Evaluation and application of the Purge Analyzer Tool (PAT) to determine in-well flow and purge criteria for sampling monitoring wells at the Stringfellow Superfund site in Jurupa Valley, California, in 2017
The U.S. Geological Survey and U.S. Environmental Protection Agency are developing analytical tools to assess the representativeness of groundwater samples from fractured-rock aquifers. As part of this effort, monitoring wells from the Stringfellow Superfund site in Jurupa Valley in Riverside County, California, approximately 50 miles east of Los Angeles, were field tested to collect information to assist in the evaluation and application of in-well flow as computed by the analytical model called the Purge Analyzer Tool, which computes in-well groundwater travel times for simple piston transport of inflowing groundwater from open intervals of a monitoring well to the pump intake and can provide insight into optimal purging parameters (duration, rate, and pump position) needed for the collection of representative groundwater samples. Field testing of wells included hydraulic, chemistry, and dye tracer analysis to investigate travel times in wells under pumping conditions. The Purge Analyzer Tool was able to replicate dye velocities (travel times) for one of three wells that had appreciable inflow from the aquifer but not the other two wells, which are screened in low-permeability sediments and rock, where flow was dominated by borehole storage. A set of criteria was established to help assess the ability to collect representative groundwater chemistry from monitoring wells; criteria included understanding the height of the static well water column and relative exchange rate between the aquifer and the well.