Geology ReportsSearch

Geology topics

Research about Leadville, Silverton, Colorado

Source-linked reports with geographic coverage including Leadville, Silverton, Colorado.

2 recordsLinked to original sources

Laboratory measurements of electrical properties of composite mine dump samples from Colorado and New Mexico

Individual mine waste samples were collected and combined to form one composite sample at each of eight mine dump sites in Colorado and New Mexico. The samples were air-dried and sieved to determine the geochemical composition of their <2mm size fraction. Splits of the samples were then rehydrated and their electrical properties were measured in the US Geological Survey Petrophysical Laboratory, Denver, Colorado (PetLab). The PetLab measurements were done twice: in 1999, using convenient amounts of rehydration water ranging from 5% to 8%; and in 2000, using carefully controlled rehydrations to 5% and 10% water. This report gives geochemical analyses of the <2mm size fraction of the composite samples (Appendix A), PetLab graphs of the 1999 measurements (Appendix B), Petlab graphs of the 2000 measurements (Appendix C), and Cole-Cole models of the PetLab data from the 2000 measurements (Appendix D).

Colorado

EPA method 1312 (synthetic precipitation leaching procedure); leachate chemistry data for solid mine waste composite samples from Silverton and Leadville, Colorado

The EPA Method 1312 Synthetic Precipitation Leaching Procedure (SPLP) leachate chemistry data for mine waste samples is presented. Four mine waste composite samples were collected from Silverton (YUK and MAY) and Leadville (SUN and VEN), Colorado and were extracted following the EPA Method 1312 procedure. Leachate pH values ranged from 2.68 to 3.37 and the samples were ranked by increasing pH: VEN < SUN < YUK < MAY. Specific conductivity values ranged from 203 µS to 1080 µS and the samples were ranked by increasing specific conductivity: MAY < YUK < SUN < VEN. For selected metal concentrations, no consistent pattern presented itself. MAY is the sample that typically has the lowest metal concentrations with the exception of nickel, zinc, and lead. The samples had SPLP leachate concentrations below the EPA Method 1311 Toxicity Characteristic Leaching Procedure (TCLP) regulatory levels.

Colorado