Geology Reports⌕ Search

Geology topics

Research about New York

Source-linked reports with geographic coverage including New York.

At least 199 records · Page 11Linked to original sources

Developing species-age cohorts from forest inventory and analysis data to parameterize a forest landscape model

Simulating long-term, landscape level changes in forest composition requires estimates of stand age to initialize succession models. Detailed stand ages are rarely available, and even general information on stand history often is lacking. We used data from USDA Forest Service Forest Inventory and Analysis (FIA) database to estimate broad age classes for a forested landscape to simulate changes in landscape composition and structure relative to climate change at Fort Drum, a 43,000 ha U.S. Army installation in northwestern New York. Using simple linear regression, we developed relationships between tree diameter and age for FIA site trees from the host and adjacent ecoregions and applied those relationships to forest stands at Fort Drum. We observed that approximately half of the variation in age was explained by diameter breast height (DBH) across all species studied ( r 2 = 0.42 for sugar maple Acer saccharum to 0.63 for white ash Fraxinus americana ). We then used age-diameter relationships from published research on northern hardwood species to calibrate results from the FIA-based analysis. With predicted stand age, we used tree species life histories and environmental conditions represented by ecological site types to parameterize a stochastic forest landscape model (LANDIS-II) to spatially and temporally model successional changes in forest communities at Fort Drum. Forest stands modeled over 100 years without significant disturbance appeared to reflect expected patterns of increasing dominance by shade-tolerant mesophytic tree species such as sugar maple, red maple ( Acer rubrum ), and eastern hemlock ( Tsuga canadensis ) where soil moisture was sufficient. On drier sandy soils, eastern white pine ( Pinus strobus ), red pine ( P. resinosa ), northern red oak ( Quercus rubra ), and white oak ( Q. alba ) continued to be important components throughout the modeling period with no net loss at the landscape scale. Our results suggest that despite abundant precipitation and relatively low evapotranspiration rates for the region, low soil water holding capacity and fertility may be limiting factors for the spread of mesophytic species on excessively drained soils in the region. Increasing atmospheric temperatures projected for the region could alter moisture regimes for many coarse-textured soils providing a possible mechanism for expansion of xerophytic tree species.

New York↗

Integrated geophysical imaging of rare-earth-element-bearing iron oxide-apatite deposits in the eastern Adirondack Highlands, New York

The eastern Adirondack Highlands of northern New York host dozens of iron oxide-apatite (IOA) deposits containing magnetite and rare earth element (REE)-bearing apatite. We use new aeromagnetic, aeroradiometric, ground gravity, and sample petrophysical and geochemical data to image and understand these deposits and their geologic framework. Aeromagnetic total field data reflect highly magnetic leucogranite host rock and major structures that likely served as fluid conduits for the hydrothermal system. Bandpass filtering of the aeromagnetic data reveals individual deposits that were verified in the field or from historical records. A three-dimensional inversion for magnetic susceptibility images these deposits at depth, allowing inference of plunge directions and relative size. Radiometric data highlight variations in the surface geology and several large tailings piles that contain REE-bearing apatite. Within the host rock, eTh (equivalent Th), K and the eTh/K ratio are variable with high eTh/K near several of the IOA deposits. Areas with elevated K or low eTh/K representing potassic alteration appear to be rare; instead elevated eTh/K ratios likely reflect widespread sodic alteration overprinting potassic alteration. Bouguer gravity anomalies show limited correspondence to the surface geology, radiometric data, or magnetic data, but do exhibit ~10-km wide highs in areas where deposits are observed. Two-dimensional forward models of the gravity and magnetic data show that deeper dense material beneath the leucogranite is quantitatively feasible. If these dense rocks represent intrusions that were emplaced or still cooling at the time of mineralization, they may have served as a heat source that helped to drive the hydrothermal system. Combining datasets, we find that deposits occur towards the distal ends of major structures within the host leucogranite and mostly above gravity highs. The geophysical modeling thus suggests that IOA deposits formed in structural, thermal, and chemical traps near the distal ends of the hydrothermal system.

New York↗

Delineation of the freshwater-saltwater interface on southwestern Long Island, New York, through use of surface and borehole geophysical methods

The U.S. Geological Survey used surface and borehole geophysical methods to delineate the freshwater-saltwater interface in coastal plain aquifers along the southwestern part of Long Island, New York. Over pumping of groundwater in the early 20th century combined with freshwater-saltwater interfaces at the coastline created saltwater intrusion in the upper glacial, Jameco, Magothy, and Lloyd aquifers. Our research indicates extensive saltwater intrusion of the Lloyd aquifer along the southwestern coast of Long Island, N.Y. Several public-supply wells in the southern parts of Nassau, Queens, and Kings Counties have been adversely affected by saltwater intrusion causing several supply wells to be shut down and abandoned. In 2015–17, the U.S. Geological Survey collected time domain electromagnetic soundings at 12 locations and borehole electromagnetic induction conductivity logs at 9 outpost wells within the study area to delineate several saltwater intrusion wedges. Three separate wedges , (shallow, intermediate, and deep), of saltwater intrusion were delineated in the upper glacial, Jameco, and Magothy aquifer complex. In addition, reanalysis of geophysical logs collected in an open borehole of a test well in southern Queens County in 1989 revealed the Lloyd aquifer was nearly completely intruded by saltwater with an estimated chloride concentration of 15,000 milligrams per liter. This suggests the freshwater-saltwater interface was at the coastline and not miles offshore as theorized by previous studies.

New York↗

Learning augmented methods for matching: Improving invasive species management and urban mobility

With the success of machine learning, integrating learned models into real-world systems has become a critical chal- lenge. Naively applying predictions to combinatorial opti- mization problems can incur high costs, which has motivated researchers to consider learning augmented algorithms that can make use of faulty or incomplete predictions. Inspired by two matching problems in computational sustainability where data are abundant, we consider the learning augmented min weight matching problem where some nodes are revealed online while others are known a priori, e.g., by being pre- dicted by machine learning. We develop an algorithm that is able to make use of this extra information and provably im- proves upon pessimistic online algorithms. We evaluate our algorithm on two settings from computational sustainability – the coordination of opportunistic citizen scientists for inva- sive species management and the matching between taxis and riders under uncertain trip duration predictions. In both cases, we perform extensive experiments on real-world datasets and find that our method outperforms baselines, showing how learning augmented algorithms can reliably improve solu- tions for problems in computational sustainability

New York↗

Evaluating hydrophones for detecting underwater-calling frogs

Amphibians are declining and disappearing worldwide at an alarming rate, emphasizing the need for accurate surveys to document the distribution and abundance of this imperiled taxon. Automated recorders are a powerful tool for surveyors to continuously monitor for calling amphibians. However, we are discovering that many species of frog call when submerged underwater making it challenging if not impossible for terrestrial observers to use microphones to detect them. Here, we conducted two field experiments to assess the efficacy of hydrophones for detecting underwater frog calls. The first was designed to directly compare detection probability of underwear frog calls by hydrophones, microphones, and human observers. The second was to evaluate the wetland characteristics that most influenced the detection distance of hydrophones. We found that hydrophones were 30 times more likely to detect underwater calls relative to microphones and 8.5 times more likely relative to human observers. Hydrophones detected underwater frog calls emitted 65 m away and performed best when water was deep (> 50 cm) and there were few submerged obstacles (i.e. logs) present. Hydrophones may be an important tool for herpetologists to survey for a suite of frog species known to vocalize underwater and as more practitioners use hydrophones the list of underwater-calling frogs is certain to grow.

New York↗

Methods of liming to accelerate the reversal of acidic deposition effects in calcium-depleted Adirondack watersheds

Acidic deposition levels in the Adirondack region of New York State at the close of 2020 declined to values estimated for the early 20th century before the emergence of large-scale industrialization. However, chemical recovery of surface waters has lagged as a result of soil calcium (Ca) depletion, and long-term monitoring has not provided a clear indication that soil Ca availability has begun to increase. Recent computer modeling of Adirondack streams suggests that recovery goals may not be met in Ca-depleted watersheds for decades even with aggressive reductions in acidic deposition. The delayed response of soils and surface waters to reduced deposition has prompted consideration of adding Ca in the form of lime to increase the rate at which the effects of acidic deposition are being reversed through decreased pollutant emissions alone. In this regard, an experiment was conducted from 2013–2019 to evaluate the utility of liming to accelerate recovery in Adirondack stream watersheds that drain directly into Honnedaga Lake, near Forestport, NY. Results of this research were combined with relevant research results from prior liming studies to develop a methodology for the use of liming to accelerate reversal of acidic deposition effects tailored for the Adirondack region of New York State. This document presents (1) a rationale for liming in the context of the current acidic deposition regime, (2) an assessment of benefits and risks to be considered with various application methods, (3) a suggested method for selecting watersheds where liming would be most beneficial, and (4) an explanation of the primary factors that need to be addressed to successfully implement watershed liming.

New York↗

Simulation of groundwater flow in the regional aquifer system on Long Island, New York, for pumping and recharge conditions in 2005–15

A three-dimensional groundwater-flow model was developed for the aquifer system of Long Island, New York, to evaluate (1) responses of the hydrologic system to changes in natural and anthropogenic hydraulic stresses, (2) the subsurface distribution of groundwater age, and (3) the regional-scale distribution of groundwater travel times and the source of water to fresh surface waters and coastal receiving waters. The model also provides the groundwater flow components used to define model boundaries for possible inset models used for local-scale analyses. The three-dimensional, groundwater flow model developed for this investigation uses the numerical code MODFLOW–NWT to represent steady-state conditions for average groundwater pumping and aquifer recharge for 2005–15. The particle-tracking algorithm MODPATH, which simulates advective transport in the aquifer, was used to estimate groundwater age, delineate the areas at the water table that contribute recharge to coastal and freshwater bodies, and estimate total travel times of water from the water table to discharge locations. A three-dimensional, 1-meter (3.3-foot) topobathymetric model was used to determine land-surface altitudes for the island and seabed altitudes for the surrounding coastal waters. The mapped extents and surface altitudes of major geologic units were compiled and used to develop a three-dimensional hydrogeologic framework of the aquifer system, including aquifers and confining units. Lithologic data from deep boreholes and previous aquifer-test results were used to estimate the three-dimensional distribution of hydraulic conductivity in principal aquifers. Natural recharge from precipitation was estimated for 2005–15 using a modified Thornthwaite-Mather methodology as implemented in a soil-water balance model. Components of anthropogenic recharge—wastewater return flow, storm water inflow, and inflow from leaky infrastructure—also were estimated for 2005–15. Groundwater withdrawals for various sources, including public water supply, industrial, remediation, and agricultural, were compiled or estimated for the same period. These data were incorporated into the model development to represent the aquifer system geometry, boundaries, and initial hydraulic properties of the regional aquifers and confining units within the Long Island aquifer system. Average hydraulic conditions—water levels and streamflows—for 2005–15 were estimated using existing data from the U.S. Geological Survey National Water Information System database. Model inputs were adjusted to best match average hydrologic conditions using inverse methods as implemented in the parameter-estimating software PEST. The calibrated model was used to simulate average hydrologic conditions in the aquifer system for 2005–15. About 656 cubic feet per second of water was withdrawn on average annually for 2005–15 for water supply and an average of about 349 cubic feet per second of water recharged the aquifer annually from return flow and leaky infrastructure. Parts of New York City have drawdowns exceeding 25 feet, mostly because of urbanization and associated large decreases in recharge rates. Large areas in the western part of the island have drawdowns exceeding 10 feet, mostly from large groundwater withdrawals and sewering, which largely eliminates wastewater return flow. Water-table altitudes in eastern parts of the island increased by more than 2 feet in some areas as a result of wastewater return flow in unsewered areas and changes in land use. Changes in streamflows show a similar pattern as water-table altitudes. Streamflows generally decrease in western parts of the island where there are large drawdowns and increase in eastern parts of the island where water-table altitudes increase.

New York↗

Dynamics of marsh-derived sediments in lagoon-type estuaries

Salt marshes are valuable ecosystems that must trap sediments and accrete in order to counteract the deleterious effect of sea‐level rise. Previous studies have shown that the capacity of marshes to build up vertically depends on both autogenous and exogenous processes including eco‐geomorphic feedbacks and sediment supply from in‐land and coastal ocean. There have been numerous efforts to quantify the role played by the sediments coming from marsh edge erosion on the resistance of salt marshes to sea‐level rise. However, the majority of existing studies investigating the interplay between lateral and vertical dynamics use simplified modelling approaches and they do not consider that marsh retreat can affect the regional scale hydrodynamics and sediment retention in back‐barrier basins. In this study, we evaluated the fate of the sediments originating from marsh lateral loss by using high‐resolution numerical model simulations of Jamaica Bay, a small lagoonal estuary located in New York City. Our findings show that up to 42% of the sediments released during marsh edge erosion deposits on the shallow areas of the basin and over the vegetated marsh platforms, contributing positively to the sediment budget of the remaining salt marshes. Furthermore, we demonstrate that with the present‐day sediment supply from the ocean the system cannot keep pace with sea‐level rise even accounting for the sediment liberated in the bay through marsh degradation. Our study highlights the relevance of multiple sediment sources for the maintenance of the marsh complex.

New York↗

Analysis of remedial scenarios affecting plume movement through a sole-source aquifer system, southeastern Nassau County, New York

A steady-state three-dimensional groundwater-flow model based on present conditions is coupled with the particle-tracking program MODPATH to assess the fate and transport of volatile organic-compound plumes within the Magothy and upper glacial aquifers in southeastern Nassau County, New York. Particles are forward tracked from locations within plumes defined by surfaces of equal concentration. Particles move toward ultimate well capture and discharge to the general head and drain boundaries representing natural receptors in the models. Because rates of advection within coarse-grained sediments typically exceed 0.1 foot per day, mechanisms of dispersion and diffusion were assumed to be negligible. Resulting particle pathlines are influenced by hydrogeologic framework features and the interplay of nearby hydrologic stresses. Simulated hydrologic effects include cones of depression near pumping wells and water-table mounding near points of treated water recharge; however, remedial pumping amounts are balanced by treated-water return, and net effects at distant regional boundaries, including freshwater/saltwater interfaces, are minor. Once a steady-state model was developed and calibrated, eight hypothetical remedial scenarios were evaluated to hydraulically contain the volatile organic-compound plumes. Specifically, the remedial scenarios were optimized to achieve full containment by altering the pumping-well locations, adjusting the pumping rates, and adjusting the discharge locations and rates. Based on the results, total hypothetical extraction rates varied from about 5,462 gallons per minute during an anticipated near-future condition to about 13,340 gallons per minute during full hydraulic containment of all site-related compounds identified by the New York State standards, criteria, and guidance for environmental investigations and cleanup. Targeting of high-concentration zones of the plume increases the total amount of remedial pumpage necessary to capture all parts of the plume but may decrease the total amount of time necessary to operate a remedial system. Simulated time frames of advective transport ranged from about 12 years to capture zones with elevated concentrations of volatile organic compounds (mean particle travel time plus the standard deviation of travel time) to more than 100 years to capture all zones. Groundwater-flow model analysis indicates that all the optimal plume-containment scenarios would have negligible effects on streams and the saltwater-freshwater interface along the south shore of Long Island. Massapequa, Bellmore, Seaman, and Seaford Creeks are represented by using MODFLOW drain-boundary conditions. Saltwater-freshwater interfaces are represented by using MODFLOW general head-boundary conditions where the Magothy aquifer discharges upward into saline groundwater across the Gardiners clay confining unit and the Lloyd aquifer discharges upward into saline groundwater across the Raritan confining unit.

New York↗

A synthesis of patterns of environmental mercury inputs, exposure and effects in New York State

Mercury (Hg) pollution is an environmental problem that adversely affects human and ecosystem health at local, regional, and global scales—including within New York State. More than two-thirds of the Hg currently released to the environment originates, either directly or indirectly, from human activities. Since the early 1800s, global atmospheric Hg concentrations have increased by three- to eight-fold over natural levels. In the U.S., atmospheric emissions and point-source releases to waterways increased following industrialization into the mid-1980s. Since then, water discharges have largely been curtailed. As a result, Hg emissions, atmospheric concentrations, and deposition over the past few decades have declined across the eastern U.S. Despite these decreases, Hg pollution persists. To inform policy efforts and to advance public understanding, the New York State Energy Research and Development Authority (NYSERDA) sponsored a scientific synthesis of information on Hg in New York State. This effort includes 23 papers focused on Hg in atmospheric deposition, water, fish, and wildlife published in Ecotoxicology . New York State experiences Hg contamination largely due to atmospheric deposition. Some landscapes are inherently sensitive to Hg inputs driven by the transport of inorganic Hg to zones of methylation, the conversion of inorganic Hg to methylmercury, and the bioaccumulation and biomagnification along food webs. Mercury concentrations exceed human and ecological risk thresholds in many areas of New York State, particularly the Adirondacks, Catskills, and parts of Long Island. Mercury concentrations in some biota have declined in the Eastern Great Lakes Lowlands and the Northeastern Highlands over the last four decades, concurrent with decreases in water releases and air emissions from regional and U.S. sources. However, widespread changes have not occurred in other ecoregions of New York State. While the timing and magnitude of the response of Hg levels in biota varies, policies expected to further diminish Hg emissions should continue to decrease Hg concentrations in food webs, yielding benefits to the fish, wildlife, and people of New York State. Anticipated improvements in the Hg status of aquatic ecosystems are likely to be greatest for inland surface waters and should be roughly proportional to declines in atmospheric Hg deposition. Efforts that advance recovery from Hg pollution in recent years have yielded significant progress, but Hg remains a pollutant of concern. Indeed, due to this extensive compilation of Hg observations in biota, it appears that the extent and intensity of the contamination on the New York landscape and waterscape is greater than previously recognized. Understanding the extent of Hg contamination and recovery following decreases in atmospheric Hg deposition will require further study, underscoring the need to continue existing monitoring efforts.

New York↗

Aquifer transmissivity in Nassau, Queens, and Kings Counties, New York, estimated from specific-capacity tests at production wells

As part of a cooperative effort between the U.S. Geological Survey and the New York State Department of Environmental Conservation to evaluate the sustainability of Long Island’s sole-source aquifer system, the transmissivities of four aquifers were estimated from specific-capacity tests at 447 production wells in Nassau, Queens, and Kings Counties on Long Island, New York. The specific-capacity test data, which included pumping rate, pumping duration, and drawdown, were obtained from published and unpublished records of driller-reported acceptance tests collected at production wells screened in the upper glacial, Jameco, Magothy, or Lloyd aquifers. Pumping rates from the production wells during the tests generally were greater than 400 gallons per minute and ranged up to 1,800 gallons per minute. Pumping duration generally was 8 hours or more. Transmissivities were estimated from the specific-capacity data by the Cooper-Jacob approximation of the Theis equation. The transmissivity estimates are considered rough approximations because the aquifers do not meet the ideal assumptions of the method, well losses and partial penetration were not accounted for, and aquifer storage coefficients were not known but were only estimated from available data. The transmissivities estimated from production wells screened in the upper glacial aquifer in the outwash plain south of the moraine generally were greater than those of the aquifer north of the moraine. The transmissivities estimated from the wells screened in the upper glacial aquifer south of the moraine typically ranged (as defined by the 10th and 90th percentiles) from 3,800 to 15,000 feet squared per day (ft 2 /d), with a median value of 7,300 ft 2 /d. The transmissivities estimated from the wells screened in the upper glacial aquifer north of the moraine typically ranged from 2,100 to 7,400 ft 2 /d, with a median value of 4,400 ft 2 /d. The Jameco aquifer generally had the highest estimated transmissivities of all the aquifers analyzed. The estimated transmissivities for the Jameco aquifer typically ranged from 5,500 to 43,000 ft 2 /d, with a median value of 16,000 ft 2 /d. The Magothy and Lloyd aquifers had similar estimated transmissivities. The transmissivities estimated for the Magothy aquifer typically ranged from 2,700 to 13,000 ft 2 /d, with a median of 7,100 ft 2 /d. The estimated transmissivities of the Lloyd typically ranged from 3,000 to 14,000 ft 2 /d, with a median of 7,200 ft 2 /d.

New York↗

Expanding the feasibility of fish and wildlife assessments with close-kin mark–recapture

Close-kin mark–recapture (CKMR) is a powerful new method for the assessment of fish and wildlife population dynamics. Unlike traditional mark–recapture techniques, the use of kinship as an identifying mark is robust to many forms of capture heterogeneity including variation in gear efficiency and tagging-based effects such as loss and differential mortality. In addition, close-kin methods can be applied to a wider range of sampling designs than traditional methods (e.g., single-occasion surveys and lethal capture), can provide retrospective historical abundance estimates, and can produce survival estimates from as few as two sampling occasions. We evaluated the ability of CKMR to provide estimates of abundance and adult survival and then compared results to those from traditional mark–recapture. This analysis incorporated data from a three-year study of lake resident brook trout ( Salvelinus fontinalis ) where individuals were both physically (PIT) tagged and genotyped for 44 de novo developed microsatellites with high throughput sequencing. Traditional mark–recapture estimates were derived using Pollock’s Robust Design, relying upon three primary open sampling occasions and four secondary closed occasions. We found that close-kin methods produced contemporary estimates of adult abundance and survival that were similar to those produced by traditional mark–recapture in both magnitude and precision. Furthermore, CKMR provided abundance estimates for multiple years prior to sampling and, when restricted to data from a single year, still produced reliable abundance estimates for at least one and as many as three years. Retrospective abundance estimates corresponded with those from a separate historical two-sample mark–recapture dataset. This study provides support for the use of CKMR as a robust and sampling-efficient alternative to traditional mark–recapture methods of assessing population parameters.

New York↗

Transmissivity estimated from brief aquifer tests of domestic wells and compared with bedrock lithofacies and position on hillsides in the Appalachian Plateau of New York

Procedures for undertaking and analyzing recovery from aquifer tests of 13 to 132 seconds (described in reports cited herein) were applied to 51 domestic drilled wells that penetrated bedrock outside major valleys in the part of the Appalachian Plateau of New York drained by the Susquehanna River. Transmissivities calculated from these tests ranged over three orders of magnitude in both the Catskill-Cattaraugus lithofacies (shales, mudstones, siltstones, medium to coarse sandstones, pebbly sandstones) and the Chemung-Hamilton lithofacies (shales, mudstones, siltstones, fine to medium sandstones). Median transmissivity values were 0.000425 foot squared per second (36.7 feet squared per day) in the Catskill-Cattaraugus lithofacies and 0.00055 foot squared per second (47.5 feet squared per day) in the Chemung-Hamilton lithofacies. The distributions of transmissivity values within the two lithofacies were likewise similar. The range and median values of transmissivity were also nearly the same on lower and midlevel hillsides and were only slightly greater on a few upper hillsides. Transmissivities estimated from such easily arranged and analyzed tests may be appropriate for estimating groundwater flux under the small gradients that prevail under natural conditions, but not under larger drawdowns and steeper gradients near clusters of domestic wells. Four of the 51 wells tested were also pumped for 10 to 32 minutes; analysis by the Theis recovery method yielded transmissivities consistent with the brief tests for 2 wells, but 7 to 9 times smaller for 2 wells. Transmissivity values estimated by the PICKINGmodel were not significantly different from values estimated by an automated application of the Picking method (PPC-Recovery) at a probability of 95 percent. Transmissivities calculated by either method from data for time intervals of 120 seconds or less may be of limited practical value because they apply only to a small volume of bedrock close to the pumped well.

New York↗

Distribution of selected hydrogeologic characteristics of the upper glacial and Magothy aquifers, Long Island, New York

The Pleistocene- and Cretaceous-age sediments underlying Long Island, New York, compose an important sole-source aquifer system that is nearly 2,000 feet thick in some areas. Sediment characteristics of importance for water supply include water-transmitting properties—horizontal and vertical hydraulic conductivity—and the distribution of lignite, which provides an important control on oxygen-reduction (redox) conditions and water quality, in Cretaceous-age aquifers. Several decades of urbanization and the associated need to meet water demand have generated abundant data on the lithology of the aquifer sediments and the potential for an improved regional-scale understanding of this aquifer system. There is a range in the source and quality of the information, but large amounts of data, even of lesser quality, can yield insight into important aquifer characteristics. The distribution of the horizontal and vertical hydraulic conductivity and the probability of occurrence of lignite and clay in the aquifer were developed for this study from a database of drilling records and geophysical logs. Lithologic descriptions were categorized into a set of standardized codes, which in turn, were aggregated into a set of general codes for the Pleistocene-age upper glacial and Cretaceous-age Magothy aquifers. General values of hydraulic conductivity were assigned to each code from published estimates on Long Island and analogous hydrogeologic environments on Cape Cod, Massachusetts. A binary value of 1 or 0 was assigned to each coded interval to indicate the presence or absence of lignite or based on keywords in the lithologic descriptions. This information was assembled into a geographic information system database that was queried sequentially and used to develop gridded values of each aquifer characteristic by use of ordinary kriging for a set of grids, each representing 10-foot-thick planar slices for the entire vertical thickness of each aquifer. These sets of grids, taken as a whole, represent a quasi-three-dimensional representation of each aquifer characteristic in both the upper glacial and Magothy aquifers. The analysis of hydraulic conductivity shows patterns that generally reflect known depositional features of each unit and are consistent with the current understanding of the geology of the aquifers. Spatial patterns in the upper glacial aquifer show contrasts in estimated hydraulic conductivity: lower values occur in inland areas and likely are associated with glacial moraines; higher values generally occur to the south in association with glacial outwash. Higher values of hydraulic conductivity in the Magothy aquifer, which resulted from deltaic deposition, generally occur in the basal parts of the unit, are associated with channel-lag deposits and are found in parts of the aquifer known for large well yields. Lower values of hydraulic conductivity generally occur in middle parts of the aquifer associated with deposition in overbank and wetland environments. The probability of lignite occurrence is highest in this same vertical zone of the Magothy aquifer, consistent with deposition in wetland environments. The probability of lignite occurrence generally is highest along the southern shore of the island. Lignite occurrence generally is consistent with water-quality patterns; water quality in these same areas indicate chemically reducing conditions and redox-related iron biofouling commonly occurs.

New York↗

Use of time domain electromagnetic soundings and borehole electromagnetic induction logs to delineate the freshwater/saltwater interface on southwestern Long Island, New York, 2015–17

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, used surface and borehole geophysical methods to delineate the freshwater/saltwater interface in coastal plain aquifers along the southwestern part of Long Island, New York. Over pumping of groundwater in the early 20th century combined with freshwater/saltwater interfaces at the coastline created saltwater intrusion in the upper glacial, Jameco, Magothy, and Lloyd aquifers. This study documents, for the first time, extensive saltwater intrusion of the Lloyd aquifer along the southwestern coast of Long Island, N.Y. Several public-supply wells in the southern parts of Nassau, Queens, and Kings Counties have been adversely affected by saltwater intrusion causing supply wells to be shutdown and abandoned. Due to the ongoing groundwater pumping in southern Nassau County, the freshwater/saltwater interface requires delineation and monitoring for any inland movement. In 2015–17, the U.S. Geological Survey collected time domain electromagnetic soundings at 12 locations and borehole electromagnetic induction conductivity logs at 9 wells within the study area to delineate several saltwater intrusion wedges. The upper glacial, Jameco, and Magothy aquifers were grouped into one aquifer complex within the study area to simplify interpretations. The coastal plain sediments increase in thickness from west to east and north to south because of their regional dip toward the southeast. Three separate wedges, shallow, intermediate, and deep, of saltwater intrusion were delineated in the upper glacial, Jameco, and Magothy aquifer complex. In addition, analysis of geophysical logs collected in an open borehole of a test well in southern Queens County in 1989 revealed the Lloyd aquifer was nearly completely intruded by saltwater with an estimated chloride concentration of 15,000 milligrams per liter. The geophysical logs from this well provides, for the first time, definitive proof of saltwater intrusion of the Lloyd aquifer on Long Island’s south shore, suggesting the freshwater/saltwater interface was at the coastline and not miles offshore as theorized by previous studies.

New York↗

Assessment of water quality and fecal contamination sources at Hook Pond, East Hampton, New York

Summary The U.S. Geological Survey, in cooperation with the Village of East Hampton, New York, conducted a 1-year study from August 2017 to August 2018 to provide data necessary to improve understanding of the sources of nutrients and pathogens to Hook Pond watershed to allow for possible mitigation or reduction of loads. Chronic eutrophication and recent concern over harmful cyanobacteria in Hook Pond are the result of past and present land uses and a changing climate that have prompted the Village of East Hampton and local businesses to study and remediate factors contributing to the persistent loading of nutrients, organic contaminants, and pathogens. This assessment of Hook Pond, Hook Pond Dreen, and shallow groundwater provides the most comprehensive set of water-quality data to date. Interpretations presented in this study and the data on which they are based can be used to support management decisions, inform and contribute to modeling, and serve as a baseline for future assessments. Results from continuous monitoring of water temperature, specific conductance, and elevation at Hook Pond site 10 (Maidstone Club golf cart bridge), as well as ancillary weather and tidal data from nearby stations, were used to help explain seasonal and storm-related concentration variation of nitrogen, phosphorus, wastewater-indicator compounds, and pathogens. Data collected were also compared to existing historical data. Physicochemical constituents measured on a routine basis throughout the pond and along the tributary showed the spatial variability in water temperature, specific conductance, dissolved oxygen, pH, turbidity, and chlorophyll a and phycocyanin fluorescence. A lakebed survey was compiled based on the year-round sampling throughout the pond for future comparisons. Water-quality data from shallow groundwater at points around Hook Pond and adjacent to Hook Pond Dreen were interpreted and quantified to estimate relative contributions and species of nutrients, wastewater-indicator compounds, and microbial source tracking (MST) markers to base flow. To supplement the continuous water-surface elevation data, a single set of discharge measurements was collected under normal (nonstorm) conditions to better understand the relative contributions and dilution of surface waters by contaminated groundwater. The nutrient and physicochemical data from this study can be used in conjunction with current and future models and decision support tools to guide planned and ongoing restoration efforts, such as dredging to reduce sediment accumulation, opening a pathway to the ocean (which would change the salinity and flow dynamics of the pond and adjacent groundwater), and addressing growing concerns over cyanobacterial blooms, while serving as a baseline for measuring changes resulting from sea-level rise, climate change, and changes in nutrient loading. The microbial source tracking and indicator bacteria results can help direct efforts to reduce runoff and direct contributions of fecal contamination from dogs and waterfowl along Hook Pond Dreen. The results can also be used to assess the current state of wastewater infrastructure surrounding and contributing to Hook Pond Dreen, based on detection of human markers throughout the year and with both Bacteroides and coliphage methods.

New York↗

Sediment budget estimates for a highly impacted embayment with extensive wetland loss

External sediment supply is an important control on wetland morphology and vulnerability to storms, sea-level rise, and land use change. Constraining sediment supply and net budgets is difficult due to multiple timescales of variability in hydrodynamic forcing and suspended-sediment concentrations, as well as the fundamental limitations of measurement and modeling technologies. We used two independent observational campaigns and one hydrodynamic modeling effort to estimate the sediment supply to Jamaica Bay, New York, USA, an urbanized embayment with a history of extensive wetland loss. We found that all three estimates indicate a net import to the system, ranging from 36 x 106 – 74 x 106 kg/y, with a mean estimate of 55,000 t/y +/- 31,000 t/y, which compares well with a prior estimate derived from radionuclide tracers. Net sediment import is controlled by flood-ebb asymmetry in bed shear stress, which results in higher suspended sediment concentrations on flood tide relative to ebb. This indicates a seaward source of sediment, likely offshore marine deposits and potentially sediment from the adjacent Hudson River-Estuary that is resuspended by waves in the coastal ocean. Despite the net sediment import, a simple sediment budget suggests that the rate of supply is not sufficient to maintain the present geomorphic planform of the system relative to sea-level rise. The convergent estimates from independent methods provide reasonable guidance as context for sediment-based restoration efforts.

New York↗