Geology Reports⌕ Search

Geology topics

Research about Kīlauea

Source-linked reports with geographic coverage including Kīlauea.

16 recordsLinked to original sources
USGS2024

Explosive 2018 eruptions at Kīlauea driven by a collapse-induced stomp-rocket mechanism

Explosive volcanic eruptions produce hazardous atmospheric plumes composed of tephra particles, hot gas and entrained air. Such eruptions are generally driven by magmatic fragmentation or steam expansion. However, an eruption mechanism outside this phreatic–magmatic spectrum was suggested by a sequence of 12 explosive eruptions in May 2018 at Kīlauea, Hawaii, that occurred during the early stages of caldera collapse and produced atmospheric plumes reaching 8 km above the vent. Here we use seismic inversions for reservoir pressure as a source condition for three-dimensional simulations of transient multiphase eruptive plume ascent through a conduit and stratified atmosphere. We compare the simulations with conduit ascent times inferred from seismic and infrasound data, and with plume heights from radar data. We find that the plumes are consistent with eruptions caused by a stomp-rocket mechanism involving the abrupt subsidence of reservoir roof rock that increased pressure in the underlying magma reservoir. In our model, the reservoir was overlain by a pocket of accumulated high-temperature magmatic gas and lithic debris, which were driven through a conduit approximately 600 m long to erupt particles at rates of around 3,000 m 3 s −1 . Our results reveal a distinct collapse-driven type of eruption and provide a framework for integrating diverse geophysical and atmospheric data with simulations to gain a better understanding of unsteady explosive eruptions.

Hawaii↗
USGS2024

Pre-existing ground cracks as lava flow pathways at Kīlauea in 2014

In 2014, the Pāhoa lava flow at Kīlauea, on the Island of Hawaiʻi (USA), entered a string of pre-existing meter-width ground cracks in the volcano’s East Rift Zone. The ground cracks transported lava below the surface in a direction discordant to the slope of the landscape. The cracks, which were 100s of meters long and 10s to 100s of meters deep, also widened by up to several meters as they filled, probably in part at the expense of adjacent cracks, which likely closed. Widening of the cracks caused shallow crustal blocks on the volcano’s flank to shift—this deformation was captured by a nearby GPS station and a borehole tiltmeter. The GPS station moved away from the cracks in response, while the tiltmeter showed tilting toward the cracks, consistent with opening. Noting that the lava-filled cracks act as top-fed dikes, we adapt existing theory for the thermo-rheological evolution of dikes to analyze transport of lava captured by ground cracks and propose mechanisms for the exit of the lava back to the surface. This study shows that ground cracks as narrow as 50 cm wide can facilitate the transport of advancing lava flows and can carry lava in directions that differ from those expected based on surface topography, invalidating flow path projections based on the assumption of subaerial flow.

Hawaii↗
USGS2023

Officially social: Developing a social media crisis communication strategy for USGS Volcanoes during the 2018 Kīlauea eruption

The USGS Volcano Science Center has a long history of science and crisis communication about volcanoes and their eruptions. Centered mainly on websites, email notifications, traditional media, and in-person interaction in the past, our toolkit has expanded in the last decade to include social media channels. This medium has allowed us to communicate with both long-standing and new audiences in new ways. In the process, social media communication has further developed trust in USGS researchers. In particular, the nearly 4-month-long 2018 eruption of Kīlauea volcano in the State of Hawaii necessitated the rapid development of a communication strategy that more deeply incorporated web and social media (Facebook and Twitter) channels to share critical eruption information. This was the first major volcanic eruption response where the USGS used official social media accounts as a significant form of public communication and outreach. These timely and conversive interactions furthered engagement with residents and reinforced the USGS as an authoritative and approachable voice on the eruption with U.S. and international audiences. In many cases, USGS Volcanoes' social media channels were also sampled directly by media outlets looking to provide current information, particularly by local reporters and citizen journalists. This helped disseminate scientific information directly to those who needed it and removed pressure from observatory scientists to respond to media requests. In short, the conversational tone and engaged and inquisitive online audience allowed the USGS Volcanoes' social media channels to act as a virtual community meeting, which nurtured a nearly continuous educational environment for both directly affected and distant members of the public. We present the history and details of this strategy here in hopes that it will benefit volcano observatories and other official agencies and crisis communicators.

Hawaii↗
USGS2023

Hawai‘i residents’ perceptions of Kīlauea’s 2018 eruption information

The 2018 eruption of Kīlauea Volcano was notable for its variety of large and spatially distinct hazards, simultaneously affecting three geographically disparate, culturally diverse regions in Hawaiʻi. We conducted a pilot study, consisting of 18 semi-structured interviews, two survey responses, and several informal conversations with Hawaiʻi residents to learn which sources/messengers of eruption information were deemed most trusted and credible. Participants' perceptions of the U.S. Geological Survey Hawaiian Volcano Observatory (HVO), community-based messengers, and traditional news media can be examined across four themes: relevance, expertise, sincerity, and pace. Among our interview participants, Lower East Rift Zone (LERZ) residents placed the highest trust in their community messengers, summit residents deemed HVO most trustworthy, and Kaʻū residents trusted information from both HVO and local news media. Our findings suggest that future official eruption communications would benefit from 1) designating communications personnel to act as community liaisons and 2) increasing pace and relevance of information delivery.

Hawaii↗
USGS2023

Ring fault creep drives volcano-tectonic seismicity during caldera collapse of Kīlauea in 2018

Basaltic caldera collapses are episodic, producing very-long-period (VLP) earthquakes up to M w 5.4, with prolific inter-collapse (between collapses) volcano-tectonic (VT) seismicity. During the 2018 caldera collapse of Kīlauea Volcano, VT seismicity ceased following each collapse, and then accelerated to a quasi-steady rate prior to the next collapse, marking a temporal pattern distinct from typical foreshock/aftershock sequences. There is currently no consensus on the mechanism(s) that generates the VT seismicity. Here we demonstrate that inter-collapse ring fault creep, induced by chamber depressurization, was the main driver of VT seismicity at Kīlauea in 2018. This is evidenced by: 1) the correlation between cumulative number of VT events and GNSS-derived ring fault creep; 2) agreement between repeating earthquake and GNSS derived creep rates; and 3) consistency between the time dependence of mechanically modeled, creep-driven seismicity and observations. We further show that, ring fault creep can be explained by velocity strengthening friction alone or in conjunction with viscous shear zone rheology. The simultaneous occurrence of creep and seismicity highlights the spatially heterogeneous velocity weakening/strengthening friction on the ring fault. If the VT seismicity-creep correlation can be replicated at other basaltic volcanoes, it would demonstrate that VT seismicity can be used as a proxy for ring fault creep in the absence of GNSS measurements on subsiding caldera block(s).

Hawaii↗
USGS2023

Microgravity as a tool for eruption forecasting

Detection of gravity change over time has been used to better understand magmatic activity at volcanoes for decades, but the technique is not commonly applied to forecasting eruptions. In contrast, other tools, notably seismic, deformation, and gas monitoring have made exceptional strides in the past several decades and form the foundation for eruption forecasting, especially during the final buildup to an eruption. Reasons for this gap include the high cost and fragile nature of gravity instruments, and the ambiguous nature of many results. But this is changing. Instrumentation is becoming more robust and accurate, expenses may soon diminish thanks to technological advances, and the record of success in tracking subsurface mass change (either from magma or hydrothermal fluids) in volcanic areas is growing. Here we review how gravity change can be applied to forecasting volcanic eruptions across a variety of spatial and temporal scales. We argue that microgravity has untapped potential as a forecasting tool in three specific ways: constraining probabilistic assessments, detecting long-term mass change that may occur prior to the onset of vigorous seismicity and deformation, and identifying transient activity that indicates magma ascent or other changes that immediately precede new eruptions or changes in ongoing eruptions. As with any volcano-monitoring method, microgravity has strengths and weaknesses, but the varied forms of data collection—for instance, campaign versus continuous, and relative versus absolute—offer the potential to record a broad range of signals at volcanoes with a diversity of magmatic systems. The technique is currently underutilized; additional attention, investment, and application at more volcanoes could help to realize its promise.

Hawai'i↗
USGS2022

Magma storage and transport timescales for the 1959 Kīlauea Iki eruption and implications for diffusion chronometry studies using time-series samples versus tephra deposits

Complex crystal cargo in basaltic eruptions has the potential to yield diverse insights on pre- and syn-eruptive timescales of magma storage and transport. Research on eruption products from the 1959 eruption from Kīlauea Iki Crater at Kīlauea volcano (Hawai‘i) demonstrates that time-series samples collected during an eruption can yield a wealth of information not accessible by studying the fall deposit alone. Major element zoning in olivine crystals illustrates four environments of magma storage that were variably mixed and progressively involved in the eruption. Diffusion timescales retrieved from crystals < 1 mm in size are typically much shorter than those from crystals > 1 mm, illustrating the additional complexity of information recorded by different grain sizes and olivine populations. The timescales can be divided into two groups: (1) t > 100 days reflect longer-term magma recharge into Kīlauea’s deep (8–10 km) reservoir system and (2) t < 100 days broadly correspond to a period of unrest and inflation beginning ~ 3 months prior to eruption. Some timescales reflect syn-eruptive processes, where diffusion began after the eruption onset. Progressive changes in zoning populations in the time-series scoriae samples illustrate how quickly diffusive re-equilibration can erase older magmatic histories and information and underscores that studies on fall deposits can lead to an incomplete record of magmatic processes. Thus, diffusion timescales from fall deposits alone should be cautiously interpreted with the caveat that they may be missing a substantial part of the total eruptive event and, therefore, the record of magmatic histories inferred from crystal cargo.

Hawaii↗
USGS2021

The petrologic and degassing behavior of sulfur and other magmatic volatiles from the 2018 eruption of Kīlauea, Hawaiʻi: Melt concentrations, magma storage depths, and magma recycling

Kīlauea Volcano’s 2018 lower East Rift Zone (LERZ) eruption produced exceptionally high lava effusion rates and record-setting SO 2 emissions. The eruption involved a diverse range of magmas, including primitive basalts sourced from Kīlauea’s summit reservoirs. We analyzed LERZ matrix glasses, melt inclusions, and host minerals to identify melt volatile contents and magma storage depths. The LERZ glasses and melt inclusions span nearly the entire compositional range previously recognized at Kīlauea. Melt inclusions in Fo 86-89 olivine from the main eruptive vent (fissure 8) underwent 70–170 °C cooling during transport in LERZ carrier melts, causing extensive post-entrapment crystallization and sulfide precipitation. Many of these melt inclusions have low sulfur (400–900 ppm) even after correction for sulfide formation. CO 2 and H 2 O vapor saturation pressures indicate shallow melt inclusion trapping depths (1–5 km), consistent with formation within Kīlauea’s Halemaʻumaʻu and South Caldera reservoirs. Many of these inclusions also have degassed δ 34 S values (− 1.5 to − 0.5‰). Collectively, these results indicate that some primitive melts experienced near-surface degassing before being trapped into melt inclusions. We propose that decades-to-centuries of repeated lava lake activity and lava drain-back during eruptions (e.g., 1959 Kīlauea Iki) recycled substantial volumes of degassed magma into Kīlauea’s shallow reservoir system. Degassing and magma recycling from the 2008–2018 Halemaʻumaʻu lava lake likely reduced the volatile contents of LERZ fissure 8 magmas, resulting in lower fountain heights compared to many prior Kīlauea eruptions. The eruption’s extreme SO 2 emissions were due to high lava effusion rates rather than particularly volatile-rich melts.

Hawaii↗
USGS2018

Focused seismicity triggered by flank instability on Kīlauea's Southwest Rift Zone

Swarms of earthquakes at the head of the Southwest Rift Zone on Kīlauea Volcano, Hawaiʻi, reveal an interaction of normal and strike-slip faulting associated with movement of Kīlauea's south flank. A relocated subset of earthquakes between January 2012 and August 2014 are highly focused in space and time at depths that are coincident with the south caldera magma reservoir beneath the southern margin of Kīlauea Caldera. Newly calculated focal mechanisms are dominantly dextral shear with a north-south preferred fault orientation. Two earthquakes within this focused area of seismicity have normal faulting mechanisms, indicating two mechanisms of failure in very close proximity (10's of meters to 100 m). We suggest a model where opening along the Southwest Rift Zone caused by seaward motion of the south flank permits injection of magma and subsequent freezing of a plug, which then fails in a right-lateral strike-slip sense, consistent with the direction of movement of the south flank. The seismicity is concentrated in an area where a constriction occurs between a normal fault and the deeper magma transport system into the Southwest Rift Zone. Although in many ways the Southwest Rift Zone appears analogous to the more active East Rift Zone, the localization of the largest seismicity (>M2.5) within the swarms to a small volume necessitates a different model than has been proposed to explain the lineament outlined by earthquakes along the East Rift Zone.

Hawaii↗
USGS2017

Conversing with Pelehonuamea: A workshop combining 1,000+ years of traditional Hawaiian knowledge with 200 years of scientific thought on Kīlauea volcanism

The events surrounding volcanic eruptions and damaging earthquakes in Hawai‘i have often been described in journals, letters, and newspapers articles in the English language; however, the Hawaiian nation was among the most literate of countries in the 19th century, and many Hawaiian-language newspapers were in circulation through all but the earliest decades of the 19th century. Any modern reconstruction of the history of Hawaiian eruptions or earthquakes should take advantage of all available sources, and so we seek to add the Hawaiian-language newspaper articles, journals, stories, and chants to the volcano and earthquake literature. These sources have been used in many recent volcanological studies. Another aspect to the mix of science and traditional Hawaiian values is that many of the volcanic summits in Hawaiʻi are considered sacred to Hawaiians. Hawaiian travelers brought the first Western missionary team to the summit of Kīlauea and advised them of the proper protocols and behaviors while in this sacred area. The missionaries dismissed this advice as native superstition and they began a campaign of aggressively stamping out customs and protocols related to the Hawaiian volcano goddess Pelehonuamea. What has survived as native knowledge of the volcanoes is a few phrases from native guides included in some of the missionaries’ journals, and a few stories. Pualani and Ku ʻ ulei Kanahele provide excellent introductions to the Pelehonuamea chants. In the 21st century, amid a reawakening of Hawaiian culture, modern Hawaiians are demanding protection of their sacred areas, and scientists must be aware of these interests. At the very least, scientists should show respect to Hawaiian values when working in these areas, and should try to minimize disruptions caused by their work. Kaeo Duarte, Peter Mills, and Scott Rowland describe taking this approach in their field work. Traditional knowledge is also contained in place names. It is important not only to preserve old place names and to recover those no longer used, but also to preserve the stories of those places. Bobby Camara talks about the joys and frustrations of getting information on and recovering Hawaiian place names. Finally, we hope that a broader interest in Hawaiian views about locations in Hawaiʻi where physical scientific work is done will be as beneficial to physical scientists as it has been to life scientists investigating Hawaiian lifeforms on land and in the ocean, and that both studies will continue to benefit the native peoples of Hawaiʻi. Note that these proceedings are transcripts of oral presentations illustrated with PowerPoint presentations or charts. Although every effort has been made to assure the accuracy of the oral presentations, there are some gaps where words are not discernible in the voice recordings and are so noted. In other places, bracketed words were added to clarify the speaker’s meaning.

Hawaii↗
USGS2015

Onset of a basaltic explosive eruption from Kīlauea’s summit in 2008

The onset of a basaltic eruption at the summit of Kīlauea volcano in 2008 is recorded in the products generated during the first three weeks of the eruption and suggests an evolution of both the physical properties of the magma and also lava lake levels and vent wall stability. Ash componentry and the microtextures of the early erupted lapilli products reveal that the magma was largely outgassed, perhaps in the preceding weeks to months. An increase in the juvenile:lithic ratio and size of ash collected from March 23 to April 3 records an increasing level of the magma within the conduit. After April 3 until the explosive eruption of April 9, a trend of decreasing juvenile:lithic ratio suggests that vent wall collapses were more frequent, possibly because lava level increased and destabilized the overhanging wall [Orr et al. 2013]. Despite increasing lake height, the microtextural characteristics of the lapilli suggest that the outgassed end-member was still being tapped between March 26 and April 8. The April 9 rockfall triggered an explosive eruption that produced a new component in the eruption deposits not seen in the preceding weeks; microvesicular juvenile lapilli, the first evidence of an actively vesiculating magma. Two additional dense end-member pyroclast types were also erupted during the April 9 explosion, likely related to outgassed magma with longer residence times than the microvesicular magma. We link these pyroclasts to a stagnant viscous crust at the top of the magma column or to convecting, downwelling magma. Our study of ash componentry and the textures of juvenile lapilli suggests that the April 9 explosive event effectively cleared the conduit of largely outgassed magma. The degassing processes during this eruption are complex and varied: in the period of persistent degassing during March 26-April 8 small resident bubbles at shallow levels in the lava lake were coupled to the magma whereas large bubbles ascended, expanded and fragmented. During the rockfall- triggered explosion of April 9, all bubbles were coupled to the host magma on the timescale of decompression, but additional exsolution, decompression and expansion of deeper, more gas-rich resident magma likely occurred [cf. Carey et al. 2012]. Where external conditions play a significant role in eruption dynamics, e.g., by triggering eruptions, vesiculation and degassing dynamics can be expected to be complex.

Hawai'i↗
USGS2013

Convection in a volcanic conduit recorded by bubbles

Microtextures of juvenile pyroclasts from Kīlauea’s (Hawai‘i) early A.D. 2008 explosive activity record the velocity and depth of convection within the basaltic magma-filled conduit. We use X-ray microtomography (μXRT) to document the spatial distribution of bubbles. We find small bubbles (radii from 5 μm to 70 μm) in a halo surrounding larger millimeter-size bubbles. This suggests that dissolved water was enriched around the larger bubbles—the opposite of what is expected if bubbles grow as water diffuses into the bubble. Such volatile enrichment implies that the volatiles within the large bubbles were redissolving into the melt as they descended into the conduit by the downward motion of convecting magma within the lava lake. The thickness of the small bubble halo is ∼100–150 μm, consistent with water diffusing into the melt on time scales on the order of 10 3 s. Eruptions, triggered by rockfall, rapidly exposed this magma to lower pressures, and the haloes of melt with re-dissolved water became sufficiently supersaturated to cause nucleation of the population of smaller bubbles. The required supersaturation pressures are consistent with a depth of a few hundred meters and convection velocities of the order of 0.1 m s −1 , similar to the circulation velocity observed on the surface of the Halema‘uma‘u lava lake.

Hawai'i↗
USGS2001

Volcano monitoring using the Global Positioning System: Filtering strategies

Permanent Global Positioning System (GPS) networks are routinely used for producing improved orbits and monitoring secular tectonic deformation. For these applications, data are transferred to an analysis center each day and routinely processed in 24-hour segments. To use GPS for monitoring volcanic events, which may last only a few hours, real-time or near real-time data processing and subdaily position estimates are valuable. Strategies have been researched for obtaining station coordinates every 15 min using a Kalman filter; these strategies have been tested on data collected by a GPS network on Kilauea Volcano. Data from this network are tracked continuously, recorded every 30 s, and telemetered hourly to the Hawaiian Volcano Observatory. A white noise model is heavily impacted by data outages and poor satellite geometry, but a properly constrained random walk model fits the data well. Using a borehole tiltmeter at Kilauea's summit as ground-truth, solutions using different random walk constraints were compared. This study indicates that signals on the order of 5 mm/h are resolvable using a random walk standard deviation of 0.45 cm/√h. Values lower than this suppress small signals, and values greater than this have significantly higher noise at periods of 1–6 hours.

Hawai'i↗
USGS2001

Spatial extent of a hydrothermal system at Kilauea Volcano, Hawaii, determined from array analyses of shallow long-period seismicity 1. Method

We present a probabilistic method to locate the source of seismic events using seismic antennas. The method is based on a comparison of the event azimuths and slownesses derived from frequency-slowness analyses of array data, with a slowness vector model. Several slowness vector models are considered including both homogeneous and horizontally layered half-spaces and also a more complex medium representing the actual topography and three-dimensional velocity structure of the region under study. In this latter model the slowness vector is obtained from frequency-slowness analyses of synthetic signals. These signals are generated using the finite difference method and include the effects of topography and velocity structure to reproduce as closely as possible the behavior of the observed wave fields. A comparison of these results with those obtained with a homogeneous half-space demonstrates the importance of structural and topographic effects, which, if ignored, lead to a bias in the source location. We use synthetic seismograms to test the accuracy and stability of the method and to investigate the effect of our choice of probability distributions. We conclude that this location method can provide the source position of shallow events within a complex volcanic structure such as Kilauea Volcano with an error of ±200 m.

Hawai'i↗
USGS1992

The ten-year eruption of Kilauea Volcano

The Pu'u 'O' o-Kupaianaha eruption now ranks as the longest-lived historic eruption on the East Rift Zone and the most destructive in Kilauea's recent history. About 1 km 3 of lava erupted during the first 0 years of the eruption. Lava flows have destroyed 181 houses and severed the coastal highway along the volcano's south flank, severely restricting transportation on this part of the island of Hawaii. the eruption consisted of many distinct episodes characterized by activity at different vents and by different eruptive styles. the following summarizes the first 10 years of the eruption, starting with the initial outbreak in 1983.

Hawaii↗