Geology topics

Rosalyn K. Hayward

Publications and source records attributed to Rosalyn K. Hayward.

8 recordsLinked to original sources

USGS2018

Image mosaic and topographic maps of Mercury

Map Descriptions Sheet 1 : This image mosaic is based on observations acquired by the Mercury Dual Imaging System (MDIS; Hawkins and others, 2009), an instrument on the National Aeronautics and Space Agency (NASA) MErcury Surface, Space ENvironment, Geochemistry, and Ranging (MESSENGER) spacecraft (Solomon and others, 2007). The Mercator projection is used between latitudes ±57°, with a central meridian at 0° longitude and latitude equal to the nominal scale at 0°. The polar stereographic projection is used for the regions north of the +55° parallel and south of the –55° parallel, with a central meridian set for both at 0° and a latitude of true scale at +90° and –90°, respectively. All features greater than 100 km in diameter or length were included unless they were not visible at the printed map scale. Some selected well-known features less than 100 km in diameter or length were also included. For listed references, please open the full PDF. Sheet 2 : This map is based on data acquired by the Mercury Dual Imaging System (MDIS; Hawkins and others, 2009) and Mercury Laser Altimeter (MLA; Cavanaugh and others, 2007) instruments on the National Aeronautics and Space Agency (NASA) MErcury Surface, Space ENvironment, Geochemistry, and Ranging (MESSENGER) spacecraft (Solomon and others, 2007). The topographic shaded-relief maps were generated from the original MDIS- and MLA-based DEMs with a sun angle of 45° from horizontal and a sun azimuth of 270°, as measured clockwise from north, with no vertical exaggeration. The DEM values were then mapped to a global color look-up table, with each color representing a range of 1 km of elevation. The shaded-relief and color files were then merged and scaled to 1:20,000,000 for the Mercator portion and 1:12,157,366 for the two polar stereographic parts with a resolution of 300 pixels per inch. The two projections have a common scale at ±56° latitude. The Mercator projection is used between latitudes ±57°, with a central meridian at 0° longitude and latitude equal to the nominal scale at 0°. The polar stereographic projection is used for the regions north of the +55° parallel and south of the –55° parallel, with a central meridian set for both at 0° and a latitude of true scale at +90° and –90°, respectively. All features greater than 200 km in diameter or length were included unless they were not visible at the printed map scale. Some selected well-known features less than 200 km in diameter or length were also included. Sheet 2 is offered digitally as a layered PDF with two elevation color ramp options—the original printed version and a multicolored ramp developed by the MESSENGER team for their global products. For listed references, please open the full PDF.

Scientific Investigations Map↗

USGS2018

Mars global digital dune database (MGD3)—Composition, stability, and thermal inertia

The Mars Global Digital Dune Database (MGD 3 ) is an online repository that has catalogued dune fields larger than 1 km 2 located between latitudes 90° N. and 90° S. The work presented here expands upon previous MGD3 open-file reports, with a new emphasis upon characterizing dune fields through composition, stability, and thermal inertia. Included in this latest addition is a detailed compositional analysis and the associated observational data from Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES) for dune fields 300 km 2 or larger; a near-global dune stability assessment; Mars Odyssey (MO1) Thermal Emission Imaging System (THEMIS) apparent thermal inertia values; and vertical near-surface thermophysical heterogeneities determined by fitting a two-layer thermal model to observed temperatures. These additional datasets are divided into two workbooks: equatorial and south polar regions. A detailed description for the layout of these workbooks can be found in the corresponding metadata document. The continuing goal of the MGD 3 is to provide a reliable and multifaceted repository of data for Mars’ dunes, with the intention that such data be easily accessible and useful to future research.

Open-File Report↗

USGS2015

Image mosaic and topographic map of the moon

Sheet 1: This image mosaic is based on data from the Lunar Reconnaissance Orbiter Wide Angle Camera (WAC; Robinson and others, 2010), an instrument on the National Aeronautics and Space Administration (NASA) Lunar Reconnaissance Orbiter (LRO) spacecraft (Tooley and others, 2010). The equatorial WAC images were orthorectified onto the Global Lunar Digital Terrain Mosaic (GLD100, WAC-derived 100 m/pixel digital elevation model; Scholten and others, 2012 ) while the polar images were orthorectified onto the lunar LOLA polar digital elevation models (Neumann and others, 2010). The Mercator projection is used between latitudes ±57°, with a central meridian at 0° longitude and latitude equal to the nominal scale at 0°. The Polar Stereographic projection is used for the regions north of the +55° parallel and south of the –55° parallel, with a central meridian set for both at 0° and a latitude of true scale at +90° and -90°, respectively. All named features greater than 85 km in diameter or length were included unless they were not visible on the map. Some selected well-known features less than 85 km in size were also included. For listed references, please open the full PDF. Sheet 2: This map is based on data from the Lunar Orbiter Laser Altimeter (LOLA; Smith and others, 2010), an instrument on the National Aeronautics and Space Administration (NASA) Lunar Reconnaissance Orbiter (LRO) spacecraft (Tooley and others, 2010). The image used for the base of this map represents more than 6.5 billion measurements gathered between July 2009 and July 2013, adjusted for consistency in the coordinate system described below, and then converted to lunar radii (Mazarico and others, 2012). For the Mercator portion, these measurements were converted into a digital elevation model (DEM) with a resolution of 0.015625 degrees per pixel, or 64 pixels per degree. In projection, the pixels are 473.8 m in size at the equator. For the polar portion, the LOLA elevation points were used to create a DEM at 240 meters per pixel. A shaded relief map was generated from each DEM with a sun angle of 45° from horizontal, and a sun azimuth of 270°, as measured clockwise from north with no vertical exaggeration. The DEM values were then mapped to a global color look-up table, with each color representing a range of 1 km of elevation. For this map sheet, only larger feature names are shown. For references listed above, please open the full PDF.

Scientific Investigations Map↗

USGS2014

Mars Global Digital Dune Database (MGD 3 ): Global dune distribution and wind pattern observations

The Mars Global Digital Dune Database (MGD 3 ) is complete and now extends from 90°N to 90°S latitude. The recently released south pole (SP) portion (MC-30) of MGD 3 adds ∼60,000 km 2 of medium to large-size dark dune fields and ∼15,000 km 2 of sand deposits and smaller dune fields to the previously released equatorial (EQ, ∼70,000 km 2 ), and north pole (NP, ∼845,000 km 2 ) portions of the database, bringing the global total to ∼975,000 km2. Nearly all NP dunes are part of large sand seas, while the majority of EQ and SP dune fields are individual dune fields located in craters. Despite the differences between Mars and Earth, their dune and dune field morphologies are strikingly similar. Bullseye dune fields, named for their concentric ring pattern, are the exception, possibly owing their distinctive appearance to winds that are unique to the crater environment. Ground-based wind directions are derived from slipface (SF) orientation and dune centroid azimuth (DCA), a measure of the relative location of a dune field inside a crater. SF and DCA often preserve evidence of different wind directions, suggesting the importance of local, topographically influenced winds. In general however, ground-based wind directions are broadly consistent with expected global patterns, such as polar easterlies. Intriguingly, between 40°S and 80°S latitude both SF and DCA preserve their strongest, though different, dominant wind direction, with transport toward the west and east for SF-derived winds and toward the north and west for DCA-derived winds.

Icarus↗

USGS2013

Summary of the Third International Planetary Dunes Workshop: remote sensing and image analysis of planetary dunes

The Third International Planetary Dunes Workshop took place in Flagstaff, AZ, USA during June 12–15, 2012. This meeting brought together a diverse group of researchers to discuss recent advances in terrestrial and planetary research on aeolian bedforms. The workshop included two and a half days of oral and poster presentations, as well as one formal (and one informal) full-day field trip. Similar to its predecessors, the presented work provided new insight on the morphology, dynamics, composition, and origin of aeolian bedforms on Venus, Earth, Mars, and Titan, with some intriguing speculation about potential aeolian processes on Triton (a satellite of Neptune) and Pluto. Major advancements since the previous International Planetary Dunes Workshop include the introduction of several new data analysis and numerical tools and utilization of low-cost field instruments (most notably the time-lapse camera). Most presentations represented advancement towards research priorities identified in both of the prior two workshops, although some previously recommended research approaches were not discussed. In addition, this workshop provided a forum for participants to discuss the uncertain future of the Planetary Aeolian Laboratory; subsequent actions taken as a result of the decisions made during the workshop may lead to an expansion of funding opportunities to use the facilities, as well as other improvements. The interactions during this workshop contributed to the success of the Third International Planetary Dunes Workshop, further developing our understanding of aeolian processes on the aeolian worlds of the Solar System.

Aeolian Research↗

USGS2011

History of plains resurfacing in the Scandia region of Mars

We present a preliminary photogeologic map of the Scandia region of Mars with the objective of reconstructing its resurfacing history. The Scandia region includes the lower section of the regional lowland slope of Vastitas Borealis extending about 500–1800 km away from Alba Mons into the Scandia sub-basin below −4800 m elevation. Twenty mapped geologic units express the diverse stratigraphy of the region. We particularly focus on the materials making up the Vastitas Borealis plains and its Scandia sub-region, where erosional processes have obscured stratigraphic relations and made the reconstruction of the resurfacing history particularly challenging. Geologic mapping implicates the deposition, erosion, and deformation/degradation of geologic units predominantly during Late Hesperian and Early Amazonian time (~3.6–3.3 Ga). During this time, Alba Mons was active, outflow channels were debouching sediments into the northern plains, and basal ice layers of the north polar plateau were accumulating. We identify zones of regional tectonic contraction and extension as well as gradation and mantling. Depressions and scarps within these zones indicate collapse and gradation of Scandia outcrops and surfaces at scales of meters to hundreds of meters. We find that Scandia Tholi display concentric ridges, rugged peaks, irregular depressions, and moats that suggest uplift and tilting of layered plains material by diapirs and extrusion, erosion, and deflation of viscous, sedimentary slurries as previously suggested. These appear to be long-lived features that both pre-date and post-date impact craters. Mesa-forming features may have similar origins and occur along the southern margin of the Scandia region, including near the Phoenix Mars Lander site. Distinctive lobate materials associated with local impact craters suggest impact-induced mobilization of surface materials. We suggest that the formation of the Scandia region features potentially resulted from crustal heating related to Alba Mons volcanism, which acted upon a sequence of lavas, outflow channel sediments, and polar ice deposits centered within the Scandia region. These volatile-enriched sediments may have been in a state of partial volatile melt, resulting in the mobilization of deeply buried ancient materials and their ascent and emergence as sediment and mud breccia diapirs to form tholi features. Similar subsurface instabilities proximal to Alba Mons may have led to surface disruption, as suggested by local and regional scarps, mesas, moats, and knob fields.

Planetary and Space Science↗

USGS2007

Mars global digital dune database and initial science results

A new Mars Global Digital Dune Database (MGD 3 ) constructed using Thermal Emission Imaging System (THEMIS) infrared (IR) images provides a comprehensive and quantitative view of the geographic distribution of moderate‐ to large‐size dune fields (area >1 km 2 ) that will help researchers to understand global climatic and sedimentary processes that have shaped the surface of Mars. MGD 3 extends from 65°N to 65°S latitude and includes ∼550 dune fields, covering ∼70,000 km 2 , with an estimated total volume of ∼3,600 km 3 . This area, when combined with polar dune estimates, suggests moderate‐ to large‐size dune field coverage on Mars may total ∼800,000 km 2 , ∼6 times less than the total areal estimate of ∼5,000,000 km 2 for terrestrial dunes. Where availability and quality of THEMIS visible (VIS) or Mars Orbiter Camera narrow‐angle (MOC NA) images allow, we classify dunes and include dune slipface measurements, which are derived from gross dune morphology and represent the prevailing wind direction at the last time of significant dune modification. For dunes located within craters, the azimuth from crater centroid to dune field centroid (referred to as dune centroid azimuth) is calculated and can provide an accurate method for tracking dune migration within smooth‐floored craters. These indicators of wind direction are compared to output from a general circulation model (GCM). Dune centroid azimuth values generally correlate to regional wind patterns. Slipface orientations are less well correlated, suggesting that local topographic effects may play a larger role in dune orientation than regional winds.

Journal of Geophysical Research E: Planets↗

USGS2007

Mars Global Digital Dune Database: MC2-MC29

Introduction The Mars Global Digital Dune Database presents data and describes the methodology used in creating the database. The database provides a comprehensive and quantitative view of the geographic distribution of moderate- to large-size dune fields from 65? N to 65? S latitude and encompasses ~ 550 dune fields. The database will be expanded to cover the entire planet in later versions. Although we have attempted to include all dune fields between 65? N and 65? S, some have likely been excluded for two reasons: 1) incomplete THEMIS IR (daytime) coverage may have caused us to exclude some moderate- to large-size dune fields or 2) resolution of THEMIS IR coverage (100m/pixel) certainly caused us to exclude smaller dune fields. The smallest dune fields in the database are ~ 1 km2 in area. While the moderate to large dune fields are likely to constitute the largest compilation of sediment on the planet, smaller stores of sediment of dunes are likely to be found elsewhere via higher resolution data. Thus, it should be noted that our database excludes all small dune fields and some moderate to large dune fields as well. Therefore the absence of mapped dune fields does not mean that such dune fields do not exist and is not intended to imply a lack of saltating sand in other areas. Where availability and quality of THEMIS visible (VIS) or Mars Orbiter Camera narrow angle (MOC NA) images allowed, we classifed dunes and included dune slipface measurements, which were derived from gross dune morphology and represent the prevailing wind direction at the last time of significant dune modification. For dunes located within craters, the azimuth from crater centroid to dune field centroid was calculated. Output from a general circulation model (GCM) is also included. In addition to polygons locating dune fields, the database includes over 1800 selected Thermal Emission Imaging System (THEMIS) infrared (IR), THEMIS visible (VIS) and Mars Orbiter Camera Narrow Angle (MOC NA) images that were used to build the database. The database is presented in a variety of formats. It is presented as a series of ArcReader projects which can be opened using the free ArcReader software. The latest version of ArcReader can be downloaded at http://www.esri.com/software/arcgis/arcreader/download.html. The database is also presented in ArcMap projects. The ArcMap projects allow fuller use of the data, but require ESRI ArcMap? software. Multiple projects were required to accommodate the large number of images needed. A fuller description of the projects can be found in the Dunes_ReadMe file and the ReadMe_GIS file in the Documentation folder. For users who prefer to create their own projects, the data is available in ESRI shapefile and geodatabase formats, as well as the open Geographic Markup Language (GML) format. A printable map of the dunes and craters in the database is available as a Portable Document Format (PDF) document. The map is also included as a JPEG file. ReadMe files are available in PDF and ASCII (.txt) files. Tables are available in both Excel (.xls) and ASCII formats.

Open-File Report↗