Geology Reports⌕ Search

Geology topics

W. D. Menzie

Publications and source records attributed to W. D. Menzie.

At least 19 recordsLinked to original sources
USGS2010

The global flow of aluminum from 2006 through 2025

This report presents results of an investigation of the global flow of materials related to the production and use of aluminum in 2006 and makes projections to 2025. The report was prepared in cooperation with the U.S. Environmental Protection Agency for the Organisation for Economic Co-operation and Development, Environmental Policy Committee's Working Group on Waste Prevention and Recycling. The report addresses the major resource flows and effects of those flows and provides insights on the life cycle of aluminum; it does not address policy issues related to the production and use of aluminum.

Open-File Report↗
USGS2008

Map scale effects on estimating the number of undiscovered mineral deposits

Estimates of numbers of undiscovered mineral deposits, fundamental to assessing mineral resources, are affected by map scale. Where consistently defined deposits of a particular type are estimated, spatial and frequency distributions of deposits are linked in that some frequency distributions can be generated by processes randomly in space whereas others are generated by processes suggesting clustering in space. Possible spatial distributions of mineral deposits and their related frequency distributions are affected by map scale and associated inclusions of non-permissive or covered geological settings. More generalized map scales are more likely to cause inclusion of geologic settings that are not really permissive for the deposit type, or that include unreported cover over permissive areas, resulting in the appearance of deposit clustering. Thus, overly generalized map scales can cause deposits to appear clustered. We propose a model that captures the effects of map scale and the related inclusion of non-permissive geologic settings on numbers of deposits estimates, the zero-inflated Poisson distribution. Effects of map scale as represented by the zero-inflated Poisson distribution suggest that the appearance of deposit clustering should diminish as mapping becomes more detailed because the number of inflated zeros would decrease with more detailed maps. Based on observed worldwide relationships between map scale and areas permissive for deposit types, mapping at a scale with twice the detail should cut permissive area size of a porphyry copper tract to 29% and a volcanic-hosted massive sulfide tract to 50% of their original sizes. Thus some direct benefits of mapping an area at a more detailed scale are indicated by significant reductions in areas permissive for deposit types, increased deposit density and, as a consequence, reduced uncertainty in the estimate of number of undiscovered deposits. Exploration enterprises benefit from reduced areas requiring detailed and expensive exploration, and land-use planners benefit from reduced areas of concern. ?? 2008 International Association for Mathematical Geology.

Natural Resources Research↗
USGS2006

Effects of Chinese mineral strategies on the U.S. minerals industry

For more than two decades now, China has been undergoing rapid economic growth and industrialization. The industrialization and urbanization of the once rural, farming nation is leading to increased consumption of mineral commodities to build infrastructure and to make into consumer goods. This increased consumption has led to higher mineral prices, lower stocks and, in some cases, temporary shortages of minerals. Chinese mineral producers and manufacturers are responding by building capacity, restructuring and modernizing industrial sectors and establishing international network that compete with those of the United States and other nations.

Mining Engineering↗
USGS2005

Statistical guides to estimating the number of undiscovered mineral deposits: an example with porphyry copper deposits

Estimating numbers of undiscovered mineral deposits is a fundamental part of assessing mineral resources. Some statistical tools can act as guides to low variance, unbiased estimates of the number of deposits. The primary guide is that the estimates must be consistent with the grade and tonnage models. Another statistical guide is the deposit density (i.e., the number of deposits per unit area of permissive rock in well-explored control areas). Preliminary estimates and confidence limits of the number of undiscovered deposits in a tract of given area may be calculated using linear regression and refined using frequency distributions with appropriate parameters. A Poisson distribution leads to estimates having lower relative variances than the regression estimates and implies a random distribution of deposits. Coefficients of variation are used to compare uncertainties of negative binomial, Poisson, or MARK3 empirical distributions that have the same expected number of deposits as the deposit density. Statistical guides presented here allow simple yet robust estimation of the number of undiscovered deposits in permissive terranes.

Conference Paper↗
USGS2004

Recycling of construction debris as aggregate in the Mid-Atlantic Region, USA

Reclaimed asphalt pavement (RAP) and portland cement concrete (RPCC) are abundant and available substitutes for natural aggregate in many areas. This paper presents an overview of factors that affect recycled aggregate cost, availability, and engineering performance, and the results of a survey of business practices in the Mid-Atlantic region. For RAP, processing costs are less than those for virgin natural aggregate. Use of efficient asphalt pavement stripping technology, on-site reclamation, and linked two-way transport of asphalt debris and processed asphalt paving mix between asphalt mix plants and paving sites has led to extensive recycling of asphalt pavement in the Mid-Atlantic region of the US. Most of the sites that recycle asphalt pavement (RAP) are located in or near urban areas close to important transportation corridors. RPCC is a viable aggregate source in urban settings where unit costs for processed aggregate from RPCC and natural aggregate are comparable. Disposal fees charged at RPCC recycling sites help defray processing costs and the significantly lower tipping fees at recycling sites versus landfill disposal sites encourage recycling of construction debris as aggregate. Construction contractors and construction debris recycling centers, many of which have the ability to crush and process concrete debris at the job site, produce most RPCC. Production of RPCC aggregate from construction debris that is processed on site using portable equipment moved to the construction site eliminates transportation costs for aggregate and provides an economic incentive for RPCC use. Processing costs, quality and performance issues, and lack of large quantities where needed limit RPCC use. Most RPCC suppliers in the Mid-Atlantic area are located in counties with population densities greater than 400 people/km2 (1036 people/mile2) and that have high unit-value costs and limited local availability of natural aggregate. ?? 2004 Published by Elsevier B.V.

Conference Paper↗
USGS1993

Is there a metric for mineral deposit occurrence probabilities?

Traditionally, mineral resource assessments have been used to estimate the physical inventory of critical and strategic mineral commodities that occur in pieces of land and to assess the consequences of supply disruptions of these commodities. More recently, these assessments have been used to estimate the undiscovered mineral wealth in such pieces of land to assess the opportunity cost of using the land for purposes other than mineral production. The field of mineral resource assessment is an interdisciplinary field that draws elements from the disciplines of geology, economic geology (descriptive models), statistics and management science (grade and tonnage models), mineral economics, and operations research (computer simulation models). The purpose of this study is to assert that an occurrenceprobability metric exists that is useful in "filling out" an assessment both for areas in which only a trivial probability exists that a new mining district could be present and for areas where nontrivial probabilities exist for such districts. ?? 1993 Oxford University Press.

Nonrenewable Resources↗
USGS1992

Computer Monte Carlo simulation in quantitative resource estimation

The method of making quantitative assessments of mineral resources sufficiently detailed for economic analysis is outlined in three steps. The steps are (1) determination of types of deposits that may be present in an area, (2) estimation of the numbers of deposits of the permissible deposit types, and (3) combination by Monte Carlo simulation of the estimated numbers of deposits with the historical grades and tonnages of these deposits to produce a probability distribution of the quantities of contained metal. Two examples of the estimation of the number of deposits (step 2) are given. The first example is for mercury deposits in southwestern Alaska and the second is for lode tin deposits in the Seward Peninsula. The flow of the Monte Carlo simulation program is presented with particular attention to the dependencies between grades and tonnages of deposits and between grades of different metals in the same deposit. ?? 1992 Oxford University Press.

Nonrenewable Resources↗
USGS1989

Undiscovered lode tin resources of the Seward Peninsula, Alaska

The United States is a net importer of many important minerals, including tin. Consumption of primary tin in the United States is about 36,000 metric tons per year. Identified U.S. tin resources consist of about 40,000 metric tons. Although such figures provide insight about vulnerability to supply disruptions in the short term, they do not provide information about the potential of a country to meet its needs for a commodity from undiscovered domestic sources. Recent developments, including the preparation of models of mineral deposits and their grades and tonnages, and the application of computer simulation techniques to the estimation of metallic mineral resources, make it possible to estimate the magnitude of undiscovered resources, by deposit type, for relatively small areas such as the Seward Peninsula. This paper uses these developments and geophysical data to estimate undiscovered lode tin resources on the Seward Peninsula of Alaska. The assessment is based on a three-step methodology that (1) identifies the types of tin deposits that may be present in the region, (2) identifies the geophysical characteristics of unroofed granites and shallow granitoids, and (3) estimates, on the basis of various combinations of geologic and geophysical conditions, the number of undiscovered deposits present within or near exposed or concealed granite plutons. Computer simulation was used to combine the estimates of the number of deposits with available grade and tonnage models. Simulation experiments were designed to estimate the amount of tin in undiscovered deposits under a variety of limiting conditions. Results of simulation experiments indicate there is a 90 percent chance that the Seward Peninsula contains at least 51,000 metric tons, a 50 percent chance that it contains at least 390,000 metric tons, and a 10 percent chance it contains at least 1,100,000 metric tons of tin in undiscovered greisen, vein, and replacement deposits that have average grades of at least 0.5 percent tin.

Economic Geology↗
USGS1988

Models of grades and tonnages of some lode tin deposits

Descriptive and grade/tonnage models have recently been built for many types of deposits. Such models consist of descriptions of mineralogy, host rocks, ore textures, controls, alteration, geochemical signatures, age, and tectonic settings, together with statistical models of grades, tonnages, and contained metal of deposits of each type. The models are used to identify areas that may contain undiscovered deposits of given types, to convey to non-geologists an idea of the importance of such deposits, and to test and refine classifications of mineral deposits. Descriptive and grade/tonnage models have recently been built for five types of primary tin deposits: rhyolite-hosted such as in Mexico; hydrothermal lodes such as in Cornwall, England, and the Herberton district, Queensland; replacement (or exhalative?) such as Renison Bell, Tasmania; skarn such as at Lost River, Alaska; and greisen such as in the Erzgebirge. Analyses of frequency distributions of tonnage, contained metal, tin grades and the relationships between these variables show that the deposits fall into four well-defined domains that have definite geological characteristics. Rhyolite-hosted, or Mexican, deposits contain a median of 4 t of tin and have a median grade of 0.4% Sn. Hydrothermal lode deposits have the highest grades. Half of such deposits have grades over 1.0% Sn, and the majority contain more than 1,000 t Sn. Large hydrothermal vein deposits contain more than 50,000 t Sn. Replacement (or exhalative?) deposits contain the largest amount of tin (median = 40,000 t). They are only of slightly lower grade (median = 0.80% Sn) than the hydrothermal lodes. Greisen or stockwork deposits have larger tonnages than replacement deposits, but contain less tin (median = 25,000 t).They are also of much lower grade (median = 0.3% Sn). Though grades and tonnages are available for only four skarn deposits, they appear to be more like greisen deposits than replacement deposits when compared using grades, tonnage and contained tin. Although these individual models of primary tin deposits must be regarded as preliminary because of the relatively small number of deposits upon which they are built, they clearly demonstrate differences among types and provide basic information that can be useful in making decisions about exploration strategy, land classification, and tin supply.

Book chapter↗
USGS1987

The Alaska Mineral Resource Assessment Program: Background information to accompany folio of geologic and mineral resource maps of the Circle quadrangle, Alaska

The geology, geochemistry, geophysics, and Landsat imagery of the Circle quadrangle were investigated by an interdisciplinary research team for the purpose of assessing the mineral potential of the area. The quadrangle covers approximately 15,765 km 2 in east-central Alaska; most of it is included in the mountainous Yukon-Tanana Upland physiographic division, but the northernmost part is in the low-lying Yukon Flats section. The Circle mining district, in the east-central part of the quadrangle, has been a major producing area of placer gold since its discovery in 1893. For descriptive purposes, the Circle quadrangle is divided into three areas: the northwest Circle quadrangle, the area north of the Tintina fault zone, and the area south of the Tintina fault zone. The Tintina fault zone extends northwesterly through the northern part of the quadrangle. The northwest Circle quadrangle contains mostly folded and faulted, slightly metamorphosed sedimentary rocks that are intruded by Tertiary granitic plutons. In the northern part of the area north of the Tintina fault zone (Little Crazy Mountains and northern east Crazy Mountains), the rocks consist primarily of the gabbro and basalt of the Circle Volcanics and minor associated chert, graywacke, and limestone. Elsewhere in this area (south of the Circle Volcanics and in the western Crazy Mountains), the rocks are mostly slightly metamorphosed Paleozoic sedimentary rocks that have been folded and faulted. Rocks in the largest part of the quadrangle, the area south of the Tintina fault zone, consist largely of pelitic rocks that are regionally metamorphosed to greenschist and amphibolite facies. Felsic plutons, mostly Tertiary in age, occur throughout the area. The metamorphic rocks are separated from sedimentary rocks on the northwest by thrust faulting. The aeromagnetic and gravity data show clear differences between the areas north and south of the Tintina fault zone. The metamorphic terrane to the south has low overall gravity and local gravity lows over exposed granitic plutons. It is hypothesized that magnetic chlorite schist infolded with nonmagnetic quartzite and schist account for east-northeast-trending magnetic highs that approximately parallel the regional strike of the most prominent foliation in the metamorphic rocks. North of the Tintina fault zone, the Circle Volcanics are characterized by high gravity and east-west-trending magnetic highs. The Tintina fault zone has an intense magnetic high near the western margin of the Circle quadrangle overlying the magnetic granodiorite of the Victoria Mountain pluton. A magnetic high near Circle Hot Springs is less intense, but broader, and could reflect a buried magnetic pluton similar to that of the Victoria Mountain pluton. Computer-enhanced Landsat images of the Circle quadrangle show trends and patterns of concentrations of linear features. Features trending northeast-southwest predominate throughout the quadrangle; northwest-southeast-trending linear features are found mostly south of the Tintina fault zone. High concentrations of linear features were not found to correspond to areas of known mineralization in any consistent or significant way that could presently be used in locating areas of mineralization. Geochemical and mineralogical studies of stream sediment and heavy-mineral concentrates from the Circle quadrangle identify areas of anomalous concentrations of metallic elements, including gold, silver, tin, tungsten, lead, antimony, zinc, thorium, uranium, and beryllium. The data delineate areas of known mineral occurrences and areas that may contain undiscovered mineral resources. To date, placer gold has been the only significant metallic mineral resource from the Circle quadrangle, but the general geologic setting, especially the presence of post-orogenic plutons, is similar to that of regions that contain tin greisen deposits, tungsten skarn deposits, lode gold deposits in metasedimentary rocks, and uranium vein deposits. Six areas or tracts were identified in which such deposits might occur, and two more tracts were delineated as possible for the occurrence of shale-hosted Lead-zinc deposits. The discovery of two diamonds in the gravels of Cooked Creek point to the slight possibility of finding placer or lode diamond deposits. Although most of the past and present gold mining has taken place in four areas in the quadrangle, a sedimentary basin near the town of Central was identified as possibly containing buried placer gold deposits or sedimentary uranium deposits.

Alaska↗
USGS1987

CHANGES IN GRADE, VOLUME AND CONTAINED GOLD DURING THE MINING LIFE-CYCLE OF GOLD PLACER DEPOSITS.

Analysis of gold placer data throughout the world suggests that gold grades and volumes cannot be used to distinguish between most types of gold placers. Only the alluvial plain and fan placers are significantly different among the types of gold placers considered. Gold grades and volumes change when working placers go from small-volume methods to large-volume methods. The odds that a placer will be dominantly worked using small-volume methods at the surface are about 5:3. Once small-volume mining has occurred, the odds against subsequent large-volume mining are about 4:1. If a deposit is suitable for large-volume mining and the amount of gold produced from small-volume mining was reported, an estimate of the remaining gold (log//1//0kg) can be made using an equation.

CIM Bulletin↗