Geology topics

Ronald W. Stanton

Publications and source records attributed to Ronald W. Stanton.

4 recordsLinked to original sources

USGS2010

Megascopic lithologic studies of coals in the Powder River basin in Wyoming and in adjacent basins in Wyoming and North Dakota

Between 1999 and 2007, the U.S. Geological Survey (USGS) investigated coalbed methane (CBM) resources in the Wyoming portion of the Powder River Basin. The study also included the CBM resources in the North Dakota portion of the Williston Basin of North Dakota and the Wyoming portion of the Green River Basin of Wyoming. This project involved the cooperation of the State Office, Reservoir Management Group (RMG) of the Bureau of Land Management (BLM) in Casper, Wyo., and 16 independent gas operators in the Powder River, Williston, and Green River Basins. The USGS and BLM entered into agreements with these CBM operators to supply samples for the USGS to analyze and provide the RMG with rapid, timely results of total gas desorbed, coal quality, and high-pressure methane adsorption isotherm data. This program resulted in the collection of 963 cored coal samples from 37 core holes. This report presents megascopic lithologic descriptive data collected from canister samples extracted from the 37 wells cored for this project.

Open-File Report↗

USGS2005

Tar yields from low-temperature carbonization of coal facies from the Powder River Basin, Wyoming, USA

Tar yields from low-temperature carbonization correlate with the amount of crypto-eugelinite in samples selected to represent petrographically distinct coal facies of the Wyodak-Anderson coal zone. Tar yields from Fischer Assay range from <1 to 11 wt.% on a dry basis and correspond ( r = 0.72) to crypto-eugelinite contents of the coal that range from 15 to 60 vol.%. Core and highwall samples were obtained from active surface mines in the Gillette field, Powder River Basin, Wyoming. Because the rank of the samples is essentially the same, differences in low-temperature carbonization yields are interpreted from compositional differences, particularly the crypto-eugelinite content. In the Wyodak-Anderson coal zone, crypto-eugelinite probably was derived from degraded humic matter which absorbed decomposition products from algae, fungi, bacteria, and liptinitic plant parts (materials possibly high in hydrogen). Previous modeling of the distribution of crypto-eugelinite in the discontinuous Wyodak-Anderson coal zone indicated that tar yields should be greater from coal composing the upper part and interior areas than from coal composing the lower parts and margins of the individual coal bodies. It is possible that hydrocarbon yields from natural coalification processes would be similar to yields obtained from laboratory pyrolysis. If so, the amount of crypto-eugelinite may also be an important characteristic when evaluating coal as source rock for migrated hydrocarbons.

Wyoming↗

USGS1988

Petrographic characteristics of the Wyodak-Anderson coal bed (Paleocene), Powder River Basin, Wyoming, U.S.A.

Six lithofacies of the thick ( > 30 m) Wyodak-Anderson subbituminous coal bed of the Fort Union Formation (Paleocene), Powder River Basin, Wyoming, can be delimited using megascopic and petrographic data. Previous lithofacies analysis of the rock types associated with the Wyodak-Anderson bed suggested that raised peat accumulated in restricted parts of an inland flood plain. The peat bodies were separated by deposits of contemporaneous, possibly anastomosed channels. In this study, megascopic descriptions from four mine highwalls of the Wyodak-Anderson coal bed were found to be similar to facies defined by microscopic data from core and highwall samples. The data indicate that the upper and lower parts of the coal bed are rich in preserved wood remains (for instance, humotelinite), whereas the middle part of the bed contains comparatively larger amounts of material that resulted from degradation and comminution of the peat (e.g. eugelinite). The facies are interpreted to be the result of different chemical and biological environments at the time of peat formation.

Wyoming↗

USGS1984

ORIGIN OF QUARTZ IN COAL.

Both a scanning electron microscope and an electron microprobe (EMP) were used in this study to analyze the cathodoluminescence properties of quartz grains in samples of the Upper Freeport coal bed because quartz grains in coal are small (silt sized) and below the resolution capabilities of a standard luminoscope. Quartz grains were identified by the detection of silicon alone with energy dispersive X-ray units attached to both the SEM and the EMP.

Conference Paper↗