Geology topics

Wade H. Kress

Publications and source records attributed to Wade H. Kress.

At least 19 recordsLinked to original sources

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

USGS2026

The saline groundwater legacy of a large buried coastal paleo-estuary

Elevated groundwater salinity in coastal regions threatens the beneficial use of fresh groundwater. Coastal groundwater management typically focuses on preventing intrusion from modern sources of seawater; however, past geological processes can also leave a legacy of saline groundwater now hidden in the subsurface. Here, multiple extensive airborne electromagnetic surveys provide detailed evidence of residual salinity from a paleo-estuary filling a late Pleistocene incised valley impacting more than 10,000 km 2 that is now hidden beneath coastal Louisiana’s deltaic plain. Our results show that the three-dimensional pattern of saline groundwater beneath Louisiana mimics that of near-surface aquifers surrounding the modern Delaware Bay estuary, fingerprinting the signature of the past drowning of a large, incised valley of the Mississippi River following post-glacial sea-level rise. These findings demonstrate a new framework for understanding legacy sources of saltwater critical for managing stressed water resources along global coastlines.

Louisiana↗

USGS2025

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer↗

USGS2025

Multi-lithofacies alluvial characterization via airborne electromagnetic-borehole fusion using ordinary interval kriging and geologic constraints

Airborne electromagnetic (AEM) survey provides extensive spatial coverage and detailed resolution at the near surface and can be used to develop hydrogeological models. However, utilization of AEM data is not straightforward because AEM resistivity is an indirect measurement for inferring sediment types. This study develops an ordinary interval kriging (OIK) algorithm and a resistivity-to-multi-lithofacies (R2ML) data fusion workflow for multi-lithofacies alluvial characterization. OIK utilizes irregular interval data to construct three-dimensional (3D) resistivity fields from one-dimensional inverted AEM resistivity models. The R2ML workflow maps the resistivity field generated from OIK into a multi-facies lithological model, incorporating geologic constraints derived from well logs and geological observations. The numerical and real-world cases demonstrate that OIK is computationally efficient, accounts for 3D anisotropy, and minimizes the smoothing effect, thereby preserving resistivity contrasts and reducing interpolation uncertainty. The methodology is applied to lithologic characterization of the Mississippi River Valley alluvial aquifer (MRVA) in the Shellmound area, Mississippi, U.S. A frequency-domain AEM survey was conducted to support groundwater studies for the managed aquifer recharge (MAR) to the MRVA. The resulting lithological model, including four types of lithofacies—clay, very fine sand, fine-medium sands, and graveliferous sands, illustrates the geomorphological processes of the MRVA and implies potential MAR. The alignment between the lithological model and existing geological and hydrogeological investigations demonstrates that OIK and R2ML workflow effectively capture the subsurface architecture of the MRVA. The methods have broad applicability for characterizing alluvial aquifers through AEM-borehole data fusion, supporting sustainable groundwater management.

Mississippi↗

USGS2025

Airborne geophysical analysis to decipher salinization for coastal Louisiana

Coastal Louisiana is known for saltwater intrusion that threatens wetlands, aquifers, and rivers. However, the extent of saltwater intrusion is not well understood. This study develops an innovative framework with airborne electromagnetic (AEM) data to map chloride concentration distributions for wetlands in the Mississippi River deltaic plain and Chenier plain as well as for the Mississippi River Valley alluvial aquifer (MRVA) and Chicot aquifer. Moreover, the framework maps chloride concentrations along the Mississippi River and Atchafalaya River. Key components in the framework include the establishment of resistivity-to-chloride concentration transformation, 3D resistivity architecture building through geostatistics, and the employment of a lithologic model. The transformation functions correlate AEM resistivity data with porewater salinity measurements and groundwater and river chloride samples. The results show that AEM data reliably infers soil water chloride concentrations and correlates well with the distribution of various marsh types. AEM data reveals extensive saltwater presence at depth and near the coast, originating from salt domes and the Gulf of Mexico, respectively. The saltwater upconing pattern in the Chicot aquifer is likely due to excessive groundwater withdrawals. The AEM data also confirms a distinct tongue of saltwater intruding into the Atchafalaya Basin from the Gulf. The AEM data helps to identify faults that are obscured or eroded at the surface, which appear as leaky barriers in the subsurface where dramatic changes in chloride concentration are apparent. Finally, this study uses the AEM data to infer the presence of an extensive seawater wedge in the Mississippi River and Atchafalaya River.

Louisiana↗

USGS2024

Improving crop-specific groundwater use estimation in the Mississippi Alluvial Plain: Implications for integrated remote sensing and machine learning approaches in data-scarce regions

Study region The Mississippi Alluvial Plain (MAP) in the United States (US). Study focus Understanding local-scale groundwater use, a critical component of the water budget, is necessary for implementing sustainable water management practices. The MAP is one of the most productive agricultural regions in the US and extracts more than 11 km 3 /year for irrigation activities. Consequently, groundwater-level declines in the MAP region pose a substantial challenge to water sustainability, and hence, we need reliable groundwater pumping monitoring solutions to manage this resource appropriately. New hydrological insights for the region We incorporate remote sensing datasets and machine learning to improve an existing lookup table-based model of groundwater use previously developed by the U.S. Geological Survey (USGS). Here, we employ Distributed Random Forests, an ensemble machine learning algorithm to predict annual and monthly groundwater use (2014–2020) throughout this region at 1-km resolution, using pumping data from existing flowmeters in the Mississippi Delta. Our model compares favorably with the existing USGS model, with higher R 2 (0.51 compared to 0.42 in the previous model), and lower root mean square error (RMSE) and mean absolute error (MAE)— 0.14 m and 0.09 m, respectively in our model, compared to 0.15 m and 0.1 m in the previous model. Therefore, this work advances our ability to predict groundwater use in regions with scarce or limited in-situ groundwater withdrawal data availability.

Journal of Hydrology Regional Studies↗

USGS2023

Estimating streambed hydraulic conductivity for selected streams in the Mississippi Alluvial Plain using continuous resistivity profiling methods—Delta region

Introduction The Mississippi Alluvial Plain is one of the most important agricultural regions in the United States, and crop productivity relies on groundwater irrigation from an aquifer system whose full capacity is unknown. Groundwater withdrawals from the Mississippi River Valley alluvial aquifer have resulted in substantial groundwater-level declines and reductions in base flow in streams within the Mississippi Alluvial Plain. These effects are limiting well production and threatening future water availability in the region. A comprehensive assessment of water availability in the Mississippi Alluvial Plain is critically important for making well-informed management decisions about sustainability, establishing best practices for water use, and predicting changes to water levels in the Mississippi Alluvial Plain over the next 50–100 years. The first step in the new regional modeling effort was to run the existing Mississippi Embayment Regional Aquifer Study (MERAS) model and perform data-worth and uncertainty analyses to prioritize data collection efforts to improve model forecasts. Parameter estimation indicated that streambed conductance was one of the variables that the model was most sensitive to, but little data were available to constrain those general estimates. From this characterization of the existing data, a map of the streams that the MERAS model was most sensitive to was created by the U.S. Geological Survey to guide the collection of 862 kilometers of waterborne resistivity surveys within the Delta region of Mississippi to characterize streambed lithology. This technique characterizes the streambed itself and the 15–30 meters below the streambed that control the exchange of water between the stream and the alluvial aquifer. These data can be used to map changes in the lithology of the streambed and identify areas of potential groundwater/surface-water exchange. Additionally, electrical and nuclear well logs from the study area were compared to facilitate the development of a petrophysical relation between the waterborne resistivity data and hydraulic conductivity. Resistivity values may then be used as a cost-effective way to approximate aquifer hydraulic conductivity distributions for use in regional groundwater models.

Arkansas, Louisiana, Mississippi↗

USGS2023

Simulation of monthly mean and monthly base flow of streamflow using random forests for the Mississippi River Alluvial Plain, 1901 to 2018

Improved simulations of streamflow and base flow for selected sites within and adjacent to the Mississippi River Alluvial Plain area are important for modeling groundwater flow because surface-water flows have a substantial effect on groundwater levels. One method for simulating streamflow and base flow, random forest (RF) models, was developed from the data at gaged sites and, in turn, was used to make monthly mean streamflow and base-flow predictions at 162 ungaged sites in the study area. Daily streamflow observations and computed base flow from 247 streamgages were used as the basis for the development of these RF models. RF models were constructed from basin and climatic characteristics and related to observed monthly mean streamflow values; models were used to compute monthly base-flow estimates from selected streamgages in and adjacent to the Mississippi River Alluvial Plain extent, which includes streamflows from parts of Alabama, Arkansas, Colorado, Florida, Illinois, Indiana, Kansas, Kentucky, Louisiana, Mississippi, Missouri, New Mexico, Tennessee, and Texas. The explanatory variables for the models were selected to represent physical characteristics and climatic time series for the contributing drainage basins to the streamgages and ungaged locations of interest. The Nash-Sutcliffe efficiency between observed and simulated monthly mean streamflow was greater than 0.80 for 155 of the 247 streamgages, with a median Nash-Sutcliffe efficiency value of 0.83. The streamflow and base-flow simulations can be used to improve inflow values and to verify the Mississippi River Alluvial Plain groundwater flow model. The statistical model, input data, and response data (simulated monthly mean streamflows) are available as a U.S. Geological Survey software release and a U.S. Geological Survey data release.

Alabama, Arkansas, Illinois, Kentucky, Louisiana, ↗

USGS2023

A model of transmissivity and hydraulic conductivity from electrical resistivity distribution derived from airborne electromagnetic surveys of the Mississippi River Valley Alluvial Aquifer, Midwest USA

Groundwater-flow models require the spatial distribution of the hydraulic conductivity parameter. One approach to defining this spatial distribution in groundwater-flow model grids is to map the electrical resistivity distribution by airborne electromagnetic (AEM) survey and establish a petrophysical relation between mean resistivity calculated as a nonlinear function of the resistivity layering and thicknesses of the layers and aquifer transmissivity compiled from historical aquifer tests completed within the AEM survey area. The petrophysical relation is used to transform AEM resistivity to transmissivity and to hydraulic conductivity over areas where the saturated thickness of the aquifer is known. The US Geological Survey applied this approach to a gain better understanding of the aquifer properties of the Mississippi River Valley alluvial aquifer. Alluvial-aquifer transmissivity data, compiled from 160 historical aquifer tests in the Mississippi Alluvial Plain (MAP), were correlated to mean resistivity calculated from 16,816 line-kilometers (km) of inverted resistivity soundings produced from a frequency-domain AEM survey of 95,000 km 2 of the MAP. Correlated data were used to define petrophysical relations between transmissivity and mean resistivity by omitting from the correlations the aquifer-test and AEM sounding data that were separated by distances greater than 1 km and manually calibrating the relation coefficients to slug-test data. The petrophysical relation yielding the minimum residual error between simulated and slug-test data was applied to 2,364 line-km of AEM soundings in the 1,000-km 2 Shellmound (Mississippi) study area to calculate hydraulic property distributions of the alluvial aquifer for use in future groundwater-flow models.

Mississippi River Valley Alluvial Aquifer↗

USGS2023

System-scale airborne electromagnetic surveys in the lower Mississippi River Valley support multidisciplinary applications

The lower Mississippi River Valley spans over 200,000 square kilometres in parts of seven states, encompassing areas of critical groundwater supplies, natural hazards, infrastructure, and low-lying coastal regions. From 2018 - 2022, the U.S. Geological Survey acquired over 82,000 line-kilometres of airborne electromagnetic, radiometric, and magnetic data over this region to provide comprehensive and systematic information about subsurface geologic and hydrologic properties that support multiple scientific and societal interests. Most of the data were acquired on a regional grid of west-east flight lines separated by 3 - 6 kilometres; however, several high-resolution inset grids with line spacing as close as 200 m were acquired in targeted areas of interest. Approximately 8,000 line-kilometres were acquired along streams and rivers to characterise the potential for surface water-groundwater connection, and another 6,000 line-kilometres were acquired along the Mississippi and Arkansas River levees to characterise this critical infrastructure. Here, we present a summary of the data along with several examples of how they are being used to inform regional groundwater model development, inferences of groundwater salinity, identification of faults in the New Madrid seismic zone, and levee infrastructure.

lower Mississippi River Valley↗

USGS2022

Evaluation of electrical and electromagnetic geophysical techniques to inspect earthen dam and levee structures in Arkansas

Within the state of Arkansas there is an increasing number of aging dams and levees that have little to no documentation concerning their construction or composition. Surface geophysical surveys offer a non-intrusive method for investigating these structures: To describe their lithologic makeup, to evaluate the materials that they were constructed upon, and to identify potential flow paths through them. Techniques such as electrical resistivity tomography, seismic refraction, and electromagnetic induction have all been used to image dams and levees and require additional information from geologic outcrops, geotechnical borings, or drill cores in order to make informed geologic interpretations of the geophysical models. These geologic models then allow the owners of these structures to make more informed decisions about their operation and maintenance. Between 2011 and 2018, the U.S. Geological Survey conducted geophysical and geotechnical investigations of three earthen structures within the state of Arkansas. Electrical and electromagnetic geophysical data were used to develop lithologic models of these structures and the underlying geology. Self-potential surveys were utilized to detect the movement of water through these structures indicating possible seepage pathways. Geotechnical methods such as electric and hydraulic direct-push well logs and cores acted as both a control on the geophysical interpretations and a confirmation of anomalies. This integrated approach detected the lack of an impermeable core within a levee, imaged a change in lithology of the bedrock forming the seal beneath a gravity dam, and identified a potential seepage feature within the core of an earthen dam. These results further support that this method of extending known lithologic features via surface and borehole geophysics is a useful approach for characterizing earthen water control structures.

Arkansas↗

USGS2021

Altitude of the potentiometric surface in the Mississippi River Valley alluvial aquifer, spring 2020

The purpose of this report is to present a potentiometric-surface map for the Mississippi River Valley alluvial aquifer (MRVA). The source data for the map were groundwater-altitude data from wells measured manually or continuously generally in spring 2020 and from the altitude of the top of the water surface measured generally on April 9, 2020, in rivers in the area.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

USGS2021

Airborne geophysical surveys of the lower Mississippi Valley demonstrate system-scale mapping of subsurface architecture

The Mississippi Alluvial Plain hosts one of the most prolific shallow aquifer systems in the United States but is experiencing chronic groundwater decline. The Reelfoot rift and New Madrid seismic zone underlie the region and represent an important and poorly understood seismic hazard. Despite its societal and economic importance, the shallow subsurface architecture has not been mapped with the spatial resolution needed for effective management. Here, we present airborne electromagnetic, magnetic, and radiometric observations, measured over more than 43,000 flight-line-kilometers, which collectively provide a system-scale snapshot of the entire region. We develop detailed maps of aquifer connectivity and shallow geologic structure, infer relationships between structure and groundwater age, and identify previously unseen paleochannels and shallow fault structures. This dataset demonstrates how regional-scale airborne geophysics can close a scale gap in Earth observation by providing observational data at suitable scales and resolutions to improve our understanding of subsurface structures.

Mississippi River Valley↗

USGS2020

Altitude of the potentiometric surface in the Mississippi River Valley alluvial aquifer, spring 2018

A potentiometric-surface map for spring 2018 was created for the Mississippi River Valley alluvial (MRVA) aquifer using available groundwater-altitude data from 1,126 wells completed in the MRVA aquifer and from the altitude of the top of the water surface in area rivers from 66 streamgages. Personnel from Arkansas Natural Resources Commission, Arkansas Department of Health, Arkansas Geological Survey, Illinois Department of Agriculture, Illinois State Water Survey, Louisiana Department of Natural Resources, Louisiana Department of Transportation and Development, Mississippi Department of Environmental Quality, Missouri Department of Natural Resources, Yazoo Mississippi Delta Joint Water Management District, U.S. Department of Agriculture-Natural Resources Conservation Service, and U.S. Geological Survey (USGS) routinely collect groundwater-level data from wells screened in the MRVA aquifer. The USGS and the U.S. Army Corps of Engineers routinely collect data on river stage and streamflow for the rivers overlying the MRVA aquifer area. The potentiometric-surface map for 2018 was created utilizing existing groundwater and surface-water altitudes to support investigations to characterize the MRVA aquifer as part of the USGS Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface of the MRVA aquifer for spring 2018 for about 87 percent of the aquifer area. The potentiometric contours ranged from 10 to 340 feet above North American Vertical Datum of 1988. The regional direction of groundwater flow was generally to the south-southwest, except in areas of groundwater-altitude depressions, where groundwater flowed into the depression, and near rivers, where flow can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions.

Mississippi River Valley alluvial aquifer↗

USGS2020

Hydrogeologic framework and simulation of predevelopment groundwater flow, eastern Abu Dhabi Emirate, United Arab Emirates

Groundwater in eastern Abu Dhabi in the United Arab Emirates is an important resource that is widely used for irrigation and domestic supplies in rural areas. The U.S. Geological Survey and the Environment Agency—Abu Dhabi cooperated on an investigation to integrate existing hydrogeologic information and to answer questions about regional groundwater resources in Abu Dhabi by developing a numerical groundwater flow model based on MODFLOW–2005 software. The groundwater flow model developed in this investigation provides an improved understanding of groundwater conditions in the eastern region of the Emirate of Abu Dhabi. The flow model simulates steady-state predevelopment conditions from before the rapid growth of modern pumping in the 1980s and was calibrated with 1,342 groundwater-level observations by use of automated and manual calibration techniques. The calibrated model provides good accuracy, with a mean error of 0.50 meters and a standard error of 5.92 meters for simulated groundwater levels. The results of the regional water budget simulation show that gap recharge, which is groundwater inflow through mountain-front gap alluvium, is the greatest source of water to the aquifer. In the base simulation scenario, gap recharge represents 80 percent of total inflow (119,470 of 149,403 cubic meters per day) and the greatest outflow from the aquifer is from evapotranspiration (93 percent of total outflow). Model scenario and sensitivity results reveal a need for data that more thoroughly and more accurately describe aquifer hydraulic conductivity, inflow to the aquifer from the Oman Mountains, and recharge from precipitation on the piedmont. Additional long-term aquifer pumping test observations would improve understanding of aquifer hydraulic conductivity, which would also improve model accuracy. Future studies can modify the model to understand the effect of land-use change and water use on groundwater supplies and simulate more complex groundwater flow conditions in a predictive mode.

Scientific Investigations Report↗

USGS2020

High-resolution airborne geophysical survey of the Shellmound, Mississippi area

In late February to early March 2018, the U.S. Geological Survey acquired 2,364 line-kilometers (km) of airborne electromagnetic, magnetic, and radiometric data in the Shellmound, Mississippi study area. The purpose of this survey is to contribute high-resolution information about subsurface geologic structure to inform groundwater models, water resource infrastructure studies, and local decision making. The Shellmound region hosts a managed aquifer recharge (MAR) pilot project, developed by the Agricultural Research Service of the U.S. Department of Agriculture. The MAR pilot project is investigating the use of bank filtration along the Tallahatchie River as a source for recharge in areas of significant groundwater decline. Direct injection into the Mississippi River Valley Alluvial aquifer (MRVA) occurs about 3 km from the extraction gallery. Understanding the structure of the aquifer, including both shallow and deep confining units, is important for the success of this pilot MAR study and may be even more important for potential future large-scale MAR projects and groundwater model development efforts.

Mississippi↗

USGS2020

Methods to quality assure, plot, summarize, interpolate, and extend groundwater-level information—Examples for the Mississippi River Valley alluvial aquifer

Large-scale computational investigations of groundwater levels are proposed to accelerate science delivery through a workflow spanning database assembly, statistics, and information synthesis and packaging. A water-availability study of the Mississippi River alluvial plain, and particularly the Mississippi River Valley alluvial aquifer (MRVA), is ongoing. Software (visGWDBmrva) has been released as part of the study that demonstrates groundwater informatics for the aquifer. Considerable water-level data collected by multiple agencies over a seven-state area exist (18,903 wells; 287,272 measurements [April 22, 2019]). Data and metadata quality assurance methods, basic statistics, hydrograph visualization, outlier identification, hypothesis testing, and time-series modeling are described. Two approaches (generalized additive models [GAMs] and support vector machines [SVMs]) are used for data interpolation and extension to monthly water-level estimates. Numerical congruence between GAM and SVM estimates will be useful to limit inclusion of monthly estimates from subsequent science activities.

Mississippi River valley↗

USGS2020

Characterizing the diverse hydrogeology underlying rivers and estuaries using new floating transient electromagnetic methodology

The hydrogeology below large surface water features such as rivers and estuaries is universally under-informed at the long reach to basin scales (tens of km+). This challenge inhibits the accurate modeling of fresh/saline groundwater interfaces and groundwater/surface water exchange patterns at management-relevant spatial extents. Here we introduce a towed, floating transient electromagnetic (TEM) system (i.e. FloaTEM) for rapid (up to 15 km/h) high resolution electrical mapping of the subsurface below large water bodies to depths often a factor of 10 greater than other towed instruments. The novel FloaTEM system is demonstrated at a range of diverse 4th through 6th-order riverine settings across the United States including 1) the Farmington River, near Hartford, Connecticut; 2) the Upper Delaware River near Barryville, New York; 3) the Tallahatchie River near Shellmound, Mississippi; and, 4) the Eel River estuary, on Cape Cod, near Falmouth, Massachusetts. Airborne frequency-domain electromagnetic and land-based towed TEM data are also compared at the Tallahatchie River site, and streambed geologic scenarios are explored with forward modeling. A range of geologic structures and pore water salinity interfaces were identified. Process-based interpretation of the case study data indicated FloaTEM can resolve varied sediment-water interface materials, such as the accumulation of fines at the bottom of a reservoir and permeable sand/gravel riverbed sediments that focus groundwater discharge. Bedrock layers were mapped at several sites, and aquifer confining units were defined at comparable resolution to airborne methods. Terrestrial fresh groundwater discharge with flowpaths extending hundreds of meters from shore was also imaged below the Eel River estuary, improving on previous hydrogeological characterizations of that nutrient-rich coastal exchange zone. In summary, the novel FloaTEM system fills a critical gap in our ability to characterize the hydrogeology below surface water features and will support more accurate prediction of groundwater/surface water exchange dynamics and fresh-saline groundwater interfaces.

Science of the Total Environment↗