Salt Range Formation of Pakistan

Thucholites are unique organic structures found in igneous and sedimentary rocks composed of a U-C-rich interior enclosed by an organic outer shell. Their formation and occurrence have perplexed scientists for over 100 years. Typically, thucholites are sparse in sedimentary rocks but where found in abundance, they may be the result of rapid paleoecological disruptions, e.g., volcanic ashfall. Here, we evaluated thucholites from the Ediacaran Salt Range Formation of the Indus Basin in Pakistan using field emission scanning electron microscopy (FESEM) and nanoscale secondary ion mass spectroscopy (NanoSIMS) to propose a two-stage mechanism for thucholite development. NanoSIMS results suggest organic matter in thucholite cores formed by biological fractionation (represented by the presence of lighter 13 C/ 12 C and 34 S/ 32 S) while the outer organic mantle formed via radiolysis-induced polymerization. FESEM elemental analysis confirms compositional differences between the two thucholite components (core and mantle), further implying their contrasting origins. Dimensional comparison of thucholite cores and their U-bearing mineral morphologies to ancient and modern U-biomineralized microbes suggests that the thucholite cores formed from metal-biological interactions. The presence of volcanogenic biotite, alkali feldspar, and clay spherules (interpreted as devitrified volcanic glass) with thucholite suggests that the thucholite cores in the Salt Range Formation are biological responses to rapid paleoenvironmental change from volcanic eruption which preserved the fossilized morphologies of Proterozoic microorganisms.

Salt Range↗
USGS2022

Off-fault deformation in regions of complex fault geometries: the 2013, Mw7.7, Baluchistan rupture (Pakistan)

Observations of recent earthquake surface ruptures show that ground deformations include a localized component occurring on faults, and an off-fault component affecting the surrounding medium. This second component is also referred to as off-fault deformation (OFD). The localized component generally occurs on complex networks of faults that connect at depth onto a unique fault plane, whereas OFD consists of distributed fracturing and diffuse deformation of the bulk volume, and occurs over scales of hundreds of meters to kilometers around the faults. High-resolution optical image correlation presents a unique potential to characterize the complexity of the surface displacements, including on-fault displacements and OFDs. In this study, we used sub-pixel correlation of 0.5-m resolution optical images to measure the surface displacement field with a <20 cm accuracy for a 30-km long section of the 2013 M w 7.7 Baluchistan, Pakistan, rupture. Our results document significant variability in the fault displacements, associated with large proportions of OFD in regions of fault geometrical complexity. Conversely, in regions where the fault geometry is simple, surface deformation is entirely accommodated by the primary faults with 0% OFD. When combining the localized deformation on faults with the OFD, we show that the total surface displacement budget is constant along the strike of the rupture, despite strong variations observed in the rupture geometry. Based on this analysis, we propose an idealized scenario of earthquake surface deformation as a function of the rupture geometrical variations.

Journal of Geophysical Research, Solid Earth↗
USGS2022

Analysis of provisioning ecosystem services and perceptions of climate change for indigenous communities in the Western Himalayan Gurez Valley, Pakistan

Climate change is a significant threat to people living in mountainous regions. It is essential to understand how montane communities currently depend especially on the provisioning ecosystem services (ES) and the ways in which climate change will impact these services, so that people can develop relevant adaptation strategies. The ES in the Gurez Valley, in the Western Himalayas of Pakistan, provide a unique opportunity to explore these questions. This understudied area is increasingly exposed not only to climate change but also to the overexploitation of resources. Hence, this study aimed to (a) identify and value provisioning ES in the region; (b) delineate indigenous communities’ reliance on ES based on valuation; and (c) measure the perceptions of indigenous communities of the impact of climate change on the ES in Gurez Valley. Semi-structured interviews and focus group discussions were used to classify the provisioning ES by using the ‘Common International Classification on Ecosystem Services’ (CICES) table and applying the ‘Total Economic Valuation (TEV)’ Framework. Results indicate that the indigenous communities are highly dependent on ES, worth 6730 ± 520 USD/Household (HH)/yr, and perceive climate change as a looming threat to water, crops, and rearing livestock ESS in the Gurez Valley. The total economic value of the provisioning ES is 3.1 times higher than a household’s average income. Medicinal plant collection is a significant source of revenue in the Valley for some households, i.e., worth 766 ± 134.8 USD/HH/yr. The benefits of the sustainable use of ES and of climate change adaptation and mitigation, are culturally, economically, and ecologically substantial for the Western Himalayans.

Gurez Valley, Himalaya↗
USGS2021

Karachi effects of the Makran earthquake and tsunami of November 1945: Mercury spilled, tide gauge impaired, seawalls overrun, boats displaced, mosque flooded

An earthquake and tsunamiI on November 28, 1945, sourced near the Makran coast of the Arabian Sea, disturbed port facilities and fishing villages to the east at Karachi Harbour. Seismic waves, some 300 kilometers from their Makran source, spilled mercury high in a lighthouse at Manora. One liter of the heavy, toxic liquid escaped from an annular trough in which one of the world’s heaviest assemblies of concentric glass prisms usually floated and revolved. Ensuing tsunami waves registered incompletely at a tide gauge, also at Manora. Prior blockage of a stilling well may have held down the recorded level of the first few waves. The highest wave went ungauged by breaking a mechanical connection between water levels and a graphing pencil. That highest wave overtopped seawalls of Keamari (Kiamari), according to newspaper accounts. The overflow reportedly flooded oil facilities, damaged 120 meters of Keamari Groyne, and destroyed a beacon on the groyne. By one account water apparently flowed from east to west in the bight south of Keamari. Interviews seven decades later elicited memories of displaced boats. In Karachi, a scion of a shipping family recalled observing, a few days after the tsunami, a pair of military landing craft atop Keamari wharves beside which the craft had been berthed, he said, as ferries serving schools of the Royal Indian Navy. In Gujarat, a former sailor and port official told of feeling the tsunami suddenly lift an ocean-going dhow that had been grounded for hull cleaning near Baba Island. Others interviewed testified to flooding in fishing villages on Baba and Bhit islands. Three independent accounts told of water entering a Bhit Island mosque. Likely water levels at the overrun seawalls, stranded landing craft, and flooded mosque all exceed the maximum wave height gauged at Manora. A tsunami like the one in 1945 would today encounter more people and developed property in Karachi’s port areas. The population of port villages has increased tenfold or more, as has the tonnage of imports and exports.

Karachi↗
USGS2020

Coal biomethanation potential of various ranks from Pakistan: A possible alternative energy source

The present study investigated the possibility of microbial transformations of coal to gas (biogasification) as an alternative to conventional coal mining because this approach has the potential to be less expensive, cleaner, and providinge greater access to deeper coal resources. Biogasification is often associated with low rank coal such as lignite and subbituminous coal that hasve produced enough coalbed methane to be commercially viable in the United States and Australia. However, little work has been done to analyze the potential of biogasification in higher rank coal. For this purpose, bioassay using a wetland-derived consortium, and a coal-derived consortium were used to analyze coal samples from Pakistan belonging to different ranks (lignite to semi-anthracite). Among all samples a low volatile bituminous coal produced the maximum methane 34.95 µmol CH4/g coal with the wetland-derived microbial consortium, followed by subbituminous coal (30.18 µmol CH4/g coal). Lower methane levels were recorded with the coal-derived consortium, with subbituminous coal yielding the highest concentration (25.1 µmol CH4/g coal). Methane levels appeared to be increasing on the last measurement indicating the coal-derived consortium was slower than the wetland-derived consortium but could still catalyze biogasification in higher rank coals. Quantitative polymerase chain reaction analysis for mcrA functional genes suggested indicated that the microbial community members that produce methane (methanogens) varied during the incubations. Energy conversion efficiency of different strategies (other biological and underground coal gasification processes) was also compared and discussed. This study was the first to compare bioassay using consortia of microbes non-indigenous and indigenous to coal and indicate the potential of biogasification from many different coalbeds across Pakistan.

Article↗
USGS2019

Vertical coseismic offsets from differential high-resolution stereogrammetric DSMs: The 2013 Baluchistan, Pakistan earthquake

The recent proliferation of high-resolution (< 3-m spatial resolution) digital topography datasets opens a spectrum of geodetic applications in differential topography, including the quantification of coseismic vertical displacement fields. Most investigations of coseismic vertical displacements to date rely, in part, on pre- or post-event lidar surveys that are intractable or non-existent in many locales. Stereogrammetric digital surface models (DSMs) derived from high-resolution satellite optical imagery provide a new avenue for the retrieval of spatially-dense vertical coseismic displacements on a global scale. In this study, we generated 2-m resolution pre- and post-seismic DSMs from satellite optical imagery spanning the 2013 Mw7.7 Baluchistan strike-slip earthquake that occurred on the Hoshab fault in southern Pakistan. We applied the Iterative Closest Point algorithm to the DSMs to quantify the coseismic vertical displacement field at a spatial resolution of 10-30 m and to generate 3D coseismic strain tensors. We found that across-fault vertical offsets alternated between uplift and subsidence and varied between ~1-3 m in a non-systematic manner along the Hoshab fault. We show that the pre-existing topography and near-fault geomorphology are variably consistent and inconsistent with the displacement kinematics of the 2013 earthquake, and we argue that these relationships highlight varied slip sense history along the Hoshab fault. Notably, topography along the southern extents of the Hoshab fault requires different surface displacement kinematics than occurred in the 2013 earthquake, suggesting that the Hoshab fault accommodates varying senses of slip (bimodal slip) through time.

Baluchistan Province↗
USGS2018

Karachi tides during the 1945 Makran tsunami

This paper extends and detides a Karachi tide-gauge record as an observational basis for assessing Indian Ocean tsunami risk. The extended marigram encompasses the time of the great 1945 Makran earthquake of early November 28, local time, and of the ensuing tsunami, which continued into November 29. The marigram was published previously as a 9-h excerpt that begins 1 h after the earthquake. The full marigram presented here covers most of 17 days from November 15 to December 1. Gaps include a tsunami-induced outage that may help explain why the highest water level gauged is 1 m below the maximum water level reported nearby. The detiding method computes a reference tidal curve that disregards all observations from November 28 and 29. For those 2 days, the reference tide is guided by Admiralty tide tables and, secondarily, by high waters and low waters gauged before and after. As in previous estimates, the detided tsunami crests about 0.5 m above ambient tide, but now with the possibility that the gauge failed to record a higher wave. Anomalies described for the first time include an early one that likely resulted from a recognized problem with the Karachi tide station, but which might instead represent an earthquake precursor.

Karachi↗
USGS2018

A digital elevation model for simulating the 1945 Makran tsunami in Karachi Harbour

The digital elevation model documented here provides a tool for calibrating tsunami models to effects of the 1945 Makran tsunami that were observed in Karachi Harbour. The DEM bathymetry is derived from soundings made mainly during the first 8 years post-tsunami. While deficient in its portrayal of interior tidelands and upland topography, the DEM accurately represents the setting of a tide gauge that recorded the 1945 tsunami.

Karachi Harbour↗
USGS2015

Evidence for slip partitioning and bimodal slip behavior on a single fault: Surface slip characteristics of the 2013 Mw7.7 Balochistan, Pakistan earthquake

Deformation is commonly accommodated by strain partitioning on multiple, independent strike-slip and dip-slip faults in continental settings of oblique plate convergence. As a corollary, individual faults tend to exhibit one sense of slip – normal, reverse, or strike-slip – until whole-scale changes in boundary conditions reactivate preexisting faults in a new deformation regime. In this study, we show that a single continental fault may instead partition oblique strain by alternatively slipping in a strike-slip or a dip-slip sense during independent fault slip events. We use 0.5 m resolution optical imagery and sub-pixel correlation analysis of the 200+ km 200 + km "> 2013 M w 7.7 Balochistan, Pakistan earthquake to document co-seismic surface slip characteristics and Quaternary tectonic geomorphology along the causative Hoshab fault. We find that the 2013 earthquake, which involved a ∼6:1 strike-slip to dip-slip ratio, ruptured a structurally segmented fault. Quaternary geomorphic indicators of gross fault-zone morphology reveal both reverse-slip and strike-slip deformation in the rupture area of the 2013 earthquake that varies systematically along fault strike despite nearly pure strike-slip motion in 2013. Observations of along-strike variations in range front relief and geomorphic offsets suggest that the Hoshab fault accommodates a substantial reverse component of fault slip in the Quaternary, especially along the southern section of the 2013 rupture. We surmise that Quaternary bimodal slip along the Hoshab fault is promoted by a combination of the arcuate geometry of the Hoshab fault, the frictional weakness of the Makran accretionary prism, and time variable loading conditions from adjacent earthquakes and plate interactions.

Balochistan↗
USGS2015

Structural degradation of Thar lignite using MW1 fungal isolate: optimization studies

Biological degradation of low-rank coals, particularly degradation mediated by fungi, can play an important role in helping us to utilize neglected lignite resources for both fuel and non-fuel applications. Fungal degradation of low-rank coals has already been investigated for the extraction of soil-conditioning agents and the substrates, which could be subjected to subsequent processing for the generation of alternative fuel options, like methane. However, to achieve an efficient degradation process, the fungal isolates must originate from an appropriate coal environment and the degradation process must be optimized. With this in mind, a representative sample from the Thar coalfield (the largest lignite resource of Pakistan) was treated with a fungal strain, MW1, which was previously isolated from a drilled core coal sample. The treatment caused the liberation of organic fractions from the structural matrix of coal. Fungal degradation was optimized, and it showed significant release of organics, with 0.1% glucose concentration and 1% coal loading ratio after an incubation time of 7 days. Analytical investigations revealed the release of complex organic moieties, pertaining to polyaromatic hydrocarbons, and it also helped in predicting structural units present within structure of coal. Such isolates, with enhanced degradation capabilities, can definitely help in exploiting the chemical-feedstock-status of coal.

Thar coalfield↗
USGS2015

On- and off-fault deformation associated with the September 2013 Mw7.7 Balochistan earthquake: Implications for geologic slip rate measurements

The 24 September 2013 M w 7.7 Balochistan, Pakistan earthquake ruptured a ~ 200 km-long stretch of the Hoshab fault in southern Pakistan and produced the second-largest lateral surface displacement observed for a continental strike-slip earthquake. We remotely measured surface deformation associated with this event using high-resolution (0.5 m) pre- and post-event satellite optical imagery. We document left lateral, near-field, on-fault offsets (10 m from fault) using 309 laterally offset piercing points, such as streams, terrace risers, and roads. Peak near-field displacement is 13.6 + 2.5 / − 3.4 m. We characterize off-fault deformation by measuring medium- (< 350 m from fault) and far-field (> 350 m from fault) displacement using manual (259 measurements) and automated image cross-correlation methods, respectively. Off-fault peak lateral displacement values are ~ 15 m and exceed on-fault displacement magnitudes for ~ 85% of the rupture length. Our observations suggest that for this rupture, coseismic surface displacement typically increases with distance away from the surface trace of the fault; however, nearly 100% of total surface displacement occurs within a few hundred meters of the primary fault trace. Furthermore, off-fault displacement accounts for, on average, 28% of the total displacement but exhibits a highly heterogeneous along-strike pattern. The best agreement between near-field and far-field displacements generally corresponds to the narrowest fault zone widths. Our analysis demonstrates significant and heterogeneous mismatches between on- and off-fault coseismic deformation, and we conclude that this phenomenon should be considered in hazard models based on geologically determined on-fault slip rates.

Tectonophysics↗
USGS2014

Ball-and-socket tectonic rotation during the 2013 M w 7.7 Balochistan earthquake

The September 2013 M w 7.7 Balochistan earthquake ruptured a ∼200-km-long segment of the curved Hoshab fault in southern Pakistan with 10±0.2 m of peak sinistral and ∼1.7±0.8 m of dip slip. This rupture is unusual because the fault dips 60±15° towards the focus of a small circle centered in northwest Pakistan, and, despite a 30° increase in obliquity along strike, the ratios of strike and dip slip remain relatively uniform. Surface displacements and geodetic and teleseismic source inversions quantify a bilateral rupture that propagated rapidly at shallow depths from a transtensional jog near the northern end of the rupture. Static friction prior to rupture was unusually weak (μ<0.05), and friction may have approached zero during dynamic rupture. Here we show that the inward-dipping Hoshab fault defines the northern rim of a structural unit in southeast Makran that rotates – akin to a 2-D ball-and-socket joint – counter-clockwise in response to India's penetration into the Eurasian plate. This rotation accounts for complexity in the Chaman fault system and, in principle, reduces seismic potential near Karachi; nonetheless, these findings highlight deficiencies in strong ground motion equations and tectonic models that invoke Anderson–Byerlee faulting predictions.

Balochistan↗
USGS2013

Fungal degradation of coal as a pretreatment for methane production

Coal conversion technologies can help in taking advantage of huge low rank coal reserves by converting those into alternative fuels like methane. In this regard, fungal degradation of coal can serve as a pretreatment step in order to make coal a suitable substrate for biological beneficiation. A fungal isolate MW1, identified as Penicillium chrysogenum on the basis of fungal ITS sequences, was isolated from a core sample of coal, taken from a well drilled by the US. Geological Survey in Montana, USA. The low rank coal samples, from major coal fields of Pakistan, were treated with MW1 for 7 days in the presence of 0.1% ammonium sulfate as nitrogen source and 0.1% glucose as a supplemental carbon source. Liquid extracts were analyzed through Excitation&ndash;Emission Matrix Spectroscopy (EEMS) to obtain qualitative estimates of solubilized coal; these analyses indicated the release of complex organic functionalities. In addition, GC&ndash;MS analysis of these extracts confirmed the presence of single ring aromatics, polyaromatic hydrocarbons (PAHs), aromatic nitrogen compounds and aliphatics. Subsequently, the released organics were subjected to a bioassay for the generation of methane which conferred the potential application of fungal degradation as pretreatment. Additionally, fungal-mediated degradation was also prospected for extracting some other chemical entities like humic acids from brown coals with high huminite content especially from Thar, the largest lignite reserve of Pakistan.

Sindh Province↗
USGS2013

Epidote from the Zard Mountains, Kharan, Balochistan, Pakistan

The authors received two unusual crystals of epidote from Rock Currier, Jewel Tunnel Imports, in 2012. The mineral specimens were collected at Zard Mountain (Zard Koh), in the central part of the Ruskoh Mountains (Rusk Koh), west of Kharan, Balochistan, Pakistan (written communication, Rock Currier, 2013). The epidote locality was most likely discovered in 2010. These epidote crystals were unusual in both form and composition. The large crystals were flat tabular and pseudohexagonal in shape which is an uncommon crystal form for a monoclinic mineral (fig. 1). Other specimens from the same locality have been described as pseudo-octahedral in shape. The two crystals range in size from 5.5 to 6.5 centimeters (2.2 to 2.6 inches) and are slightly magnetic. The epidote crystals have a core matrix that resembles a weathered igneous rock. Some micro brown- to reddish-titanite crystals were observed under a binocular microscope on the surface and core areas of the crystals (figs. 2 and 3). Other minerals observed in the core areas include feldspar, biotite, and quartz. The crystals display evidence of cluster-growth with points of attachment to other crystals. The epidotes were most likely collected in pockets of a weathered igneous-skarn deposit.

Balochistan, Zard Mountains↗
USGS2011

Summary of the stratigraphy and structural elements related to plate convergence of the Quetta-Muslim Bagh-Sibi region, Balochistan, west-central Pakistan

Obduction of an ophiolite complex onto the northwestern continental margin of the India plate occurred during the Late Cretaceous to early Paleocene, followed by collision of the ophiolitic complex of the India plate with the Eurasia plate in the Eocene. Lower Eocene marine strata overlie the ophiolitic complex suggesting that suturing was completed by early Eocene time. The Quetta-Muslim Bagh-Sibi region is a structurally complex area within west-central Pakistan characterized by broad and tight folds, and reverse, thrust, and strike-slip faults. In order to understand this complex deformation, we have divided this region into five structural domains which are separated by four major boundary faults formed during four major periods of deformation related to oblique convergence of the India and Eurasia plates. The five structural domains are (1) a foredeep, (2) a foreland fold-and-thrust belt, (3) a major deep trough that formed within the foreland fold-and-thrust belt and filled with collision molasse, (4) a thick flysch deposit, and (5) a subduction-obduction and related igneous rock terrane on the margin of the Eurasia plate (Afghan block). The four major faults that bound the structural terrane are the Frontal (F), Ghazaband-Zhob (GZ), Gwal-Bagh (GB), and Chaman (C) faults. Four major periods of deformation are recognized: (1) emplacement of ophiolitic rocks onto the continental margin of the India plate; (2) convergence of the India-Eurasia plates; (3) deposition of Tertiary-Quaternary molasse units followed by major folding and thrusting, and formation of strike-slip faults; and (4) deposition of Pleistocene molasse units with subsequent folding, thrusting, and strike-slip motion that continues to the present.

Open-File Report↗
USGS2007

Hydrological applications of Landsat imagery used in the study of the 1973 Indus River flood, Pakistan

During August and September 1973, the Indus River Valley of Pakistan experienced one of the largest floods on record, resulting in damages to homes, businesses, public works, and crops amounting to millions of rupees. Tremendous areas of lowlands were inundated along the Indus River and major tributaries. Landsat data made it possible to easily measure the extent of flooding, totaling about 20,000 km 2 within an area of about 400,000 km 2 south from the Punjab to the Arabian Sea. The Indus River data were used to continue experimentation in the development of rapid, accurate, and inexpensive optical techniques of flood mapping by satellite begun in 1973 for the Mississipi River floods. The research work on the Indus River not resulted in the development of more effective procedures for optical processing of flood data and synoptically depicting flooding, but also provided potentially valuable ancillary information concerning the hydrology of much of the Indus River Basin.

Indus River Basin↗
USGS2006

Summary of preliminary 2D inundation modeling for three Hattian landslide dam breach scenarios

On October 8, 2005, a M 7.6 earthquake near Muzafarrabad, Pakistan, triggered a landslide that dammed the Karli River and one of its tributaries about 4 km upstream of the confluence of the Karli and Jhelum rivers near the town of Hattian Bala. The smaller dam on the tributary of the Karli River has been artificially breached and is no longer a hazard. When the larger dammed lake on the Karli River has filled enough to flow over the landslide blockage, it will have impounded about 60 million cubic meters of water. This lake will drain through the landslide dam as it breaches during the spring runoff or during the monsoon season in early summer. The inundation associated with the Karli River landslide dam breach endangers a substantial downstream population, particularly the population located in the vicinity of Hattian Bala at the confluence of the Karli and Jhelum rivers. To help mitigate this hazard, we used an accurate two-dimensional flow model to simulate dambreak flows associated with three breach-rate downcutting scenarios, and estimated inundation depths and peak flow velocities. We superimposed inundation extents and other attributes on photographic images of the region to provide clear delineation of potential impacts on populated areas near the confluence of the Karli and Jhelum rivers.

Open-File Report↗