Geology topics

Tyler C. Ladinsky

Publications and source records attributed to Tyler C. Ladinsky.

5 recordsLinked to original sources

USGS2020

Documentation of Surface Fault Rupture and Ground‐Deformation Features Produced by the 4 and 5 July 2019 Mw 6.4 and Mw 7.1 Ridgecrest Earthquake Sequence

The M w "> M w Mw 6.4 and M w "> M w Mw 7.1 Ridgecrest earthquake sequence occurred on 4 and 5 July 2019 within the eastern California shear zone of southern California. Both events produced extensive surface faulting and ground deformation within Indian Wells Valley and Searles Valley. In the weeks following the earthquakes, more than six dozen scientists from government, academia, and the private sector carefully documented the surface faulting and ground‐deformation features. As of December 2019, we have compiled a total of more than 6000 ground observations; approximately 1500 of these simply note the presence or absence of fault rupture or ground failure, but the remainder include detailed descriptions and other documentation, including tens of thousands of photographs. More than 1100 of these observations also include quantitative field measurements of displacement sense and magnitude. These field observations were supplemented by mapping of fault rupture and ground‐deformation features directly in the field as well as by interpreting the location and extent of surface faulting and ground deformation from optical imagery and geodetic image products. We identified greater than 68 km of fault rupture produced by both earthquakes as well as numerous sites of ground deformation resulting from liquefaction or slope failure. These observations comprise a dataset that is fundamental to understanding the processes that controlled this earthquake sequence and for improving earthquake hazard estimates in the region. This article documents the types of data collected during postearthquake field investigations, the compilation effort, and the digital data products resulting from these efforts.

California↗

USGS2020

Evidence of previous faulting along the 2019 Ridgecrest, California earthquake ruptures

The July 2019 Ridgecrest earthquake sequence in southeastern California was characterized as surprising because only ~35% of the rupture occurred on previously mapped faults. Employing more detailed inspection of pre-event high-resolution topography and imagery in combination with field observations, we document evidence of active faulting in the landscape along the entire fault system. Scarps, deflected drainages, and lineaments and contrasts in topography, vegetation, and ground color demonstrate previous slip on a dense network of orthogonal faults, consistent with patterns of surface rupture observed in 2019. Not all of these newly mapped fault strands ruptured in 2019. Outcrop-scale field observations additionally reveal tufa lineaments and sheared Quaternary deposits. Neotectonic features are commonly short (<2 km), discontinuous, and display en echelon patterns along both the M 6.4 and M 7.1 ruptures. These features are generally more prominent and better preserved outside the late Pleistocene lake basins. Fault expression may also be related to deformation style: scarps and topographic lineaments are more prevalent in areas where substantial vertical motion occurred in 2019. Where strike-slip displacement dominated in 2019, the faults are mainly expressed by less prominent tonal and vegetation features. Both the NE- and NW-trending active fault systems are subparallel to regional bedrock fabrics that were established as early as ~150 Ma, and may be reactivating these older structures. Overall, we estimate that 50-70% (i.e., an additional 15-35%) of the 2019 surface ruptures could have been recognized as active faults with detailed inspection of pre-event data. Similar detailed mapping of potential neotectonic features could help improve seismic hazard analyses in other regions of eastern California and elsewhere that have distributed faulting or incompletely mapped faults. In areas where faults cannot be resolved as single thoroughgoing structures, a zone of potential faulting should be used as a hazard model input.

California↗

USGS2020

Surface displacement distributions for the July 2019 Ridgecrest, California earthquake ruptures

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the M w "> M w 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the M w "> M w 7.1 mainshock. We present > 650 "> > 650 field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the M w "> M w 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The M w "> M w 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the M w "> M w 7.1 rupture. The M w "> M w 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The M w "> M w 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the M w "> M w 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the M w "> M w 7.1 rupture. The steepest gradients ( ⁠ ∼ 1 – 3    m / km "> ∼ 1 – 3 m / km ⁠ ) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 M w "> M w 7.3 Landers and 1999 M w "> M w 7.1 Hector Mine earthquakes are < 0.6    m / km "> < 0.6 m / km . Our displacement distributions are important for understanding the influence of cross‐fault rupture on M w "> M w 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

California↗

USGS2020

Near-field ground motions from the July, 2019 Ridgecrest, California, earthquake sequence

The 2019 Ridgecrest, California, earthquake sequence, including an Mw 6.4 event on 4 July and an Mw 7.1 approximately 34 hr later, was recorded by 15 instruments within 55 km nearest‐fault distance. To characterize and explore near‐field ground motions from the Mw 6.4 foreshock and Mw 7.1 mainshock, we augment these records with available macroseismic information, including conventional intensities and displaced rocks. We conclude that near‐field shaking intensities were generally below modified Mercalli intensity 9, with concentrations of locally high values toward the northern and southern termini of the mainshock rupture. We further show that, relative to near‐field ground motions at hard‐rock sites, instrumental ground motions at alluvial near‐field sites for both the Mw 6.4 foreshock and Mw 7.1 mainshock were depleted in energy at frequencies higher than 2–3 Hz, as expected from ground‐motion models. Both the macroseismic and instrumental observations suggest that sediments in the Indian Wells Valley experienced a pervasively nonlinear response, which helps explain why shaking intensities and damage in the closest population center, Ridgecrest, were relatively modest given its proximity to the earthquakes.

California↗

USGS2017

The story of a Yakima fold and how it informs Late Neogene and Quaternary backarc deformation in the Cascadia subduction zone, Manastash anticline, Washington, USA

The Yakima folds of central Washington, USA, are prominent anticlines that are the primary tectonic features of the backarc of the northern Cascadia subduction zone. What accounts for their topographic expression and how much strain do they accommodate and over what time period? We investigate Manastash anticline, a north vergent fault propagation fold typical of structures in the fold province. From retrodeformation of line- and area-balanced cross sections, the crust has horizontally shortened by 11% (0.8–0.9 km). The fold, and by inference all other folds in the fold province, formed no earlier than 15.6 Ma as they developed on a landscape that was reset to negligible relief following voluminous outpouring of Grande Ronde Basalt. Deformation is accommodated on two fault sets including west-northwest striking frontal thrust faults and shorter north to northeast striking faults. The frontal thrust fault system is active with late Quaternary scarps at the base of the range front. The fault-cored Manastash anticline terminates to the east at the Naneum anticline and fault; activity on the north trending Naneum structures predates emplacement of the Grande Ronde Basalt. The west trending Yakima folds and west striking thrust faults, the shorter north to northeast striking faults, and the Naneum fault together constitute the tectonic structures that accommodate deformation in the low strain rate environment in the backarc of the Cascadia Subduction Zone.

Washington↗