Geology Reports⌕ Search

Geology topics

S. Penland

Publications and source records attributed to S. Penland.

11 recordsLinked to original sources
USGS2004

Morphologic and stratigraphic evolution of muddy ebb-tidal deltas along a subsiding coast: Barataria Bay, Mississippi River delta

The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea-level rise (1??03 cm year-1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km2 since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross-sections and prograding ebb-tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2??2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb-tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey-brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75-100%) compared with the distal delta sediments (60-80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb-tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb-tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb-tidal delta lithosome is presently no more than 5 m thick and is generally only 2-3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine-grained sedimentation seaward of the inlets and the encasement of the ebb-tidal delta lithosome in mud. The ebb-tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand-rich coasts by their muddy content and lack of large-scale stratification produced by channel cut-and-fills and bar migration. ?? 2004 International Association of Sedimentologists.

Sedimentology↗
USGS1991

Geologic controls on the formation and evolution of quaternary coastal deposits of the northern Gulf of Mexico

A study of the barrier islands and wetlands in the deltaic plain of Louisiana is presented. Its purpose was to document rapid changes and to learn more about the processes responsible and the geologic framework within which they operate. It included systematic collection and analysis of precision nearshore hydrographic data, high resolution seismic profiles, surface sediment samples, continuous vibracores, digital shoreline plots, records of storm overwash events, and analysis of tide gage records to quantify the rise in relative sea level. Results from these studies demonstrate that deltaic progradation, river channel switching, and subsequent rapid erosion accompanying the marine transgression are regular and predictable events along the Mississippi River delta plain and will likely continue in the future. Mitigation measures, such as shoreline nourishment and barrier restoration, that mimic the natural processes may slow the land loss.

Conference Paper↗
USGS1989

Preliminary assessments of the occurrence and effects of utilization of sand and aggregate resources of the Louisiana inner shelf

Louisiana is experiencing the most critical coastal erosion and land loss problem in the United States. Shoreline erosion rates exceed 6 m/yr in more than 80% of the Louisiana coastal zone and can be up to 50 m/yr in areas impacted by hurricanes. The barrier islands have decreased in area by some 40% since 1880. Land loss from coastal marshlands and ridgelands from both natural and human-induced processes is estimated to exceed 100 km 2 /yr. In response, a two-phase plan has been established, calling for barrier-island restoration and beach nourishment, both requiring large amounts of sand. The plan will be cost-effective only if sand can be found offshore in sufficient quantities close to project sites. To locate such deposits, the Louisiana Geological Survey is conducting an inventory of nearshore sand resources on the Louisiana continental shelf. Exploration for offshore sand deposits is conducted in two phases, with high-resolution seismic reflection profiling to locate potential sand bodies followed by vibracoring to confirm seismic intepretations and obtain samples for textural characterization. As part of the initial stages of the program, reconnaissance high-resolution seismic investigations of three areas of the continental shelf representing different stages in the evolutionary sequence of barrier shorelines were carried out. The Timbalier Islands, flanking barriers of the eroding Caminada-Moreau headland, contain potential sand resources associated with buried tidal and distributary channels. The Chandeleur Islands, a barrier-island arc, have potential offshore sands in the form of truncated spit and tidal inlet deposits, submerged beach ridges, and distributary channels. Trinity Shoal, an inner shelf shoal, is an offshore feature containing up to 2 × 10 9 m 3 of material, most of which is probably fine sand.

Marine Geology↗
USGS1989

The geomorphology of the Mississippi River chenier plain

The chenier plain of the Mississippi River is a shore-parallel zone of alternating transgressive clastic ridges separated by progradational mudflats. The term chenier is derived from the cajun term chene for oak, the tree species that colonizes the crests of the higher ridges. The Mississippi River chenier plain stretches 200 km from Sabine Pass, Texas, to Southwest Point, Louisiana and ranges between 20 and 30 km wide, with elevations of 2–6 m. The timing and the process of formation could be re-evaluated in the light of new chronostratigraphic findings in the Mississippi River delta plain. The stratigraphic relationship between the Teche and Lafourche delta complexes and Ship Shoal offshore indicates that these delta complexes belong to different delta plains that developed at different sealevels. It appears that the Teche delta complex is associated with the late Holocene delta plain which developed 7000 to 3000 yrs B.P. when sealevel stood 5–6 m lower than present. A regional transgression occurred between approximately 3000 BP and 2500 yrs B.P., leading to the transgressive submergence of the late Holocene delta plain, producing the regional Teche shoreline. The timing of this transgression conforms to the age of the most landward ridge in the chenier plain, the Little Chenier-Little Pecan Island trend, which dates at about 2500 yrs B.P. This ridge trend was originally interpreted as representing the Teche delta complex switching event with the landward Holocene/Pleistocene contact representing the high stand shoreline. The implication of this new interpretation is that the Little Chenier-Little Pecan Island trend represents the high stand shoreline, a continuation of the Teche shoreline separating the late Holocene and Recent delta plains, and that the Holocene/Pleistocene contact represents the leading edge of the marshes transgressing onto the Prairie Terrace. Significant mudflat progradation seems to require a westerly position of the Mississippi River, but the numerous different forms and ages of cheniers do not correspond well to the timing of major delta complex switching. Progradation of the chenier plain appears to be associated with building of the Recent delta plain and not the Teche complex of the late Holocene delta plain. The occurrence of individual ridges appears to be primarily tied to delta lobe switching within the Lafourche complex and variations in sediment supply from local rivers. The recent development of the Atchafalaya delta complex to the west is the closest position of an active distributary to the chenier plain since sealevel stabilization; a new episode of rapid mudflat progradation is thus taking place.

Marine Geology↗
USGS1988

Rapid dune changes associated with overwash processes on the deltaic coast of South Louisiana

The Caminada-Moreau barrier headland of South Louisiana is a low-profile beach and dune coastline that is transgressing rapidly over the surfaces of the abandoned Lafourche delta complex. With the passage of cold fronts (10–30 times per year) and hurricanes (once every 4 yrs), overwash events occur year round with varying degrees of frequency, intensity and geomorphological modification. This coastline consists of washover and dune surfaces that respond rapidly to overwash impact. The fine sand stored in washover deposits is easily reworked by aeolian processes into a variety of dune forms in the shore-zone that are vegetated rapidly. Geomorphological changes vary according to the position, ground elevation, and surface stability of the dunes. Independent factors are overwash surge elevations, beach gradient and the presence of pre-existing landforms. For ten years detailed surveys supplemented by aerial photographs and videotape surveys have recorded these changes. The analysis of these information sources provides insight into both the general evolution of this distinctive coastline and also the geomorphological interaction of dunes, beaches and washover deposits in different physiographic settings.

Marine Geology↗
USGS1984

Control of barrier island shape by inlet sediment bypassing: East Frisian Islands, West Germany

A study of the East Frisian Islands has shown that the plan form of these islands can be explained by processes of inlet sediment bypassing. This island chain is located on a high wave energy, high tide range shoreline where the average deep-water significant wave height exceeds 1.0 m and the spring tidal range varies from 2.7 m at Juist to 2.9 m at Wangerooge. An abundant sediment supply and a strong eastward component of wave power (4.4 × 10 3 W m −1 ) have caused a persistent eastward growth of the barrier islands. The eastward extension of the barriers has been accommodated more by inlet narrowing, than by inlet migration. It is estimated from morphological evidence that a minimum of 2.7 × 10 5 m 3 of sand is delivered to the inlets each year via the easterly longshore transport system. Much of this sand ultimately bypasses the inlets in the form of large, migrating swash bars. The location where the swash bars attach to the beach is controlled by the amount of overlap of the ebb-tidal delta along the downdrift inlet shoreline. The configuration of the ebb-tidal delta, in turn, is a function of inlet size and position of the main ebb channel. The swash bar welding process has caused preferential beach nourishment and historical shoreline progradation. Along the East Frisian Islands this process has produced barrier islands with humpbacked, bulbous updrift and bulbous downdrift shapes. The model of barrier island development presented in this paper not only explains well the configuration of the German barriers but also the morphology of barriers along many other mixed energy coasts.

East Frisian Islands↗
USGS1984

Shoreface translation and the Holocene stratigraphic record: Examples from Nova Scotia, the Mississippi Delta and eastern Australia

Classic descriptive models of barrier sedimentation have been developed with data from the Atlantic and Gulf coasts of the United States. These models are dominated by low to moderate rates of relative sea level (RSL) rise and wave energy. Barriers respond by landward recycling of sediment through the mechanism of shoreface retreat. Sedimentation processes on the central coast of New South Wales (N.S.W.), Australia, consist of rapid RSL rise in early Holocene times followed by a stillstand since 6500 B.P. Wave energy is relatively high year-round and sand sources for barrier formation are only found on the inner shelf. Barrier sedimentation on the central coast of N.S.W. exhibits a thick, composite sequence composed of a basal marine transgressive sand overlain by regressive beach and dune facies. The Louisiana coast surrounding the Mississippi delta is underlain by compacting deltaic muds which generate very rapid rates of RSL rise. The Louisiana coast experiences low wave energy punctuated by high-energy tropical and extra-tropical storm events. Barrier sediments accumulate from the erosion of deltaic headlands and undergo a transformation from subaerial barrier island systems to subaqueous shoals located on the inner shelf. Drumlins experience coastal erosion on the Eastern Shore of Nova Scotia and provide a sediment source for compartmented estuary mouth barriers. An ongoing, moderate rise of RSL results from the passage of a glacial forebulge. Wave energy is intermediate between Louisiana and N.S.W. and displays a seasonal pattern dominated by frequent winter storms. Coastal barrier sedimentation is episodic, consisting of a period of beach ridge progradation followed by barrier destruction and re-establishment further landward. The three contrasting sedimentary sequences found in examples from Louisiana, N.S.W. and Nova Scotia indicate that presently available sedimentation models from locations such as the middle Atlantic or Texas coasts of the United States may only represent well-documented regional case studies. A true generalised coastal sedimentation model is required which can identify the parameters controlling vertical and horizontal translation of the depositional surface and provide relationships between these parameters which quantitatively predict the genesis, distribution and geometry of coastal sedimentary facies.

Marine Geology↗