Geology topics

Steve G. Banham

Publications and source records attributed to Steve G. Banham.

6 recordsLinked to original sources

USGS2024

Evolution of a lake margin recorded in the Sutton Island member of the Murray formation, Gale crater, Mars

This study uses data from the Mars Science Laboratory Curiosity rover to document the facies of the Sutton Island member of the Murray formation, interpret paleoenvironments, and establish key stratigraphic transitions at Gale crater. Two facies associations were identified: Facies Association 1 (FA1) and Facies Association 2 (FA2). Individual facies in FA1 include planar-laminated mudstone with minor intervals of planar sandstone, ripple cross-laminated sandstone, cross-stratified sandstone, and alternating laminated sandstone and mudstone. Meter-thick packages of planar-laminated mudstone in FA1 are interpreted to represent deposition in low-energy ponded environments along the lake margin. Straight- and curve-crested ripple cross-laminated facies are interpreted to represent current-influenced deposition. Cross-stratified sandstone facies consist of dm-thick sets that represent deposition in distal channels. Intercalated mm-scale mudstone and sandstone laminae represent waning flow conditions and possible channel abandonment. Facies in FA1 collectively represent deposition in a distal delta plain. FA2 is comprised of planar-laminated mudstone with minor sandstone and is interpreted to represent deposition in a lacustrine-basin setting by suspension settling linked to density flows. FA1 transitions upward into FA2, defining a rapid transgression substantial enough to facilitate the deposition of distal lake facies above delta plain facies. The abrupt transition from FA2 back to FA1 deltaic deposits is suggestive of forced regression. Facies in FA1 and FA2 are consistent with the prevalence of aqueous environments recorded in other Murray formation members and extend our understanding of the dynamic sedimentary processes that characterized ancient lacustrine systems at Gale crater.

Journal of Geophysical Research - Planets↗

USGS2022

Geology and stratigraphic correlation of the Murray and Carolyn Shoemaker formations across the Glen Torridon region, Gale crater, Mars

The Glen Torridon (GT) region within Gale crater, Mars, occurs in contact with the southern side of Vera Rubin ridge (VRR), a well-defined geomorphic feature that is comparatively resistant to erosion. Prior to detailed ground-based investigation of GT, its geologic relationship with VRR was unknown. Distinct lithologic subunits within the Jura member (Murray formation), which forms the upper part of VRR, made it possible to be also identified within GT. This indicates that the strata pass across the geomorphic divide between regions. Furthermore, the cross-bedded lower part of the overlying Knockfarril Hill member (Carolyn Shoemaker formation) also occurs within both VRR and GT. Correlation of both units demonstrates that the strata form a continuous stratigraphic succession regardless of large-scale geomorphic expression. The lithologic change from mudstone (Jura member) to cross-bedded sandstone (Knockfarril Hill member) heralds a significant shift in paleoenvironment from lacustrine to fluvial. The upper part of the Knockfarril Hill member consists of interbedded mudstone and sandstone that transitions to the overlying finely laminated mudstone of the Glasgow member, and a return to lacustrine deposition. In GT, the Stimson formation unconformably overlies the Glasgow member, where it demarks the southern boundary of GT. Contacts for each stratigraphic unit were defined and transferred to a high-resolution image base to make a geologic map and cross sections perpendicular to the NE strike. Stratal dips cannot exceed 2° NW to retain the positions of stratigraphic units in the locations they are exposed throughout GT.

Journal of Geophysical Research: Planets↗

USGS2021

A rock record of complex aeolian bedforms in a Hesperian desert landscape: The Stimson formation as exposed in the Murray Buttes, Gale Crater, Mars

Lithified aeolian strata encode information about ancient planetary surface processes and the climate during deposition. Decoding these strata provides insight regarding past sediment transport processes, bedform kinematics, depositional landscape, and the prevailing climate. Deciphering these signatures requires a detailed analysis of sedimentary architecture to reconstruct dune morphology, motion, and the conditions that enabled their formation. Here, we show that a distinct sandstone unit exposed in the foothills of Mount Sharp, Gale crater, Mars, records the preserved expression of compound aeolian bedforms that accumulated in a large dune field. Analysis of Mastcam images of the Stimson formation shows that it consists of cross‐stratified sandstone beds separated by a hierarchy of erosive bounding surfaces formed during dune migration. The presence of two orders of surfaces with distinct geometrical relations reveals that the Stimson‐era landscape consisted of large dunes (draas) with smaller, superimposed dunes migrating across their lee slopes. Analysis of cross‐lamination and subset bounding surface geometries indicate a complex wind regime that transported sediment toward the north, constructing oblique dunes. This dune field was a direct product of the regional climate and the surface processes active in Gale crater during the fraction of the Hesperian Period recorded by the Stimson formation. The environment was arid, supporting a large aeolian dune field; this setting contrasts with earlier humid depositional episodes, recorded by the lacustrine sediments of the Murray formation (also Hesperian). Such fine‐scale reconstruction of landscapes on the ancient surface of Mars is important to understanding the planet’s past climate and habitability.

Journal of Geophysical Research - Planets↗

USGS2020

Evidence for a diagenetic origin of Vera Rubin Ridge, Gale Crater, Mars: Summary and synthesis of Curiosity's exploration campaign

This paper provides an overview of the Curiosity rover's exploration at Vera Rubin ridge (VRR) and summarizes the science results. VRR is a distinct geomorphic feature on lower Aeolis Mons (informally known as Mount Sharp) that was identified in orbital data based on its distinct texture, topographic expression, and association with a hematite spectral signature. Curiosity conducted extensive remote sensing observations, acquired data on dozens of contact science targets, and drilled three outcrop samples from the ridge, as well as one outcrop sample immediately below the ridge. Our observations indicate that strata composing VRR were deposited in a predominantly lacustrine setting and are part of the Murray formation. The rocks within the ridge are chemically in family with underlying Murray formation strata. Red hematite is dispersed throughout much of the VRR bedrock, and this is the source of the orbital spectral detection. Gray hematite is also present in isolated, gray‐colored patches concentrated toward the upper elevations of VRR, and these gray patches also contain small, dark Fe‐rich nodules. We propose that VRR formed when diagenetic event(s) preferentially hardened rocks, which were subsequently eroded into a ridge by wind. Diagenesis also led to enhanced crystallization and/or cementation that deepened the ferric‐related spectral absorptions on the ridge, which helped make them readily distinguishable from orbit. Results add to existing evidence of protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record.

Journal of Geophysical Research: Planets↗

USGS2020

A lacustrine paleoenvironment recorded at Vera Rubin ridge, Gale crater: Overview of the sedimentology and stratigraphy observed by the Mars Science Laboratory Curiosity rover

For ~500 Martian solar days (sols), the Mars Science Laboratory team explored Vera Rubin ridge (VRR), a topographic feature on the northwest slope of Aeolis Mons. Here we review the sedimentary facies and stratigraphy observed during sols 1,800–2,300, covering more than 100 m of stratigraphic thickness. Curiosity's traverse includes two transects across the ridge, which enables investigation of lateral variability over a distance of ~300 m. Three informally named stratigraphic members of the Murray formation are described: Blunts Point, Pettegrove Point, and Jura, with the latter two exposed on VRR. The Blunts Point member, exposed just below the ridge, is characterized by a recessive, fine-grained facies that exhibits extensive planar lamination and is crosscut by abundant curvi-planar veins. The Pettegrove Point member is more resistant, fine-grained, thinly planar laminated, and contains a higher abundance of diagenetic concretions. Conformable above the Pettegrove Point member is the Jura member, which is also fine-grained and parallel stratified, but is marked by a distinct step in topography, which coincides with localized meter-scale inclined strata, a thinly and thickly laminated facies, and occasional crystal molds. All members record low-energy lacustrine deposition, consistent with prior observations of the Murray formation. Uncommon outcrops of low-angle stratification suggest possible subaqueous currents, and steeply inclined beds may be the result of slumping. Collectively, the rocks exposed at VRR provide additional evidence for a long-lived lacustrine environment (in excess of 10 6 years via comparison to terrestrial records of sedimentation), which extends our understanding of the duration of habitable conditions in Gale crater.

Journal of Geophysical Research: Planets↗

USGS2018

Ancient Martian aeolian processes and palaeomorphology reconstructed from the Stimson formation on the lower slope of Aeolis Mons, Gale crater, Mars

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca 10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip‐azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.

Sedimentology↗