Geology topics

S. Murchie

Publications and source records attributed to S. Murchie.

6 recordsLinked to original sources

USGS2010

Mineralogy and stratigraphy of phyllosilicate-bearing and dark mantling units in the greater Mawrth Vallis/west Arabia Terra area: Constraints on geological origin

Analyses of MRO/CRISM images of the greater Mawrth Vallis region of Mars affirm the presence of two primary phyllosilicate assemblages throughout a region ∼1000 × 1000 km. These two units consist of an Fe/Mg-phyllosilicate assemblage overlain by an Al-phyllosilicate and hydrated silica assemblage. The lower unit contains Fe/Mg-smectites, sometimes combined with one or more of these other Fe/Mg-phyllosilicates: serpentine, chlorite, biotite, and/or vermiculite. It is more than 100 m thick and finely layered at meter scales. The upper unit includes Al-smectite, kaolin group minerals, and hydrated silica. It is tens of meters thick and finely layered as well. A common phyllosilicate stratigraphy and morphology is observed throughout the greater region wherever erosional windows are present. This suggests that the geologic processes forming these units must have occurred on at least a regional scale. Sinuous ridges (interpreted to be inverted channels) and narrow channels cut into the upper clay-bearing unit suggesting that aqueous processes were prevalent after, and possibly during, the deposition of the layered units. We propose that layered units may have been deposited at Mawrth Vallis and then subsequently altered to form the hydrated units. The Fe/Mg-phyllosilicate assemblage is consistent with hydrothermal alteration or pedogenesis of mafic to ultramafic rocks. The Al-phyllosilicate/hydrated silica unit may have formed through alteration of felsic material or via leaching of basaltic material through pedogenic alteration or a mildly acidic environment. These phyllosilicate-bearing units are overlain by a darker, relatively unaltered, and indurated material that has probably experienced a complex geological history.

Journal of Geophysical Research↗

USGS2002

Eros: Shape, topography, and slope processes

Stereogrammetric measurement of the shape of Eros using images obtained by NEAR's Multispectral Imager provides a survey of the major topographic features and slope processes on this asteroid. This curved asteroid has radii ranging from 3.1 to 17.7 km and a volume of 2535±20 km 3 . The center of figure is within 52 m of the center of mass provided by the Navigation team; this minimal difference suggests that there are only modest variations in density or porosity within the asteroid. Three large depressions 10, 8, and 5.3 km across represent different stages of degradation of large impact craters. Slopes on horizontal scales of ∼300 m are nearly all less than 35°, although locally scarps are much steeper. The area distribution of slopes is similar to those on Ida, Phobos, and Deimos. Regions that have slopes greater than 25° have distinct brighter markings and have fewer large ejecta blocks than do flatter areas. The albedo patterns that suggest downslope transport of regolith have sharper boundaries than those on Phobos, Deimos, and Gaspra. The morphology of the albedo patterns, their lack of discrete sources, and their concentration on steeper slopes suggest transport mechanisms different from those on the previously well-observed small bodies, perhaps due to a reduced relative effectiveness of impact gardening on Eros. Regolith is also transported in talus cones and in connected, sinuous paths extending as much as 2 km, with some evident as relatively darker material. Talus material in at least one area is a discrete superposed unit, a feature not resolved on other small bodies. Flat-floored craters that apparently contain ponded material also suggest discrete units that are not well mixed by impacts.

Icarus↗

USGS2001

The landing of the NEAR-Shoemaker spacecraft on asteroid 433 Eros

The NEAR-Shoemaker spacecraft was designed to provide a comprehensive characterization of the S-type asteroid 433 Eros (refs 1-3), an irregularly shaped body with approximate dimensions of 34 ?? 13 ?? 13 km. Following the completion of its year-long investigation, the mission was terminated with a controlled descent to its surface, in order to provide extremely high resolution images. Here we report the results of the descent on 12 February 2001, during which 70 images were obtained. The landing area is marked by a paucity of small craters and an abundance of 'ejecta blocks'. The properties and distribution of ejecta blocks are discussed in a companion paper. The last sequence of images reveals a transition from the blocky surface to a smooth area, which we interpret as a 'pond'. Properties of the 'ponds' are discussed in a second companion paper. The closest image, from an altitude of 129 m, shows the interior of a 100-m-diameter crater at 1-cm resolution.

Nature↗

USGS2001

Imaging of small-scale features on 433 Eros from NEAR: Evidence for a complex regolith

On 25 October 2000, the Near Earth Asteroid Rendevous (NEAR)-Shoemaker spacecraft executed a low-altitude flyover of asteroid 433 Eros, making it possible to image the surface at a resolution of about 1 meter per pixel. The images reveal an evolved surface distinguished by an abundance of ejecta blocks, a dearth of small craters, and smooth material infilling some topographic lows. The subdued appearance of craters of different diameters and the variety of blocks and different degrees of their burial suggest that ejecta from several impact events blanketed the region imaged at closest approach and led to the building up of a substantial and complex regolith consisting of fine materials and abundant meter-sized blocks.

Science↗

USGS1994

Galileo Photometry of Asteroid 951 Gaspra

Galileo images of Gaspra make it possible for the first time to determine a main-belt asteroid's photometric properties accurately by providing surface-resolved coverage over a wide range of incidence and emission angles and by extending the phase angle coverage to phases not observable from Earth. We combine Earth-based telescopic photometry over phase angles 2° ≤ α ≤ 25° with Galileo whole-disk and disk-resolved data at 33° ≤ α ≤ 51° to derive average global photometric properties in terms of Hapke's photometric model. The microscopic texture and particle phase-function behavior of Gaspra's surface are remarkably like those of other airless rocky bodies such as the Moon. The macroscopic surface roughness parameter, θ̄ = 29°, is slightly larger than that reported for typical lunar materials. The particle single scattering albedo, ώ 0 = 0.36 ± 0.07, is significantly larger than for lunar materials, and the opposition surge amplitude, B 0 = 1.63 ± 0.07, is correspondingly smaller. We determine a visual geometric albedo p v = 0.22 ± 0.06 for Gaspra, in close agreement with p v = 0.22 ± 0.03 estimated from Earth-based observations. Gaspra's phase integral is 0.47, and the bolometric Bond albedo is estimated to be 0.12 ± 0.03. An albedo map derived by correcting Galileo images with our average global photometric function reveals subdued albedo contrasts of ±10% or less over Gaspra's northern hemisphere. Several independent classification algorithms confirm the subtle spectral heterogeneity reported earlier (S. Mottola, M. DiMartino, M. Gonano-Beurer, H. Hoffman, and G. Neukum, 1993, Asteroids, Comets, Meteors, pp. 421-424; M. J. S. Belton et al ., 1992, Science 257, 1647-1652). Whole-disk colors (0.41 ≤ λ ≤ 0.99 μm) vary systematically with longitude by about ±5%, but color differences as large as 30% occur locally. Colors vary continuously between end-member materials whose areal distribution correlates with regional topography. Infrared: violet (0.99:0.41-μm) color ratios on Gaspra are strongly correlated with local elevation, being largest at lower elevations and smaller at higher elevations. No correlation was detected between elevation and the green:violet (0.56:0.41-μm) color ratio. Bright materials with a strong 1-μm absorption occur primarily in association with craters along ridges, while darker materials with 30% weaker 1-μm signatures occur downslope. The variations of color and albedo cannot be easily explained by grain-size effects alone or by differences in photometric geometry. The trends observed are consistent with those revealed by laboratory studies of the effects of comminution, glass formation, and segregation of metal from silicate components in chondritic meteorites and also in some silicate mixtures. The relative importance of these various processes on Gaspra remains to be determined.

Icarus↗

USGS1992

Galileo encounter with 951 Gaspra: First pictures of an asteroid

Galileo images of Gaspra reveal it to be an irregularly shaped object (19 by 12 by 11 kilometers) that appears to have been created by a catastrophic collisional disruption of a precursor parent body. The cratering age of the surface is about 200 million years. Subtle albedo and color variations appear to correlate with morphological features: Brighter materials are associated with craters especially along the crests of ridges, have a stronger 1-micrometer absorption, and may represent freshly excavated mafic materials; darker materials exhibiting a significantly weaker 1-micrometer absorption appear concentrated in interridge areas. One explanation of these patterns is that Gaspra is covered with a thin regolith and that some of this material has migrated downslope in some areas.

Science↗