Geology topics

Teng Wang

Publications and source records attributed to Teng Wang.

4 recordsLinked to original sources

USGS2018

The 2015 Gorkha (Nepal) Earthquake sequence: I. Source modeling and deterministic 3D ground shaking

To better quantify the relatively long period (< 0.3 Hz) shaking experienced during the 2015 Gorkha (Nepal) earthquake sequence, we study the finite rupture processes and the associated 3D ground motion of the Mw7.8 mainshock and the Mw7.2 aftershock . The 3D synthetics are then used in the broadband ground shaking in Kathmandu with a hybrid approach, summarized in a companion paper (Chen and Wei, 2017, submitted together). We determined the coseismic rupture process of the mainshock by joint inversion of InSAR/SAR, GPS (static and high-rate), strong motion and teleseismic waveforms. Our inversion for the mainshock indicates unilateral rupture towards the ESE, with an average rupture speed of 3.0 km/s and a total duration of ~ 60 s. Additionally, we find that the beginning part of the rupture (5–18 s) has about 40% longer rise time than the rest of the rupture, as well as slower rupture velocity. Our model shows two strong asperities occurring ~ 24 s and ~ 36 s after the origin and located ~ 30 km to the northwest and northeast of the Kathmandu valley, respectively. In contrast, the Mw7.2 aftershock is more compact both in time and space, as revealed by joint inversion of teleseismic body waves and InSAR data. The different rupture features between the mainshock and the aftershock could be related to difference in fault zone structure. The mainshock and aftershock ground motions in the Kathmandu valley, recorded by both strong motion and high-rate GPS stations, exhibited strong amplification around 0.2 Hz. A simplified 3D basin model, calibrated by an Mw5.2 aftershock, can match the observed waveforms reasonably well at 0.3 Hz and lower frequency. The 3D simulations indicate that the basin structure trapped the wavefield and produced an extensive ground vibration. Our study suggests that the combination of rupture characteristics and propagational complexity are required to understand the ground shaking produced by hazardous earthquakes such as the Gorkha event.

Tectonophysics↗

USGS2016

Detecting seasonal landslide movement within the Cascade landslide complex (Washington) using time-series SAR imagery

Detection of slow or limited landslide movement within broad areas of forested terrain has long been problematic, particularly for the Cascade landslide complex (Washington) located along the Columbia River Gorge. Although parts of the landslide complex have been found reactivated in recent years, the timing and magnitude of motion have not been systematically monitored or interpreted. Here we apply novel time-series strategies to study the spatial distribution and temporal behavior of the landslide movement between 2007 and 2011 using InSAR images from two overlapping L-band ALOS PALSAR-1 satellite tracks. Our results show that the reactivated part has moved approximately 700 mm downslope during the 4-year observation period, while other parts of the landslide complex have generally remained stable. However, we also detect about 300 mm of seasonal downslope creep in a terrain block upslope of the Cascade landslide complex—terrain previously thought to be stable. The temporal oscillation of the seasonal movement can be correlated with precipitation, implying that seasonal movement here is hydrology-driven. The seasonal movement also has a frequency similar to GPS-derived regional ground oscillations due to mass loading by stored rainfall and subsequent rebound but with much smaller magnitude, suggesting different hydrological loading effects. From the time-series amplitude information on terrain upslope of the headscarp, we also re-evaluate the incipient motion related to the 2008 Greenleaf Basin rock avalanche, not previously recognized by traditional SAR/InSAR methods. The approach used in this study can be used to identify active landslides in forested terrain, to track the seasonal movement of landslides, and to identify previously unknown landslide hazards.

Washington↗

USGS2015

Dome growth at Mount Cleveland, Aleutian Arc, quantified by time-series TerraSAR-X imagery

Synthetic aperture radar imagery is widely used to study surface deformation induced by volcanic activity; however, it is rarely applied to quantify the evolution of lava domes, which is important for understanding hazards and magmatic system characteristics. We studied dome formation associated with eruptive activity at Mount Cleveland, Aleutian Volcanic Arc, in 2011–2012 using TerraSAR-X imagery. Interferometry and offset tracking show no consistent deformation and only motion of the crater rim, suggesting that ascending magma may pass through a preexisting conduit system without causing appreciable surface deformation. Amplitude imagery has proven useful for quantifying rates of vertical and areal growth of the lava dome within the crater from formation to removal by explosive activity to rebirth. We expect that this approach can be applied at other volcanoes that host growing lava domes and where hazards are highly dependent on dome geometry and growth rates.

Alaska↗

USGS2015

The 2014 Mw6.1 South Napa Earthquake: A unilateral rupture with shallow asperity and rapid afterslip

The M w 6.1 South Napa earthquake occurred near Napa, California on August 24, 2014 (UTC), and was the largest inland earthquake in Northern California since the 1989 M w 6.9 Loma Prieta earthquake. The first report of the earthquake from the Northern California Earthquake Data Center (NCEDC) indicates a hypocentral depth of 11.0km with longitude and latitude of (122.3105°W, 38.217°N). Surface rupture was documented by field observations and Lidar imaging (Brooks et al. 2014; Hudnut et al. 2014; Brocher et al., 2015), with about 12 km of continuous rupture starting near the epicenter and extending to the northwest. The southern part of the rupture is relatively straight, but the strike changes by about 15° at the northern end over a 6-km segment. The peak dextral offset was observed near the Buhman residence with right-.‐lateral motion of 46 cm, near the location where the strike of fault begins to rotate clock-.‐wise (Hudnut et al., 2014). The earthquake was well recorded by the strong motion network operated by the NCEDC, the California Geological Survey and the U.S. Geological Survey (USGS). There are about 12 sites within an epicentral distance of 15km, with relatively good azimuthal coverage (Fig.1). The largest peak-ground-velocity (PGV) of nearly 100 cm/s was observed on station 1765, which is the closest station to the rupture and lies about 3 km east of the northern segment (Fig. 1). The ground deformation associated with the earthquake was also well recorded by the high-resolution COSMO-SkyMed satellite and Sentinel-1A satellite, providing independent static observations.

California↗