Geology Reports⌕ Search

Geology topics

Research about Idaho, Montana

Source-linked reports with geographic coverage including Idaho, Montana.

At least 55 records · Page 3Linked to original sources

Preliminary cellular-automata forecast of permit activity from 1998 to 2010, Idaho and Western Montana

For public land management in Idaho and western Montana, the U.S. Forest Service (USFS) has requested that the U.S. Geological Survey (USGS) predict where mineral-related activity will occur in the next decade. Cellular automata provide an approach to simulation of this human activity. Cellular automata (CA) are defined by an array of cells , which evolve by a simple transition rule, the automaton . Based on exploration trends, we assume that future exploration will focus in areas of past exploration. Spatial-temporal information about mineral-related activity, that is permits issued by USFS and Bureau of Land Management (BLM) in the last decade, and spatial information about undiscovered resources, provide a basis to calibrate a CA. The CA implemented is a modified annealed voting rule that simulates mineral-related activity with spatial and temporal resolution of 1 mi 2 and 1 year based on activity from 1989 to 1998. For this CA, the state of the economy and exploration technology is assumed constant for the next decade. The calibrated CA reproduces the 1989–1998-permit activity with an agreement of 94%, which increases to 98% within one year. Analysis of the confusion matrix and kappa correlation statistics indicates that the CA underestimates high activity and overestimates low activity. Spatially, the major differences between the actual and calculated activity are that the calculated activity occurs in a slightly larger number of small patches and is slightly more uneven than the actual activity. Using the calibrated CA in a Monte Carlo simulation projecting from 1998 to 2010, an estimate of the probability of mineral activity shows high levels of activity in Boise, Caribou, Elmore, Lincoln, and western Valley counties in Idaho and Beaverhead, Madison, and Stillwater counties in Montana, and generally low activity elsewhere.

Idaho, Montana↗

Genetic structure of Columbia River redband trout populations in the Kootenai River drainage, Montana, revealed by microsatellite and allozyme loci

We describe the genetic divergence among 10 populations of redband trout Oncorhynchus mykiss gairdneri from the upper Columbia River drainage. Resident redband trout from two watersheds in the Kootenai River drainage and hatchery stocks of migratory Kamloops redband trout from Kootenay Lake, British Columbia, were analyzed using allele frequency data from microsatellite and allozyme loci. The Kamloops populations have significantly different allele frequencies from those of the Kootenai River drainage. Of the total genetic variation detected in the resident redband trout, 40.7% (microsatellites) and 15.5% (allozymes) were due to differences between populations from the two Kootenai River watersheds. The divergence among populations within each watershed, however, was less than 3.5% with both techniques. Our data indicate that watershed-specific broodstocks of redband trout are needed by fisheries managers for reintroduction or the supplementation of populations at risk of extinction.

Idaho, Montana↗

Map of normal faults and extensional folds in the Tendoy Mountains and Beaverhead Range, Southwest Montana and eastern Idaho

Compilation of a 1:100,000-scale map of normal faults and extensional folds in southwest Montana and adjacent Idaho reveals a complex history of normal faulting that spanned at least the last 50 m.y. and involved six or more generations of normal faults. The map is based on both published and unpublished mapping and shows normal faults and extensional folds between the valley of the Red Rock River of southwest Montana and the Lemhi and Birch Creek valleys of eastern Idaho between latitudes 45°05' N. and 44°15' N. in the Tendoy and Beaverhead Mountains. Some of the unpublished mapping has been compiled in Lonn and others (2000). Many traces of the normal faults parallel the generally northwest to north-northwest structural grain of the preexisting Sevier fold and thrust belt and dip west-southwest, but northeastand east-striking normal faults are also prominent. Northeaststriking normal faults are subparallel to the traces of southeast-directed thrusts that shortened the foreland during the Laramide orogeny. It is unlikely that the northeast-striking normal faults reactivated fabrics in the underlying Precambrian basement, as has been documented elsewhere in southwestern Montana (Schmidt and others, 1984), because exposures of basement rocks in the map area exhibit north-northwest- to northwest-striking deformational fabrics (Lowell, 1965; M’Gonigle, 1993, 1994; M’Gonigle and Hait, 1997; M’Gonigle and others, 1991). The largest normal faults in the area are southwest-dipping normal faults that locally reactivate thrust faults (fig. 1). Normal faulting began before middle Eocene Challis volcanism and continues today. The extension direction flipped by about 90° four times.

Idaho, Montana↗

Raster images of geologic maps of Middle Proterozoic Belt strata in parts of Benewah, Bonner, Kootenai and Shoshone Counties, Idaho and Lincoln, Mineral and Sanders Counties, Montana

Geologic maps of the western part of the Belt Basin of western Montana and northern Idaho were converted into digital raster (TIFF image) format to facilitate their manipulation in geographic information systems. The 85-mile x 100-mile map area mostly contains rocks belonging to the lower and middle Belt Supergroup. The area is of interest as these Middle Proterozoic strata contain vein-type lead-zinc-silver deposits in the Coeur d?Alene Mining District in the St. Regis and Revett formations and strata-bound copper-silver deposits, such as the Troy mine, within the Revett Formation. The Prichard Formation is also prospective for strata-bound lead-zinc deposits because equivalent Belt strata in southern British Columbia, Canada host the Sullivan lead-zinc deposit. Map data converted to digital images include 13 geological maps at scales ranging from 1:48,000 to 1:12,000. Geologic map images produced from these maps by color scanning were registered to grid tick coverages in a Universal Transverse Mercator (North American Datum of 1927, zone 11) projection using ArcView Image Analysis. Geo-registering errors vary from 10 ft to 114 ft.

Idaho, Montana↗

Digital geologic map of the Coeur d'Alene 1:100,000 quadrangle, Idaho and Montana

Between 1961 and 1969, Alan Griggs and others conducted fieldwork to prepare a geologic map of the Spokane 1:250,000 map (Griggs, 1973). Their field observations were posted on paper copies of 15-minute quadrangle maps. In 1999, the USGS contracted with the Idaho Geological Survey to prepare a digital version of the Coeur d’Alene 1:100,000 quadrangle. To facilitate this work, the USGS obtained the field maps prepared by Griggs and others from the USGS Field Records Library in Denver, Colorado. The Idaho Geological Survey (IGS) digitized these maps and used them in their mapping program. The mapping focused on field checks to resolve problems in poorly known areas and in areas of disagreement between adjoining maps. The IGS is currently in the process of preparing a final digital spatial database for the Coeur d’Alene 1:100,000 quadrangle. However, there was immediate need for a digital version of the geologic map of the Coeur d’Alene 1:100,000 quadrangle and the data from the field sheets along with several other sources were assembled to produce this interim product. This interim product is the digital geologic map of the Coeur d’Alene 1:100,000 quadrangle, Idaho and Montana. It was compiled from the preliminary digital files prepared by the Idaho Geological, and supplemented by data from Griggs (1973) and from digital databases by Bookstrom and others (1999) and Derkey and others (1996). The resulting digital geologic map (GIS) database can be queried in many ways to produce a variety of geologic maps. Digital base map data files (topography, roads, towns, rivers and lakes, etc.) are not included: they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:100,000 (e.g., 1:62,500 or 1:24,000). The digital geologic map graphics (of00-135_map.pdf) that are provided are representations of the digital database. The map area is located in north Idaho. This open-file report describes the geologic map units, the methods used to convert the geologic map data into a digital format, the ArcInfo GIS file structures and relationships, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet.

Idaho, Montana↗

Revision of middle Proterozoic Yellowjacket Formation, central Idaho, and revision of Cretaceous Slim Sam Formation, Elkhorn Mountains area, Montana

The Yellowjacket Formation is restricted to the strata originally assigned to it by Ross (1934). The Yellowjacket, the conformably overlying Hoodoo Quartzite, and succeeding unnamed argillaceous quartzite unit form a genetically related sequence that lies in a structural block delimited on the northeast by the Iron Lake fault. Directly northeast of the fault, strata currently assigned by others to the lower subunit of the Yellowjacket are correlated with the Apple Creek Formation in the Lemhi Range. Mapping in the western part of the Lemhi Range shows that the Apple Creek Formation lies depositionally above the Big Creek Formation and that no rocks of the Yellowjacket-Hoodoo unnamed unit stratigraphic sequence are present. In contrast, in the area of the Yellowjacket mapped by Ross (1934) and the area directly northeast of the Iron Lake Fault, the Big Creek Formation is absent, even though it is 2,700 m thick in the Lemhi Range. These data indicate that the Iron Lake Fault juxtaposed the Yellowjacket-Hoodoo-unnamed unit sequence against non-Yellowjacket strata to the northeast. The Upper Cretaceous Slim Sam Formation of the Elkhorn Mountains area is revised. Strata of the lower part are correlated with the regionally recognized marine Telegraph Creek Formation and the overlying marine to marginal marine Eagle Sandstone. Only lower strata of the Eagle are present in the study area and they are preserved discontinously. The nonmarine volcanic and volcaniclastic rocks of the upper part of the Slim Sam as originally defined retain the name Slim Sam Formation. These rocks, mainly of sedimentary origin, are genetically related to the Elkhorn Mountains Volcanics. The lower contact of the Slim Sam (restricted) is unconformable above the Eagle Sandstone or more commonly above the Telegraph Creek Formation. The upper contact is conformable with the Elkhorn Mountains Volcanics.

Idaho, Montana↗

Correlation of Upper Cretaceous strata from Lima Peaks area to Madison Range, southwestern Montana and southeastern Idaho, USA

An 40 Ar/ 39 Ar age of 85.81 Ma±0.22 my was obtained on sanidine from a volcanic procellanite bed near the top of the 2135+m-thick Upper Cretaceous Frontier Formation in the Lima Peaks area of southwestern Montana. This early Santonian age, combined with previously determined age data including a palynological age of Cenomanian for the lower Frontier at Lima Peaks, and a U-Pb isotopic date of about 95 Ma for the base of the Frontier Formation in the eastern Pioneer Mountains north of the Lima Peaks area, provides an age range for the nonmarine formation. In the Madison Range, farther east in southweastern Montana, this age range corresponds to marine strata of not only the Frontier Formation, but also the overlying Cody Shale and Telegraph Creek Formation, a sequence that totals less than 760 m thick. The Upper Cretaceous marine formations of the Madison Range are closely zoned by molluscan faunas that are well constrained with radiometric dates. The 40 Ar/ 39 Ar age of 85.81 Ma±0.22 my at Lima Peaks is bracketed by radiometric dates for the Scaphites depressus—Protexanites bourgeoisianus biozone and the overlying Clioscaphites saxitonianus—Inoceramus undulatopilcatus biozone of the Western Interior. Fossils of both of these biozones are present in the Cody Shale and the Telegraph Creek Formation in the Madison Range. The Telegraph Creek contains two units of volcanic ash that are approximate time equivalents of the volcanic procellanite of the Lima Peaks area. Clasts in the conglomerate of the upper part of the Frontier in the Lima Peaks area were shed during the initial stages of uplift of the Blacktail-Snowcrest Highlands which rose to the north. The dated porcellanite lies above the conglomerates and indicates that the uplift was initiated by middle or late Coniacian, 87–88 Ma.

Idaho, Montana↗

A 12 000 year radiocarbon date of deglaciation from the Continental Divide of northwestern Montana

During the Pinedale (Late Wisconsinan) glaciation, an outlet glacier from a mountain ice field flowed eastward across the Continental Divide through Marias Pass in northwestern Montana. This outlet glacier was the major source of the Two Medicine glacier, a large piedmont glacier that extended from the mountain front east about 55 km onto the plains. An accelerator mass spectrometry radiocarbon age of 12 194 ± 145 BP (AA-9530) was obtained from a wood fragment, underlying a Glacier Peak tephra and a Mount Saint Helens set J tephra in a section of lake sediments, near Marias Pass. This radiocarbon age provides a minimum date of deglaciation for the Marias Pass area that is about 800 years older than a previous estimate. Furthermore, the radiocarbon age indicates that the Two Medicine glacier was no longer being supplied by its major source and if it still existed was only as a dying, stagnant ice mass.

Idaho, Montana↗

Statistical summaries of streamflow data for selected gaging stations in Idaho and western Wyoming through September 1990 — Volume 2: Gaging stations with 5 to 9 years of record or that measure discharge from springs

This volume presents statistical summaries of streamflow data for 76 gaging stations with 5 to 9 years of continuous record, or with records of discharge measurements from springs, through September 1990. The gaging stations are located in Idaho and western Wyoming. Some of the gaging stations at which spring discharge is measured have 10 or more years of record. Volume 1 presents statistical summaries of streamflow data for 257 gaging stations with 10 or more years of continuous record through September 1990. The gaging stations are located in Idaho and adjacent States. Streamflow statistics generated for gaging stations with 5 to 9 years of record or that measure discharge from springs were (1) magnitudes of monthly and annual flows; (2) duration of daily mean flows; and (3) maximum, median, and minimum daily mean flows. Streamflow statistics generated for stations with 10 or more years of record (volume 1) were (1) magnitudes of monthly and annual flows; (2) magnitudes and frequencies of daily low, high, instantaneous peak (flood frequency), and annual mean flows; (3) duration of daily mean flows; and (4) maximum, median, and minimum daily mean flows.

Idaho, Montana↗

Allochthonous impact-shocked rocks and superimposed deformations at the Beaverhead site in southwest Montana

Upward-pointing shatter cones in sandstones of uncertain age (Middle Proterozoic? to Lower Cambrian?) and older crystalline basement rocks are exposed over an area of approximately 25 × 8 km in southwestern Montana. These shatter cones, together with pseudotachylites and breccias of various types (particularly in basement gneisses), are inferred to be products of a meteorite or cometary impact. However, Late Cretaceous contraction and Tertiary extension have contributed to the structural complexity of the area, and distinguishing unequivocally the shock brecciation from that due to younger tectonism is difficult. Stratigraphic constraints suggest the structure is Late Proterozoic or Cambrian in age. The shocked rocks are present in the Cabin thrust plate—one of many in the Late Cretaceous Cordilleran Thrust belt—and hence are allochthonous, having been transported tens of kilometers from the west. They are considered to represent only a piece from the central uplift of an original complex crater at least 75 km in diameter. It is speculated that some of the considerable uplift and erosion inferred to have taken place in Late Proterozoic to early Paleozoic time in east-central Idaho (The Lemhi arch) may be related to the postulated impact event. Furthermore, quasi-circular magnetic and regional gravity anomalies (50 to 75 km diameter) centered south-southeast of Challis, Idaho, may mark the concealed scar of the original impact structure.

Idaho, Montana↗

Mineral resource assessment of the Dillon 1° x 2° quadrangle, Idaho and Montana

The Dillon 1 ° x2° quadrangle in southwestern Montana and east-central Idaho was investigated as part of the U.S. Geological Survey's Conterminous United States Mineral Assessment Program (CUSMAP) to determine its mineral resource potential. An interdisciplinary study was made of geology, geochemistry, geophysics (gravity and aeromagnetics), remote sensing, and mineral deposits. The results of those studies, as well as mineral resource assessment of numerous mineraldeposit types, are published separately as a folio of maps. This report summarizes the studies, provides background information on them, and presents a selected bibliography relevant to the geology and mineral resources of the quadrangle. The quadrangle contains large resources of gold and substantial resources of talc and chlorite, all of which were being mined in the 1980's and early 1990's. Submarginal resources of molybdenum, copper, tungsten, and iron range from moderately large to large. Other commodities that may be present in significant amounts are chromite, lead, zinc, silver, barite, zeolite minerals, and various nonmetallic metamorphic minerals.

Idaho, Montana↗

Maps showing mineral resource assessment for vein and replacement deposits of base and precious metals, barite, and fluorspar, Dillon 1° x 2° quadrangle, Idaho and Montana

This report is one of several that assess the mineral resources in the Dillon quadrangle. For the purpose of the assessment, the deposits that are known in the quadrangle, or suspected to be present from a knowledge of the geologic setting, have been grouped into 30 deposit types on the basis of the mineralogy or commodity in the ore and the structural or depositional setting of the deposit. The emphasis in these assessment reports is on metallic minerals, but some important nonmetallic minerals are also considered. Fossil fuels are beyond the scope of this investigation, phosphate and uranium have been investigated previously (Swanson, 1970; Wodzicki and Krason, 1981 ), and certain nonmetallic minerals, including bulk commodities such as sand and gravel, are in large supply and thus are not considered. The mineral resource assessment discussed in this report concentrates on a single deposit type (of the total of 30 types) that we call "vein and replacement deposits of base and precious metals." Base and precious metals produced from such deposits are copper, lead, zinc, gold, and silver. Vein deposits of barite and fluorspar are also discussed, but because they seem to be of minor importance, they are treated briefly. Vein and replacement deposits of base and precious metals are classified as a single deposit type rather than as numerous possible subordinate types that might be distinguished on the basis of mineralogy, metal content, or other factors, because the characteristics of the ore, the ore bodies, and the structural setting are not sufficiently well known to yield a consistent detailed classification for the entire quadrangle. Furthermore, the criteria used here to explain the localization of deposits are too general to allow discrimination among subordinate types at a scale of 1 :250,000 or smaller. In assessing mineral resources, we have adopted a general philosophy similar to that of Harrison and others ( 1986). We attempt to identify parts of the quadrangle that are favorable for the occurrence of mineral resources, and we make an assignment of the relative resource potential of all parts of the quadrangle. We do not attempt to locate specific exploration targets nor to determine the quantity of reserves or resources present.

Idaho, Montana↗

Maps showing mineral resource assessment for copper and molybdenum in porphyry and stockwork deposits and for tungsten, iron, gold, copper, and silver in skarn deposits, Dillon 1° x 2° quadrangle, Idaho and Montana

This report is one of several in the series that assess the mineral resources of the Dillon quadrangle. For the purpose of the assessment, mineral deposits· in the quadrangle that are either known or suspected from a knowledge of the geologic setting have been grou~d into 30 deposit types on the basis of mineralogy, commodity, or structural or depositional setting. The emphasis in these assessment reports is on metallic minerals, but some important nonmetallic minerals will also be assessed. Fossil fuels are beyond the scope of this investigation; phosphate and uranium have been investigated previously (Swanson, 1970; Wodzicki andKrason, 1981); and certain nonmetallic. minerals, including bulk commodities such as sand and gravel, are in large supply and thus not considered. The ·mineral resource assessment discussed in this report considers two deposit types: (1) porphyry or stockwork deposits of copper. and molybdenum (referred to generally in this report as porphyry deposits) and (2) skarn deposits of tungsten, iron, gold, copper, and silver. Combining copper and molybenum porphyry deposits into a single deposit type is believed necessary for this purpose· mainly because the two metals are found together in most .deposits in the quadrangle, a geochemical signature unique to each has not been determined, and the significant petrologic characteristics of many associated plutons are not well known, especially characterist~cs of subsurface plutons whose presence is .inferred from geophysical data. In assessing mineral resources,· we have adopted a general philosophy similar to that of Harrison and others (19S6). We attempt to identify those parts of the quadrangle that are favorable for the occurrence of mineral resources. We do not attempt to locate specific exploration targets nor to determine the quantity of reserves or resources present.

Idaho, Montana↗