Geology Reports⌕ Search

Geology topics

Research about Germany

Source-linked reports with geographic coverage including Germany.

At least 19 recordsLinked to original sources
USGS2026

Forecasting volcanic activity in Germany—A multi-criteria approach

Igneous activity, including shallow intrusions and volcanism, has the potential to disrupt underground critical infrastructure. Notably, future underground infrastructure projects like high-level radioactive waste repositories must be sited in areas of extremely low disruption probability by igneous activity. In Germany, according to the Repository Site Selection Act of 2017 (Standortauswahlgesetz, or StandAG), areas in which Quaternary volcanism is either present or future volcanic activity is expected within the next 1 million years (m.y.) must be excluded from the site selection process. Although the locations of regions with Quaternary volcanism are reasonably well known in Germany, forecasting potential igneous activity at intraplate volcanic fields is challenging, as many processes and their interactions control the spatial distribution of volcanic centers. Here, a semi-quantitative, multi-criteria approach is proposed for a regional evaluation of the relative potential of future igneous activity in Germany. A variety of geoscientific indicators are used, including seismic anomalies in Earth’s mantle, gravity data, tectonic activity, sutures, ground motion, earthquakes, mantle degassing centers, and geochronological data of volcanic rocks. The indicators describe the sequence of processes from potential melt generation in Earth’s mantle, through ascent and accumulation of melt within the lithosphere, to eruption at Earth’s surface. In total, 15 out of 30 proposed geoscientific indicators are selected and quantified using 20 total assigned parameters. Defined threshold values are used to spatially delimit relevant parameter properties to focus on areas with higher potential of future magmatic activity. To consider uncertainties of parameters and their underlying processes, which are usually more spatially extensive below ground, buffer zones are defined in which values of relevance decrease with increasing distance from the initial lateral shape of a parameter. Normalized parameters are combined into an index, whose spatial value distribution is used to differentiate the relative potential of future igneous activity (within the next 1 m.y.). The sensitivity of the results is shown by varying the weighting factors for the relevant parameters in country-wide index maps. Thereby, profiles illustrate the distribution of the resulting index values and respective index fractions of various parameters. Different index maps for the relative potential of future igneous activity are presented and can be used for hazard assessments.

Professional Paper↗
USGS2022

High-resolution 3D forest structure explains ecomorphological trait variation in assemblages of saproxylic beetles

Climate, topography and the 3D structure of forests are major drivers affecting local species communities. However, little is known about how the specific functional traits of saproxylic (wood-living) beetles, involved in the recycling of wood, might be affected by those environmental characteristics. Here, we combine ecological and morphological traits available for saproxylic beetles and airborne laser scanning (ALS) data in Bayesian trait-based joint species distribution models to study how traits drive the distributions of more than 230 species in temperate forests of Europe. We found that elevation (as a proxy for temperature and precipitation) and the proportion of conifers played important roles in species occurrences while variables related to habitat heterogeneity and forest complexity were less relevant. Furthermore, we showed that local communities were shaped by environmental variation primarily through their ecological traits whereas morphological traits were involved only marginally. As predicted, ecological traits influenced species' responses to forest structure, and to other environmental variation, with canopy niche, wood decay niche and host preference as the most important ecological traits. Conversely, no links between morphological traits and environmental characteristics were observed. Both models, however, revealed strong phylogenetic signal in species' response to environmental characteristics. These findings imply that alterations of climate and tree species composition have the potential to alter saproxylic beetle communities in temperate forests. Additionally, ecological traits help explain species' responses to environmental characteristics and thus should prove useful in predicting their responses to future change. It remains challenging, however, to link simple morphological traits to species' complex ecological niches.

Functional Ecology↗
USGS2020

Quantifying interregional flows of multiple ecosystem services – A case study for Germany

Despite a growing number of national-scale ecosystem service (ES) assessments, few studies consider the impacts of ES use and consumption beyond national or regional boundaries. Interregional ES flows – ecosystem services “imported” from and “exported” to other countries – are rarely analyzed and their importance for global sustainability is little known. Here, we provide a first multi-ES quantification of a nation's use of ES from abroad. We focus on ES flows that benefit the population in Germany but are supplied outside German territory. We employ a conceptual framework recently developed to systematically quantify interregional ES flows. We address four types of interregional ES flows with: (i) biophysical flows of traded goods: cocoa import for consumption; (ii) flows mediated by migratory species: migration of birds providing pest control; (iii) passive biophysical flows: flood control along transboundary watersheds; and (iv) information flows: China's giant panda loan to the Berlin Zoo. We determined that: (i) Ivory Coast and Ghana alone supply around 53% of Germany's cocoa while major negative consequences for biodiversity occurred in Cameroon and Ecuador; (ii) Africa´s humid and sub-humid climate zones are important habitats for the majority of migratory bird species that provide natural pest control services in agricultural areas in Germany; (iii) Upstream watersheds outside the country add an additional 64% flood regulation services nationally, while Germany exports 40% of flood regulation services in neighboring, downstream countries; (iv) Information flows transported by the pandas were mainly related to political aspects and - contrary to our expectations - considerably less on biological and natural aspects. We discuss the implications of these results for international resource management policy and governance.

Global Environmental Change↗
USGS2020

Mixotrophic iron-oxidizing Thiomonas isolates from an acid mine drainage-affected creek

Natural attenuation of heavy metals occurs via coupled microbial iron cycling and metal precipitation in creeks impacted by acid mine drainage (AMD). Here, we describe the isolation, characterization, and genomic sequencing of two iron-oxidizing bacteria (FeOB) species: Thiomonas ferrovorans FB-6 and Thiomonas metallidurans FB-Cd, isolated from slightly acidic (pH 6.3), Fe-rich, AMD-impacted creek sediments. These strains precipitated amorphous iron oxides, lepidocrocite, goethite, and magnetite or maghemite and grew at a pH optimum of 5.5. While Thiomonas spp. are known as mixotrophic sulfur oxidizers and As oxidizers, the FB strains oxidized Fe, which suggests they can efficiently remove Fe and other metals via coprecipitation. Previous evidence for Thiomonas sp. Fe oxidation is largely ambiguous, possibly because of difficulty demonstrating Fe oxidation in heterotrophic/mixotrophic organisms. Therefore, we also conducted a genomic analysis to identify genetic mechanisms of Fe oxidation, other metal transformations, and additional adaptations, comparing the two FB strain genomes with 12 other Thiomonas genomes. The FB strains fall within a relatively novel group of Thiomonas strains that includes another strain (b6) with solid evidence of Fe oxidation. Most Thiomonas isolates, including the FB strains, have the putative iron oxidation gene cyc2 , but only the two FB strains possess the putative Fe oxidase genes mtoAB . The two FB strain genomes contain the highest numbers of strain-specific gene clusters, greatly increasing the known Thiomonas genetic potential. Our results revealed that the FB strains are two distinct novel species of Thiomonas with the genetic potential for bioremediation of AMD via iron oxidation.

Thuringia↗
USGS2014

Identification of Mn(II)-oxidizing bacteria from a low-pH contaminated former uranium mine

Biological Mn oxidation is responsible for producing highly reactive and abundant Mn oxide phases in the environment that can mitigate metal contamination. However, little is known about Mn oxidation in low-pH environments, where metal contamination often is a problem as the result of mining activities. We isolated two Mn(II)-oxidizing bacteria (MOB) at pH 5.5 ( Duganella isolate AB_14 and Albidiferax isolate TB-2) and nine strains at pH 7 from a former uranium mining site. Isolate TB-2 may contribute to Mn oxidation in the acidic Mn-rich subsoil, as a closely related clone represented 16% of the total community. All isolates oxidized Mn over a small pH range, and isolates from low-pH samples only oxidized Mn below pH 6. Two strains with different pH optima differed in their Fe requirements for Mn oxidation, suggesting that Mn oxidation by the strain found at neutral pH was linked to Fe oxidation. Isolates tolerated Ni, Cu, and Cd and produced Mn oxides with similarities to todorokite and birnessite, with the latter being present in subsurface layers where metal enrichment was associated with Mn oxides. This demonstrates that MOB can be involved in the formation of biogenic Mn oxides in both moderately acidic and neutral pH environments.

Applied and Environmental Microbiology↗
USGS2014

Passage of native riverine fishes through geometrically different sections of a vertical slot fishway on the Moselle River, Germany

In order to study effects of different geometric types of pools or change of the flow direction on the passability of fish, sets of PIT antennas were installed inside a modern vertical slot fishway at the mouth of the River Moselle. Fish of 13 abundant species were caught and tagged with PIT tags in 2013 and released in the tailwater of Koblenz. 16% of the tagged fish were detected entering the fishway a short time after release. These individuals provided data on entry and passage rates for different sections of the fishway. Preliminary results show differences in passage time and passage rates between different sections of the fishway.

Moselle River↗
USGS2013

Surprising abundance of Gallionella-related iron oxidizers in creek sediments at pH 4.4 or at high heavy metal concentrations

We identified and quantified abundant iron-oxidizing bacteria (FeOB) at three iron-rich, metal-contaminated creek sites with increasing sediment pH from extremely acidic (R1, pH 2.7), to moderately acidic (R2, pH 4.4), to slightly acidic (R3, pH 6.3) in a former uranium-mining district. The geochemical parameters showed little variations over the 1.5 year study period. The highest metal concentrations found in creek sediments always coincided with the lowest metal concentrations in creek water at the slightly acidic site R3. Sequential extractions of R3 sediment revealed large portions of heavy metals (Ni, Cu, Zn, Pb, U) bound to the iron oxide fraction. Light microscopy of glass slides exposed in creeks detected twisted stalks characteristic of microaerobic FeOB of the family Gallionellaceae at R3 but also at the acidic site R2. Sequences related to FeOB such as Gallionella ferruginea, Sideroxydans sp. CL21, Ferritrophicum radicicola, and Acidovorax sp. BrG1 were identified in the sediments. The highest fraction of clone sequences similar to the acidophilic “Ferrovum myxofaciens” was detected in R1. Quantitative PCR using primer sets specific for Gallionella spp., Sideroxydans spp., and “Ferrovum myxofaciens” revealed that ~72% (R2 sediment) and 37% (R3 sediment) of total bacterial 16S rRNA gene copies could be assigned to groups of FeOB with dominance of microaerobic Gallionella spp. at both sites. Gallionella spp. had similar and very high absolute and relative gene copy numbers in both sediment communities. Thus, Gallionella-like organisms appear to exhibit a greater acid and metal tolerance than shown before. Microaerobic FeOB from R3 creek sediment enriched in newly developed metal gradient tubes tolerated metal concentrations of 35 mM Co, 24 mM Ni, and 1.3 mM Cd, higher than those in sediments. Our results will extend the limited knowledge of FeOB at contaminated, moderately to slightly acidic environments.

Ronneburg↗
USGS2012

Well log-derived estimates of thermal conductivity in crystalline rocks penetrated by the 4-KM deep KTB Vorbohrung

Well log measurements of compressional and shear velocity (V p , V s ), density, and temperature from the 4 km-deep KTB Vorbohrung (pilot hole) were applied in a phonon conduction model for the thermal conductivity of a crystalline solid. The resulting conductivity estimates were compared with conductivities (k LAB ) measured on the nearly continuous (91% recovery) core. Previous studies have shown the log-derived conductivity (k LOG ) to be within ±15% of k LAB in isotropic or flat-lying anisotropic crystalline rocks. The section penetrated by the KTB pilot hole includes both predominantly isotropic metabasites and highly anisotropic gneisses with foliation dips ranging from horizontal to vertical. The predictions of the phonon model were accurate within ±4% in the metabasites but inaccurate by as much as 23% in the gneisses. The accuracy of the model in the metabasites confirms the utility of the phonon conduction approach in isotropic or weakly anisotropic rocks, but the discrepancies in the anisotropic gneisses remain unexplained. These relatively large discrepancies between k LOG and k LAB correspond to depths at which laboratory measurements of V s under in situ conditions deviate from the sonic log V s . This suggests that sonic log determinations of V s may not be reliable in dipping, anisotropic rocks. Alternatively, the laboratory V s measurements may not constitute a representative sample, or there may be errors in the phonon conduction model. If the discrepancies can be tied to errors in sonic log V s measurements, the phonon conduction model may provide a tool for deriving thermal conductivity profiles of the Earth's crust from seismic studies of V p and V s .

Geophysical Research Letters↗
USGS2012

Dendrochemistry of multiple releases of chlorinated solvents at a former industrial site

Trees can take up and assimilate contaminants from the soil, subsurface, and groundwater. Contaminants in the transpiration stream can become bound or incorporated into the annual rings formed in trees of the temperate zones. The chemical analysis of precisely dated tree rings, called dendrochemistry, can be used to interpret past plant interactions with contaminants. This investigation demonstrates that dendrochemistry can be used to generate historical scenarios of past contamination of groundwater by chlorinated solvents at a site in Verl, Germany. Increment cores from trees at the Verl site were collected and analyzed by energy-dispersive X-ray fluorescence (EDXRF) line scanning. The EDXRF profiles showed four to six time periods where tree rings had anomalously high concentrations of chlorine (Cl) as an indicator of potential contamination by chlorinated solvents.

Verl↗
USGS2012

Identifying the decision to be supported: a review of papers from environmental modelling and software

Two of the basic tenets of decision support system efforts are to help identify and structure the decisions to be supported, and to then provide analysis in how those decisions might be best made. One example from wetland management would be that wildlife biologists must decide when to draw down water levels to optimise aquatic invertebrates as food for breeding ducks. Once such a decision is identified, a system or tool to help them make that decision in the face of current and projected climate conditions could be developed. We examined a random sample of 100 papers published from 2001-2011 in Environmental Modelling and Software that used the phrase “decision support system” or “decision support tool”, and which are characteristic of different sectors. In our review, 41% of the systems and tools related to the water resources sector, 34% were related to agriculture, and 22% to the conservation of fish, wildlife, and protected area management. Only 60% of the papers were deemed to be reporting on DSS. This was based on the papers reviewed not having directly identified a specific decision to be supported. We also report on the techniques that were used to identify the decisions, such as formal survey, focus group, expert opinion, or sole judgment of the author(s). The primary underlying modelling system, e.g., expert system, agent based model, Bayesian belief network, geographical information system (GIS), and the like was categorised next. Finally, since decision support typically should target some aspect of unstructured decisions, we subjectively determined to what degree this was the case. In only 23% of the papers reviewed, did the system appear to tackle unstructured decisions. This knowledge should be useful in helping workers in the field develop more effective systems and tools, especially by being exposed to the approaches in different, but related, disciplines. We propose that a standard blueprint for reporting on DSS be developed for consideration by journal editors to aid them in filtering papers that use the term, “decision support”.

Leipzig↗
USGS2011

Phytoscreening for chlorinated solvents using rapid in vitro SPME sampling: Application to urban plume in Verl, Germany

Rapid detection and delineation of contaminants in urban settings is critically important in protecting human health. Cores from trees growing above a plume of contaminated groundwater in Verl, Germany, were collected in 1 day, with subsequent analysis and plume mapping completed over several days. Solid-phase microextraction (SPME) analysis was applied to detect tetrachloroethene (PCE) and trichloroethene (TCE) to below nanogram/liter levels in the transpiration stream of the trees. The tree core concentrations showed a clear areal correlation to the distribution of PCE and TCE in the groundwater. Concentrations in tree cores were lower than the underlying groundwater, as anticipated; however, the tree core water retained the PCE:TCE signature of the underlying groundwater in the urban, populated area. The PCE:TCE ratio can indicate areas of differing degradation activity. Therefore, the phytoscreening analysis was capable not only of mapping the spatial distribution of groundwater contamination but also of delineating zones of potentially differing contaminant sources and degradation. The simplicity of tree coring and the ability to collect a large number of samples in a day with minimal disruption or property damage in the urban setting demonstrates that phytoscreening can be a powerful tool for gaining reconnaissance-level information on groundwater contaminated by chlorinated solvents. The use of SPME decreases the detection level considerably and increases the sensitivity of phytoscreening as an assessment, monitoring, and phytoforensic tool. With rapid, inexpensive, and noninvasive methods of detecting and delineating contaminants underlying homes, as in this case, human health can be better protected through screening of broader areas and with far faster response times.

Environmental Science & Technology↗
USGS2011

Deciphering fluid sources of hydrothermal systems: A combined Sr- and S-isotope study on barite (Schwarzwald, SW Germany)

Primary and secondary barites from hydrothermal mineralizations in SW Germany were investigated, for the first time, by a combination of strontium (Sr) isotope systematics ( 87 Sr/ 86 Sr), Sr contents and δ 34 S values to distinguish fluid sources and precipitation mechanisms responsible for their formation. Barite of Permian age derived its Sr solely from crystalline basement rocks, whereas all younger barite also incorporate Sr from formation waters of the overlying sediments. In fact, most of the Sr in younger barite is leached from Lower and Middle Triassic sediments. In contrast, most of the sulfur (S) of Permian, Jurassic and northern Schwarzwald Miocene barite originated from basement rocks. The S source of Upper Rhinegraben (URG)-related Paleogene barite differs depending on geographic position: for veins of the southern URG, it is the Oligocene evaporitic sequence, while central URG mineralizations derived its S from Middle Triassic evaporites. Using Sr isotopes of barite of known age combined with estimates on the Sr contents and Sr isotopic ratios of the fluids' source rocks, we were able to quantify mixing ratios of basement-derived fluids and sedimentary formation waters for the first time. These calculations show that Jurassic barite formed by mixing of 75–95% ascending basement-derived fluids with 5–25% sedimentary formation water, but that only 20–55% of the Sr was brought by the basement-derived fluid to the depositional site. Miocene barite formed by mixing of an ascending basement-derived brine (60–70%) with 30–40% sedimentary formation waters. In this case, only 8–15% of the Sr was derived from the deep brine. This fluid-mixing calculation is an example for deposits in which the fluid source is known. This method applied to a greater number of deposits formed at different times and in various geological settings may shed light on more general causes of fluid movement in the Earth's crust and on the formation of hydrothermal ore deposits.

Schwarzwald↗
USGS2011

Trace and minor element variations and sulfur isotopes in crystalline and colloform ZnS: Incorporation mechanisms and implications for their genesis

Various models have been proposed to explain the formation mechanism of colloform sphalerite, but the origin is still under debate. In order to decipher influences on trace element incorporation and sulfur isotope composition, crystalline and colloform sphalerite from the carbonate-hosted Mississippi-Valley Type (MVT) deposit near Wiesloch, SW Germany, were investigated and compared to sphalerite samples from 52 hydrothermal vein-type deposits in the Schwarzwald ore district, SW Germany to study the influence of different host rocks, formation mechanisms and fluid origin on trace element incorporation. Trace and minor element incorporation in sphalerite shows some correlation to their host rock and/or origin of fluid, gangue, paragenetic minerals and precipitation mechanisms (e.g., diagenetic processes, fluid cooling or fluid mixing). Furthermore, crystalline sphalerite is generally enriched in elements like Cd, Cu, Sb and Ag compared to colloform sphalerite that mainly incorporates elements like As, Pb and Tl. In addition, sulfur isotopes are characterized by positive values for crystalline and strongly negative values for colloform sphalerite. The combination of trace element contents, typical minerals associated with colloform sphalerite from Wiesloch, sulfur isotopes and thermodynamic considerations helped to evaluate the involvement of sulfate-reducing bacteria in water-filled karst cavities. Sulfate-reducing bacteria cause a sulfide-rich environment that leads in case of a metal-rich fluid supply to a sudden oversaturation of the fluid with respect to galena, sphalerite and pyrite. This, however, exactly coincides with the observed crystallization sequence of samples involving colloform sphalerite from the Wiesloch MVT deposit.

Wiesloch↗
USGS2010

Formation of the Wiesloch Mississippi Valley-type Zn-Pb-Ag deposit in the extensional setting of the Upper Rhinegraben, SW Germany

The Mississippi Valley-type (MVT) Zn–Pb–Ag deposit in the Wiesloch area, Southwest Germany, is controlled by graben-related faults of the Upper Rhinegraben. Mineralization occurs as vein fillings and irregular replacement ore bodies consisting of sphalerite, banded sphalerite, galena, pyrite, sulfosalts (jordanite and geocronite), barite, and calcite in the Middle Triassic carbonate host rock. Combining paragenetic information, fluid inclusion investigations, stable isotope and mineral chemistry with thermodynamic modeling, we have derived a model for the formation of the Wiesloch deposit. This model involves fluid mixing between ascending hot brines (originating in the crystalline basement) with sedimentary formation waters. The ascending brines originally had a near-neutral pH (around 6) and intermediate oxidation state, reflecting equilibrium with granites and gneisses in the basement. During fluid ascent and cooling, the pH of the brine shifted towards more acidic (around 4) and the oxidation state increased to conditions above the hematite-magnetite buffer. These chemical characteristics contrast strongly with those of the pore and fracture fluid residing in the limestone aquifer, which had a pH between 8 and 9 in equilibrium with calcite and was rather reduced due to the presence of organic matter in the limestone. Mixing between these two fluids resulted in a strong decrease in the solubility of silver-bearing sphalerite and galena, and calcite. Besides Wiesloch, several Pb–Zn deposits are known along the Upper Rhinegraben, including hydrothermal vein-type deposits like Badenweiler and the Michael mine near Lahr. They all share the same fluid origin and formation process and only differ in details of their host rock and fluid cooling paths. The mechanism of fluid mixing also seems to be responsible for the formation of other MVT deposits in Europe (e.g., Réocin, Northern Spain; Trèves, Southern France; and Cracow-Silesia, Poland), which show notable similarities in terms of their age, mineralogy. and mineral chemistry to the MVT deposit near Wiesloch.

Mineralium Deposita↗
USGS2002

Late Devonian sea-level changes, catastrophic events, and mass extinctions

Late Devonian history is explained through event stratigraphy comprising a sequence of 18 sea-level changes, catastrophic events, and mass extinctions. Generally rising sea level during the initial Frasnian Stage, beginning with the Taghanic onlap and ending with a sea-level fall and major mass extinction, was interrupted by several exceptionally rapid, very high rises of sea level. These rises may be related to a series of comet showers, as suggested by the coincidence of the Alamo Impact in Nevada and the older Amo¨nau Event in Germany with two of the sea-level rises. The subcritical, off-platform marine Alamo Impact is demonstrated to have produced greatly different effects in deep water from those previously recorded on the carbonate platform. The series of comet showers, most notably those around the Frasnian-Famennian boundary, evidenced by microtektites in widely separated regions, not only produced the late Frasnian mass extinction, but also induced global cooling. This cooling resulted in Southern Hemisphere glaciation. Generally falling sea level during the later Famennian Stage was interrupted by several warmer, interglacial episodes, evidenced by glacio-eustatic rises. Another, less severe mass extinction occurred during an abrupt sea-level fall near the end of the Famennian. This glacio-eustatic fall is interpreted to have resulted from a severe, terminal glacial episode. Interpretation of Late Devonian history suggests that impacts and comet showers coincided with sea-level rises, whereas mass extinctions occurred during, not at the start of, sea-level falls.

GSA Special Papers↗
USGS1998

Fluid-deposited graphitic inclusions in quartz: Comparison between KTB (German Continental Deep-Drilling) core samples and artificially reequilibrated natural inclusions

We used Raman microsampling spectroscopy (RMS) to determine the degree of crystallinity of minute (2–15 μm) graphite inclusions in quartz in two sets of samples: experimentally reequilibrated fluid inclusions in a natural quartz grain and biotite-bearing paragneisses from the KTB deep drillhole in SE Germany. Our sequential reequilibration experiments at 725°C on initially pure CO 2 inclusions in a quartz wafer and the J. Krautheim 1993 experiments at 900–1100°C on organic compounds heated in gold or platinum capsules suggest that, at a given temperature, (1) fluid-deposited graphite will have a lower crystallinity than metamorphosed organic matter and (2) that the crystallinity of fluid-deposited graphite is affected by the composition of the fluid from which it was deposited. We determined that the precipitation of more-crystalline graphite is favored by lower f H 2 (higher f O 2 ), and that the crystallinity of graphite is established by the conditions (including gas fugacities) that pertain as the fluid first reaches graphite saturation. Graphite inclusions within quartz grains in the KTB rocks show a wide range in crystallinity index, reflecting three episodes of carbon entrapment under different metamorphic conditions. Isolated graphite inclusions have the spectral properties of totally ordered, completely crystalline graphite. Such crystallinity suggests that the graphite was incorporated from the surrounding metasedimentary rocks, which underwent metamorphism at upper amphibolite-facies conditions. Much of the fluid-deposited graphite in fluid inclusions, however, shows some spectral disorder. The properties of that graphite resemble those of experimental precipitates at temperatures in excess of 700°C and at elevated pressures, suggesting that the inclusions represent precipitates from C-O-H fluids trapped under conditions near those of peak metamorphism at the KTB site. In contrast, graphite that is intimately associated with chlorite and other (presumably low-temperature) silicates in inclusions is highly disordered and spectrally resembles kerogens. This graphite probably was deposited during later greenschist-facies retrograde metamorphism at about 400–500°C. The degree of crystallinity of fluid-deposited graphite is shown to be a much more complex function of temperature than is the crystallinity of metamorphic graphite. To some extent, experiments can provide temperature-calibration of the crystallinity index. However, the difference in time scales between experimental runs and geologic processes makes it difficult to infer specific temperatures for naturally precipitated graphite.

Bohemian Massif↗
USGS1989

Field measurements of dry deposition to spruce foliage and petri dishes in the Black Forest, F.R.G.

Dry deposition fluxes of Ca 2+ , Mg 2+ , K + , Mn 2+ , Pb 2+ and SO 2− 4 to spruce foliage and petri dishes were measured in two high-elevation sites ( > 900 m) in the southern Black Forest, F.R.G., during 12 periods (2–7 days, each) from mid-September to mid-November, 1983, In situ extraction of deposited material from small spruce branches allowed repeated use of the same foliar collecting surfaces for a direct comparison of deposition between periods. Fluxes were corrected for leaching of internally cycled constituents using factors determined from serial extraction experiments. The ratio of flux to petri dishes vs foliage ( P F "> PF ) was > 1.0 for Ca 2+ , Pb 2+ and SO 2− 4 , and somewhat < 1.0 but more constant for Mg 2+ . Temporal variations in dry deposition fluxes at an exposed site near the industrialized Rhine Valley correlated with variations in total air particulate concentrations at a nearby air quality station. Deposition rates were comparable in magnitude but different in temporal pattern at a remote site in the Black Forest interior. Fluxes at each site reached a minimum during the period of 4–9 November when a regional air inversion confined pollutants to the Rhine Valley below the study sites. High fluxes accompanied the inversion break-up.

Black Forest↗