Geology Reports⌕ Search

Geology topics

Research about Kilauea volcano

Source-linked reports with geographic coverage including Kilauea volcano.

29 records · Page 2Linked to original sources
USGS2005

Source process of a long-period event at Kilauea volcano, Hawaii

We analyse a long-period (LP) event observed by a dense seismic network temporarily operated at Kilauea volcano, Hawaii, in 1996. We systematically perform spectral analyses, waveform inversions and forward modeling of the LP event to quantify its source process. Spectral analyses identify two dominant spectral frequencies at 0.6 and 1.3 Hz with associated Q values in the range 10-20. Results from waveform inversions assuming six moment-tensor and three single-force components point to the resonance of a horizontal crack located at a depth of approximately 150 m near the northeastern rim of the Halemaumau pit crater. Waveform simulations based on a fluid-filled crack model suggest that the observed frequencies and Q values can be explained by a crack filled with a hydrothermal fluid in the form of either bubbly water or steam. The shallow hydrothermal crack located directly above the magma conduit may have been heated by volcanic gases leaking from the conduit. The enhanced flux of heat raised the overall pressure of the hydrothermal fluid in the crack and induced a rapid discharge of fluid from the crack, which triggered the acoustic vibrations of the resonator generating the LP waveform. The present study provides further support to the idea that LP events originate in the resonance of a crack. 2005 RAS.

Hawaii↗
USGS2004

The emplacement of pahoehoe toes: Field observations and comparison to laboratory simulations

We observed active pahoehoe lobes erupted on Kilauea during May-June 1996, and found a range of emplacement styles associated with variations in local effusion rate, flow velocity, and strain rate. These emplacement styles were documented and quantified for comparison with earlier laboratory experiments. At the lowest effusion rates, velocities, and strain rates, smooth-surfaced lobes were emplaced via swelling, where new crust formed along an incandescent lip at the front of the lobe and the rest of the lobe was covered with a dark crust. At higher effusion rates, strain rates and velocities, lobes were emplaced through tearing or cracking. Tearing was characterized by ripping of the ductile crust near the initial breakout point, and most of the lobe surface was incandescent during its emplacement. This mechanism was observed to generate both smooth-surfaced lobes, and, when the lava encountered an obstacle, folded lobes. Cracking lobes were similar to those emplaced via tearing, but involved breaking of a thicker, brittle crust at the initial breakout of the lobe and therefore required somewhat higher flow rates than did tearing. Cracking lobes typically formed ropy folds in the center of the lobe, and smooth margins. At the highest effusion rates, strain rates, and flow velocities, the lava formed open channels with distinct levees. The final lobe morphologies were compared to results from laboratory simulations, which were designed to infer effusion rate from final flow morphology, to quantitatively test the laboratory results on the scale of individual natural pahoehoe lobes. There is general agreement between results from laboratory simulations and natural lavas on the scale of individual pahoehoe lobes, but there are disparities between laboratory flows and lava flows on the scale of an entire pahoehoe lava flow field.

Hawaii↗
USGS2004

What makes hydromagmatic eruptions violent? Some insights from the Keanakāko'i Ash, Kı̄lauea Volcano, Hawai'i

Volcanic eruptions at the summit of Kilauea Volcano, Hawai'i, are of two dramatically contrasting types: (1) benign lava flows and lava fountains; and (2) violent, mostly prehistoric eruptions that dispersed tephra over hundreds of square kilometers. The violence of the latter eruptions has been attributed to mixing of water and magma within a wet summit caldera; however, magma injection into water at other volcanoes does not consistently produce widespread tephras. To identify other factors that may have contributed to the violence of these eruptions, we sampled tephra from the Keanakako'i Ash, the most recent large hydromagmatic deposit, and measured vesicularity, bubble-number density and dissolved volatile content of juvenile matrix glass to constrain magma ascent rate and degree of degassing at the time of quenching. Bubble-number densities (9X10 (super 4) -1X10 (super 7) cm (super -3) ) of tephra fragments exceed those of most historically erupted Kilauean tephras (3X10 (super 3) -1.8X10 (super 5) cm (super -3) ), and suggest exceptionally high magma effusion rates. Dissolved sulfur (average=330 ppm) and water (0.15-0.45 wt.%) concentrations exceed equilibrium-saturation values at 1 atm pressure (100-150 ppm and approximately 0.09%, respectively), suggesting that clasts quenched before equilibrating to atmospheric pressure. We interpret these results to suggest rapid magma injection into a wet crater, perhaps similar to continuous-uprush jets at Surtsey. Estimates of Reynolds number suggest that the erupting magma was turbulent and would have mixed with surrounding water in vortices ranging downward in size to centimeters. Such fine-scale mixing would have ensured rapid heat exchange and extensive magma fragmentation, maximizing the violence of these eruptions.

Hawaii↗
USGS1996

Type of faulting and orientation of stress and strain as a function of space and time in Kilauea's south flank, Hawaii

Earthquake focal mechanisms of events occurring between 1972 and 1992 in the south flank of Kilauea volcano, Hawaii, are used to infer the state of stress and strain as a function of time and space. We have determined 870 fault plane solutions from P wave first motion polarities for events with magnitudes M L ≥ 2.5 and depth ranging between 6 and 12 km. Faulting is characterized by a mixture of decollement, reverse, and normal faults. Most large earthquakes with magnitude M < 7 slip on reverse faults striking NE at 40° and dipping SE between 60° and 70°. In Hawaii, the earthquakes with M > 7 rupture the decollement plane, since it is the only surface large enough to generate magnitude 7 or larger earthquakes. The percentage of reverse faulting events is high compared to the decollement and normal faulting mechanisms for the period 1972–1983. The percentage of decollement type focal mechanisms becomes dominant after 1983. This pattern of faulting activity suggests that pressure was building up within Kilauea's rift zone prior to the 1983 Puu'Oo eruption. Overall, a single stress orientation with the maximum compressive stress oriented SE perpendicular to the rift and dipping at 45° is compatible with the coeval existence of decollement, reverse, and normal faults. However, in a crustal volume east of longitude 155°10′W, we find a change of the orientation of σ 1 from nearly horizontal to plunging 45° SE occurring in 1979. This stress rotation suggests magma movements within the aseismic part of Kilauea's east rift zone. The strain and stress orientations are coaxial in the south flank except within the volume where the stress rotation is observed. We observe a change in the relationship between stress and strain directions caused either by the shifting of seismic activity from reverse faults to decollements, while stress stays constant, or by a rotation of stress, while strain remains constant. Assuming that the model of a noncohesive Coulomb wedge is appropriate for Kilauea's south flank, we find that high pore pressures are prevalent along the decollement and within the wedge for a coefficient of friction equal to 0.85.

Hawaii↗
USGS1995

Rapid deformation of the south flank of Kilauea volcano, Hawaii

The south flank of Kilauea volcano has experienced two large [magnitude ( M ) 7.2 and M 6.1] earthquakes in the past two decades. Global Positioning System measurements conducted between 1990 and 1993 reveal seaward displacements of Kilauea's central south flank at rates of up to about 10 centimeters per year. In contrast, the northern side of the volcano and the distal ends of the south flank did not displace significantly. The observations can be explained by slip on a low-angle fault beneath the south flank combined with dilation deep within Kilauea's rift system, both at rates of at least 15 centimeters per year.

Hawaii↗
USGS1989

Geologic analyses of Shuttle Imaging Radar (SIR-B) data of Kilauea Volcano, Hawaii

Analyses of imaging radar data of volcanic terranes on Earth and Venus have emphasized the need for a clearer understanding of how these data can be most effectively used to accomplish important volcanological goals, including the interpretation of eruptive styles and the characterization of the geologic history of volcanic centers. The second Shuttle Imaging Radar experiment (SIR-B) obtained two digital images over the summit caldera and the Southwest Rift Zone of Kilauea Volcano in 1984. Our geologic analyses of these images indicate that SIR-B data are particularly useful for delineating the distribution and surface textural variations of a'a lava flows, for mapping large-scale topographic features with radar-facing slopes, and for identifying an areally extensive pyroclastic deposit. Analyses of the SIR-B data of Kilauea, however, do not permit unambiguous identification of landforms such as pahoehoe lava flows, cinder cones, and fissures. Although separation of low-return units such as pahoehoe lava flows and adjacent pyroclastic ash is not greatly improved using standard image-enhancement techniques, the texture-analysis technique applied here did facilitate discrimination of such smooth-surfaced volcanic deposits. Although analyses of the SIR-B data permit a generally accurate interpretation of the eruptive history of Kilauea, the inability to distinguish low-return pahoehoe flows results in misinterpretation of several aspects of Kilauea volcanism, suggesting that caution should be exercised in the interpretation of SAR data of volcanic terranes.

Hawaii↗
USGS1986

Mechanical response of the south flank of Kilauea volcano, Hawaii, to intrusive events along the rift systems

Increased earthquake activity and compression of the south flank of Kilauea volcano, Hawaii, have been recognized by previous investigators to accompany rift intrusions. We further detail the temporal and spatial changes in earthquake rates and ground strain along the south flank induced by six major rift intrusions which occurred between December 1971 and January 1981. The seismic response of the south flank to individual rift intrusions is immediate; the increased rate of earthquake activity lasts from 1 to 4 weeks. Horizontal strain measurements indicate that compression of the south flank usually accompanies rift intrusions and eruptions. Emplacement of an intrusion at a depth greater than about 4 km, such as the June 1982 southwest rift intrusion, however, results in a slight extension of the subaerial portion of the south flank. Horizontal strain measurements along the south flank are used to locate the January 1983 east-rift intrusion, which resulted in eruptive activity. The intrusion is modeled as a vertical rectangular sheet with constant displacement perpendicular to the plane of the sheet. This model suggests that the intrusive body that compressed the south flank in January 1983 extended from the surface to about 2.4 km depth, and was aligned along a strike of N66°E. The intrusion is approximately 11 km in length, extended beyond the January 1983 eruptive fissures, which are 8 km in length and is contained within the 14-km-long region of shallow rift earthquakes.

Hawaii↗
USGS1972

Magma supply rate at Kilauea volcano, 1952-1971

The three longest Kilauea eruptions since 1952 produced lava at an overall constant rate of about 9 x 10 6 cubic meters per month (vesicle-free). This is considered to represent the rate of magma supply from a deep source, probably the mantle, because little or no summit deformation indicating high-level storage accompanied any of the three eruptions.

Hawaii↗
USGS1966

Crystallization of tholeiitic basalt in Alae Lava Lake, Hawaii

The eruption of Kilauea Volcano August 21–23, 1963, left 600,000 cubic meters of basaltic lava in a lava lake as much as 15 meters deep in Alae pit crater. Field studies of the lake began August 27 and include repeated core drilling, measurements of temperature in the crust and melt, and precise level surveys of the lake surface. The last interstitial melt in the lake solidified late in September 1964; by mid August 1965 the maximum temperature was 690°C at a depth of 11.5 meters. Pumice air-quenched from about 1140°C contains only 5 percent crystals — clinopyroxene, cuhedral olivine ( Fo 80 ), and a trace of plagioclase, ( An 70 ). Drill cores taken from the zone of crystallization in the lake show that olivine continued crystallizing to about 1070°C; below that it reacts with the melt, becoming corroded and mantled by pyroxene and plagioclase. Below 1070°C, pyroxene and plagioclase crystallized at a constant ratio. Ilmenite first appeared at about 1070°C and was joined by magnetite at about 1050°C; both increased rapidly in abundance to 1000°C. Apatite first appeared as minute needles in interstitial glass at 1000°C. Both the abundance and index of refraction of glass quenched from melt decreased nearly linearly with falling temperature. At 1070°C the quenched lava contains about 65 percent dark-brown glass with an index of 1.61; at 980°C it contains about 8 percent colorless glass with an index of 1.49. Below 980°C, the percentage of glass remained constant. Progressive crystallization forced exsolution of gases from the melt fraction; these formed vesicles and angular pores, causing expansion of the crystallizing lava and lifting the surface of the central part of the lake an average of 19.5 cm. The solidified basalt underwent pneumatolitic alteration, including deposition of cristobalite at 800°C, reddish alteration of olivine at 700°C, tarnishing of ilmenite at 550°C, deposition of anhydrite at 250°C, and deposition of native sulfur at 100°C. Ferric-ferrous ratios suggest that oxidation with maximum intensity between 550°C and 610°C moved downward in the crust as it cooled; this was followed by reduction at a temperature of about 100°C. The crystallized basalt is a homogeneous fine-grained rock containing on the average 48.3 percent by volume intergranular pyroxene (augite > pigeonite), 34.2 percent plagioclase laths (An 60 70 ), 7.9 percent interstitial glass, 6.9 percent opaques (ilmenite > magnetite), 2.7 percent olivine (Fo 70 80 ), and a trace of apatite. Chemical analyses of 18 samples, ranging from initially quenched pumice to lava cored more than a year after the eruption from the center and from near the base of the lake, show little variation from silica-saturated tholeiitic basalt containing 50.4 percent SiO 2 , 2.4 percent Na 2 O, and 0.54 percent K 2 O. Apparently there was no significant crystal settling and no appreciable vapor-phase transport of these components during the year of crystallization. However, seven samples of interstitial liquid that had been filter-pressed into gash fractures and drill holes from partly crystalline mush near the base of the crust show large differences from the bulk composition of the solidified crust—lower MgO, CaO, and Al 2 O 3 ; and higher total iron, TiO 2 , Na 2 O, K 2 O, P 2 O 5 , and F, and, in most samples, SiO 2 . The minor elements Ba, Ga, Li, Y, and Yb and possibly Cu tend to be enriched in the filter-pressed liquids, and Cr and possibly Ni tend to be depleted.

Hawaii↗
USGS1966

Deformation measurements on Kilauea volcano, Hawaii

Repeated electronic distance measurements across Kilauea Caldera with Tellurometers and Geodimeter show definite horizontal expansion related to the vertical uplift and outward tilting of the summit prior to an eruption, and contraction during and after a flank eruption. Measurements started in October 1964, along a 3098 meter line between Uwekahuna and Keanakakoi, indicate a relatively uniform lengthening of 12 centimeters during the interval October 22, 1964 to March 1, 1965. Rapid shortening of the line by 28 centimeters was measured 4 days after the beginning of a flank eruption which involved emission of approximately 29 million cubic meters of lava during the period March 5 to March 15, 1965. During the expansion, the standard deviation of 10 Tellurometer measurements from a least-squares srtaight line solution is ± 2.0 centimeters (6.5 ppm) whereas 9 Geodimeter measurements have a standard deviation of ± 1.1 (3.6 ppm) centimeters. Absolute distance readings between the two instruments differ by 4 centimeters (13 ppm), but relative changes in distance were the same on both instruments. Changes in distance across Kilauea Caldera can, therefore, be easily measured to accuracies of 4 to 7 parts per million with standard electronic distance measuring systems. On active volcanoes where ground surface deformation exceeds 10–100 parts per million with changes in subsurface magma pressure or volume, repeated horizontal distance measurements can be a most useful technique.

Hawaii↗