Geology Reports⌕ Search

Geology topics

Roger P. Ashley

Publications and source records attributed to Roger P. Ashley.

At least 19 recordsLinked to original sources
USGS2014

Mapping advanced argillic alteration at Cuprite, Nevada, using imaging spectroscopy

Mineral maps based on Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were used to study late Miocene advanced argillic alteration at Cuprite, Nevada. Distributions of Fe-bearing minerals, clays, micas, sulfates, and carbonates were mapped using the Tetracorder spectral-shape matching system. The Al content of white micas increases toward altered areas and near intrusive rocks. Alunite composition varies from pure K to intimate mixtures of Na-K endmembers with subpixel occurrences of huangite, the Ca analogue of alunite. Intimately mixed Na-K alunite marks areas of relatively lower alteration temperature, whereas co-occurring Na-alunite and dickite may delineate relict hydrothermal conduits. The presence of dickite, halloysite, and well-ordered kaolinite, but absence of disordered kaolinite, is consistent with acidic conditions during hydrothermal alteration. Partial lichen cover on opal spectrally mimics chalcedony, limiting its detection to lichen-free areas. Pods of buddingtonite are remnants of initial quartz-adularia-smectite alteration. Thus, spectral maps provide a synoptic view of the surface mineralogy, and define a previously unrecognized early steam-heated hydrothermal event. Faulting and episodes of hydrothermal alteration at Cuprite were intimately linked to upper plate movements above the Silver Peak-Lone Mountain detachment and growth, collapse, and resurgence of the nearby Stonewall Mountain volcanic complex between 8 and 5 Ma. Isotopic dating indicates that hydrothermal activity started at least by 7.61 Ma and ended by about 6.2 Ma. Spectral and stable isotope data suggest that Cuprite is a late Miocene low-sulfidation adularia-sericite type hot spring deposit overprinted by late-stage, steam-heated advanced argillic alteration formed along the margin of the Stonewall Mountain caldera.

Nevada↗
USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗
USGS2010

Geochemical evolution of a high arsenic, alkaline pit-lake in the Mother Lode Gold District, California

The Harvard orebody at the Jamestown gold mine, located along the Melones fault zone in the southern Mother Lode gold district, California, was mined in an open-pit operation from 1987 to 1994. Dewatering during mining produced a hydrologic cone of depression; recovery toward the premining ground-water configuration produced a monomictic pit lake with alkaline Ca-Mg-HCO 3 -SO 4 –type pit water, concentrations of As up to 1,200 μ g/L, and total dissolved solids (TDS) up to 2,000 mg/L. In this study, pit-wall rocks were mapped and chemically analyzed to provide a context for evaluating observed variability in the composition of the pit-lake waters in relationship to seasonal weather patterns. An integrated hydrogeochemical model of pit-lake evolution based on observations of pit-lake volume, water composition (samples collected between 1998–2000, 2004), and processes occurring on pit walls was developed in three stages using the computer code PHREEQC. Stage 1 takes account of seasonally variable water fluxes from precipitation, evaporation, springs, and ground water, as well as lake stratification and mixing processes. Stage 2 adds CO 2 fluxes and wall-rock interactions, and stage 3 assesses the predictive capability of the model. Two major geologic units in fault contact comprise the pit walls. The hanging wall is composed of interlayered slate, metavolcanic and metavolcaniclastic rocks, and schists; the footwall rocks are chlorite-actinolite and talc-tremolite schists generated by metasomatism of greenschist-facies mafic and ultramafic igneous rocks. Alteration in the ore zone provides evidence for mineralizing fluids that introduced CO 2 , S, and K 2 O, and redistributed SiO 2 . Arsenian pyrite associated with the alteration weathers to produce goethite and jarosite on pit walls and in joints, as well as copiapite and hexahydrite efflorescences that accumulate on wall-rock faces during dry California summers. All of these pyrite weathering products incorporate arsenic at concentrations from <100 up to 1,200 ppm. In the pit lake, pH and TDS reach seasonal highs in the summer epilimnion; pH is lowest in the summer hypolimnion. Arsenic and bicarbonate covary in the hypolimnion, rising as stratification proceeds and declining during winter rains. The computational model suggests that water fluxes alone do not account for this seasonal variability. Loss of CO 2 to the atmosphere, interaction with pit walls including washoff of efflorescent salts during the first flush and seasonal rainfall, and arsenic sorption appear to contribute to the observed pit-lake characteristics.

California↗
USGS2008

Mercury geochemistry of gold placer tailings, sediments, bedrock, and waters in the lower Clear Creek area, Shasta County, California— Report of investigations, 2001-2003

Clear Creek, one of the major tributaries of the upper Sacramento River, drains the eastern Trinity Mountains. Alluvial plain and terrace gravels of lower Clear Creek, at the northwest edge of the Sacramento Valley, contain placer gold that has been mined since the Gold Rush by various methods including hydraulic mining and dredging. In addition, from the 1950s to the 1980s aggregate-mining operations removed gravel from the lower Clear Creek flood plain. Since Clear Creek is an important stream for salmon production, a habitat restoration program is underway to repair damage from mining and improve conditions for spawning. This program includes moving dredge tailings to increase the area of spawning gravel and to fill gravel pits in the flood plain, raising the concern that mercury lost to these tailings in the gold recovery process may be released and become available to biota. The purposes of our study are to identify sources, transport, and dispersal of mercury in the lower Clear Creek area and identify environments in which bioavailable methylmercury is produced. Analytical data acquired include total mercury and methylmercury concentrations in sediments, tailings, and water. Mercury concentrations in bedrock and unmined gravels in and around the mined area are low and are taken to represent background concentrations. Bulk mercury values in placer mining tailings range from near-background in coarse dry materials to more than 40 times background in sands and silts exposed to mercury in sluices. Tailings are entrained in flood-plain sediments and active stream sediments; consequently, mercury concentrations in these materials range from background to about two to three times background. Mercury in sediments and tailings is associated with fine size fractions. The source of most of this mercury is historical gold mining in the Clear Creek watershed. Although methylmercury levels are low in most of these tailings and sediments, flood-plain sediment in shallow flood-plain ponds, tailings in a dredge pond, and active stream sediment in a Clear Creek backwater have elevated levels of methylmercury. Stream waters in the area show low mercury levels during both summer and winter base-flow conditions. During winter high flows total mercury increases by about one order of magnitude; this additional mercury is associated with suspended particulate material. Methylmercury is low in stream waters. Ponds in various environments generally have higher total mercury levels in waters than Clear Creek under base-flow conditions and higher methylmercury levels in both sediments and waters. Ponds are probably the main source of bioavailable mercury in the lower Clear Creek area. Several saline springs occur in the area. The saline waters are enriched in lithium, boron, and mercury, similar to connate waters that are expelled along thrust faults to the south on the west side of the Sacramento Valley. Saline springs may locally contribute some mercury to pond and drainage waters.

California↗
USGS2003

Field guide to hydrothermal alteration in the White River altered area and in the Osceola Mudflow, Washington

The Cenozoic Cascades arcs of southwestern Washington are the product of long-lived, but discontinuous, magmatism beginning in the Eocene and continuing to the present (for example, Christiansen and Yeats, 1992). This magmatism is the result of subduction of oceanic crust beneath the North American continent. The magmatic rocks are divided into two subparallel, north-trending continental-margin arcs, the Eocene to Pliocene Western Cascades, and the Quaternary High Cascades, which overlies, and is east of, the Western Cascades. Both arcs are calc-alkaline and are characterized by voluminous mafic lava flows (mostly basalt to basaltic andesite compositions) and scattered large stratovolcanoes of mafic andesite to dacite compositions. Silicic volcanism is relatively uncommon. Quartz diorite to granite plutons are exposed in more deeply eroded parts of the Western Cascades Arc (for example, Mount Rainier area and just north of Mt. St. Helens). Hydrothermal alteration is widespread in both Tertiary and Quaternary igneous rocks of the Cascades arcs. Most alteration in the Tertiary Western Cascades Arc resulted from hydrothermal systems associated with small plutons, some of which formed porphyry copper and related deposits, including copper-rich breccia pipes, polymetallic veins, and epithermal gold-silver deposits. Hydrothermal alteration also is present on many Quaternary stratovolcanoes of the High Cascades Arc. On some High Cascades volcanoes, this alteration resulted in severely weakened volcanic edifices that were susceptible to failure and catastrophic landslides. Most notable is the sector collapse of the northeast side of Mount Rainier that occurred about 5,600 yr. B.P. This collapse resulted in formation of the clay-rich Osceola Mudflow that traveled 120 km down valley from Mount Rainier to Puget Sound covering more than 200 km2. This field trip examines several styles and features of hydrothermal alteration related to Cenozoic magmatism in the Cascades arcs. The morning of the trip will examine the White River altered area, which includes high-level alteration related to a large, early Miocene magmatic-hydrothermal system exposed about 10 km east of Enumclaw, Washington. Here, vuggy silica alteration is being quarried for silica and advanced argillic alteration has been prospected for alunite. Clay-filled fractures and sulfide-rich, fine-grained sedimentary rocks of hydrothermal origin locally are enriched in precious metals. Many hydrothermal features common in high-sulfidation gold-silver deposits and in advanced argillic alteration zones overlying porphyry copper deposits (for example, Gustafson and Hunt, 1975; Hedenquist and others, 2000; Sillitoe, 2000) are exposed, although no economic base or precious metal mineralized rock has been discovered to date. The afternoon will be spent examining two exposures of the Osceola Mudflow along the White River. The Osceola Mudflow contains abundant clasts of altered Quaternary rocks from Mount Rainier that show various types of hydrothermal alteration and hydrothermal features. The mudflow matrix contains abundant hydrothermal clay minerals that added cohesiveness to the debris flow and helped allow it to travel much farther down valley than other, noncohesive debris flows from Mount Rainier (Crandell, 1971; Vallance and Scott, 1997). The White River altered area is the subject of ongoing studies by geoscientists from Weyerhaeuser Company and the U.S. Geological Survey (USGS). The generalized descriptions of the geology, geophysics, alteration, and mineralization presented here represent the preliminary results of this study (Ashley and others, 2003). Additional field, geochemical, geochronologic, and geophysical studies are underway. The Osceola Mudflow and other Holocene debris flows from Mount Rainier also are the subject of ongoing studies by the USGS (for example, Breit and others, 2003; John and others, 2003; Plumlee and others, 2003, Sisson and others, 2003; Vallance and others, 2003). Studies of hydrothermal alteration in the Osceola Mudflow are being used to better understand fossil hydrothermal systems on Mount Rainier and potential hazards associated with this alteration.

Washington↗
USGS1998

Gold

Through the ages, men and women have cherished gold, and many have had a compelling desire to amass great quantities of it -- so compelling a desire, in fact, that the frantic need to seek and hoard gold has been aptly named "gold fever." Gold was among the first metals to be mined because it commonly occurs in its native form -- that is, not combined with other elements -- because it is beautiful and imperishable, and because exquisite objects can be made from it.

General Interest Publication↗
USGS1983

Airborne biogeophysical mapping of hidden mineral deposits

Airborne survey techniques have been developed to detect and map forest canopies affected by metal-induced stress. A high spectral resolution airborne spectroradiometer system, used over a known forest-covered copper soil anomaly, has revealed previously unknown spectral changes in the near-infrared chlorophyll absorption spectrum. The metal-induced spectral shifts have subsequently been reproduced in the laboratory at Columbia University. Waveform analysis techniques specifically designed for computer analysis of the high spectral resolution aircraft data filter out the very strong background noise introduced by variations in normal, unstressed vegetation canopy and by topographic effects. The wave-form method proves most effective in extracting the subtle spectral indicators of metal-induced stress. The analytic method is a unique frequency domain technique made possible by the high spectral resolution of the 500-channel spectroradiometer system. The biogeophysical technique is demonstrated by three mapping surveys of Cotter Basin, Montana, and Spirit Lake, Washington. This airborne mapping technique presents new application opportunities in large areas of the world where heavy forest cover has in the past made geologic and geophysical exploration tedious and expensive. The tree cover with widespreading and deeply penetrating root systems is turned to an advantage in the airborne biogeophysical technique by detecting metal-induced changes in the chlorophyll reflectance spectrum.

Montana↗