Geology Reports⌕ Search

Geology topics

Scott A. Kinney

Publications and source records attributed to Scott A. Kinney.

At least 37 records · Page 2Linked to original sources

New method for correcting bottomhole temperatures acquired from wireline logging measurements and calibrated for the onshore Gulf of Mexico Basin, U.S.A.

Bottomhole temperature (BHT) measurements offer a useful way to characterize the subsurface thermal regime as long as they are corrected to represent in situ reservoir temperatures. BHT correction methods calibrated for the domestic onshore Gulf of Mexico basin were established in this study. These corrections are empirically derived and based on newly compiled databases of BHT wireline measurements and, to a lesser extent, drill stem test data. A unified BHT correction for the onshore Gulf Coast region, as well as 12 distinct BHT correction equations for each of the 12 physiographic provinces within the onshore Gulf Coast region, are provided. This study also characterizes the geothermal gradient across the onshore Gulf of Mexico basin, which ranges from 1.89 degrees Fahrenheit per 100 feet in the Sabine Uplift area to 1.39 degrees Fahrenheit per 100 feet in the Southern Louisiana Salt Basin. This report disseminates the slides presented at the 68th annual convention of the Gulf Coast Association of Geological Societies and the Gulf Coast Section of the Society of Economic Paleontologists and Mineralogists that was held September 30–October 2, 2018, in Shreveport, Louisiana.

Alabama, Arkansas, Louisiana, Mississippi, Texas↗

Assessment of coal resources and reserves in the Little Snake River coal field and Red Desert assessment area, Greater Green River Basin, Wyoming

The assessment of the Little Snake River coal field and Red Desert area covers approximately 2,300 square miles in the eastern portion of the Greater Green River Basin in south-central Wyoming. Coal-bearing formations are present throughout the Eocene, Paleocene, and Cretaceous strata in the assessment area. Paleogene-age coal beds are present in the Eocene Wasatch Formation and Paleocene Fort Union Formation. Cretaceous-age coal beds are present in the Lance, Almond, and Allen Ridge Formations. Utilizing over 4,000 data points, 55 individual coal beds were identified in the assessment area. Coal resources were calculated using geologic models generated from these data points, using criteria for minimum thickness and areal extent. The geologic modeling criteria indicated that 33 of the 55 individual coal beds had sufficient thickness and areal extent to be economically significant. Calculated original coal resources within the assessment area were approximately 73.2 billion short tons (BST). After excluding coal resources lost due to land use and technical restrictions, recoverable coal resources were approximately 19.37 BST, including 2.14 BST of coal resources that could be extracted using surface mining methods and 17.23 BST of coal resources that could be extracted using underground mining methods. Due to mining costs and projected low potential sales value of the coal resources, only approximately 167 million short tons (MST) can be classified as reserves, which is less than 1 percent of the recoverable coal resources

Wyoming↗

Coal geology and assessment of resources and reserves in the Little Snake River Coal Field and Red Desert Assessment Area, Greater Green River Basin, Wyoming

The U.S. Geological Survey is studying regional-scale assessments of resources and reserves of primary coal beds in the major coal bed basins in the United States to help formulate policy for Federal, State, and local energy and land use. This report summarizes the geology and coal resources and reserves in the Little Snake River coal field and Red Desert assessment area in the Greater Green River Basin, southwestern Wyoming. These areas are contiguous and referred to as the “assessment area” in this report. The assessment area covers about 2,300 square miles of the eastern section of the 15,400-square-mile Greater Green River Basin. This area was prioritized for assessment because no comprehensive resource assessment had previously been completed in the area; abundant, previously unavailable drill hole data from cooperators and stakeholders became available; and there are active coal mines in the Greater Green River Basin area producing from some of the same formations as those found in the assessment area. Coal-bearing Eocene, Paleocene, and Upper Cretaceous formations have a composite thickness of more than 11,000 feet in the assessment area. Stratigraphic sequences that contain multiple coal beds within a formation or member are referred to as coal zones in this report. Paleogene coal beds are found within coal zones in the Eocene Wasatch Formation and the Paleocene Fort Union Formation. Cretaceous coal beds are within coal zones in the Lance, Almond, and Allen Ridge Formations. A total of 4,214 drill holes and measured sections were used to construct a geologic database for this assessment. From these data, 7 coal zones containing 55 individual coal beds were identified. Not all 55 coal beds were assessed; only those beds that were at least 3 feet thick and had at least a 2-square-mile areal extent were considered. Using a geology-based assessment methodology, the U.S. Geological Survey estimated original, available, and recoverable coal resources for 33 coal beds that met those criteria. An original resource of 73.2 billion short tons of coal was calculated for the 33 coal beds that met the criteria in the assessment area. To be considered extractable by surface mining methods, coal beds had to be equal to or greater than 3 feet thick and less than 300 feet deep. Of the 73.2 billion short tons (BST), 19.3 BST were determined to be recoverable resources, of which approximately 2.1 BST were considered as recoverable resources by surface mining methods at a stripping ratio of 10:1 or less. (defined as recoverable resources for this assessment, based on economic modeling and regional mining analogs). Recoverable resources for underground mining methods (coal 8 to 15 feet thick and between 300 and 3,000 feet deep) totaled 17.2 BST. Out of the 19.3 BST assessed as recoverable coal resources, approximately 167 million short tons (MST) were considered to be reserves. Within the 7 coal zones, the Wasatch coal zone contains an original resource of about 6.8 BST billion short tons of coal, of which 2.6 BST are considered a recoverable resource and approximately 26.7 MST are considered reserves. The Overland coal zone, in the Fort Union Formation, contains an original resource of approximately 23 BST of coal, of which 8.4 BST are considered a recoverable resource and approximately 74 MST are considered reserves. The China Butte coal zone, in the Fort Union Formation, contains an original resource of 36.2 BST of coal, of which 6.3 BST are considered a recoverable resource and approximately 5.5 MST are considered reserves. The Almond coal zone, in the Almond Formation, contains an original resource of 7.0 BST, of which approximately 2.0 BST are considered a recoverable resource and 61 MST are considered reserves. Resources were not calculated for the coal zones within the Niland Tongue of the Wasatch Formation or the Cretaceous Lance and Allen Ridge Formations because the coal beds in those zones are relatively thin, discontinuous, and have a limited areal extent.

Wyoming↗

Assessment of continuous oil resources in the Eastern Great Basin Province of Nevada, Utah, and Idaho, 2018

The U.S. Geological Survey (USGS) quantitatively assessed the potential for undiscovered, technically recoverable continuous oil and gas resources in the Eastern Great Basin Province (Anna and others, 2007) of Nevada, Utah, and Idaho (fig. 1). The assessment focused on the area of the province between the Roberts Mountains and Sevier thrust systems (Peterson, 1994). The major petroleum source rocks within this area are the Upper Devonian–Lower Mississippian Pilot Shale and the Mississippian Chainman Formation (Gutschick and Rodriquez, 1979; Poole and Claypool, 1984; Giles, 1994; Trexler and others, 1995). The geologic model applied to the Pilot Shale and shales in the Chainman Formation is for these shales to have achieved generative maturity for oil by burial to at least 8,700 feet (2,652 meters) within some of the Neogene extensional basins (Grabb, 1994; Anna and others, 2007). Areas that satisfy this depth requirement were defined using modeled gravity data that were calibrated to the petroleum system in Railroad Valley and Pine Valley in Nevada (Barker and Peterson, 1991; Ïnan and Davis, 1994; Meissner, 1995; Anna and others, 2007).

Idaho, Nevada, Utah↗

U.S. Geological Survey input-data forms for the assessment of the Upper Jurassic Haynesville Formation, U.S. Gulf Coast, 2016

Introduction In 2016, the U.S. Geological Survey (USGS) completed an updated assessment of undiscovered, technically recoverable oil and gas resources in the Upper Jurassic Haynesville Formation of the onshore U.S. Gulf Coast Province (Paxton and others, 2017). The Haynesville Formation was assessed using both the standard continuous (unconventional) and conventional methodologies established by the USGS for four assessment units (AUs): (1) Haynesville Western Shelf Carbonate Gas and Oil AU, (2) Haynesville Eastern Shelf Sandstone and Carbonate Oil and Gas AU, (3) Haynesville Shale Continuous Gas AU, and (4) Haynesville Shale Peripheral Continuous Gas AU. The revised assessment resulted in total estimated mean resources of 1.1 billion barrels of oil, 195.8 trillion cubic feet of gas, and 866 million barrels of natural gas liquids. The purpose of this report is to provide supplemental documentation of the input parameters used in the USGS 2016 Haynesville Formation assessment.

Open-File Report↗

U.S. Geological Survey input-data forms for the assessment of the Upper Jurassic Bossier Formation, U.S. Gulf Coast, 2016

Introduction In 2016, the U.S. Geological Survey (USGS) completed an updated assessment of undiscovered, technically recoverable oil and gas resources in the Upper Jurassic Bossier Formation of the onshore U.S. Gulf Coast Province (Paxton and others, 2017). The Bossier Formation was assessed using both the standard continuous (unconventional) and conventional methodologies established by the USGS for three assessment units (AUs): (1) Bossier Eastern Shelf Sandstone Gas and Oil AU, (2) Bossier Western Shelf Sandstone Gas AU, and (3) Bossier Shale Continuous Gas AU. A fourth assessment unit, the Upper Jurassic Downdip Continuous Gas AU, was also defined but was not quantitatively assessed because of limited well data within the extent of the AU. The revised assessment resulted in total estimated mean resources of 2.9 billion barrels of oil, 108.6 trillion cubic feet of gas, and 1.1 billion barrels of natural gas liquids. The purpose of this report is to provide supplemental documentation of the input parameters used in the USGS 2016 Bossier Formation assessment.

Open-File Report↗

Assessment of undiscovered oil and gas resources in the Eagle Ford Group and associated Cenomanian–Turonian Strata, U.S. Gulf Coast, Texas, 2018

Using a geology-based assessment methodology, the U.S. Geological Survey estimated undiscovered, technically recoverable mean resources of 8.5 billion barrels of oil and 66 trillion cubic feet of gas in continuous accumulations in the Upper Cretaceous Eagle Ford Group and associated Cenomanian–Turonian strata in onshore lands of the U.S. Gulf Coast region, Texas.

Louisiana, Texas↗

Methodology for correcting bottomhole temperatures acquired from wireline logging measurements in the onshore U.S. Gulf of Mexico Basin to characterize the thermal regime of total petroleum systems

Characterization of the subsurface thermal regime is critical for understanding many facets of the petroleum system, from thermal maturation of organic-rich source rocks to thermal preservation and non-degradation of hydrocarbon accumulations. On a broad scale, paleo-heatflow has been mapped for the North American continent (Blackwell and Richards, 2004) as well as the contiguous United States (Blackwell et al., 2011). However, in situ reservoir temperature is a fundamental property (Cooper and Jones, 1959) that is difficult to accurately measure in the subsurface (Deming, 1989). Previous work has described the thermal regime of the offshore U.S. Gulf of Mexico Basin (Waples et al., 2004; Forrest et al., 2005; Nagihara and Jones, 2005; Husson et al., 2008); however, due to the lack of an applicable bottomhole temperature (BHT) correction method, virgin rock temperatures of the onshore portion of the basin remains largely uncharacterized in a regional or subregional context. The abundance of BHT measurements offers a useful way to characterize the subsurface thermal environment, provided that they are corrected to reflect the reservoir temperature. This study develops BHT correction methods that are specifically calibrated for the onshore U.S. Gulf of Mexico Basin. These BHT corrections are empirically derived and are based on a newly compiled database of temperatures obtained from BHT wireline measurements and, to a lesser extent, from drill stem test (DST) data. The results of this investigation provide a unified BHT correction methodology for the onshore U.S. Gulf of Mexico Basin as well as provide 12 distinct BHT correction equations for each of the 12 physiographic provinces within the onshore Gulf Coast region. This study also characterizes the geothermal gradient regime across the onshore U.S. Gulf Coast, which ranges from 1.89ºF/100 ft in Sabine Uplift area to 1.39ºF/100 ft in the Southern Louisiana Salt Basin.

Gulf of Mexico Basin↗

Assessment of water and proppant quantities associated with petroleum production from the Bakken and Three Forks Formations, Williston Basin Province, Montana and North Dakota, 2016

The U.S. Geological Survey (USGS) has completed an assessment of water and proppant requirements and water production associated with the possible future production of undiscovered oil and gas resources in the Three Forks and Bakken Formations (Late Devonian to Early Mississippian) of the Williston Basin Province in Montana and North Dakota. This water and proppant assessment is directly linked to the geology-based assessment of the undiscovered, technically recoverable continuous oil and gas resources that is described in USGS Fact Sheet 2013–3013.

Montana, North Dakota↗

Estimating thermal maturity in the Eagle Ford Shale petroleum system using gas gravity data

Basin-wide datasets that provide information on the geochemical properties of petroleum systems, such as source rock quality, product composition, and thermal maturity, are often difficult to come by or assemble from publicly available data. When published studies are available and include these kinds of properties, they generally have few sampling locations and limited numbers and types of analyses. Therefore, production-related data and engineering parameters can provide useful proxies for geochemical properties that are often widely available across a play and in some states are reported in publicly available or commercial databases. Gas-oil ratios (GOR) can be calculated from instantaneous or cumulative production data and can be related to the source rock geochemical properties like kerogen type (Lewan and Henry, 1999) and thermal maturity (Tian et al., 2013; U.S. Energy Information Administration [EIA], 2014). Oil density or specific gravity (SG), often reported in American Petroleum Institute units (°API = 141.5 /SG – 131.5), can also provide information on source rock thermal maturity, particularly when combined with GOR values in unconventional petroleum systems (Nesheim, 2017).

Gulf Coast Association of Geological Societies Tra↗

Assessment of undiscovered oil and gas resources in sandstone reservoirs of the Cotton Valley Group, U.S. Gulf Coast, 2015

Using a geology-based assessment methodology, the U.S. Geological Survey estimated undiscovered mean volumes of 14 million barrels of conventional oil, 430 billion cubic feet of conventional gas, 34,028 billion cubic feet of continuous gas, and a mean total of 391 million barrels of natural gas liquids in sandstone reservoirs of the Upper Jurassic–Lower Cretaceous Cotton Valley Group in onshore lands and State waters of the U.S. Gulf Coast region.

Cotton Valley Group, Gulf Coast↗

Geospatial data for coal beds in the Powder River Basin, Wyoming and Montana

The purpose of this report is to provide geospatial data for various layers and themes in a Geographic Information System (GIS) format for the Powder River Basin, Wyoming and Montana. In 2015, as part of the U.S. Coal Resources and Reserves Assessment Project, the U.S. Geological Survey (USGS) completed an assessment of coal resources and reserves within the Powder River Basin, Wyoming and Montana. This report is supplemental to USGS Professional Paper 1809 and contains GIS data that can be used to view digital layers or themes, including the Tertiary limit of the Powder River Basin boundary, locations of drill holes, clinker, mined coal, land use and technical restrictions, geology, mineral estate ownership, coal thickness, depth to the top of the coal bed (overburden), and coal reliability categories. Larger scale maps may be viewed using the GIS data provided in this report supplemental to the page-size maps provided in USGS Professional Paper 1809. Additionally, these GIS data can be exported to other digital applications as needed by the user. The database used for this report contains a total of 29,928 drill holes, of which 21,393 are in the public domain. The public domain database is linked to the geodatabase in this report so that the user can access the drill-hole data through GIS applications. Results of this report are available at the USGS Energy Resources Program Web site, http://energy.usgs.gov/RegionalStudies/PowderRiverBasin.aspx .

Montana, Wyoming↗