Research about Onondaga Trough

USGS2008

Ground-water-flow modeling of a freshwater and brine-filled aquifer in the Onondaga Trough, Onondaga County, New York: A summary of findings

In 2007, the U.S. Geological Survey (USGS) completed a hydrogeologic study that included the development of a groundwater-flow model of the glacial-drift aquifer in the Onondaga Trough near Syracuse, N.Y., which extends from the Valley Heads Moraine near Tully, N.Y., to Onondaga Lake (fig. 1). Glacial sediments within the Onondaga Trough contain freshwater, saline water, and brine, which has historically supported several chemical industries in Syracuse. The ground-water-flow model was developed as a means to assist the members of the Onondaga Lake Partnership (local, State, and Federal governmental agencies) to assess remediation plans for Onondaga Lake and the Onondaga Creek watershed. Prior to this study, in the late 1990s, very little information was known about the physical nature of the valley-fill aquifer or the quality of water within it. Acquisition of this information would help local agencies understand the interactions of fresh and saline water within the aquifer and Onondaga Lake, and would facilitate the design of proposed and ongoing remediation work in and near the lake. The USGS study characterized the geology and geochemistry of the aquifer system, estimated the rate and direction of ground-water movement, and estimated mass loadings of chloride to Onondaga Lake and its tributaries from natural and anthropogenic sources. The study required analysis of existing hydrogeologic data and drilling of new test wells to collect additional hydrogeologic data to supplement this database. A three-dimensional geologic model of the unconsolidated deposits that fill the Onondaga Trough was developed from this information. Water-quality samples were collected, and hydraulic head (water-level) measurements were made in the test wells. The water samples were analyzed for a variety of chemical constituents to determine the composition and age of saline waters within the aquifer. The geologic model, together with the water-quality and hydraulic-head data, supported the development of several variable-density flow models of the aquifer system. The complete results of this study are summarized in Yager and others (2007a), which discusses the present location of the brine pool, potential sources of the brine, and the effects of the brine pool on ground-water flow near Onondaga Lake.

New York↗

USGS2007

Halite brine in the Onondaga Trough near Syracuse, New York: Characterization and simulation of variable-density flow

Halite brine (saturation ranging from 45 to 80 percent) lies within glacial-drift deposits that fill the Onondaga Trough, a 40-km long bedrock valley deepened by Pleistocene ice near Syracuse, N.Y. The most concentrated brine occupies the northern end of the trough, more than 15 kilometers (km) beyond the northern limit of halite beds in the Silurian Salina Group, the assumed source of salt. The chemical composition of the brine and its radiocarbon age estimated from geochemical modeling with NETPATH suggest that the brine formed through dissolution of halite by glacial melt water, and later mixed with saline bedrock water about 16,500 years ago. Transient variable-density flow simulations were conducted with SEAWAT to assess current (2005) ground-water flow conditions within the glacial drift. A transient three-dimensional (3D) model using a grid spacing of 100 meters (m) and maximum layer spacing of 30 m was used to simulate a 215-year period from 1790 to 2005. The model was calibrated to observations of water levels, chloride concentrations, and discharges of water and chloride. The model produced an acceptable match to the measured data and provided a reasonable representation of the density distribution within the brine pool. The simulated mass of chloride in storage declined steadily during the 215-year period; however, the decline was mainly due to dispersion, which is probably overestimated because of the large layer spacing. Model results suggest that saline water from waste-disposal operations associated with a chemical plant has migrated beneath the western shore of Onondaga Lake. Two-dimensional (2D) cross-sectional models of the aquifer system within the Onondaga Trough were prepared to test the plausibility of a hypothesis that the brine was derived from a relict source of halite that was dissolved by glacial melt water. The 2D models used parameter estimates obtained with the calibrated 3D model. Model results indicated the brine could have migrated from the bedded-halite subcrop area and remained in the glacial sediments at the northern end of trough for over 16,000 years, as suggested by radiocarbon dating. The 2D models also indicated that slow dissipation of brine occurs through a mixing zone formed by upward flow of freshwater over the southern end of the brine pool. The simulated depletion rate is controlled by the rate of mixing, which is limited by the specified grid resolution and the accuracy of the numerical method used to solve the advection-dispersion equation. A numerical solution obtained by using an implicit finite-difference method with upstream weighting and a 2D grid containing a column and layer spacing of 76 m and 3 m, respectively, provided an acceptable match to chloride concentration profiles measured at three locations within the Onondaga Trough.

New York↗