Shlomo P. Neuman | Geology Reports

USGS2008

Field determination of the three-dimensional hydraulic conductivity tensor of anisotropic media: 1. Theory

A field method is proposed for determining the three-dimensional hydraulic conductivity tensor and specific storage of an anisotropic porous or fractured medium. The method, known as cross-hole testing (to distinguish it from conventional single-hole packer tests), consists of injecting fluid into (or withdrawing fluid from) packed-off intervals in a number of boreholes and monitoring the transient head response in similar intervals in neighboring boreholes. The directions of the principal hydraulic conductivities need not be known prior to the test, and the boreholes may have arbitrary orientations (e.g., they can all be vertical). An important aspect of the proposed method is that it provides direct field information on whether it is proper to regard the medium as being uniform and anisotropic on the scale of the test. The first paper presents theoretical expressions describing transient and steady state head response in monitoring intervals of arbitrary lengths and orientations, to constant-rate injection into (or withdrawal from) intervals having similar or different lengths and orientations. The conditions under which these intervals can be treated mathematically as points are investigated by an asymptotic analysis. The effect of planar no-flow and constant-head boundaries on the response is analyzed by the theory of images. The second paper describes the field methodology and shows how the proposed approach works in the case of fractured granitic rocks.

Water Resources Research↗

USGS2008

Field determination of the three-dimensional hydraulic conductivity tensor of anisotropic media: 2. Methodology and application to fractured rocks

The analytical solutions developed in the first paper can be used to interpret the results of cross-hole tests conducted in anisotropic porous or fractured media. In the particular case where the injection and monitoring intervals are short relative to the distance between them, the test results can be analyzed graphically. From the transient variation of hydraulic head in a given monitoring interval, one can determine the directional hydraulic diffusivity, K d ( e )/ S s , and the quantity D / S s , by curve matching. (Here K d ( e ) is directional hydraulic conductivity parallel to the unit vector, e , pointing from the injection to the monitoring interval, S s is specific storage, and D is the determinant of the hydraulic conductivity tensor, K .) The principal values and directions of K , together with S s , can then be evaluated by fitting an ellipsoid to the square roots of the directional diffusivities. Ideally, six directional measurements are required. In practice, a larger number of measurements is often necessary to enable fitting an ellipsoid to the data by least squares. If the computed [ K d ( e )/ s s ] ½ values fluctuate so severely that a meaningful least squares fit is not possible, one has a direct indication that the subsurface does not behave as a uniform anisotropic medium on the scale of the test. Test results from a granitic rock near Oracle in southern Arizona are presented to illustrate how the method works for fractured rocks. At the site, the Oracle granite is shown to respond as a near-uniform, anisotropic medium, the hydraulic conductivity of which is strongly controlled by the orientations of major fracture sets. The cross-hole test results are shown to be consistent with the results of more than 100 single-hole packer tests conducted at the site.

Water Resources Research↗