Geology topics

Geologic maps

Explore USGS geologic-map records. Search a place or quadrangle name and follow the source publication for map sheets, scale and accompanying explanatory text.

Follow this topic with RSS

At least 613 records · Page 34Linked to original sources

USGS2014

Assessing the importance of terrain parameters on glide avalanche release

Glide snow avalanches are dangerous and difficult to predict. Despite recent research there is still a lack of understanding regarding the controls of glide avalanche release. Glide avalanches often occur in similar terrain or the same locations annually and observations suggest that topography may be critical. Thus, to gain an understanding of the terrain component of these types of avalanches we examined terrain parameters associated with glide avalanche release as well as areas of consistent glide crack formation but no subsequent avalanches. Glide avalanche occurrences visible from the Going-to-the-Sun Road corridor in Glacier National Park, Montana from 2003-2013 were investigated using an avalanche database derived of daily observations each year from April 1 to June 15. This yielded 192 glide avalanches in 53 distinct avalanche paths. Each avalanche occurrence was digitized in a GIS using satellite, oblique, and aerial imagery as reference. Topographical parameters such as area, slope, aspect, elevation and elevation were then derived for the entire dataset utilizing GIS tools and a 10m DEM. Land surface substrate and surface geology were derived from National Park Service Inventory and Monitoring maps and U.S. Geological Survey surface geology maps, respectively. Surface roughness and glide factor were calculated using a four level classification index. . Then, each avalanche occurrence was aggregated to general avalanche release zones and the frequencies were compared. For this study, glide avalanches released in elevations ranging from 1300 to 2700 m with a mean aspect of 98 degrees (east) and a mean slope angle of 38 degrees. The mean profile curvature for all glide avalanches was 0.15 and a plan curvature of -0.01, suggesting a fairly linear surface (i.e. neither convex nor concave). The glide avalanches occurred in mostly bedrock made up of dolomite and limestone slabs and talus deposits with very few occurring in alpine meadows. However, not all glide avalanches failed as cohesive slabs on this bedrock surface. Consequently, surface roughness proved to be a useful descriptive variable to discriminate between slopes that avalanched and those that did not. Annual 'repeat offender' glide avalanche paths were characterized by smooth outcropping rock plates with stratification planes parallel to the slope. Combined with aspect these repeat offenders were also members of the highest glide category. Using this understanding of the role of topographic parameters on glide avalanche activity, a spatial terrain based model was developed to identify other areas with high glide avalanche potential outside of our immediate observation area.

Montana↗

USGS2020

Memorial to Jack B. Epstein 1935-2020

Jack Burton Epstein, a career geologist with the U.S. Geological Survey (USGS) passed away in May 2020 at his home in Great Falls, Virginia. His career and contributions to the USGS spanned more than 60 years from his time as a summer field assistant while attending college, through 40 years as a research geologist, and more than 15 years as an emeritus scientist. Jack was born December 27, 1935 in Brooklyn, New York and attended CUNY- Brooklyn College where he received his Bachelor of Science degree in geology in 1956. He earned his Master of Science degree in 1958 from the University of Wyoming, and his doctorate degree in geology in 1970 from The Ohio State University. His master’s thesis was geologic mapping of the Fanny Peak quadrangle, Black Hills of Wyoming and South Dakota, and his Ph. D. dissertation focused on the geology of the Stroudsburg quadrangle and adjacent areas, Pennsylvania and New Jersey.

Geological Society of America Memorials↗

USGS2020

A transect through Vermont's most famous volcano - Mount Ascutney

The Cretaceous Ascutney Mountain igneous complex affords a classic exposure of the White Mountain Igneous Suite. Often called Vermont’s most famous volcano, Mount Ascutney (elev. 3,144 feet, 958 m) stands as a prominent monadnock in the Connecticut River Valley. The mountain often serves as an inspirational landmark, as it does when viewed from locations throughout the valley including the Saint-Gaudens National Historic Site (Walsh, 2017). The Ascutney Mountain igneous complex (Ratcliffe and others, 2011) consists of several mafic to felsic nested plutons including gabbro-diorite exposed at Little Ascutney to the west, and the Ascutney Mountain stock composed of syenite, granite, and related volcanic rocks underlying the main summit to the east (Fig. 1) (Schneiderman, 1989, 1991). Foland and Faul (1977) and Foland and others (1985) dated the gabbro-diorite complex at 125.5 to 122.2 Ma by K-Ar on biotite and by whole rock Rb/Sr, and dated the syenite-granite complex at 123.2 to 121.4 Ma by K-Ar on biotite. During the field trip we will visit the host rocks south of the mountain and the main rocks types of the Ascutney Mountain stock exposed near the summit and along the Mount Ascutney toll road. Mount Ascutney is the classic location where Daly (1903) discussed the evidence for piecemeal stoping as a pluton emplacement mechanism. This theory was later modified to favor cauldron subsidence, or ring-fracture stoping, as an alternative mode of emplacement (Chapman and Chapman, 1940). Our new mapping (Walsh and others, in press), which supersedes an earlier provisional study (Walsh and others, 1996a, b), supports the cauldron subsidence model, and shows that the main Ascutney Mountain stock is a funnel shaped composite pluton in agreement with geophysical data (Daniels, 1990). This field guide will primarily highlight the results of the new geologic mapping. This field guide is modified from a field trip presented in 2017 (Walsh, 2017). Additional stops have been added to examine the host rocks in the region south of the Ascutney Mountain stock. Two hikes are planned as part of this trip. Other NEIGC field trip guides to Mount Ascutney include Stoiber (1954) and Schneiderman (1988).

Vermont↗

USGS2020

Geothermal play fairway analysis of the Sou Hills, northern Nevada: A major quaternary accommodation zone in the Great Basin region

To facilitate discovery and development of blind geothermal systems in the Great Basin region, as well as assessment of known systems with surface hot springs, a play fairway approach was developed to evaluate and integrate multiple geologic and geophysical parameters for permeability and heat. Phase 1 of the project produced a geothermal potential map of 96,000 km2 of Nevada. This analysis yielded 24 highly favorable locations with particularly high fairway scores, from which five promising sites were selected for detailed studies. The Sou Hills was chosen as a detailed study area due to a complex structural setting, plethora of Quaternary normal faults, and relatively high rates of both regional strain and slip on Quaternary faults. Our analysis of the Sou Hills utilized: 1) detailed geologic mapping of ~60 km2, 2) reconnaissance mapping of >200 km2, 3) analysis of Quaternary faults, 4) detailed logging of cuttings from four, previously drilled wells (~2,000 m) and integration of ~5,500 m of existing logs from nine other wells, 5) a new gravity survey (355 stations), 6) LiDAR acquisition for 290 km2, 7) a shallow temperature survey (82 stations), 8) interpretation of seven seismic reflection profiles, 9) slip and dilation tendency analyses, and 10) geochemical analyses of 23 water samples. Integration of these datasets shows that the Sou Hills occupies a major accommodation zone between oppositely dipping Quaternary normal fault systems. As such, the area is characterized by multiple, closely-spaced, west- and east-dipping Quaternary normal faults, many of which are favorably oriented for slip and dilation in the current stress regime. Seismic reflection and gravity data show an extensional anticline in northernmost Dixie Valley directly south of the Sou Hills. The anticline marks a zone of multiple intersecting, oppositely dipping normal faults and represents a particularly favorable site for potentially hosting a geothermal system.

Nevada↗

USGS2019

The US Geological Survey’s Earth Mapping Resources Initiative (Earth MRI)—Providing framework geologic, geophysical, and elevation data to the nation’s critical mineral-bearing regions

New detailed mapping of the geologic resources of the Nation has the potential to significantly close the gap in the essential data needed to fuel a modern era of economic development and technological innovation, while at the same time dramatically enhancing our understanding of the fundamental way geology impacts everyday life, from the domestic critical mineral resources that are necessary for modern technology and the economy, to domestic energy and water resources, geologic hazards, agriculture, and other pressing needs. The U.S. Geological Survey established the Earth Resources Mapping Initiative (Earth MRI) to address the shortfall in geologic, geophysical, and elevation data with sufficient detail to support evaluation of regions in the United States that have potential to host critical mineral resources. The new effort is a collaboration with the Association of American State Geologists, who are providing new detailed geologic maps and making available online archived data and information related to critical mineral resources. The geophysical and lidar surveys are being contracted through industry specialists to assure that high-quality data are available to the public. This article provides an overview of the Earth MRI effort with discussions on the initial geophysical surveys funded for areas that have known potential for rare earth element resources. Subsequent projects are being designed to address areas that may host other critical mineral resources.

Fast Times↗

USGS2020

Exploring regional scale metamorphic fabrics in the Yukon Tanana terrane and environs using quantitative domain analyses

Metamorphic rock fabrics such as foliations and lineations provide a rock record of numerous deformational characteristics in the Earth’s crust. When spatial information is combined with fabric data collected at points on geologic maps, the nature and consistency of metamorphic fabrics can be explored through structural domain analysis. This is particularly useful in large regions where there is not well-established stratigraphy and where bedrock exposures are limited. Domains that contain distinctive orientations and patterns of fabrics can be constructed on the basis of several different parameters, but in folded, polydeformational regions cylindricity can be particularly useful. Distinct domains of cylindrical folding can sometimes be determined where poles to foliations show characteristic patterns on equal-area projections and lie perpendicular to a single axis in space. Additionally, the patterns of elements such as fold axes and mineral lineations can be used in conjunction with foliation data to refine domains and confirm parameters such as coaxiality.

Alaska, Yukon↗

USGS2021

Stop 3 – The Petersburg “Granite” redefined: Recognition and implications of Silurian to Devonian rocks in central-eastern Virginia

Introduction Although the Petersburg Granite had long been in practical use as a building stone since the 1830s (Watson, 1906; 1907; 1910; Darton, 1911; Steidtmann, 1945), it was first formally defined as a geologic unit by Anna Jonas on the 1928 geologic map of Virginia. Anna Jonas defined this unit as a Precambrian coarse-grained porphyritic biotite granite that was intruded by finer grained granite and cut by pegmatite (Nelson, 1928). This belt of mostly granitic rocks extends from near Ashland, Virginia north of Richmond, to near Stony Creek, south of Petersburg, Virginia (e.g., Virginia Division of Mineral Resources, 1993) and is bounded by the Hylas fault zone to the northwest, the Mesozoic Richmond basin to the west, and the newly recognized Nottoway River fault zone to the southwest (e.g., Carter and others, 2020; 2021). The eastern boundary of this belt is covered by Coastal Plain sediments, but geophysical and deep borehole data suggest an orogen-scale suture separates it from the Neoproterozoic Chesapeake block to the east (Figure 1; Carter and others, 2021).

Virginia↗

USGS2022

Hyperspectral Thermal Emission Spectrometer (HyTES) images of basaltic and sedimentary deposits in the southwest Cima volcanic field, California

The southwestern part of the Cima volcanic field in the Mojave National Monument, California, contains many of the youngest basaltic cinder cones and lava flows in the field (Wilshire and others, 2002). In 2014 the Hyperspectral Thermal Emission Spectrometer (HyTES) collected a swath of data across this area. This summary describes the HyTES instrument, data, and images, and compares two standard images to the geologic map and aerial photographs. In aerial photographs (visible spectrum) and HyTES images (thermal infrared spectrum), there are very good correlations of features such as pahoehoe and a`a flows (smoother or rougher surfaces, respectively), channelized features such as levees and flow-induced arcuate ridges across the channels, some flows with rafted parts of the source cinder cone, and different types of sedimentary deposits. The comparison is visual and qualitative; however, it shows the potential for applying hyperspectral data in a quantitative characterization and identification of lava flows and cones, sedimentary deposits, and locally exposed bedrock gneiss.

California↗

USGS2016

Katmai National Park and Preserve and Alagnak Wild River: Geologic resources inventory report

The Geologic Resources Inventory (GRI) is one of 12 inventories funded by the National Park Service (NPS) Inventory and Monitoring Program. The Geologic Resources Division of the NPS Natural Resource Stewardship and Science Directorate administers the GRI. This GRI report was written for resource managers to support science-informed decision making. It may also be useful for interpretation. The report was prepared using available geologic information. Chapters of the report discuss distinctive geologic features and processes, describe the geologic history leading to the present- day landscape, highlight geologic issues facing resource managers, and provide information about the associated GRI geologic map data. A poster (Plate 1, in pocket) illustrates these data.

Alaska↗

USGS2018

Geothermal potential of the Umatilla Indian Reservation, Oregon: Evidence from detailed geophysical investigations

Recent geologic and geophysical investigations were undertaken in northeastern Oregon to better assess earthquake hazards in the region and determine relative favorability for geothermal energy development on lands of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR). This work was funded in part by a Bureau of Indian Affairs grant awarded to the CTUIR to identify areas most suitable for further exploration of geothermal resources. Results from this work were utilized as inputs to a geothermal favorability modeling process that led to the identification of target sites for further geothermal investigation. Beyond the geothermal aspect of this project, the region is of great tectonic significance as it marks the intersection of two major physiographic and geophysical features, the Klamath-Blue Mountain lineament (KBL) and Olympic-Wallowa lineament (OWL), inferred to represent major basement boundaries. The Thorn Hollow and Hite faults, which appear to be major linkages between the KBL and OWL, run through the study area. New aeromagnetic, gravity and magnetotelluric (MT) surveying, along with fault analyses, were conducted as part of this effort. Detailed geophysical exploration resulted in the collection of 1,380 new gravity stations, 34,524-line kilometers of aeromagnetic data (covering 12,524 km2) and measurements from 36 MT stations. Two-dimensional (2D) forward-modeling was executed along several profiles using gravity and aeromagnetic data, combined with existing geologic mapping and rock property constraints measured from hand samples and outcrops. These models are used to define lithologic contacts in the subsurface in the absence of well logs or borehole data to determine possible geothermal fluid reservoirs, as well as identify major structures that may act as conduits for the upward migration of geothermal fluids.

Oregon↗

USGS2023

New high resolution airborne geophysical surveys in Nevada And California for geothermal and mineral resource studies

The U.S. Geological Survey (USGS) and the Department of Energy (DOE) are collaborating to acquire high-resolution airborne magnetic and radiometric data to support geologic and geophysical mapping and modeling that will assist geothermal and critical mineral studies. Coordinated with these efforts are programs supporting geologic mapping and airborne LiDAR (light detection and ranging) surveys that yield detailed surface topographic models of the terrain over the same regions spanned by the geophysical surveys. The collaboration leverages resources from the USGS and DOE to acquire large regional datasets that will provide fundamental data necessary to map surface and subsurface geology and structure to benefit mineral and resource program objectives of both agencies. Such regionally uniform datasets are important for geothermal research to assist in identifying geologically favorable settings and as invaluable inputs in predictive models targeting undiscovered resources that use knowledge-driven (e.g., play fairway analysis) or data-driven approaches (e.g., machine-learning methods) to reduce risk associated with resource exploration. These data will also serve a wide range of other related activities from hazard (earthquake, volcano, landslide, environmental) and resource (water, mineral, energy) studies, to mapping and land management. Surveys were conducted in two areas that were selected because they host substantial geothermal and mineral potential in California and Nevada. The data will aid several ongoing USGS and DOE projects aimed at characterizing geothermal and mineral systems, understanding the factors controlling their occurrence, and improving future national resource assessments. The first of these surveys (referred to as GeoDAWN) was collected over northern and western Nevada and eastern California and spans areas of major resource potential associated with the Walker Lane and western Great Basin. This includes Clayton Valley, which hosts substantial lithium brine and clay resources, and the Humboldt Mafic Complex, which constitutes a potentially important resource of critical minerals (including cobalt, rare earth elements, platinum group elements, iron, chromium, nickel, and copper). The second survey area (referred to as GeoFlight) is focused over the Salton Trough in southern California that contains some of the largest and hottest known hydrothermal systems in the world, as well as a substantial lithium brine resource that could potentially meet the nation’s lithium demand for electric vehicles. Data from both surveys will be made publicly available through USGS publications and online data repositories. Future efforts under this collaboration are presently being evaluated and may involve acquisition of other data sets such as airborne gravity, electromagnetic or hyperspectral data to address research targets.

Conference Paper↗

USGS2025

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah↗

USGS2025

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada↗

USGS2025

40Ar/39Ar geochronology supporting mineral resources research at USGS Denver

The 40 Ar/ 39 Ar geochronology method is used to date potassium-bearing rocks and minerals, based on the decay of 40 K to 40 Ar, which provides important temporal constraints for geological events. The USGS Denver Argon Geochronology Laboratory dates samples from a variety of projects, mainly in the USGS Mineral Resource Program and the National Cooperative Geologic Mapping Program, facilitating in-depth research into the timing of geological events and processes. Recent applications of this method include geochronological studies in the Yellow Pine district, revealing mineralization ages that range from 51 to 70 Ma, and investigations into the Bear Lodge alkaline complex, providing insights into the timing of REE carbonatite formation. Additionally, studies at Alunite Ridge highlight the method's potential for understanding concealed mineral deposits. Ongoing projects continue to leverage 40 Ar/ 39 Ar data to enhance understanding of geologic frameworks and mineral resources, underpinning its importance in modern geochronology and mineral resource assessment.

Conference Paper↗

USGS2025

Detecting hidden sedimentary geothermal systems in the Upper Colorado River Basin

Geothermal resources exist in sedimentary rock where circulation of water for efficient extraction or storage of heat is possible. Except in rare instances where hot water is expressed at the land surface, sedimentary geothermal resources are hidden, so the identification of these systems is optimally accomplished using predictive subsurface modeling. An integrated approach using detailed paleogeographic interpretations, subsurface geologic mapping, and numerical modeling has produced regional geologic and temperature models for the Upper Colorado River Basin, a large watershed in central North America that contains many sedimentary basins. These models identify areas of hidden sedimentary geothermal resource potential in low temperature (<90°C), moderate temperature (90–150°C), and high temperature (>150°C) fairways across the study area. These models incorporate maps of key horizons in outcrop and the subsurface to create a robust structural framework that can be used to target favorable geology for natural or engineered permeability. This framework is populated with lithologies derived from detailed palaeogeographical maps and over 40,000 bottom hole temperature (BHT) values were used to create a calibrated three-dimensional (3D) temperature model across the region. The resulting maps serve as a regional sedimentary geothermal play fairway screening tool for evaluating different grades of sedimentary geothermal resources and for identifying areas of interest where more detailed, prospect-scale studies can be undertaken.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

USGS2026

Stepovers and beyond: Structural control of The Geysers geothermal system and the broader Clear Lake region

Fault geometry exerts a first-order control on geothermal systems by governing stress localization, fracture development, and permeability, yet in complex fault networks or broader shear zones, the relative influence of individual geometric features is often difficult to resolve. In the northern California Coast Ranges, The Geysers geothermal field is commonly interpreted to occur within a releasing stepover, although no single, clearly defined stepover is identified in published studies. To investigate the structural controls on The Geysers and the broader Clear Lake region, a two-dimensional elastic boundary element model is developed to evaluate spatial patterns of dilational strain associated with progressively more complete fault geometries. Model results show that dilation in the region is not controlled by a single structure but instead reflects the combined effects of multiple interacting fault elements. Three primary controls are identified: (1) opposing bends in the regional strike-slip fault system, including a releasing bend along the Maacama fault; (2) the southern fault tip of the Collayomi fault, which generates a prominent dilational lobe beneath the southern Geysers; and (3) a releasing stepover between the Collayomi fault and the Geyser Peak–Mercuryville–Big Sulphur Creek fault system, inferred to collectively behave as a right-lateral shear zone bounding the western margin of The Geysers. Predicted dilational strain magnitudes are sufficient to localize permeability between faults. These results highlight that incorporating complete fault networks and bedrock geological mapping can enhance geothermal assessments and provide a transferable framework for evaluating structurally controlled permeability in tectonically active regions.

California↗

USGS2026

Revisiting the utility of regional-scale, high-quality geophysical data in mineral exploration - A case study featuring the Mammoth Magnetic Anomaly, Pinal County, Arizona

Regional aeromagnetic surveys passively measure the total magnetic intensity (TMI) and are a foundational tool used in mineral exploration (Airo, 2015). With the increased global demand and the number of critical mineral resources required for manufacturing high-tech devices, developing high-quality, regional-scale geophysical surveys could aid critical mineral exploration efforts and geologic mapping. In 2019, the U. S. Geological Survey launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the geologic and geophysical mapping of regions that have the potential to contain critical mineral resources within the United States. In support of planning Earth MRI geophysical surveys, Drenth and Grauch (2019) defined five aeromagnetic data quality rankings (rank 1 through rank 5) applying them to the airborne geophysical survey inventory of the United States (Johnson et al., 2021). Rank 1 aeromagnetic surveys are of the highest quality, meeting modern standards and allowing best practices for qualitative and quantitative interpretation; whereas rank 5 aeromagnetic surveys are of the lowest quality, being useful only for qualitative interpretation of broad features. Through the Earth MRI effort, 48 high-quality, regional-scale rank 1 and 2 airborne magnetic and radiometric geophysical surveys have been planned, collected, or publicly release through May 2025 (U. S. Geological Survey, 2025). Here, a portion of a rank 1 Earth MRI aeromagnetic survey in southeast Arizona is presented and compared to a legacy rank 5 aeromagnetic survey over the Mammoth Magnetic Anomaly (MMA), demonstrating how modern, high-quality aeromagnetic data improves our view of crustal geology, aiding mineral exploration.

Arizona↗

USGS2025

Airborne geophysical efforts for critical mineral systems mapping in the southern Midcontinent, USA

The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.

southern Midcontinent↗