Geology Reports⌕ Search

place

United STates

United STates: explore 1092 source-linked works published from 1918 to 2026, with original documents and citations.

This collection is a preview while coverage and quality are evaluated.

Search within this collection

Coverage and selection

Includes records with this source-supplied label or an explicit phrase match in their metadata. Matches indicate a mention, not proof that a paper uses a method or tests a material. Source versions are consolidated by DOI.

Sources: usgs. Collection updated 2026-09-14. Counts describe this index, not the complete source archives.

USGS2024

Event classification, seismicity, and eruption forecasting at Great Sitkin Volcano, Alaska: 1999–2023

The frequency content of volcanogenic seismicity is often used to classify events and their spatial and temporal progression is then used to map subsurface volcanic processes. The progression of volcano-seismic events and associated source processes also plays a critical role in eruption forecasting. Here we develop and evaluate a computerized methodology for characterizing volcano-seismic event types using Frequency Index and Average Peak Frequency. We apply and test this technique at Great Sitkin Volcano, Alaska, classifying over 9000 hypocenters between 1999 and 2023. This 24-year time span covers periods of seismic quiescence, earthquake activity on nearby tectonic (bookshelf) faults, precursory unrest from 2016 to 2021, and the explosive onset in May 2021 of the ongoing effusive eruption. We use the spatial and temporal evolution of classified event types to map the active volcanic and tectonic processes, develop a conceptual model of the subsurface magmatic system, and perform a retrospective analysis of eruption forecasts at Great Sitkin Volcano between 2016 and the present. The classification and progression of hypocenters suggests the subsurface Great Sitkin Volcano magmatic system consists of a mid- to lower- crustal source zone between 10 and 40 km depth and an upper crustal magma storage area between −1 and 10 km depth (hypocenter depth is referenced to sea level and negative depths reflect height above sea level). The earliest precursors occurred in July 2016 and consisted of deep long-period and volcano-tectonic earthquakes at mid-crustal depths suggesting the subsequent unrest and eruption were triggered by a deeper intrusion of magma. This mid-crustal seismic activity was immediately followed by the onset upper-crustal long-period events and volcano-tectonic earthquakes VTs suggesting a strong linkage between the shallow and deeper portions of the magmatic system. The upper crustal area was likely capped by the 1974 lava dome until the magmatic explosion on May 26, 2021.

Alaska↗
USGS2024

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado↗
USGS2024

Indications of preferential groundwater seepage feeding northern peatland pools

Groundwater seepage from underlying permeable glacial sedimentary structures, such as eskers, has been hypothesized to directly feed pools in northern peat bogs. These hypotheses directly contradict classical peat bog models for ombrogenous systems, wherein meteoric water is the sole water input to these systems. Variations in the underlying mineral sediment in contact with the peat imply that unrecognized hydrogeologic connectivity may exist with pools in northern peat bogs, particularly where high permeability materials are in contact with the peat. Seepage dynamics originating from these structural variations were investigated using a suite of thermal and hydrogeophysical methods deployed around pools in a peat bog of northeastern Maine, USA. Thermal characterization methods mapped anomalies that were confirmed as matrix seepage or preferential flow pathways (PFPs). Geochemical methods were employed at identified thermal anomalies to confirm upwelling of solute-rich groundwater. Conduits around pools were associated with surficial terminations of suspected peat pipes, based on the inference of pathways extending down into the peat, that focus flow through PFPs in the peat matrix. Discharge also occurred through the peat matrix adjacent to suspected pipe structures and matrix seepage rates were quantified using analysis of diurnal temperature signals recorded at multiple depths. Seepage rates, with a maximum of nearly 0.4 m/d, were measured at localized points around pools. Periods of synchronized temperatures paired with highly muted diurnal temperature signals, recorded in diurnal temperature with depth data, were interpreted qualitatively as activation of strong upward discharge rates through suspected peat pipes. These time periods correlated strongly with local precipitation events around the peatland. Ground-penetrating radar surveys revealed discontinuities in the low permeability glacio-marine clay at the mineral sediment-peat interface, interpreted to be regional glacial esker deposits, which were located beneath and around pools. Heat tracing, specific conductance contrasts, seepage rates, and trace metal concentrations all imply groundwater seepage originating from underlying permeable glacial esker deposits and directly sourcing pools. Preferential groundwater inputs into northern peat bogs may play a key role in developing and maintaining pool systems, with enhanced solute transport impacting peatland ecology, water resources, and carbon cycling.

Maine↗
USGS2024

Produced water geochemistry from hydraulically stimulated Niobrara Formation petroleum wells: Origin of salinity and temporal perspectives on treatment and reuse

Produced water (i.e., a mixture of returned injection fluids and geologic formation brines) represents the largest volumetric waste stream associated with petroleum production in the United States. As such, produced water has been the focus of intense study with emphasis on understanding the geologic origin of the fluids, environmental impacts of unintended or intentional release, disposal concerns, and their commodity (e.g., lithium) potential. However, produced water geochemistry from many active petroleum plays remain poorly constrained leading to knowledge gaps associated with the origin of brine salinity and parameters (e.g., radium levels) that can impact treatment, disposal, and possible reuse. Here we evaluate the major ion geochemistry, radium concentrations, and stable water isotope composition of ~120 produced water samples collected from 17 producing unconventional petroleum wells in Weld County, Colorado from the Late Cretaceous Niobrara Formation. This sample set encompasses eight produced water time series from four new wells across production days 0 to ~365 and from four established wells across production days ~1000 to ~1700. Additionally, produced water from nine other established Niobrara Formation wells were sampled at discrete time points ranging from day 458 to day 2256, as well as hydraulic fracturing input fluids. These results expand the available Niobrara Formation produced water geochemical data, previously limited to few wells sampled within the first year of production, allowing for the heterogeneity of major ions and radium to be evaluated. Furthermore, we explore the geochemical relationships between major ion ratios and stable water isotope composition to understand the origin of salinity in Niobrara Formation brines from the Denver-Julesburg Basin. These findings are discussed with perspective toward potential treatment and reuse of Niobrara produced water prior to disposal.

Colorado, Nebraska, Wyoming↗
USGS2024

Predictions of groundwater PFAS occurrence at drinking water supply depths in the United States

Per- and polyfluoroalkyl substances (PFAS), known colloquially as “forever chemicals”, have been associated with adverse human health effects and have contaminated drinking water supplies across the United States owing to their long-term and widespread use. People in the United States may unknowingly be drinking water that contains PFAS because of a lack of systematic analysis, particularly in domestic water supplies. We present an extreme gradient boosting model for predicting the occurrence of PFAS in groundwater at the depths of drinking water supply for the conterminous United States. Our model results indicate that 71 to 95 million people in the conterminous United States potentially rely on groundwater with detectable concentrations of PFAS for their drinking-water supplies prior to any treatment.

conterminous United States↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗
USGS2024

A methodology to estimate CO2 and energy gas storage resources in depleted conventional gas reservoirs

Depleted hydrocarbon reservoirs are subsurface geological structures capable of sequestering vast quantities of carbon dioxide (CO 2 ) as well as storing other energy gases for later usage, such as natural gas, and potentially hydrogen (H 2 ). Here we outline a methodology to quantify multi-gas storage resources in depleted conventional gas reservoirs for usage in assessments by the United States Geological Survey (USGS) at the scale of sedimentary basins. The methodology consists first of quantifying accessible pore volume in a depleted reservoir for natural gas storage using up to three equations. Input data are derived from commonly reported or estimated reservoir parameters and natural gas production volumes, and equations may be combined in linear models to improve pore volume estimates. Storage estimates from these equations are tested and validated for 31 reservoirs in the Michigan Basin Province, USA that were previously converted to underground gas storage facilities and have known (federally reported) natural gas storage capacities. Secondly, natural gas storage capacities can be transformed via fluid substitution calculations to estimate the storage resources for non-native fluids, applied here for, CO 2 , H 2 , and methane-H 2 blends, accounting for molecule-specific deviations from ideal gas behavior at reservoir pressures and temperatures as well as differing storage efficiencies. Importantly, the storage of non-native fluids may not be appropriate in all depleted gas reservoir settings due to potential risks like leakage, in particular in the case of H 2 storage, requiring additional knowledge of caprock sealing capacity. Given this caveat, we demonstrate the fluid substitution method for natural gas reservoirs of the Northern Niagaran Reef and Southern Niagaran Reef USGS plays in the Michigan Basin Province, as these trends of Silurian pinnacle reefs are capped with tight-sealing evaporite facies. The deterministic equations outlined from this methodology can be incorporated into future probabilistic USGS gas storage assessments for CO 2 , H 2 , and natural gas resources in the United States.

Michigan↗
USGS2024

Deep syntectonic burial of the Anthracite belt, Eastern Pennsylvania

Fluid inclusion microthermometry and Raman spectroscopy of fluid inclusions in quartz veins from the Pennsylvanian rocks of the Anthracite belt, eastern Pennsylvania support a deep burial model of coalification in favor of focused orogenic hot fluid flow. High-temperature (250 to 255 °C) trapping of CH 4 ± CO 2 saturated aqueous fluids and CH 4 ± CO 2 inclusions indicate fluid trapping at depths of 11.5 to 13.4 km under a cover of Pennsylvanian to Permian(?) syntectonic load. In the folded rocks to the south of the Anthracite belt, CH 4 ± CO 2 fluid inclusions indicate a sediment load that was up to 16.3 km thick. Re -equilibrated aqueous fluid inclusions from veins in Silurian through Devonian rocks give the same range of trapping conditions but a wide range of fluid salinities suggesting that folding, fracturing, and meteoric recharge resulted in the intermixing of fluids from throughout the stratigraphic succession.

Pennsylvania↗
USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗
USGS2024

Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory

The U.S. Geological Survey (USGS) has developed two new carbon dioxide (CO2) emissions and sequestration accounting methods for use in future reports. The first method is a Federal lease-produced CO2 emissions calculation for an update of the report, “Federal Lands Greenhouse Gas Emissions and Sequestration in the United States.” The methodology to incorporate Federal lease CO2 production emissions into the updated report relies on CO2 sales royalty data from the Office of Natural Resources Revenue (ONRR). The end usage points for the gas include enhanced oil recovery with CO2 (CO2-EOR), food and beverage, and chemical production. CO2-EOR is the main end point for natural CO2 production in the United States; it accounted for 94% of usage in 2022 [1]. Federal lands emissions from this sector are estimated at 460 metric tons of CO2 in 2022, a very small amount relative to most other Federal lands emissions sector estimates. The second new method, planned for a separate report, is a calculation of the geologic storage of CO2 on Federal lands. The second method estimates the CO2 stored under Federal surface lands and documents Federal climate change mitigation efforts. Currently, there is no storage of CO2 at an industrial level on Federal lands, however multiple proposals and projects are planned. This method was developed on non-Federal lands datasets in an effort to prepare for when these activities on Federal lands will require accounting. National estimates for CO2 geologic storage using this method, but without a Federal lands filtering step, totaled 8.0 million metric tons (Mt) in 2022. The two methods described here are new benchmark methods in a collection of accounting procedures to document the current state of greenhouse gas emissions and their storage on Federal lands. These benchmarks can then be used to measure any subsequent changes in emissions from or carbon storage beneath Federal lands. While the magnitude of the values is currently non-existent to small, emissions mitigation goals established by decision makers indicate that these values will grow, and their documentation will take on greater value and use.

continental United States↗
USGS2024

Unscrambling the Proterozoic supercontinent record of northeastern Washington State, USA

The time interval from Supercontinent Nuna assembly in the late Paleoproterozoic to Supercontinent Rodinia breakup in the Neoproterozoic is considered by some geologists to comprise the “Boring Billion,” an interval possibly marked by a slowdown in plate tectonic processes. In northeastern Washington State, USA, similar to much of western Laurentia, early workers generally thought the tectonostratigraphic framework of this interval of geologic time consisted of two major sequences, the (ca. 1480–1380 Ma) Mesoproterozoic Belt Supergroup and unconformably overlying (<720 Ma) Neoproterozoic Windermere Supergroup. However, recent research indicates that strata considered by early workers as Belt Supergroup equivalents are actually younger, and a post-Belt, pre-Windermere record is present within the <1360 Ma Deer Trail Group and <760 Ma Buffalo Hump Formation. Thus, the northeastern Washington region perhaps comprises the most complete stratigraphic record of the “Boring Billion” time interval in the northwestern United States and holds important insights into global Proterozoic supercontinent tectonic processes. In light of these exciting developments, this field guide will address the early historic economic geology and original mapping of these Proterozoic sequences in the northeastern Washington region, and from that foundation explore more recent isotopic provenance data and their regional to global context. Finally, the guide will end with a discussion of remaining questions with a goal of stimulating interest in these relatively understudied, yet important, rocks.

Washington↗
USGS2024

Apatite and monazite geochemistry record magmatic and metasomatic processes in rare earth element mineralization at Mountain Pass, California

The largest rare earth element (REE) deposit in the United States is a carbonatite intrusion at Mountain Pass in the Mojave Desert, California. Despite a clear spatiotemporal association of alkaline silicate and carbonatite intrusions at Mountain Pass, a genetic model of their mutual formation has not been resolved. The Mountain Pass carbonatite has long been upheld as an example of a primary magmatic body, but recent work has suggested it could be fluid-derived. This study investigates the geochemistry of apatite and monazite grains from the alkaline silicate and carbonatite stocks and dikes of the Mountain Pass district, to elucidate the magmatic history of the intrusive suite and identify the role of fluids in rare earth element mineralization. Three apatite populations are identified in the alkaline silicate rocks. A primary magmatic apatite group supports intrusion of the stocks as separate pulses of magma derived from a spatially extensive metasomatized mantle source region. The second group implicates the role of a regional fluid that mobilized light rare earth elements from apatite grains. A minor group of inherited apatite cores, identified by low Sr and negative Eu anomalies, supports assimilation of crustal material in the formation of the intrusive suite. Analyses of monazite and apatite grains from the carbonatite orebody also reveal a mix of primary magmatic and metasomatic (fluid-related) minerals. Compositional similarities between primary phosphates in the carbonatite and alkaline silicate rocks support a genetic link between the intrusive suites. The presence of fluids regionally and within the carbonatite orebody indicates the Mountain Pass carbonatite should not be classified as a purely magmatic REE deposit.

Arizona, California, Nevada↗
USGS2024

Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California

The Pinto Mountain Fault Zone (PMFZ) marks a major structural boundary between east-oriented sinistral faults of the eastern Transverse Ranges (to the south) and northwest-oriented dextral faults of the south-central Mojave Desert (to the north). These structural fault systems comprise sinistral and dextral deformational domains of the Eastern California Shear Zone (ECSZ) that intersect one another in the Copper Mountain and Twentynine Palms areas. The U.S. Geological Survey (USGS) is conducting detailed geologic mapping and geochronologic investigations designed to clarify geometric, kinematic, and temporal relations among the two domains, that are focused on the central portion of the left-lateral PMFZ near its intersection with the right-lateral Copper Mountain Fault (CMF) and Mesquite Lake Fault Zone (MLFZ).

California↗
USGS2024

Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method

A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.

Louisiana↗
USGS2024

Geophysical characterization of mine influenced groundwater and surface water in the Mayflower section of the Animas River, Bonita Peak Mining District, Silverton Colorado

This report details findings from geophysical investigations to identify possible groundwater - surface water interactions near the Mayflower Section of the Animas River in Silverton, Colorado. The Mayflower Section is a mine influenced Superfund Site in Colorado. This investigation utilized electromagnetic induction (EM or EMI), magnetic, and fiber optic distributed temperature system (FODTS) geophysical methods to measure the bulk earth electrical conductivity, magnetic susceptibility, and temperature of specific surveyed volumes of the earth near the Mayflower Section of the Animas River. These physical parameters are used to understand the groundwater – surface water interactions, which can guide decision makers in their assessment of mine-impacted surface water. This report details the results from characterization and monitoring technologies to provide high data density and continuous monitoring of bulk earth electrical conductivity and temperature in the Mayflower section of the Animas River to identify zones of groundwater – surface water interactions and potential metal loading from mine influenced water. The investigation separated right and left bank characterization for each method and indicates more groundwater is entering from the right bank than the left bank and these predominantly right bank discharges potentially contain metal-rich water compared to the left bank. Results also indicate mineral veins facilitate preferential groundwater discharge to the river due to possible jointing, fractures, and permeability differences sometimes occurring along veins relative to host rock. For example, Boulder Gulch is likely groundwater dominated and may be receive water impacted by Mayflower Impoundments #1 and #2. Additionally, the beaver ponds near Blair Gulch may influence groundwater discharge and Mayflower Impoundment #4 is possibly impacting groundwater and surface water and may be connected to the wetlands to the west of the impoundment. These data could be further analyzed for smaller spatial scale analysis within areas of interest. The identification of these locations along sections of the river likely impacted by mine influenced groundwater potentially entering the Animas River and can be used by site investigators, decision makers, and stakeholders in mitigation decisions and strategies.

Colorado↗
USGS2024

Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA

The Magnet Cove alkaline‑carbonatite complex (MCC), located in the Ouachita Mountains of south-central Arkansas in the United States, hosts an extensive variety of rare rock types and critical mineral resources with physical properties (density and magnetization) that contrast significantly with the sedimentary rocks into which they have intruded. Newly acquired ground-based gravity and magnetic data were used to develop two-dimensional and three-dimensional geophysical models of the Cretaceous-aged Magnet Cove intrusive complex. The models reveal that the MCC: (1) widens out at middle crustal depths to as much 22 km across, and may reach a depth of 20 km; (2) has a total volume (exposed and subsurface) that may be over 800 km 3 ; (3) is likely connected at depth to other intrusions in the Arkansas alkaline province; and (4) has a geometry that is aligned with pre-existing structures such as the Reelfoot rift and the Ouachita orogenic belt, some of which were likely structurally controlled by the Precambrian crystalline basement and the continent-ocean transition zone buried beneath the Ouachita orogen. For the first time, the magnetic models of the MCC account for the presence of strong remanent magnetization. This results in a geophysical workflow necessary to accurately interpret magnetic anomalies over the much larger Arkansas alkaline province, its geologic and structural framework, and critical mineral potential.

Arkansas↗
Compare source metadata on this page
WorkPublishedSource identifierSource
Event classification, seismicity, and eruption forecasting at Great Sitkin Volcano, Alaska: 1999–2023202470259409usgs
Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado202470259608usgs
Indications of preferential groundwater seepage feeding northern peatland pools202470259615usgs
Produced water geochemistry from hydraulically stimulated Niobrara Formation petroleum wells: Origin of salinity and temporal perspectives on treatment and reuse202470259702usgs
Predictions of groundwater PFAS occurrence at drinking water supply depths in the United States202470260109usgs
Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA202470260660usgs
Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida202470260840usgs
A methodology to estimate CO2 and energy gas storage resources in depleted conventional gas reservoirs202470260865usgs
Deep syntectonic burial of the Anthracite belt, Eastern Pennsylvania202470260874usgs
Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources202470260970usgs
Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory202470261053usgs
Unscrambling the Proterozoic supercontinent record of northeastern Washington State, USA202470261210usgs
Apatite and monazite geochemistry record magmatic and metasomatic processes in rare earth element mineralization at Mountain Pass, California202470261260usgs
Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California202470261298usgs
Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method202470261302usgs
Bedrock geologic map of Organ Pipe Cactus National Monument and vicinity, southwest Arizona202470261413usgs
Geophysical characterization of mine influenced groundwater and surface water in the Mayflower section of the Animas River, Bonita Peak Mining District, Silverton Colorado202470262531usgs
Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA202470262849usgs

These are bibliographic comparisons, not experimental rankings. Follow the original document for methods and conditions.