Geology topics

Research about Cascade Range

Source-linked reports with geographic coverage including Cascade Range.

At least 19 recordsLinked to original sources

USGS2023

The severity of the 2014–2015 snow drought in the Oregon Cascades in a multicentury context

The western United States (US) is a hotspot for snow drought. The Oregon Cascade Range is highly sensitive to warming and as a result has experienced the largest mountain snowpack losses in the western US since the mid-20th century, including a record-breaking snow drought in 2014–2015 that culminated in a state of emergency. While Oregon Cascade snowpacks serve as the state's primary water supply, short instrumental records limit water managers' ability to fully constrain long-term natural snowpack variability prior to the influence of ongoing and projected anthropogenic climate change. Here, we use annually-resolved tree-ring records to develop the first multi-century reconstruction of Oregon Cascade April 1st Snow Water Equivalent (SWE). The model explains 58% of observed snowpack variability and extends back to 1688 AD, nearly quintupling the length of the existing snowpack record. Our reconstruction suggests that only one other multiyear event in the last three centuries was as severe as the 2014–2015 snow drought. The 2015 event alone was more severe than nearly any other year in over three centuries. Extreme low-to-high snowpack “whiplash” transitions are a consistent feature throughout the reconstructed record. Multi-decadal intervals of persistent below-the-mean peak SWE are prominent features of pre-instrumental snowpack variability, but are generally absent from the instrumental period and likely not fully accounted for in modern water management. In the face of projected snow drought intensification and warming, our findings motivate adaptive management strategies that address declining snowpack and increasingly variable precipitation regimes.

Oregon↗

USGS2021

An updated assessment of status and trend in the distribution of the Cascades frog (Rana cascadae) in Oregon, USA

Conservation efforts need reliable information concerning the status of a species and their trends to help identify which species are in most need of assistance. We completed a comparative evaluation of the occurrence of breeding for Cascades Frog ( Rana cascadae ), an amphibian that is being considered for federal protection under the U.S. Endangered Species Act. Specifically, in 2018–2019 we resurveyed 67 sites that were surveyed approximately 15 y prior and fit occupancy models to quantify the distribution of R. cascadae breeding in the Cascade Range, Oregon, USA. Furthermore, we conducted a simulation exercise to assess the power of sampling designs to detect declines in R. cascadae breeding at these sites. Our analysis of field data combined with our simulation results suggests that if there was a decline in the proportion of sites used for R. cascadae breeding in Oregon, it was likely a < 20% decline across our study period. Our results confirm that while R. cascadae detection probabilities are high, methods that allow the sampling process to be explicitly modeled are necessary to reliably track the status of the species. This study demonstrates the usefulness of investing in baseline information and data quality standards to increase capacity to make similar comparisons for other species in a timeframe that meet the needs of land managers and policy makers.

Oregon↗

USGS2018

Combining multiphase groundwater flow and slope stability models to assess stratovolcano flank collapse in the Cascade Range

Hydrothermal alteration can create low‐permeability zones, potentially resulting in elevated pore‐fluid pressures, within a volcanic edifice. Strength reduction by rock alteration and high pore‐fluid pressures have been suggested as a mechanism for edifice flank instability. Here we combine numerical models of multiphase heat transport and groundwater flow with a slope‐stability code that incorporates three‐dimensional distributions of strength and pore‐water pressure to address the following questions: (1) What permeability distributions and contrasts produce elevated pore‐fluid pressures in a stratovolcano? (2) What are the effects of these elevated pressures on flank stability? (3) Finally, what are the effects of magma intrusion on potential flank failure in an edifice? Simulation results show that under a range of plausible parameters, water tables in a stratovolcano can be elevated or perched. These elevated water tables result in universally lower stability (lower factor of safety) compared with equivalent dry edifices, indicating a higher likelihood of flank collapse. Low‐permeability (<1 × 10 −17 m 2 ) layers such as altered pyroclastic deposits or breccias can result in locally saturated regions (perched water) and lower factors of safety near the ground surface but may actually reduce liquid water saturation and pore pressures in the core of the edifice and thus may favor small, shallow collapses over larger, deeper collapses. Magma intrusion into the base of the edifice increases pore‐fluid pressures and decreases the factor of safety. However, the shear strength of edifice rocks also exerts a significant control on stability, so both mechanical properties and pore‐fluid pressures are important for stability assessments.

Washington↗

USGS2017

Field-trip guide to mafic volcanism of the Cascade Range in Central Oregon—A volcanic, tectonic, hydrologic, and geomorphic journey

The Cascade Range in central Oregon has been shaped by tectonics, volcanism, and hydrology, as well as geomorphic forces that include glaciations. As a result of the rich interplay between these forces, mafic volcanism here can have surprising manifestations, which include relatively large tephra footprints and extensive lava flows, as well as water shortages, transportation and agricultural disruption, and forest fires. Although the focus of this multidisciplinary field trip will be on mafic volcanism, we will also look at the hydrology, geomorphology, and ecology of the area, and we will examine how these elements both influence and are influenced by mafic volcanism. We will see mafic volcanic rocks at the Sand Mountain volcanic field and in the Santiam Pass area, at McKenzie Pass, and in the southern Bend region. In addition, this field trip will occur during a total solar eclipse, the first one visible in the United States in more than 25 years (and the first seen in the conterminous United States in more than 37 years). The Cascade Range is the result of subduction of the Juan de Fuca plate underneath the North American plate. This north-south-trending volcanic mountain range is immediately downwind of the Pacific Ocean, a huge source of moisture. As moisture is blown eastward from the Pacific on prevailing winds, it encounters the Cascade Range in Oregon, and the resulting orographic lift and corresponding rain shadow is one of the strongest precipitation gradients in the conterminous United States. We will see how the products of the volcanoes in the central Oregon Cascades have had a profound influence on groundwater flow and, thus, on the distribution of Pacific moisture. We will also see the influence that mafic volcanism has had on landscape evolution, vegetation development, and general hydrology.

Oregon↗

USGS2017

Oxygen isotope geochemistry of mafic phenocrysts in primitive mafic lavas from the southernmost Cascade Range, California

Previously reported whole-rock δ 18 O values (5.6–7.8‰) for primitive quaternary mafic lavas from the southernmost Cascades (SMC) are often elevated (up to 1‰) relative to δ 18 O values expected for mafic magmas in equilibrium with mantle peridotite. Olivine, clinopyroxene, and plagioclase crystals were separated from 29 geochemically well-characterized mafic lavas for δ 18 O measurements by laser fluorination to assess modification of the mantle sources by ancient and modern subducted components. Oxygen isotope values of olivine phenocrysts in calc-alkaline lavas and contemporaneous high alumina olivine tholeiitic (HAOT) lavas generally exceed depleted mantle olivine values (~4.9–5.3‰). Modern addition of up to 6 wt% slab-derived fluid from Gorda serpentinized peridotite dehydration (~15‰) or chlorite dehydration (~10‰) within the serpentinized peridotite can provide the 18 O enrichment detected in olivine phenocrysts (δ 18 O olivine = 5.3–6.3‰) in calc-alkaline mafic lavas, and elevate 18 O in overlying mantle lithosphere, as well. Specifically, although HAOT δ 18 O olivine values (5.5–5.7‰) may reflect partial melting in heterogeneous 18 O enriched mantle source domains that developed during multiple subduction events associated with terrane accretion (e.g., <1 wt% of ~15‰ materials), an additional 18 O enrichment of up to 2 wt% of 10–15‰ slab-derived hydrous fluids might be accommodated. The calc-alkaline primitive magmas appear to have experienced a continuous range of open system processes, which operate in the mantle and during rapid magma ascent to eruption, and occasionally post quench. Textural relationships and geochemistry of these lava samples are consistent with blends of mafic phenocrysts and degassed melts in varying states of 18 O disequilibrium. In lenses of accumulated melt within peridotite near the base of the crust, coexisting olivine and clinopyroxene δ 18 O values probably are not at isotopic equilibrium because fluids introduced into the system perturbed the δ 18 O melt values. A “sudden” melt extraction event interrupts 18 O equilibration in phenocrysts and poorly mixed melt(s). Rapid ascent of volatile oversaturated primitive mafic magma through the crust appears to be accompanied by devolatilization and crystallization of anorthite-rich plagioclase with elevated δ 18 O plag values. The (Sr/P) N values for the whole rock geochemistry are consistent with a 87 Sr/ 86 Sr ~0.7027 slab-derived fluid addition into the infertile peridotite source of magmas, and melt devolatilization is recorded in the mixture of disequilibrium δ 18 O values for the constituent phases of lavas. Morbidity of the Gorda Plate as it undergoes intense deformation from the spreading ridge to the trench is likely a key factor to developing the carrying capacity of hydrous fluids and mineral phases in the slab subducting into the SMC mantle.

California↗

USGS2015

Geologic and geomorphic controls on the occurrence of fens in the Oregon Cascades and implications for vulnerability and conservation

Montane fens are biologically diverse peat-forming wetlands that develop at points of groundwater discharge. To protect these ecosystems, it is critical to understand their locations on the landscape and the hydrogeologic systems that support them. The upper Deschutes Basin has a groundwater flow system that supports baseflow in many rivers, but little is known about the wetland types and groundwater dependence of the thousands of wetlands within the watershed. In 292 randomly selected wetlands, we quantified landscape metrics thought useful for discriminating montane fens from non-peat-forming wetlands. We inspected these wetlands and classified 67 of them as fens. Of the landscape metrics, only geology reliably differentiated fens from other types of wetlands. Nearly all fens develop in low-permeability glacial till found at approximately 1400–1800 m in elevation, and are concentrated in areas mantled by pumice deposits that originated primarily from the eruption of Mt. Mazama approximately 7700 years BP. Stratigraphic and hydrologic factors indicate the fens are supplied by perched aquifers in glacial till, instead of the deeper regional aquifer system. Their hydrogeologic setting makes the fens highly vulnerable to expected changes to recharge associated with climate change, but not to groundwater pumping from the regional aquifer.

Oregon↗

USGS2015

Tracing chlorine sources of thermal and mineral springs along and across the Cascade Range using halogen and chlorine isotope compositions

In order to provide constraints on the sources of chlorine in spring waters associated with arc volcanism, the major/minor element concentrations and stable isotope compositions of chlorine, oxygen, and hydrogen were measured in 28 thermal and mineral springs along the Cascade Range in northwestern USA. Chloride concentrations in the springs range from 64 to 19,000 mg/L and View the MathML source values range from +0.2&permil; to +1.9&permil; (average=+1.0±0.4&permil;), with no systematic variation along or across the arc, nor correlations with their presumed underlying basement lithologies. Additionally, nine geochemically well-characterized lavas from across the Mt. St. Helens/Mt. Adams region of the Cascade Range (Leeman et al., 2004 and Leeman et al., 2005) were analyzed for their halogen concentrations and Cl isotope compositions. In the arc lavas, Cl and Br concentrations from the volcanic front are higher than in lavas from the forearc and backarc. F and I concentrations progressively decrease from forearc to backarc, similar to the trend documented for B in most arcs. View the MathML source values of the lavas range from −0.1 to +0.8&permil; (average = +0.4±0.3&permil;). Our results suggest that the predominantly positive View the MathML source values observed in the springs are consistent with water interaction with underlying 37Cl-enriched basalt and/or altered oceanic crust, thereby making thermal spring waters a reasonable proxy for the Cl isotope compositions of associated volcanic rocks in the Cascades. However, waters with View the MathML source values >+1.0&permil; also suggest additional contributions of chlorine degassed from cooling magmas due to subsurface vapor–liquid HCl fractionation in which Cl is lost to the aqueous fluid phase and 37Cl is concentrated in the ascending magmatic HCl vapor. Future work is necessary to better constrain Cl isotope behavior during volcanic degassing and fluid–rock interaction in order to improve volatile flux estimates through subduction zones.

Cascade Range↗

USGS2014

Hydrothermal monitoring in a quiescent volcanic arc: Cascade Range, northwestern United States

Ongoing (1996–present) volcanic unrest near South Sister, Oregon, is accompanied by a striking set of hydrothermal anomalies, including elevated temperatures, elevated major ion concentrations, and 3 He/ 4 He ratios as large as 8.6 R A in slightly thermal springs. These observations prompted the US Geological Survey to begin a systematic hydrothermal-monitoring effort encompassing 25 sites and 10 of the highest-risk volcanoes in the Cascade volcanic arc, from Mount Baker near the Canadian border to Lassen Peak in northern California. A concerted effort was made to develop hourly, multiyear records of temperature and/or hydrothermal solute flux, suitable for retrospective comparison with other continuous geophysical monitoring data. Targets included summit fumarole groups and springs/streams that show clear evidence of magmatic influence in the form of high 3 He/ 4 He ratios and/or anomalous fluxes of magmatic CO 2 or heat. As of 2009–2012, summit fumarole temperatures in the Cascade Range were generally near or below the local pure water boiling point; the maximum observed superheat was <2.5°C at Mount Baker. Variability in ground temperature records from the summit fumarole sites is temperature-dependent, with the hottest sites tending to show less variability. Seasonal variability in the hydrothermal solute flux from magmatically influenced springs varied from essentially undetectable to a factor of 5–10. This range of observed behavior owes mainly to the local climate regime, with strongly snowmelt-influenced springs and streams exhibiting more variability. As of the end of the 2012 field season, there had been 87 occurrences of local seismic energy densities approximately ≥ 0.001 J/m 3 during periods of hourly record. Hydrothermal responses to these small seismic stimuli were generally undetectable or ambiguous. Evaluation of multiyear to multidecadal trends indicates that whereas the hydrothermal system at Mount St. Helens is still fast-evolving in response to the 1980–present eruptive cycle, there is no clear evidence of ongoing long-term trends in hydrothermal activity at other Cascade Range volcanoes that have been active or restless during the past century (Baker, South Sister, and Lassen). Experience gained during the Cascade Range hydrothermal-monitoring experiment informs ongoing efforts to capture entire unrest cycles at more active but generally less accessible volcanoes such as those in the Aleutian arc.

California;Oregon;Washington↗

USGS2014

Database for the geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

This geospatial database for a geologic map of the Cascades Range in Washington state is one of a series of maps that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units. Geologic maps of the Eocene to Holocene Cascade Range in California and Oregon complete the series, providing a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanantion. The complete series will be useful for regional studies of volcanic hazards, volcanology, and tectonics. Originally a project supported by the Geothermal Research Program of the U.S. Geological Survey, the maps emphasize Quaternary volcanic rocks, because large igneous-related hydrothermal systems that have high temperatures are associated with Quaternary volcanic fields. Rocks older than a few million years are also included on the maps as they help to unravel geologic puzzles of the present-day Cascade Range. The deeply eroded older volcanoes found in the Western Cascades physiographic subprovince are analogues of today's snow-covered shield volcanoes and stratovolcanoes. The fossil hydrothermal systems of the Eocene to Pliocene vents now exposed provide clues to processes active today beneath the Pleistocene and Holocene volcanic peaks along the present-day crest of the Cascade Range. Study of these older rocks can aid in developing models of geothermal systems. These rocks also give insight into the origins of volcanic-hosted mineral deposits and even to future volcanic hazards. This digital database contains information used to produce the geologic map published as Sheet 1 in U.S. Geological Survey Miscellaneous Investigations Series Map I-2005. (Sheet 2 of Map I-2005 shows sources of geologic data used in the compilation and is available separately). Sheet 1 of Map I-2005 shows the distribution and relations of volcanic and related rock units in the Cascade Range of Washington at a scale of 1:500,000. This digital release is produced from stable materials originally compiled at 1:250,000 scale that were used to publish Sheet 1. The database therefore contains more detailed geologic information than is portrayed on Sheet 1. This is most noticeable in the database as expanded polygons of surficial units and the presence of additional strands of concealed faults. No stable compilation materials exist for Sheet 1 at 1:500,000 scale. The main component of this digital release is a spatial database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map sheet, main report text, and accompanying mapping reference sheet from Map I-2005. For more information on volcanoes in the Cascade Range in Washington, Oregon, or California, please refer to the U.S. Geological Survey Volcano Hazards Program website.

Washington↗

USGS2013

Washington's volcanoes: Know your sleeping giants

Northwest hikers frequently hand down rich traditions of favorite trails to younger generations. While these multi-generational traditions provide the illusion of landscape permanence, observant hikers often witness geologic change in progress—rockfall, water erosion, and glacier change. You might recognize that your views of mountain landscapes are a little bit different from the views of your grandparents, and what you see will likely be different from what your own grandchildren will eventually see.

California, Oregon, Washington↗

USGS2012

Tectonics and conductivity structures in the Southern Washington Cascades

The tectonic setting of the southern Washington Cascades has been studied with the aid of magnetotelluric (MT) and other geophysical data. The main feature of interest in the geophysical data is a broad high-conductivity anomaly mapped with MT and geomagnetic variation (GMV) data. This anomaly is located roughly within the triangle formed by the volcanoes Mount Rainier, Mount St. Helens, and Mount Adams but exceeds beyond Mount Rainier to the northwest. We interpret the cause of the anomaly to be conductive rocks with resistivities of 1–4 ohm m and thicknesses possibly greater than 15 km. These conductive rocks are found 2–8 km beneath the overlying less conductive volcanic and sedimentary rocks at the surface. Two aeromagnetic lows follow the trend of the conductivity anomaly, and linear belts of strike-slip seismicity are coincident with both these magnetic lows. One of the aeromagnetic lows is coincident with the western margin of the conductivity anomaly. The geophysical data appear to outline a suture zone of probable Eocene age caused by accretion of a large seamount complex (Siletzia) and that may contain large thicknesses of compressed forearc basin and accretionary prism sedimentary rocks of Cretaceous to Eocene age. Part of the shallower conductive rocks may be associated with carbonaceous continental and transitional marine sedimentary rocks of the Puget Group. The contact between the hypothesized compressed basin and the accreted terranes to the west may localize the release of shear stresses in this region of oblique subduction. Several possible explanations for the conductivity anomaly are considered in addition to the compressed basin hypothesis.

Washington↗

USGS2012

Analysis of gravity data in volcanic terrain and gravity anomalies and subvolcanic intrusions in the Cascade Range, U.S.A., and at other selected volcanoes

Gravity data were investigated to reveal the presence of subvolcanic intrusions. With few exceptions, these intrusions produce a detectable gravity anomaly. In the past, these gravity anomalies have often been overlooked or misinterpreted because the data reduction procedure was inadequate. A pragmatic method for reducing and interpreting reconnaissance gravity data from volcanoes as well as gravity models of a variety of volcanoes is developed. Large calderas (diameters greater than 15 km) have relatively low-density intrusions beneath them. All other large volcanic systems that would include small calderas (diameters less than 15 km) have relatively high-density intrusions beneath them. The density contrasts that produce the observed anomalies occur between the intrusion, whose density is usually greater than 2.6 g/cm 3 , and the country rock. Commonly, the shallow country rock is an older volcanic layer with a density less than 2.5 g/cm 3 . The result of the contrast is a positive anomaly over the intrusion. For larger calderas, the surrounding volcanic layer is usually thin and overlies dense metamorphic and plutonic country rocks. In this case, we find the intrusion commonly less dense than country rock. The result is a negative anomaly. In modeling volcanoes of the Cascade Range, gravity data and geologic considerations required a bottom on the intrusion. This may be an actual bottom or the depth at which the density contrast between the intrusion and the country rock disappears. The tops of the intrusions are usually shallow and are significantly wider than overlying craters or calderas. Calderas are associated with wider intrusions. Some intrusions are single cooling units, but more commonly they are an accumulation of the unerupted portions of individual magmatic injections. These injections could occur periodically throughout the life of the volcano, and would generally be accompanied by eruption. Comparing the volume of the intrusion and the volume of the volcanic edifice indicates that only a small part of a magma injection erupts, although some of the apparent intrusive material may be reworked older volcanics. Exceptions to the general discussion presented tend to be related to the nature of the country rock.

California, Oregon, Washington↗

USGS2008

Eruptions in the Cascade Range during the past 4,000 years

Volcanoes have been erupting in the Cascade Range for over 500,000 years. During the past 4,000 years eruptions have occurred at an average rate of about 2 per century. This chart shows 13 volcanoes on a map of Washington, Oregon, and northern California and time lines for each showing the ages of their eruptions.

California, Oregon, Washington↗

USGS2005

Systematics of halogen elements and their radioisotopes in thermal springs of the Cascade Range, Central Oregon, Western USA

This study quantifies the cycling of halogen elements through the Cascadia subduction zone based on the chemistry of thermal springs in the Central Oregon Cascade Range and of a mineral spring in the forearc (Willamette Valley). Considerations based on mass balances, element ratios, and 36 Cl/Cl and 129 I/I ratios suggest that halogens discharged through the thermal springs in the Cascade Range are probably derived from magma degassing. Our results indicate that < 35% of the subducted Cl and < 20% of the subducted Br and I could be transported through arc volcanism and the thermal springs, a considerably lower percentage than estimated for other volcanic arcs along the Pacific Rim. A likely explanation for this difference is that a large fraction of the halogens is released from the slab at shallow depths into the serpentinized sub-forearc mantle because of the relatively high temperatures in the subducting Juan de Fuca plate. The small fraction of halogens subducted to depth probably also indicates a low rate of water transport, which is consistent with the observation that the Cascade Range sub-arc mantle is relatively dry and has a low degree of volcanic vigor, compared with other arcs.

Oregon↗

USGS2003

Excess nitrogen in selected thermal and mineral springs of the Cascade Range in northern California, Oregon, and Washington: Sedimentary or volcanic in origin?

Anomalous N 2 /Ar values occur in many thermal springs and mineral springs, some volcanic fumaroles, and at least one acid-sulfate spring of the Cascade Range. Our data show that N 2 /Ar values are as high as 300 in gas from some of the hot springs, as high as 1650 in gas from some of the mineral springs, and as high as 2400 in gas from the acid-sulfate spring on Mt. Shasta. In contrast, gas discharging from hot springs that contain nitrogen and argon solely of atmospheric origin typically exhibits N 2 /Ar values of 40–80, depending on the spring temperature. If the excess nitrogen in the thermal and mineral springs is of sedimentary origin then the geothermal potential of the area must be small, but if the nitrogen is of volcanic origin then the geothermal potential must be very large. End-member excess nitrogen (δ 15 N) is +5.3‰ for the thermal waters of the Oregon Cascades but is only about +1‰ for fumaroles on Mt. Hood and the acid-sulfate spring on Mt. Shasta. Dissolved nitrogen concentrations are highest for thermal springs associated with aquifers between 120 and 140°C. Chloride is the major anion in most of the nitrogen-rich springs of the Cascade Range, and N 2 /Ar values generally increase as chloride concentrations increase. Chloride and excess nitrogen in the thermal waters of the Oregon Cascades probably originate in an early Tertiary marine formation that has been buried by the late Tertiary and Quaternary lava flows of the High Cascades. The widespread distribution of excess nitrogen that has been generated in low to moderate-temperature sedimentary environments is further proof of the restricted geothermal potential of the Cascade Range.

Cascade Range↗

USGS1997

Living with volcanic risk in the Cascades

The Cascade Range of the Pacific Northwest has more than a dozen potentially active volcanoes. Cascade volcanoes tend to erupt explosively, and on average two eruptions occur per century—the most recent were at Mount St. Helens, Washington (1980–86 and 2004–8), and Lassen Peak, California (1914–17). To help protect the Pacific Northwest’s rapidly expanding population, USGS scientists at the Cascades Volcano Observatory in Vancouver, Washington, monitor and assess the hazards posed by the region’s volcanoes.

California, Oregon, Washington↗

USGS1994

Hydrothermal systems of the Cascade Range, north-central Oregon

Quaternary volcanoes of the Cascade Range form a 1,200- kilometer-long arc that extends from southern British Columbia to northern California. The section of the Cascade Range volcanic arc in central Oregon is characterized by relatively high Quaternary volcanic extrusion rates and hot-spring discharge rates. Stableisotope data and measurements of hot-spring heat discharge indicate that gravity-driven thermal fluid circulation transports about 1 MW (megawatt) of heat per kilometer of arc length from the Quaternary arc into Western Cascade rocks older than about 7 Ma (millions of years before present). Inferred flow-path lengths for the Na-Ca-Cl thermal waters of the Western Cascades are 10 to 40 kilometers (km), and an average topographic gradient as large as 0.1 separates the inferred recharge areas from the hot-spring groups. Thermal-fluid residence times are probably 10 2 to 10 4 years: sulfate-water isotopic equilibrium indicates residence times of more than 10 2 years, and our interpretation of stable-isotope data implies residence times of less than 10 4 years.

Oregon↗

USGS1993

Geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

Since 1979 the Geothermal Research Program of the U.S. Geological Survey has carried out a multidisciplinary research effort in the Cascade Range. The goal of this research is to understand the geology, tectonics, and hydrology of the Cascades in order to characterize and quantify geothermal resource potential. A major goal of the program is compilation of a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanation. This map is one of a series presently being compiled that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units; map sheets of the Cascade Range in California and in Oregon complete the series. The complete series forms a guide to exploration and evaluation of the geothermal resources of the Cascade Range and will be useful for studies of volcanic hazards, volcanology, and tectonics. For geothermal reasons, the maps emphasize Quaternary volcanic rocks. Large igneous-related geothermal systems that have high temperatures are associated with Quaternary volcanic fields, and geothermal potential declines rapidly as age increases (Smith and Shaw, 1975). Most high-grade recoverable geothermal energy is likely to be associated with silicic volcanism less than 1 Ma. Lower grade (= lower temperature) geothermal resources may be associated with somewhat older rocks; however, volcanic rocks older than about 2 Ma are unlikely geothermal targets (Smith and Shaw, 1975).

Washington↗