Geology Reports⌕ Search

Geology topics

Research about Hinsdale County, Colorado

Source-linked reports with geographic coverage including Hinsdale County, Colorado.

5 recordsLinked to original sources
USGS2015

Hydraulic, geomorphic, and trout habitat conditions of the Lake Fork of the Gunnison River in Hinsdale County, Lake City, Colorado, Water Years 2010-2011

Channel rehabilitation, or reconfiguration, to mitigate a variety of riverine problems has become a common practice in the western United States. However, additional work to monitor and assess the channel response to, and the effectiveness of, these modifications over longer periods of time (decadal or longer) is still needed. The Lake Fork of the Gunnison River has been an area of active channel modification to accommodate the needs of the Lake City community since the 1950s. The Lake Fork Valley Conservancy District began a planning process to assess restoration options for a reach of the Lake Fork in Lake City to enhance hydraulic and ecologic characteristics of the reach. Geomorphic channel form is affected by land-use changes within the basin and geologic controls within the reach. The historic channel was defined as a dynamic, braided channel with an active flood plain. This can result in a natural tendency for the channel to braid. A braided channel can affect channel stability of reconfigured reaches when a single-thread meandering channel is imposed on the stream. The U.S. Geological Survey, in cooperation with the Colorado Water Conservation Board and Colorado River Water Conservation District, began a study in 2010 to quantify existing hydraulic and habitat conditions for a reach of the Lake Fork of the Gunnison River in Lake City, Colorado. The purpose of this report is to quantify existing Lake Fork hydraulic and habitat conditions and establish a baseline against which post-reconfiguration conditions can be compared. This report (1) quantifies the existing hydraulic and geomorphic conditions in a 1.1-kilometer section of the Lake Fork at Lake City that has been proposed as a location for future channel-rehabilitation efforts, (2) characterizes the habitat suitability of the reach for two trout species based on physical conditions within the stream, and (3) characterizes the current riparian canopy density. The FaSTMECH computational flow-model within MD_SWMS was selected to characterize the effects of streamflow on hydraulic and habitat-suitability conditions for a study reach of the Lake Fork. Habitat suitability was evaluated for cutthroat ( Oncorhynchus clarkii ) and brown trout ( Salmo trutta morpha fario ) fry, juveniles, and adults. Microscale (point locations) and mesoscale (reach features) habitats were assessed using the combination of field observations, measurements, and hydraulic simulations within the study reach of the Lake Fork. Microscale trout habitat, presented as weighted usable area, generally increased as streamflow increased for both trout species and all life stages. Areas of suitable microscale habitat occur along the banks for flows of 900 cubic feet per second (ft 3 /s) and less. Out-of-bank areas became more substantial contributors to overall habitat availability for flows of 1,300 ft 3 /s or more when compared to other features. Adult habitat, for both trout species, was the most abundant habitat type for nearly all streamflows. In general, the upper reach provided 2–3 times more available habitat than the lower reach for both trout species. Mesoscale trout habitat of the Lake Fork was assessed based on the conditions present in the 150 ft 3 /s flow simulation as well as field observation. Both the upper and lower reach is primarily characterized as riffle/run habitat. The presence of pool habitat was limited throughout both reaches and occurred along the channel margins. For both reaches, the pool habitat was less than 5 percent of the total wetted area, a percentage that is substantially lower than the recommendations for sustainable populations of 40–70 percent. Areas of cover were adjacent to potential drift feeding areas in the lower reach, and often occurred within the same pool habitat. This may favor energy expenditure ratios of both fish species, wherein little energy is needed to acquire adequate food sources. Sediment mobility is an important process for flushing fine sediments from within the gravel frameworks. Evaluations of channel and flow characteristics at cross-section locations 2–8 show a range of streambed mobility. In general, boundary shear stress and streambed mobility increase with increases in streamflow. Within the cross sections, the greatest boundary shear stress occurs towards the center of the channel. Reach-scale assessment of sediment mobility in the lower reach shows increased streambed mobility. This is due in part to smaller grain sizes in the lower reach, but may also reflect the greater extent of channel alterations, specifically the temporary berms constructed by CDOT in the late 1980s and 1990s, present in this reach.

Colorado↗
USGS2011

Seismic and geodetic signatures of fault slip at the Slumgullion Landslide Natural Laboratory

We tested the hypothesis that the Slumgullion landslide is a useful natural laboratory for observing fault slip, specifically that slip along its basal surface and side-bounding strike-slip faults occurs with comparable richness of aseismic and seismic modes as along crustal- and plate-scale boundaries. Our study provides new constraints on models governing landslide motion. We monitored landslide deformation with temporary deployments of a 29-element prism array surveyed by a robotic theodolite and an 88-station seismic network that complemented permanent extensometers and environmental instrumentation. Aseismic deformation observations show that large blocks of the landslide move steadily at approximately centimeters per day, possibly punctuated by variations of a few millimeters, while localized transient slip episodes of blocks less than a few tens of meters across occur frequently. We recorded a rich variety of seismic signals, nearly all of which originated outside the monitoring network boundaries or from the side-bounding strike-slip faults. The landslide basal surface beneath our seismic network likely slipped almost completely aseismically. Our results provide independent corroboration of previous inferences that dilatant strengthening along sections of the side-bounding strike-slip faults controls the overall landslide motion, acting as seismically radiating brakes that limit acceleration of the aseismically slipping basal surface. Dilatant strengthening has also been invoked in recent models of transient slip and tremor sources along crustal- and plate-scale faults suggesting that the landslide may indeed be a useful natural laboratory for testing predictions of specific mechanisms that control fault slip at all scales.

Colorado↗
USGS1999

Map and description of the active part of the Slumgullion Landslide, Hinsdale County, Colorado

This text accompanies a map of many of the features on the active part of the Slumgullion landslide, Hinsdale County, Colo. Long-term movement creates and destroys a variety of structural features on the surface of the landslide including faults, fractures, and folds, as well as basins and ridges. The Slumgullion landslide consists of a large volume of inactive landslide deposits and a much smaller volume that is actively moving within the deposits of the older landslide. Previously, collapse of the south side of the scarp on Mesa Seco produced materials that blocked the Lake Fork of the Gunnison River and created Lake San Cristobal. The current landslide activity was triggered by a collapse, which apparently extended the preexisting headscarp toward the north. The loading induced by the deposition of the collapsed materials reactivated some of the older landslide deposits. Displacement rates in the active part of the landslide range from about 0.2 m/yr at the uppermost fractures to a maximum of 7.4 m/yr in the narrowest part of the landslide. From this maximum rate, displacement rate declines to 2 or less m/yr at the toe. The interplay between different displacement rates, varying width, and curving boundaries gives rise to the structures within the landslide. For purposes of description, the landslide has been divided into seven zones: head, zone of stretching, the hopper and neck, zone of pull-apart basins, pond deposits and emergent toe, zone of shortening and spreading, and active toe. Each zone has its characteristic kinematic expression that provides information on the internal deformation of the landslide. In general, the upper part of the landslide is characterized by features such as normal faults and tension cracks associated with stretching. The lowermost part of the landslide is characterized by thrust faults and other features associated with shortening. In between, features are a result of widening, bending, or narrowing of the landslide. Also, in places where the slope of the landslide is locally steeper than average, small landslides form on the surface of the larger landslide. On the basis of qualitative observations of changes in the morphology and displacement, we speculate that the landslide is unlikely to accelerate and is more likely to stop movement over a time scale of decades. This speculation is based on the observation that driving forces are gradually diminishing and resisting forces are increasing. Rejuvenation or reactivation probably requires collapse of a new block in the head of the landslide.

Colorado↗
USGS1980

Helicopter airborne electromagnetic survey (using the Dighem II system) of parts of the Lake City caldera, Hinsdale County, Colorado

The data presented herein is from an airborne electromagnetic-resistivity-survey conducted by Dighem Limited of Toronto Canada for the U.S. Geological Survey. The area surveyed is located in the western San Juan Mountains near Lake City, Colorado. The general area covered is between 37°45' and 38° latitude north and 107°15' and 107°35' longitude west. The survey flying was confined to nine valleys which surround the Lake City caldera. Four blocks were surveyed from October 22 to October 27, 1979 for a total of 535 line - kilometers. The survey was flown as part of a mineral appraisal study conducted in cooperation with Bureau of Land Management (BLM). The survey was done to detect massive mineralization, mainly copper, and to locate conductive faults that may be suitable sites for uranium mineralization. To be useful, airborne electromagnetic measurements must be made within a few hundred feet of the surface. The area that was flown is so rugged that a helicopter rather than a fixed-wing aircraft was used. Fraser and Dvorak summarize the data of the survey areas as follows: in the east and south, the ground resistivities varied over a broad range—, from 20 to 1000 ohm-m. The western and northern parts of the area were characterized by resistivities mostly in the 300 to 1000 ohm-m range. Several weak to moderate EM anomalies were located that may warrant ground follow-up work.

Colorado↗