Geology topics

Thorvaldur Thordarson

Publications and source records attributed to Thorvaldur Thordarson.

7 recordsLinked to original sources

USGS2026

Dynamic coupling between faulting, rifting and magmatism during 2021-2025 unrest on Reykjanes Peninsula, Iceland

Interactions among faulting, earthquakes, and eruptions are fundamental to plate tectonics and hazard forecasting yet rarely observed along mid-ocean ridges. On Iceland's Reykjanes Peninsula, seismotectonic–volcanic unrest resumed after nearly 800-year hiatus, providing an opportunity to observe these interactions during 2021–2025 activity. By integrating high-resolution seismicity, focal mechanisms, satellite geodesy, surface deformation, and eruption data, we document ∼4 m of total extension accommodated through 14 rifting episodes. The largest, in 2023, involved graben reactivation and diking, with seismic swarms and earthquake faulting that matched the surface ruptures, where strike-slip faulting preceded normal-faulting earthquakes and extension. The accrued extension was released by extension fractures triggered by magma accumulation. Long-term observations show no correlation between erupted magma volume, seismicity, and crustal extension. This highlights dynamic relation between rifting, faulting, and magmatism in transtensional settings and their implications for hazard assessment.

Reykjanes Peninsula↗

USGS2025

Complex staged emplacement of a basaltic lava: The example of the July 1974 flow of Kīlauea

Basaltic lava flows can be highly destructive. Forecasting the future path and/or behavior of an active lava flow is challenging because topography is often poorly constrained and lava has a complex rheology and emplacement history. Preserved lavas are an important source of information which, combined with observations of active flows, underpins conceptual models of lava flow emplacement. However, the value of preserved lavas is limited because pre-eruptive topography and, thus, syn-eruptive lava flow geometry are usually not known. Here, we use tree-mold data to constrain pre-eruptive topography and syn-eruptive lava flow geometry of the July 1974 flow of Kīlauea (USA). Tree molds, which are formed after advancing lava encloses standing trees, preserve the lava inundation height and the final preserved thickness of lava. We used data from 282 tree molds to reconstruct the temporal and spatial evolution of the ~ 2.1 km-long July 1974 flow. The tree mold dataset yields a detailed dynamic picture of staged emplacement, separated by intervals of ponding. In some ponded areas, flow depth during emplacement (~ 5 m) was twice the preserved thickness of the final lava (2–3 m). Drainage of the ponds led to episodic surges in flow advancement, decoupled from fluctuations in vent discharge rate. We infer that the final breakout occurred after the cessation of fountaining. Such complex emplacement histories may be common for pāhoehoe lavas at Kīlauea and elsewhere in situations where the terrain is of variable slope, and/or where lava is temporarily perched and stored.

Hawaii↗

USGS2022

Flood lavas on Earth, Io and Mars

Flood lavas are major geological features on all the major rocky planetary bodies. They provide important insight into the dynamics and chemistry of the interior of these bodies. On the Earth, they appear to be associated with major and mass extinction events. It is therefore not surprising that there has been significant research on flood lavas in recent years. Initial models suggested eruption durations of days and volumetric fluxes of order 10 7 m 3 s −1 with flows moving as turbulent floods. However, our understanding of how lava flows can be emplaced under an insulating crust was revolutionized by the observations of actively inflating pahoehoe flows in Hawaii. These new ideas led to the hypothesis that flood lavas were emplaced over many years with eruption rates of the order of 10 4 m 3 s −1 . The field evidence indicates that flood lava flows in the Columbia River Basalts, Deccan Traps, Etendeka lavas, and the Kerguelen Plateau were emplaced as inflated pahoehoe sheet flows. This was reinforced by the observation of active lava flows of ≥100 km length on Io being formed as tube-fed flows fed by moderate eruption rates (10 2 –10 3 m 3 s −1 ). More recently it has been found that some flood lavas are also emplaced in a more rapid manner. New high-resolution images from Mars revealed ‘platy–ridged’ flood lava flows, named after the large rafted plates and ridges formed by compression of the flow top. A search for appropriate terrestrial analogues found an excellent example in Iceland: the 1783–1784 Laki Flow Field. The brecciated Laki flow top consists of pieces of pahoehoe, not aa clinker, leading us to call this ‘rubbly pahoehoe’. Similar flows have been found in the Columbia River Basalts and the Kerguelen Plateau. We hypothesize that these flows form with a thick, insulating, but mobile crust, which is disrupted when surges in the erupted flux are too large to maintain the normal pahoehoe mode of emplacement. Flood lavas emplaced in this manner could have (intermittently) reached effusion rates of the order of 10 6 m 3 s −1 .

Journal of the Geological Society↗

USGS2020

Lava–water interaction and hydrothermal activity within the 2014–2015 Holuhraun Lava Flow Field, Iceland

Lava that erupted during the 2014–2015 Holuhraun eruption in Iceland flowed into a proglacial river system, resulting in aqueous cooling of the lava and an ephemeral hydrothermal system. We carried out a monitoring study of this system from 2015 to 2018 to document the cooling of the lava over this time, using thermocouple measurements and data-logging sensors. The heat loss rate from advection through this hydrothermal system in August 2015 was ~5.5 × 10 8 W; since eruption, aqueous cooling likely accounted for ~1% of the total heat loss from the lava. This estimate excludes steam losses from fumaroles as well as any groundwater that was not released to the surface, and thus is a lower bound. Near the terminus of the flow, advection of heat by flowing water may have locally accounted for tens of percent of the total cooling of that part of the flow. Our data quantify the importance of water cooling for this lava flow and can be compared with models to better understand lava–water interactions more generally. We also provide detailed methods for simple, low-cost monitoring of similar instances in the future.

Holuhraun Lava Flow Field↗

USGS2017

Assessment of the potential respiratory hazard of volcanic ash from future Icelandic eruptions: A study of archived basaltic to rhyolitic ash samples

Background The eruptions of Eyjafjallajökull (2010) and Grímsvötn (2011), Iceland, triggered immediate, international consideration of the respiratory health hazard of inhaling volcanic ash, and prompted the need to estimate the potential hazard posed by future eruptions of Iceland’s volcanoes to Icelandic and Northern European populations. Methods A physicochemical characterization and toxicological assessment was conducted on a suite of archived ash samples spanning the spectrum of past eruptions (basaltic to rhyolitic magmatic composition) of Icelandic volcanoes following a protocol specifically designed by the International Volcanic Health Hazard Network. Results Icelandic ash can be of a respirable size (up to 11.3 vol.% < 4 μm), but the samples did not display physicochemical characteristics of pathogenic particulate in terms of composition or morphology. Ash particles were generally angular, being composed of fragmented glass and crystals. Few fiber-like particles were observed, but those present comprised glass or sodium oxides, and are not related to pathogenic natural fibers, like asbestos or fibrous zeolites, thereby limiting concern of associated respiratory diseases. None of the samples contained cristobalite or tridymite, and only one sample contained quartz, minerals of interest due to the potential to cause silicosis. Sample surface areas are low, ranging from 0.4 to 1.6 m2 g−1, which aligns with analyses on ash from other eruptions worldwide. All samples generated a low level of hydroxyl radicals (HO•), a measure of surface reactivity, through the iron-catalyzed Fenton reaction compared to concurrently analyzed comparative samples. However, radical generation increased after ‘refreshing’ sample surfaces, indicating that newly erupted samples may display higher reactivity. A composition-dependent range of available surface iron was measured after a 7-day incubation, from 22.5 to 315.7 μmol m−2, with mafic samples releasing more iron than silicic samples. All samples were non-reactive in a test of red blood cell-membrane damage. Conclusions The primary particle-specific concern is the potential for future eruptions of Iceland’s volcanoes to generate fine, respirable material and, thus, to increase ambient PM concentrations. This particularly applies to highly explosive silicic eruptions, but can also hold true for explosive basaltic eruptions or discrete events associated with basaltic fissure eruptions.

Environmental Health↗

USGS2009

Floods of water and lava in the Columbia River Basin: Analogs for Mars

The Columbia River Basin (CRB) is home to the best studied examples of two of the most spectacular geologic processes on Earth and Mars: flood volcanism and catastrophic water floods. Additionally, features formed by a variety of eolian, glacial, tectonic, and mass-wasting processes can also be seen in the CRB. These terrains provide exceptional terrestrial analogs for the study of similar processes on Mars. This field guide describes four one-day trips out of Moses Lake, Washington, to observe a wide variety of Mars analogs.

Oregon, Washington↗

USGS2004

Icelandic analogs to Martian flood lavas

We report on new field observations from Icelandic lava flows that have the same surface morphology as many Martian flood lava flows. The Martian flood lavas are characterized by a platy‐ridged surface morphology whose formation is not well understood. The examples on Mars include some of the most pristine lava on the planet and flows >1500 km long. The surfaces of the flows are characterized by (1) ridges tens of meters tall and wide and hundreds of meters long, (2) plates hundreds of meters to kilometers across that are bounded by ridges, (3) smooth surfaces broken into polygons several meters across and bowed up slightly in the center, (4) parallel grooves 1–10 km long cut into the flow surface by flow past obstacles, and (5) inflated pahoehoe margins. The Icelandic examples we examined (the 1783–1784 Laki Flow Field, the Búrfells Lava Flow Field by Lake Myvatn, and a lava flow from Krafla Volcano) have all these surface characteristics. When examined in detail, we find that the surfaces of the Icelandic examples are composed primarily of disrupted pahoehoe. In some cases the breccia consists of simple slabs of pahoehoe lava; in other cases it is a thick layer dominated by contorted fragments of pahoehoe lobes. Our field observations lead us to conclude that these breccias are formed by the disruption of an initial pahoehoe surface by a large flux of liquid lava within the flow. In the case of Laki, the lava flux was provided by surges in the erupted effusion rate. At Búrfells it appears that the rapid flow came from the sudden breaching of the margins of a large ponded lava flow. Using the observations from Iceland, we have improved our earlier thermal modeling of the Martian flood lavas. We now conclude that these platy‐ridged lava flows may have been quite thermally efficient, allowing the flow to extend for >100 km under a disrupted crust that was carried on top of the flow.

Geochemistry, Geophysics, Geosystems↗