Geology Reports⌕ Search

Geology topics

Scott E.K. Bennett

Publications and source records attributed to Scott E.K. Bennett.

At least 19 recordsLinked to original sources
USGS2025

Oligocene–Miocene development and evolution of the south Dome Rock Mountains basin, lower Colorado River corridor, Arizona, USA

Sedimentary basins in the Colorado River extensional corridor record large-magnitude Basin and Range extension and younger dextral shear deformation in the evolving Pacific−North America plate boundary. The south Dome Rock Mountains basin is located in west-central Arizona (USA), where the history of basin evolution, style of deformation, and timing of the transition between extension and dextral shear are not well constrained. We integrate new geologic mapping of the south Dome Rock Mountains basin with zircon U-Pb geochronology of six marker beds to characterize the timing of basin evolution and the slip history of the south Dome Rock Mountains normal fault. Structural analysis defines structures consistent with regional extension and younger dextral shear deformation. We use sedimentological and petrological analysis to interpret the depositional environments of three basin sequences. A lower basin sequence consists of fluvial strata deposited in an internally drained intermontane basin from ca. 35 Ma to 24.4 Ma. A sequence of volcanic rocks was emplaced in the basin between 24.4 Ma and 23.3 Ma, before the onset of local extensional faulting. An upper basin sequence of coarse conglomerate and sedimentary breccia was deposited on the hanging wall of a half graben structure after 23.3 Ma and through ca. 12.8 Ma, synchronous with 3−7 km of dip slip on the west-dipping, listric south Dome Rock Mountains fault. The basin was subsequently deformed by dextral shear after 12.8 Ma and before 4.8 Ma. These results document how distributed deformation related to the evolving Pacific−North America plate boundary occurred >100 km from the primary plate boundary.

Arizona, California↗
USGS2025

New paleomagnetic constraints on the eruption timing, stratigraphy, and post-emplacement deformation of the Picture Gorge Basalt within the Columbia River Basalt Group

The Picture Gorge Basalt (PGB) is part of the Miocene Columbia River Basalt Group (CRBG). The PGB, which outcrops in eastern Oregon, is considered coincident in time with the voluminous Grande Ronde Basalt. New radiometric ages have expanded the age‐range of the PGB, suggesting it began erupting prior to the Steens Basalt to its south and continued until after cessation of the Grande Ronde Basalt eruptions, an interval of 1.5 Ma. However, the existing paleomagnetism of the PGB implies this eruption timeline is an overestimate. To reconcile the radiometric and paleomagnetic timescales for the PGB, we conducted a paleomagnetic study on sections of the PGB to construct a detailed, high‐quality magnetostratigraphy. Our data indicate the stratigraphically lowest lava flows in the PGB are of reversed polarity, revealing a new paleomagnetic transition with the PGB and a reversed (R)–normal (N)–reversed (R) sequence. This suggests one of two timeline possibilities for PGB volcanism: (a) eruptions began and during through CRBG polarity chrons R0–N0–R1, penecontemporaneous with Steens Basalt, or (b) eruptions began and persisted during CRBG polarity chrons R1–N1–R2. Our work supports a longer interval of PGB volcanism than was suggested by previous paleomagnetic data but is at odds with the suggestion that PGB eruptions lasted through the entire main CRBG. We favor a scenario wherein PGB eruptions begin with R0 and continue into the R1 paleomagnetic interval. The paleomagnetic results also record a ∼18° vertical‐axis rotation of east‐central Oregon after ∼16 Ma with respect to stable North America.

Oregon↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2023

Discovery of an active forearc fault in an urban region: Holocene rupture on the XEOLXELEK-Elk Lake fault, Victoria, British Columbia, Canada

Subduction forearcs are subject to seismic hazard from upper plate faults that are often invisible to instrumental monitoring networks. Identifying active faults in forearcs therefore requires integration of geomorphic, geologic, and paleoseismic data. We demonstrate the utility of a combined approach in a densely populated region of Vancouver Island, Canada, by combining remote sensing, historical imagery, field investigations, and shallow geophysical surveys to identify a previously unrecognized active fault, the XEOLXELEK-Elk Lake fault, in the northern Cascadia forearc, ∼10 km north of the city of Victoria. Lidar-derived digital terrain models and historical air photos show a ∼2.5-m-high scarp along the surface of a Quaternary drumlinoid ridge. Paleoseismic trenching and electrical resistivity tomography surveys across the scarp reveal a single reverse-slip earthquake produced a fault-propagation fold above a blind southwest-dipping fault. Five geologically plausible chronological models of radiocarbon dated charcoal constrain the likely earthquake age to between 4.7 and 2.3 ka. Fault-propagation fold modeling indicates ∼3.2 m of reverse slip on a blind, 50° southwest-dipping fault can reproduce the observed deformation. Fault scaling relations suggest a M 6.1–7.6 earthquake with a 13 to 73-km-long surface rupture and 2.3–3.2 m of dip slip may be responsible for the deformation observed in the paleoseismic trench. An earthquake near this magnitude in Greater Victoria could result in major damage, and our results highlight the importance of augmenting instrumental monitoring networks with remote sensing and field studies to identify and characterize active faults in similarily challenging environments.

Victoria↗
USGS2023

U-Pb zircon ages and Lu-Hf isotope systematics across northwestern Mexico: Implications for Cretaceous to Paleocene tectonomagmatic evolution during Farallon subduction

This study presents U-Pb zircon ages and Lu-Hf zircon isotope data for Cretaceous-Paleocene plutonic rocks along a W-E transect in northwestern Mexico. These data are combined with tectonic reconstruction that restores Late Cenozoic extensional deformation and shows the position of magmatism at 36 Ma. Zircon U-Pb ages results span from 142 to 58 Ma and demonstrate that the continental arc migrated northeastward at 1–2.5 km/Myr. These rates are slower than previously interpreted, but consistent with landward arc migration rates observed in the Andes. Weighted mean initial epsilon hafnium εHf( t ) values of plutonic rocks along the transect range from + 8.8 to −9.1. The heterogeneity in the zircon εHf( t ) is spatially related to the pre-Cretaceous basement provinces that the intrusive rocks were emplaced into. Zircon εHf( t ) values of western Baja California display positive values ranging from + 8.8 to + 2.6 suggesting they were formed from a moderately depleted mantle and were emplaced into the Guerrero-Alisitos-Vizcaino terrane. Zircon εHf( t ) values in the eastern part of Baja California and most of Sonora are heterogeneous ranging between −0.7 and −9.1 and may be formed from a relatively slightly more evolved mantle source and end up more evolved after crustal assimilation of metasediments. Zircon εHf( t ) values ranging from + 8.7 to + 2.9 in Chihuahua are consistent with a depleted-mantle derived melt and assimilation of Grenville lithospheric province. Our results highlight how Hf isotopic signatures help to constrain the pre-Cretaceous basement configuration in northwestern Mexico despite the few exposed outcrops along the transect.

northwestern Mexico↗
USGS2023

Evolution of Miocene normal and dextral faulting in the lower Colorado River region near Blythe, California, USA

The evolution of strain in nascent continental plate boundaries commonly involves distributed deformation and transitions between different styles of deformation as the plate boundary matures. Distributed NW-striking faults, many with km-scale right-lateral separation, are prevalent near Blythe, California, and have been variably interpreted to have accommodated either Middle Miocene NE-SW extension as normal faults or Late Miocene to Pliocene dextral shear as strike-slip faults. However, with poor timing and kinematic constraints, it is unclear how these faults relate to known domains of Neogene deformation and the evolution of the Pacific–North America plate boundary. We present kinematic data (n = 642 fault planes, n = 512 slickenlines) that demonstrate that these faults dominantly dip steeply northeast; ~96% of measured faults record normal, dextral, or oblique dextral-normal kinematics that likely reflect a gradational transition between normal and dextral oblique kinematic regimes. We constrain fault timing with 11.7 Ma and 7.0 Ma 40 Ar/ 39 Ar dates of rocks cut by faults, and laser ablation–inductively coupled plasma–mass spectrometry U-Pb dating of calcite mineralized during oblique dextral faulting that demonstrates fault slip at ca. 10–7 Ma and perhaps as late as ca. 4 Ma. This Late Miocene dextral oblique faulting is best compatible with a documented regional transition from Early to Middle Miocene NE-directed extension during detachment fault slip to subsequent NW-directed dextral shear. We estimate 11–38 km of cumulative dextral slip occurred across a 50-km-wide zone from the Palen to Riverside mountains, including up to 20 km of newly documented dextral shear that may partly alleviate the regional discrepancy of cumulative dextral shear along this part of the Late Miocene Pacific–North America plate boundary.

California↗
USGS2022

High-resolution marine seismic imaging of the Seattle fault zone: Near surface insights into fault zone geometry, Quaternary deformation, and long-term evolution

The Seattle fault zone (SFZ) is a north‐directed thrust fault system that underlies the greater Seattle metropolitan area. Evidence of past land level changes, landslides, liquefaction, and a local tsunami indicate that this 70‐km‐long fault system can host up to M 7–7.5 earthquakes. Both the geometry and earthquake recurrence of the SFZ are debated and surveys of the shallow subsurface have not yet been incorporated into deeper crustal‐scale structural interpretations, especially where the SFZ cuts across marine portions of the Puget Lowland. Here we use a new high‐resolution marine seismic reflection dataset to image fault‐related deformation in Quaternary sediments and Tertiary bedrock throughout Puget Sound and Lake Washington. We use this perspective of shallow geology as a link between existing crustal‐scale geophysical insights into fault geometry at depth and paleoseismological observations of faulting at the surface and propose a refined structural model for the SFZ. We interpret that our new seismic reflection data in the Rich Passage area of Puget Sound images evidence of an inactive, south‐dipping strand of the SFZ, which is overprinted by Quaternary folding and slip along north‐dipping backthrusts within the hanging wall of a blind, south‐dipping fault located 6 km farther north. To explain these results, we propose that the SFZ is a normal sequence fault propagation fold that has stepped northward through time, and we show the plausibility of this model through trishear forward modeling. Growth strata and faulting imaged in Quaternary sediments in Lake Washington and Rich Passage are consistent with the spatial distribution of folding and backthrusting that occurred during an M 7–7.5 earthquake in A.D. 900–930, corroborating existing evidence that the SFZ has been active throughout the Quaternary.

Bulletin of the Seismological Society of America↗
USGS2022

Microcontinent breakup and links to possible plate boundary reorganization in the northern Gulf of California, México

Faults on microcontinents record the dynamic evolution of plate boundaries. However, most microcontinents are submarine and difficult to study. Here, we show that the southern part of the Isla Ángel de la Guarda (IAG) microcontinent, in the northern Gulf of California rift, is densely faulted by a late Quaternary-active normal fault zone. To characterize the onshore kinematics of this Almeja fault zone, we integrated remote fault mapping using high-resolution satellite- and drone-based topography with neotectonic field-mapping. We produced 13 luminescence ages from sediment deposits offset or impounded by faults to constrain the timing of fault offsets. We found that north-striking normal faults in the Almeja fault zone continue offshore to the south and likely into the nascent North Salsipuedes basin southwest of IAG. Late Pleistocene and Holocene luminescence ages indicate that the most recent onshore fault activity occurred in the last ∼50 kyr. These observations suggest that the North Salsipuedes basin is kinematically linked with and continues onshore as the active Almeja fault zone. We suggest that fragmentation of the evolving IAG microcontinent may not yet be complete and that the Pacific-North America plate boundary is either not fully localized onto the Ballenas transform fault and Lower Delfin pull-apart basin or is in the initial stage of a plate boundary reorganization.

Gulf of California↗
USGS2022

Integrating Earth–life systems: A geogenomic approach

For centuries, scientists have recognized and worked to understand how Earth’s mutable landscape and climate shape the distribution and evolution of species. Here, we describe the emerging field of geogenomics, which uses the reciprocal and deep integration of geologic, climatic, and population genomic data to define and test cause–effect relationships between Earth and life at intermediate spatial and temporal scales (i.e., the mesoscale). Technological advances now power the detailed reconstruction of landscape and evolutionary histories, but transdisciplinary collaborations and new quantitative tools are needed to better integrate Earth–life data. Geogenomics can help build a more unified theory and characterize the boundary conditions under which geologic and climatic processes generate new biodiversity, how species’ responses differ, and why.

Trends in Ecology & Evolution↗
USGS2022

Paleoseismic study of the XEOLXELEK–Elk Lake fault: A newly identified Holocene fault in thenorthern Cascadia forearc near Victoria, British Columbia, Canada

High-resolution topographic data show a tectonic scarp formed in Quaternary sediments near the city of Victoria in the northern Cascadia forearc on Vancouver Island, British Columbia, Canada. A paleoseismic trench excavation across the structure, the XEOLXELEK–Elk Lake fault, shows evidence for a Holocene (after 12.2 cal ka BP) surface-rupturing reverse-slip earthquake that produced a fault-propagation fold and resulted in the formation of a ∼1.4 to 3.5 m-high scarp. Fault-propagation fold modelling indicates ∼3.2 m of reverse slip on a 50°-dipping fault plane reproduces the observed deformation, and fault-scaling relations suggest a single earthquake rupture with this surface displacement could occur during a ∼Mw 6.1– 7.6 earthquake. Given the fault’s location within the metropolitan area of Victoria, an earthquake near this magnitude would result in significant damage to local infrastructure and this fault is worth considering in future seismic hazard assessments.

Conference Paper↗
USGS2021

Tectonostratigraphic record of late Miocene–early Pliocene transtensional faulting in the Eastern California shear zone, southwestern USA

The Eastern California shear zone (ECSZ; southwestern USA) accommodates ~20%–25% of Pacific–North America relative plate motion east of the San Andreas fault, yet little is known about its early tectonic evolution. This paper presents a detailed stratigraphic and structural analysis of the uppermost Miocene to lower Pliocene Bouse Formation in the southern Blythe Basin, lower Colorado River valley, where gently dipping and faulted strata provide a record of deformation in the paleo-ECSZ. In the western Trigo Mountains, splaying strands of the Lost Trigo fault zone include a west-dipping normal fault that cuts the Bouse Formation and a steeply NE-dipping oblique dextral-normal fault where an anomalously thick (~140 m) section of Bouse Formation siliciclastic deposits filled a local fault-controlled depocenter. Systematic basinward thickening and stratal wedge geometries in the western Trigo and southeastern Palo Verde Mountains, on opposite sides of the Colorado River valley, record basinward tilting during deposition of the Bouse Formation. We conclude that the southern Blythe Basin formed as a broad transtensional sag basin in a diffuse releasing stepover between the dextral Laguna fault system in the south and the Cibola and Big Maria fault zones in the north. A palinspastic reconstruction at 5 Ma shows that the southern Blythe Basin was part of a diffuse regional network of linked right-step­ping dextral, normal, and oblique-slip faults related to Pacific–North America plate boundary dextral shear. Diffuse transtensional strain linked northward to the Stateline fault system, eastern Garlock fault, and Walker Lane, and southward to the Gulf of California shear zone, which initiated ca. 7–9 Ma, implying a similar age of inception for the paleo-ECSZ.

California↗
USGS2021

Paleoseismic trenching reveals late quaternary kinematics of the Leech River Fault: Implications for forearc strain accumulation in Northern Cascadia

New paleoseismic trenching indicates late Quaternary oblique right‐lateral slip on the Leech River fault, southern Vancouver Island, Canada, and constrains permanent forearc deformation in northern Cascadia. A south‐to‐north reduction in northward Global Navigation Satellite System velocities and seismicity across the Olympic Mountains, Strait of Juan de Fuca (JDF), and the southern Strait of Georgia, has been used as evidence for permanent north–south crustal shortening via thrust faulting between a northward migrating southern forearc and rigid northern backstop in southwestern Canada. However, previous paleoseismic studies indicating late Quaternary oblique right‐lateral slip on west‐northwest‐striking forearc faults north of the Olympic Mountains and in the southern Strait of Georgia are more consistent with forearc deformation models that invoke oroclinal bending and(or) westward extrusion of the Olympic Mountains. To help evaluate strain further north across the Strait of JDF, we present the results from two new paleoseismic trenches excavated across the Leech River fault. In the easternmost Good Hope trench, we document a vertical fault zone and a broad anticline deforming glacial till. Comparison of till clast orientations in faulted and undeformed glacial till shows evidence for postdeposition faulted till clast rotation, indicating strike‐slip shear. The orientation of opening mode fissuring during surface rupture is consistent with right‐lateral slip and the published regional S H max "> S H max SHmax directions. Vertical separation and the formation of scarp‐derived colluvium along one fault also indicate a dip‐slip component. Radiocarbon charcoal dating within offset glacial till and scarp‐derived colluvium suggest a single surface rupturing earthquake at 9.4 ± 3.4    ka "> 9.4 ± 3.4 ka 9.4±3.4 ka ⁠ . The oblique right‐lateral slip sense inferred in the Good Hope trench is consistent with slip kinematics observed on other regional west‐northwest‐striking faults and indicates that these structures do not accommodate significant north–south shortening via thrust faulting.

Washington↗
USGS2021

The Mount Hood fault zone, active faulting at the crest of the dynamic Cascade Range, north-central Oregon, USA

The Mount Hood fault zone is a N-trending, ~55-km-long zone of active faulting along the western margin of the Hood River graben in north-central Oregon. The Mount Hood fault zone occurs along the crest of the Cascade Range and consists of multiple active fault segments. It is presently unclear how much Hood River graben extension is actively accommodated on the fault zone, and how Cascade intra-arc extension accommodates regional patterns of clockwise rotation and northwest translation of crustal blocks in the Pacific Northwest region of the United States. Evidence for Holocene activity on the Mount Hood fault zone was discovered in 2009 after acquisition of high-resolution lidar topography of the area. This trip will visit sites displaying evidence of Holocene surface rupture on fault strands within the Mount Hood fault zone. Day 1 starts with a two-hour drive from Portland to Mount Hood, a 3429-m-high glaciated active volcano, where we will visit sites south of the summit along the Twin Lakes fault segment, including several fault scarps and two sites where dating of offset buried soils constrains the timing of the most recent surface-rupturing event to the Holocene. Day 1 includes two hikes of ~1 km and will be partly cross-country. The trip will overnight at the historic Timberline Lodge, an architectural masterpiece from the Civilian Conservation Corps (1933–1942) era, located at tree line on the southern flank of Mount Hood. Day 2 will visit sites north of the summit, stopping along the Blue Ridge fault segment to view the site of 2011 paleoseismic trenches and an offset glacial moraine. We will visit an unusual uphill-facing scarp in coarse talus along the Gate Creek fault segment near the north end of the Mount Hood fault zone. We will conclude Day 2 with a short hike into the Mark O. Hatfield Wilderness along the Gate Creek fault segment to view evidence of a surface-rupturing earthquake that occurred only a few centuries ago, illuminated by a nearby paleoseismic trench hand-dug in 2020. Our neotectonic and paleoseismic data are among the first efforts to document and characterize seismic sources within the Mount Hood fault zone. However, even with our new age data, fault slip rates and earthquake recurrence remain poorly constrained. With our limited earthquake timing data, it is not clear whether all segments of the Mount Hood fault zone rupture together as a ≥ M 7 earthquake, or alternatively, if the fault segments rupture independently in a sequence of smaller ~M 6–sized events.

Oregon↗
USGS2021

Arc versus river: The geology of the Columbia River Gorge

The Columbia River Gorge is the Columbia River’s long-held yet evolving passage through the volcanic arc of the Cascade Range. The globally unique setting of a continental-scale river bisecting an active volcanic arc at the leading edge of a major plate boundary creates a remarkable setting where dynamic volcanic and tectonic processes interact with diverse and energetic fluvial processes. This three-day field trip explores several elements of the gorge and its remarkable geologic history—cast here as a contest between regional tectonic and volcanic processes building and displacing landscapes, and the relentless power of the Columbia River striving to maintain a smooth passage to the sea.

Oregon, Washington↗
USGS2020

6&6: A transdisciplinary approach to art-science collaboration

Despite an historical connection between the arts and sciences, in the past century, the two disciplines have been greatly siloed. However, there is a renewed interest in collaboration across the arts and sciences to support conservation practice by understanding and communicating complex environmental, social, and cultural challenges in novel ways. 6&6 was created as a transdisciplinary art–science initiative to promote a deeper appreciation of the Sonoran Desert. Six artists and six scientists were paired to create work that explored conservation issues in the Sonoran Desert and the Gulf of California. In-depth interviews were conducted with the artists and scientists throughout the 4-year initiative to understand the impact of 6&6 on their personal and professional behaviors and outlook. The findings from this case study reveal the role that intensive, place-based, and transdisciplinary art–science programs can play in shaping narratives to better communicate the patterns and processes of nature and human–environment interactions.

Arizona, Baja California, Baja California Sur, Cal↗
USGS2020

Evidence of previous faulting along the 2019 Ridgecrest, California earthquake ruptures

The July 2019 Ridgecrest earthquake sequence in southeastern California was characterized as surprising because only ~35% of the rupture occurred on previously mapped faults. Employing more detailed inspection of pre-event high-resolution topography and imagery in combination with field observations, we document evidence of active faulting in the landscape along the entire fault system. Scarps, deflected drainages, and lineaments and contrasts in topography, vegetation, and ground color demonstrate previous slip on a dense network of orthogonal faults, consistent with patterns of surface rupture observed in 2019. Not all of these newly mapped fault strands ruptured in 2019. Outcrop-scale field observations additionally reveal tufa lineaments and sheared Quaternary deposits. Neotectonic features are commonly short (<2 km), discontinuous, and display en echelon patterns along both the M 6.4 and M 7.1 ruptures. These features are generally more prominent and better preserved outside the late Pleistocene lake basins. Fault expression may also be related to deformation style: scarps and topographic lineaments are more prevalent in areas where substantial vertical motion occurred in 2019. Where strike-slip displacement dominated in 2019, the faults are mainly expressed by less prominent tonal and vegetation features. Both the NE- and NW-trending active fault systems are subparallel to regional bedrock fabrics that were established as early as ~150 Ma, and may be reactivating these older structures. Overall, we estimate that 50-70% (i.e., an additional 15-35%) of the 2019 surface ruptures could have been recognized as active faults with detailed inspection of pre-event data. Similar detailed mapping of potential neotectonic features could help improve seismic hazard analyses in other regions of eastern California and elsewhere that have distributed faulting or incompletely mapped faults. In areas where faults cannot be resolved as single thoroughgoing structures, a zone of potential faulting should be used as a hazard model input.

California↗
USGS2020

Surface displacement distributions for the July 2019 Ridgecrest, California earthquake ruptures

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the M w "> M w 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the M w "> M w 7.1 mainshock. We present &gt; 650 "> > 650 field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the M w "> M w 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The M w "> M w 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the M w "> M w 7.1 rupture. The M w "> M w 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The M w "> M w 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the M w "> M w 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the M w "> M w 7.1 rupture. The steepest gradients ( ⁠ &#x223C; 1 &#x2013; 3 &#x2009;&#x2009; m / km "> ∼ 1 – 3 m / km ⁠ ) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 M w "> M w 7.3 Landers and 1999 M w "> M w 7.1 Hector Mine earthquakes are &lt; 0.6 &#x2009;&#x2009; m / km "> < 0.6 m / km . Our displacement distributions are important for understanding the influence of cross‐fault rupture on M w "> M w 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

California↗