Geology Reports⌕ Search

Geology topics

Stephanie G. Prejean

Publications and source records attributed to Stephanie G. Prejean.

30 records · Page 2Linked to original sources
USGS2013

Strongly gliding harmonic tremor during the 2009 eruption of Redoubt Volcano

During the 2009 eruption of Redoubt Volcano, Alaska, gliding harmonic tremor occurred prominently before six nearly consecutive explosions during the second half of the eruptive sequence. The fundamental frequency repeatedly glided upward from < 1 Hz to as high as 30 Hz in less than 10 min, followed by a relative seismic quiescence of 10 to 60 s immediately prior to explosion. High frequency (5 to 20 Hz) gliding returned during the extrusive phase, and lasted for 20 min to 3 h at a time. Although harmonic tremor is not uncommon at volcanoes, tremor at such high frequencies is a rare observation. These frequencies approach or exceed the plausible upper limits of many models that have been suggested for volcanic tremor. We also analyzed the behavior of a swarm of repeating earthquakes that immediately preceded the first instance of pre-explosion gliding harmonic tremor. We find that these earthquakes share several traits with upward gliding harmonic tremor, and favor the explanation that the gliding harmonic tremor at Redoubt Volcano is created by the superposition of increasingly frequent and regular, repeating stick–slip earthquakes through the Dirac comb effect.

Alaska↗
USGS2013

Volcanic earthquakes in Alaska's national parks

Alaska’s national parks contain 11 historically active volcanoes (Figure 2), which produce thousands of small earthquakes every year. These earthquakes are voices of the magmatic and geothermal systems within the volcanoes. The Alaska Volcano Observatory (AVO), a joint program of the U.S. Geological Survey, the Geophysical Institute at the University of Alaska Fairbanks, and the Alaska Division of Geological and Geophysical Surveys, monitors volcanic earthquakes year round with networks of seismometers (Figure 4). Data from these networks allow AVO to evaluate the state of magmatic systems and provide warning of volcanic unrest, potential eruptions, and hazards. The key to correctly interpreting earthquakes lies in understanding the physical processes that trigger earthquakes at volcanoes.

Alaska↗
USGS2012

Volcanoes: observations and impact

Volcanoes are critical geologic hazards that challenge our ability to make long-term forecasts of their eruptive behaviors. They also have direct and indirect impacts on human lives and society. As is the case with many geologic phenomena, the time scales over which volcanoes evolve greatly exceed that of a human lifetime. On the other hand, the time scale over which a volcano can move from inactivity to eruption can be rather short: months, weeks, days, and even hours. Thus, scientific study and monitoring of volcanoes is essential to mitigate risk. There are thousands of volcanoes on Earth, and it is impractical to study and implement ground-based monitoring at them all. Fortunately, there are other effective means for volcano monitoring , including increasing capabilities for satellite-based technologies.

Book chapter↗
USGS2012

Earthquake studies reveal the magmatic plumbing system of the Katmai volcanoes

The 1912 eruption of Novarupta was the largest of the 1900s (Fierstein and Hildreth 2001, Hildreth et al. 2003). A century later, fundamental questions remain regarding the source of the magma for that eruption. A previous seismic study of the Katmai area (Jolly et al. 2007) identified a single large area of anomalous structure in the subsurface centered beneath Katmai Pass (Figure 2), but the magma source for the 1912 eruption is thought to have been beneath Mt. Katmai (Hildreth et al. 2003). This mystery was a prime motivation for the research project described here. In summer 2008, scientists and staff from the Alaska Volcano Observatory (AVO) and the University of Wisconsin- Madison installed 11 temporary seismic recording instruments around the Katmai Pass area, complementing the existing AVO seismic network stations (Figure 3). The primary goal of the deployment was to record data from local earthquakes in order to yield an improved model of the three-dimensional structure of the upper crust beneath and surrounding Katmai Pass, using an analysis method known as double-difference seismic tomography (Zhang and Thurber 2003). The method yields a threedimensional image of the velocity of seismic waves in the subsurface, and also produces improved estimates of the locations of the earthquakes beneath the seismic stations. Our main finding is that there is not a single large anomalous zone centered beneath Katmai Pass; rather there are several separate anomalous zones, one each beneath Katmai, Trident-Novarupta, and Martin-Mageik. Furthermore, the earthquakes are tightly clustered beneath the various volcanic centers, and are found to be systematically deeper than previously thought. Linear trends of earthquakes are also revealed, similar to features observed at other volcanoes, possibly outlining previously unidentified fault structures or indicating the path of migrating magma or magmatic fluids and gases.

Alaska↗
USGS2011

Alaska's Pavlof volcano ends 11-year repose

After an 11‐year period of repose, Pavlof volcano on the Alaska Peninsula (Figure 1) began an episode of Strombolian eruption lasting 31 days, from 14 August to 13 September 2007. The eruption began abruptly on 14 August after a minor increase in seismicity the previous day. Nearly continuous lava fountaining, explosions, and lahars caused by minor disruption of the ice and snow cover on the volcano characterized the eruption. The eruption also produced diffuse ash plumes that reached 5–6 kilometers above sea level, but the plumes were too small and did not extend high enough to affect local or regional air travel. Melting of snow and ice on the upper part of the edifice by hot debris avalanches and lava resulted in numerous lahars that entered the sea and inundated a 2×10 6 square meter area on the volcanos southern slope.

Eos, Transactions, American Geophysical Union↗
USGS2011

Seismic swarm associated with the 2008 eruption of Kasatochi Volcano, Alaska: earthquake locations and source parameters

An energetic seismic swarm accompanied an eruption of Kasatochi Volcano in the central Aleutian volcanic arc in August of 2008. In retrospect, the first earthquakes in the swarm were detected about 1 month prior to the eruption onset. Activity in the swarm quickly intensified less than 48 h prior to the first large explosion and subsequently subsided with decline of eruptive activity. The largest earthquake measured as moment magnitude 5.8, and a dozen additional earthquakes were larger than magnitude 4. The swarm exhibited both tectonic and volcanic characteristics. Its shear failure earthquake features were b value = 0.9, most earthquakes with impulsive P and S arrivals and higher-frequency content, and earthquake faulting parameters consistent with regional tectonic stresses. Its volcanic or fluid-influenced seismicity features were volcanic tremor, large CLVD components in moment tensor solutions, and increasing magnitudes with time. Earthquake location tests suggest that the earthquakes occurred in a distributed volume elongated in the NS direction either directly under the volcano or within 5-10 km south of it. Following the M W 5.8 event, earthquakes occurred in a new crustal volume slightly east and north of the previous earthquakes. The central Aleutian Arc is a tectonically active region with seismicity occurring in the crusts of the Pacific and North American plates in addition to interplate events. We postulate that the Kasatochi seismic swarm was a manifestation of the complex interaction of tectonic and magmatic processes in the Earth's crust. Although magmatic intrusion triggered the earthquakes in the swarm, the earthquakes failed in context of the regional stress field.

Alaska↗
USGS2011

Volcanic plume height measured by seismic waves based on a mechanical model

In August 2008 an unmonitored, largely unstudied Aleutian volcano, Kasatochi, erupted catastrophically. Here we use seismic data to infer the height of large eruptive columns such as those of Kasatochi based on a combination of existing fluid and solid mechanical models. In so doing, we propose a connection between a common, observable, short-period seismic wave amplitude to the physics of an eruptive column. To construct a combined model, we estimate the mass ejection rate of material from the vent on the basis of the plume height, assuming that the height is controlled by thermal buoyancy for a continuous plume. Using the estimated mass ejection rate, we then derive the equivalent vertical force on the Earth through a momentum balance. Finally, we calculate the far-field surface waves resulting from the vertical force. The model performs well for recent eruptions of Kasatochi and Augustine volcanoes if v , the velocity of material exiting the vent, is 120-230 m s -1 . The consistency between the seismically inferred and measured plume heights indicates that in these cases the far-field ~1 s seismic energy radiated by fluctuating flow in the volcanic jet during the eruption is a useful indicator of overall mass ejection rates. Thus, use of the model holds promise for characterizing eruptions and evaluating ash hazards to aircraft in real time on the basis of far-field short-period seismic data. This study emphasizes the need for better measurements of eruptive plume heights and a more detailed understanding of the full spectrum of seismic energy radiated coeruptively.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Three-dimensional P-wave velocity structure and precise earthquake relocation at Great Sitkin Volcano, Alaska

Waveform cross-correlation with bispectrum verification is combined with double-difference tomography to increase the precision of earthquake locations and constrain regional 3D P -wave velocity heterogeneity at Great Sitkin volcano, Alaska. From 1999 through 2005, the Alaska Volcano Observatory (AVO) recorded &sim;1700 earthquakes in the vicinity of Great Sitkin, including two M L 4.3 earthquakes that are among the largest events in the AVO catalog. The majority of earthquakes occurred during 2002 and formed two temporally and spatially separate event sequences. The first sequence began on 17 March 2002 and was centered &sim;20 km west of the volcano. The second sequence occurred on the southeast flank of Great Sitkin and began 28 May 2002. It was preceded by two episodes of volcanic tremor. Earthquake relocations of this activity on the southeast flank define a vertical planar feature oriented radially from the summit and in the direction of the assumed regional maximum compressive stress due to convergence along the Alaska subduction zone. This swarm may have been caused or accompanied by the emplacement of a dike. Relocations of the mainshock&ndash;aftershock sequence occurring west of Great Sitkin are consistent with rupture on a strike-slip fault. Tomographic images support the presence of a vertically dipping fault striking parallel to the direction of convergence in this region. The remaining catalog hypocenters relocate along discrete features beneath the volcano summit; here, low P -wave velocities possibly indicate the presence of magma beneath the volcano.

Alaska↗
USGS2003

High precision earthquake locations reveal seismogenic structure beneath Mammoth Mountain, California

In 1989, an unusual earthquake swarm occurred beneath Mammoth Mountain that was probably associated with magmatic intrusion. To improve our understanding of this swarm, we relocated Mammoth Mountain earthquakes using a double difference algorithm. Relocated hypocenters reveal that most earthquakes occurred on two structures, a near-vertical plane at 7–9 km depth that has been interpreted as an intruding dike, and a circular ring-like structure at ∼5.5 km depth, above the northern end of the inferred dike. Earthquakes on this newly discovered ring structure form a conical section that dips outward away from the aseismic interior. Fault-plane solutions indicate that in 1989 the seismicity ring was slipping as a ring-normal fault as the center of the mountain rose with respect to the surrounding crust. Seismicity migrated around the ring, away from the underlying dike at a rate of ∼0.4 km/month, suggesting that fluid movement triggered seismicity on the ring fault.

California↗
USGS2002

Fault structure and kinematics of the Long Valley Caldera region, California, revealed by high-accuracy earthquake hypocenters and focal mechanism stress inversions

We have determined high-resolution hypocenters for 45,000+ earthquakes that occurred between 1980 and 2000 in the Long Valley caldera area using a double-difference earthquake location algorithm and routinely determined arrival times. The locations reveal numerous discrete fault planes in the southern caldera and adjacent Sierra Nevada block (SNB). Intracaldera faults include a series of east/west-striking right-lateral strike-slip faults beneath the caldera's south moat and a series of more northerly striking strike-slip/normal faults beneath the caldera's resurgent dome. Seismicity in the SNB south of the caldera is confined to a crustal block bounded on the west by an east-dipping oblique normal fault and on the east by the Hilton Creek fault. Two NE-striking left-lateral strike-slip faults are responsible for most seismicity within this block. To understand better the stresses driving seismicity, we performed stress inversions using focal mechanisms with 50 or more first motions. This analysis reveals that the least principal stress direction systematically rotates across the studied region, from NE to SW in the caldera's south moat to WNW-ESE in Round Valley, 25 km to the SE. Because WNW-ESE extension is characteristic of the western boundary of the Basin and Range province, caldera area stresses appear to be locally perturbed. This stress perturbation does not seem to result from magma chamber inflation but may be related to the significant (???20 km) left step in the locus of extension along the Sierra Nevada/Basin and Range province boundary. This implies that regional-scale tectonic processes are driving seismic deformation in the Long Valley caldera.

California↗
USGS2001

Observations of earthquake source parameters at 2 km depth in the Long Valley Caldera, eastern California

To investigate seismic source parameter scaling and seismic efficiency in the Long Valley caldera, California, we measured source parameters for 41 earthquakes (M 0.5 to M 5) recorded at 2 km depth in the Long Valley Exploratory Well. Borehole recordings provide a wide frequency bandwidth, typically 1 to 200–300 Hz, and greatly reduce seismic noise and path effects compared to surface recordings. We calculated source parameters in both the time and frequency domains for P and S waves. At frequencies above the corner frequency, spectra decay faster than ω 3 , indicating that attenuation plays an important role in shaping the spectra (path averaged Q p = 100–400, Q s = 200–800). Source parameters are corrected for attenuation and radiation pattern. Both static stress drops and apparent stresses range from approximately 0.01 to 30 MPa. Although static stress drops do not vary with seismic moment for these data, our analyses are consistent with apparent stress increasing with increasing moment. To estimate tectonic driving stress and seismic efficiencies in the region, we combined source parameter measurements with knowledge of the stress field and a Coulomb failure criterion to infer a driving stress of 40–70 MPa. Subsequent seismic efficiencies are consistent with McGarr's (1999) hypothesis of a maximum seismic efficiency of 6%.

California↗