“Leaky weirs” capture alluvial deposition and enhance seasonal mountain-front recharge in dryland streams
“Leaky weirs” are rock structures installed in dryland streams, which are anchored into exposed bedrock, loosely cemented, and designed to allow water to slowly pass through. They are being tested at a ranch in southeastern Arizona, USA, to restore and conserve the historic range and desert wetlands. Data are collected to assess how leaky weirs impact surface water, subsurface water, and groundwater recharge—including stream discharge, timing, and depth of infiltration, and groundwater elevations. Three adjacent watersheds, two with outlets just below leaky weirs and one with leaky weirs farther upstream, were instrumented with water-level loggers, wildlife cameras, and crest stage instruments with temperature sensors in the soil. As most groundwater recharge is assumed to be focused along the mountain fronts in this region, mountain-block recharge is also evaluated to differentiate between the two using isotope analyses. Finally, a single, late-season flood event is scrutinized to consider the leaky weir effect on all monitored components in the water budget. Results indicated groundwater flow is primarily from the mountains to the east via older, regional mountain-block recharge. However, the development of shallow alluvial aquifers is supported by the leaky weirs, that slow flows, capture permeable sediments, and allow infiltration, thus enhancing mountain-front recharge. In turn, these new pockets of water help support the restoration of historic wetlands. Sediment accumulates where leaky weirs are installed, reducing flashy peak flows, and resulting in a series of infiltration ponds along the channel that support vegetation during growing seasons and recharge the shallow aquifer during non-growing seasons.