Geology ReportsSearch

Geology topics

Thomas E. Reilly

Publications and source records attributed to Thomas E. Reilly.

At least 19 recordsLinked to original sources

Groundwater availability in the United States: the value of quantitative regional assessments

The sustainability of water resources is under continued threat from the challenges associated with a growing population, competing demands, and a changing climate. Freshwater scarcity has become a fact in many areas. Much of the United States surface-water supplies are fully apportioned for use; thus, in some areas the only potential alternative freshwater source that can provide needed quantities is groundwater. Although frequently overlooked, groundwater serves as the principal reserve of freshwater in the US and represents much of the potential supply during periods of drought. Some nations have requirements to monitor and characterize the availability of groundwater such as the European Union’s Water Framework Directive (EPCEU 2000). In the US there is no such national requirement. Quantitative regional groundwater availability assessments, however, are essential to document the status and trends of groundwater availability for the US and make informed water-resource decisions possible now and in the future. Barthel (2014) highlighted that the value of regional groundwater assessments goes well beyond just quantifying the resource so that it can be better managed. The tools and techniques required to evaluate these unique regional systems advance the science of hydrogeology and provide enhanced methods that can benefit local-scale groundwater investigations. In addition, a significant, yet under-utilized benefit is the digital spatial and temporal data sets routinely generated as part of these studies. Even though there is no legal or regulatory requirement for regional groundwater assessments in the US, there is a logical basis for their implementation. The purpose of this essay is to articulate the rationale for and reaffirm the value of regional groundwater assessments primarily in the US; however, the arguments hold for all nations. The importance of the data sets and the methods and model development that occur as part of these assessments is stressed. These high-value data sets and models should be available in readily accessible formats for use today and in the future. Examples of advances in and accomplishments of two regional groundwater assessments are presented to demonstrate their function, relevance, and value for determining the sustainability of the groundwater resources of the US.

Hydrogeology Journal

The use of simulation and multiple environmental tracers to quantify groundwater flow in a shallow aquifer

Measurements of the concentrations of chlorofluorocarbons (CFCs), tritium, and other environmental tracers can be used to calculate recharge ages of shallow groundwater and estimate rates of groundwater movement. Numerical simulation also provides quantitative estimates of flow rates, flow paths, and mixing properties of the groundwater system. The environmental tracer techniques and the hydraulic analyses each contribute to the understanding and quantification of the flow of shallow groundwater. However, when combined, the two methods provide feedback that improves the quantification of the flow system and provides insight into the processes that are the most uncertain. A case study near Locust Grove, Maryland, is used to investigate the utility of combining groundwater age dating, based on CFCs and tritium, and hydraulic analyses using numerical simulation techniques. The results of the feedback between an advective transport model and the estimates of groundwater ages determined by the CFCs improve a quantitative description of the system by refining the system conceptualization and estimating system parameters. The plausible system developed with this feedback between the advective flow model and the CFC ages is further tested using a solute transport simulation to reproduce the observed tritium distribution in the groundwater. The solute transport simulation corroborates the plausible system developed and also indicates that, for the system under investigation with the data obtained from 0.9-m-long (3-foot-long) well screens, the hydrodynamic dispersion is negligible. Together the two methods enable a coherent explanation of the flow paths and rates of movement while indicating weaknesses in the understanding of the system that will require future data collection and conceptual refinement of the groundwater system.

Water Resources Research

U.S. Geological Survey Groundwater Modeling Software: Making Sense of a Complex Natural Resource

Computer models of groundwater systems simulate the flow of groundwater, including water levels, and the transport of chemical constituents and thermal energy. Groundwater models afford hydrologists a framework on which to organize their knowledge and understanding of groundwater systems, and they provide insights water-resources managers need to plan effectively for future water demands. Building on decades of experience, the U.S. Geological Survey (USGS) continues to lead in the development and application of computer software that allows groundwater models to address scientific and management questions of increasing complexity.

Fact Sheet

Ground-water availability in the United States

Ground water is among the Nation's most important natural resources. It provides half our drinking water and is essential to the vitality of agriculture and industry, as well as to the health of rivers, wetlands, and estuaries throughout the country. Large-scale development of ground-water resources with accompanying declines in ground-water levels and other effects of pumping has led to concerns about the future availability of ground water to meet domestic, agricultural, industrial, and environmental needs. The challenges in determining ground-water availability are many. This report examines what is known about the Nation's ground-water availability and outlines a program of study by the U.S. Geological Survey Ground-Water Resources Program to improve our understanding of ground-water availability in major aquifers across the Nation. The approach is designed to provide useful regional information for State and local agencies who manage ground-water resources, while providing the building blocks for a national assessment. The report is written for a wide audience interested or involved in the management, protection, and sustainable use of the Nation's water resources.

Circular

Effects of physical and chemical heterogeneity on water-quality samples obtained from wells

Factors that affect the mass of chemical constituents entering a well include the distributions of flow rate and chemical concentrations along and near the screened or open section of the well. Assuming a layered porous medium (with each layer being characterized by a uniform hydraulic conductivity and chemical concentration), a knowledge of the flow from each layer along the screened zone and of the chemical concentrations in each layer enables the total mass entering the well to be determined. Analyses of hypothetical systems and a site at Galloway, NJ, provide insight into the temporal variation of water-quality data observed when withdrawing water from screened wells in heterogeneous ground-water systems. The analyses of hypothetical systems quantitatively indicate the cause-and-effect relations that cause temporal variability in water samples obtained from wells. Chemical constituents that have relatively uniform concentrations with depth may not show variations in concentrations in the water discharged from a well after the well is purged (evacuation of standing water in the well casing). However, chemical constituents that do not have uniform concentrations near the screened interval of the well may show variations in concentrations in the well discharge water after purging because of the physics of ground-water flow in the vicinity of the screen. Water-quality samples were obtained through time over a 30 minute period from a site at Galloway, NJ. The water samples were analyzed for aromatic hydrocarbons, and the data for benzene, toluene, and meta+para xylene were evaluated for temporal variations. Samples were taken from seven discrete zones, and the flow-weighted concentrations of benzene, toluene, and meta+para xylene all indicate an increase in concentration over time during pumping. These observed trends in time were reproduced numerically based on the estimated concentration distribution in the aquifer and the flow rates from each zone. The results of the hypothetical numerical experiments and the analysis of the field data both corroborate the impact of physical and chemical heterogeneity in the aquifer on water-quality samples obtained from wells. If temporal variations in concentrations of chemical constituents are observed, they may indicate variability in the ground-water system being sampled, which may give insight into the chemical distributions within the aquifer and provide guidance in the positioning of new sampling devices or wells.

Groundwater

Guidelines for Evaluating Ground-Water Flow Models

Ground-water flow modeling is an important tool frequently used in studies of ground-water systems. Reviewers and users of these studies have a need to evaluate the accuracy or reasonableness of the ground-water flow model. This report provides some guidelines and discussion on how to evaluate complex ground-water flow models used in the investigation of ground-water systems. A consistent thread throughout these guidelines is that the objectives of the study must be specified to allow the adequacy of the model to be evaluated.

Scientific Investigations Report

Evolving issues and practices in managing ground-water resources: Case studies on the role of science

Hydrologic stresses throughout the 20th century and presently (2003) have caused the depletion and degradation of our Nation’s vital ground-water resources in many areas. Management strategies have been and are being implemented to optimize use of our ground-water resources with respect to achieving sustainability while mitigating the consequences of future withdrawals. The seven case studies presented herein show how the U.S. Geological Survey (USGS) in cooperation with local, State and other Federal agencies, as well as the private sector, have addressed some of the complexities of ground-water management using scientifically-based hydrologic studies and hydrologic monitoring. It is clear that the managed conjunctive use of our combined ground-water and surface-water supplies, and the artificial recharge of our ground-water systems present both challenges and opportunities. How well we manage these options depends upon best science practices, improved understanding of the resources, and the informed consensus of all stakeholders.

Circular

Flow and storage in groundwater systems

The dynamic nature of groundwater is not readily apparent, except where discharge is focused at springs or where recharge enters sinkholes. Yet groundwater flow and storage are continually changing in response to human and climatic stresses. Wise development of groundwater resources requires a more complete understanding of these changes in flow and storage and of their effects on the terrestrial environment and on numerous surface-water features and their biota.

Science

Assessing ground-water vulnerability to contamination: Providing scientifically defensible information for decision makers

Throughout the United States increasing demands for safe drinking water and requirements to maintain healthy ecosystems are leading policy makers to ask complex social and scientific questions about how to assess and manage our water resources. This challenge becomes particularly difficult as policy and management objectives require scientific assessments of the potential for ground-water resources to become contaminated from anthropogenic, as well as natural sources of contamination. Assessments of the vulnerability of ground water to contamination range in scope and complexity from simple, qualitative, and relatively inexpensive approaches to rigorous, quantitative, and costly assessments. Tradeoffs must be carefully considered among the competing influences of the cost of an assessment, the scientific defensibility, and the amount of acceptable uncertainty in meeting the objectives of the water-resource decision maker.

Circular

Yucca Mountain as a Radioactive-Waste Repository

Yucca Mountain straddles the west boundary of the Nevada Test Site in an arid, remote, and thinly populated region of southwestern Nevada. It is the potential site of a monitored geologic repository for the Nation’s commercial and military spent nuclear fuel, high-level radioactive waste derived from reprocessing of uranium and plutonium, surplus plutonium, and other nuclear-weapons materials. (Collectively, these radioactive materials are known as high-level waste [HLW] and are to be distinguished from the low-level radioactive waste to be stored at the recently opened Waste Isolation Pilot Plant in southeastern New Mexico.) Tens of thousands of metric tons of HLW is presently stored at more than a hundred sites in 40 States (fig. 1). The fundamental rationale for a geologic repository for radioactive materials is to securely isolate them from the environment and its occupants to the greatest extent possible.

Nevada

Sustainability of ground-water resources

The pumpage of fresh ground water in the United States in 1995 was estimated to be approximately 77 billion gallons per day (Solley and others, 1998), which is about 8 percent of the estimated 1 trillion gallons per day of natural recharge to the Nation's ground-water systems (Nace, 1960). From an overall national perspective, the ground-water resource appears ample. Locally, however, the availability of ground water varies widely. Moreover, only a part of the ground water stored in the subsurface can be recovered by wells in an economic manner and without adverse consequences.

Circular

Effect of seasonal and long-term changes in stress on sources of water to wells

The source of water to wells is ultimately the location where the water flowing to a well enters the boundary surface of the ground-water system . In ground-water systems that receive most of their water from areal recharge, the location of the water entering the system is at the water table . The area contributing recharge to a discharging well is the surface area that defines the location of the water entering the groundwater system. Water entering the system at the water table flows to the well and is eventually discharged from the well. Many State agencies are currently (1994) developing wellhead-protection programs. The thrust of some of these programs is to protect water supplies by determining the areas contributing recharge to water-supply wells and by specifying regulations to minimize the opportunity for contamination of the recharge water by activities at the land surface. In the analyses of ground-water flow systems, steady-state average conditions are frequently used to simplify the problem and make a solution tractable. Recharge is usually cyclic in nature, however, having seasonal cycles and longer term climatic cycles. A hypothetical system is quantitatively analyzed to show that, in many cases, these cyclic changes in the recharge rates apparently do not significantly affect the location and size of the areas contributing recharge to wells. The ratio of the mean travel time to the length of the cyclic stress period appears to indicate whether the transient effects of the cyclic stress must be explicitly represented in the analysis of contributing areas to wells. For the cases examined, if the ratio of the mean travel time to the period of the cyclic stress was much greater than one, then the transient area contributing recharge to wells was similar to the area calculated using an average steady-state condition. Noncyclic long-term transient changes in water use, however, and cyclic stresses on systems with ratios less than 1 can and do affect the location and size of the areas contributing recharge to wells.

Water Supply Paper

Summary of selected computer programs produced by the U.S. Geological Survey for simulation of ground-water flow and quality, 1994

A summary list of reports that document numerical methods that simulate ground-water flow and quality is presented. The list documents the reference by giving a description of each model program, its numerical features, an expression of the number of past applications and where to obtain a copy. All reports included in the list have been published or developed by the U.S. Geological Survey and most contain listings of the computer programs.

Circular

Hydrologic and chemical data from an experiment to examine temporal variability in water samples from screened wells on Cape Cod, Massachusetts

An experiment was designed to evaluate the changing chemical composition of the water pumped from a well screened in a physically and chemically heterogenous aquifer. Well F453-63, at the U.S. Geological Survey Toxic-Substances Hydrology research site located on Cape Cod, Massachusetts, was selected because it was known that the screen penetrated both the oxic and anoxic zones of the sewage plume from the Otis Air Base sewage-disposal sand beds. The experiment was conducted on August 12, 1992. Well F453-63 was sampled over time as it was pumped continuously, and three multilevel samplers were used to document the vertical distribution of selected chemicals in the ground water in the immediate vicinity of the well. All water samples obtained during the experiment were analyzed in the field for specific conductance and pH. The samples were subsequently analyzed for concentrations of ferrous iron (Fe+2), boron, calcium, chloride, iron (Fe total), phosphorus, potassium, magnesium, manganese, sodium, zinc, and nitrogen species, including nitrous oxide, ammonium, nitrite and nitrate. The results of these chemical analyses along with appropriate physical measurements of the site and aquifer material are documented in this data report.

Massachusetts

Factors affecting areas contributing recharge to wells in shallow aquifers

The source of water to wells is ultimately the location where the water flowing to a well enters the boundary surface of the ground-water system. In ground-water systems that receive most of their water from areal recharge, the location of the water entering the ground-water system is at the water table. The area contributing recharge to a discharging well is the surface area that defines the location of the water entering the ground-water system at the water table that flows to the well and is eventually discharged from the well. The calculation of areas contributing recharge to wells is complex because flow paths in ground-water systems change in response to development, and the aquifer material in ground-water systems is heterogeneous and is hidden from direct observation . Hypothetical experiments were undertaken to show the complexities in the delineation of areas contributing recharge to wells. Four different 'cases' are examined to demonstrate the effect of different conceptualized aquifer frameworks on deterministically calculated areas contributing recharge. The main conclusion drawn from the experiments is that, in order to understand the cause and effect relations that affect the quality of water derived from wells, the importance and nature of the variability in the ground-waterflow system must be considered and accounted for in any efforts to 'protect' the water supply.

Water Supply Paper

Bias in groundwater samples caused by wellbore flow

Design of physical installations and sampling procedures for ground-water monitoring networks, particularly for detection and analysis of possible contaminants, is a topic of great scientific and practical interest at the present time. Recent practice in the design of monitoring networks associated with known contaminant sources sometimes includes an array of monitoring wells with long well screens (up to 50 feet or more). Numerical experiments with a detailed three-dimensional ground-water flow model indicate that significant wellbore flow can occur in contaminant monitoring wells with long well screens that are embedded in homogeneous aquifers with very small vertical head differences in the aquifer. This ``short circuiting'' of flow through boreholes should exist at some level on all scales. Consideration of the general flow pattern within the borehole, the flow pattern in the aquifer adjacent to the borehole, and the process of obtaining water samples from the borehole suggests that in many situations the practice of installing long well screens in contaminant monitoring wells should be abandoned.

Journal of Hydraulic Engineering