Geology Reports⌕ Search

Geology topics

Vernon Emanuel Swanson

Publications and source records attributed to Vernon Emanuel Swanson.

12 recordsLinked to original sources
USGS1976

Guidelines for sample collecting and analytical methods used in the U.S. Geological Survey for determining chemical composition of coal

This report is intended to meet the many requests for information on current U.S. Geological Survey procedures in handling coal samples. In general, the exact type and number of samples of coal and associated rock to be collected are left to the best judgment of the geologist. Samples should be of unweathered coal or rock and representative of the bed or beds sampled; it is recommended that two channel samples, separated by 10 to 100 yards (10 to 100 metres) and weighing 4 to 5 pounds ( 1.8 to 2.3 kilograms) each, be collected of each 5 feet ( 1.5 metres) of vertical section. Care must be taken to avoid any sample contamination, and to record the exact locality, thickness, and stratigraphic information for each sample. Analytical methods are described for the determination of major, minor, and trace elements in coal. Hg, As, Sb, F, Se, U, and Th are determined in the raw coal, and the following 34 elements are determined after ashing the coal: Si, Al, Ca, Mg, Na, K, Fe (total), Cl, Ti, Mn, P, S (total), Cd, Li, Cu, Zn, Pb, B, Ba, Be, Co, Cr, Ga, La, Mo, Nb, Ni, Sc, Sr, Ti, V, Y, Yb, and Zr. The methods used to determine these elements include atomic absorption spectroscopy, X-ray fluorescence spectroscopy, optical emission spectroscopy, spectrophotometry, selective-ion electrode, and neutron activation analysis. A split of representative coal samples is submitted to the U.S. Bureau of Mines for proximate, ultimate, forms of sulfur, and Btu determinations.

Circular↗
USGS1974

Recommendations for the study and appraisal of oil-shale deposits in Jordan

A geologic-geochemical evaluation conducted October 5-24, 1968, both in the field area and in the laboratories has shown the Upper Cretaceous oil shale in the El Lajjun area of central Jordan to be one of Jordan's major natural mineral resources. Continued but slightly modified investigations are strongly recommended to determine the exact volume and quality of this oil shale. Further, a study to determine the most efficient processes of extraction of the oil and possible co-products should be initiated. The economic potential of the oil shale is excellent, but the actual exploitation of this rock will depend on national economic and political factors that cannot be interpreted at this time. From a realistic point of view, regardless of these factors which inevitably change with time, systematic investigations and planning for construction of extraction plants for domestic production of fuel and/or other products from the oil shale should be completed at the earliest possible date, to assure rapid utilization of this mineral resource when necessary.

Open-File Report↗