Geology topics

Research about Green Canyon Block 955, Green Knoll, Gulf of Mexico

Source-linked reports with geographic coverage including Green Canyon Block 955, Green Knoll, Gulf of Mexico.

3 recordsLinked to original sources

USGS2022

Compression behavior of hydrate-bearing sediments

This work experimentally explores porosity, compressibility, and the ratio of horizontal to vertical effective stress ( K 0 ) in hydrate-bearing sandy silts from Green Canyon Block 955 in the deep-water Gulf of Mexico. The samples have an in situ porosity of 0.38 to 0.40 and a hydrate saturation of more than 80%. The hydrate-bearing sediments are stiffer than the equivalent hydrate-free sediments; the K 0 stress ratio is greater for hydrate-bearing sediments relative to the equivalent hydrate-free sediments. The porosity decreases by 0.01 to 0.02 when the hydrate is dissociated at the in situ effective stress. We interpret that the hydrate in the sediment pores is a viscoelastic material that behaves like a fluid over experimental time scales, yet it cannot escape the sediment skeleton. During compression, the hydrate bears a significant fraction of the applied vertical load and transfers this load laterally, resulting in the apparent increased stiffness and a larger apparent K 0 stress ratio. When dissociation occurs, the load carried by the hydrate is transferred to the sediment skeleton, resulting in further compaction and a decrease in the lateral stress. The viewpoint that the hydrate is a trapped viscous phase provides a mechanism for how stiffness and stress ratio ( K 0 ) are greater when hydrate is present in the porous media. This study provides insight into the initial stress state of hydrate-bearing reservoirs and the geomechanical evolution of these reservoirs during production.

Louisiana↗

USGS2022

Integrated geochemical approach to determine the source of methane in gas hydrate from Green Canyon Block 955 in the Gulf of Mexico

Massive volumes of gas are sequestered within gas hydrate in subsurface marine sediments in the Gulf of Mexico. Methane associated with gas hydrate is a potentially important economic resource and a significant reservoir of carbon within the global carbon cycle. Nevertheless, uncertainties remain about the genetic source (e.g., microbial, thermogenic) and possible migration history of natural gas incorporated into hydrate. Previous studies have primarily used the hydrocarbon molecular (CH 4 /C 2 H 6 +) and isotopic (δ 13 C-CH 4 , δ 2 H-CH 4 ) compositions of natural gas to address these uncertainties. However, hydrocarbon tracers are altered by mixing, oxidation, secondary methanogenesis, or fluid migration, which presents challenges when deciphering the mechanisms responsible for methane formation and accumulation. To evaluate the genetic source of natural gases from Green Canyon Block 955 (GC 955), east of the Sigsbee escarpment, we collected and analyzed samples from the first pressurized hydrate-bearing sediment cores collected from a coarse-grained hydrate reservoir in the Gulf of Mexico. Gas samples were analyzed for hydrocarbon gas (C 1 –C 5 ), major gas (e.g., N 2 , CO 2 ), and noble gas (He-Xe) abundance and isotopic (e.g., δ 13 C-CH 4 , δ 2 H-CH 4 , δ 13 C-CO 2 , δ 15 N-N 2 , 3 He/ 4 He, 4 He/ 20 Ne) compositions. We determined that natural gas in hydrates from this location are predominantly of primary microbial origin (conservatively at least 76%) and are formed by the hydrogenotrophic (CO 2 reduction) methanogenesis pathway. We also note increased thermogenic proportions (∼6%) in a hydrate-bearing layer below the main hydrate-bearing interval (separated by a 5-m water-bearing layer). Our results suggest that microbial methane may be abundant below the base of gas hydrate stability at GC 955.

Louisiana↗

USGS2022

Permeability of methane hydrate-bearing sandy silts in the deep-water Gulf of Mexico (Green Canyon Block 955)

Permeability is one of the most crucial properties governing fluid flow in methane hydrate reservoirs. This paper presents a comprehensive permeability analysis of hydrate-bearing sandy silt pressure-cored from Green Canyon Block 955 (GC 955) in the deep-water Gulf of Mexico. We developed an experimental protocol to systematically characterize the transport and petrophysical properties in pressure cores. The in situ effective permeability ranges from 0.1 md (1.0 × 10 −16 m 2 ) to 2.4 md (2.4 × 10 −15 m 2 ) in these natural sandy silts cores with hydrate occupying 83%–93% of the pore space. When hydrate dissociates from these cores, the measured intrinsic permeability ( k 0 ) is 0.3 md (3.0 × 10 −16 m 2 ) to 9.3 md (9.3 × 10 −15 m 2 ); these results are affected by fines migration during hydrate dissociation. We analyzed samples reconstituted from these sandy silts and found k 0 to range from ∼12 md (∼1.2 × 10 −14 m 2 ) to ∼41 md (∼4.1 × 10 −14 m 2 ). The water relative permeabilities ( k rw ) of GC 955 pressure cores are large relative to other natural pressure cores from offshore Japan, offshore India, and onshore Alaska. These k rw values are also higher than predicted by current conceptual relative permeability models where hydrate fills the pores or coats the grains of the sediments. This fundamental conundrum requires further study. Our work provides essential parameters to reservoir simulation models seeking to predict hydrate formation in geological systems, evaluate the gas production potential, and explore the best way to produce this energy resource in sandy silt reservoirs.

Louisiana↗