Geology Reports⌕ Search

Geology topics

Robert A. Williams

Publications and source records attributed to Robert A. Williams.

31 records · Page 2Linked to original sources
USGS2009

St. Louis Area Earthquake Hazards Mapping Project - A PowerPoint presentation

This Open-File Report contains illustrative materials, in the form of PowerPoint slides, used for an oral presentation given at the Earthquake Insight St. Louis, Mo., field trip held on May 28, 2009. The presentation focused on summarizing the St. Louis Area Earthquake Hazards Mapping Project (SLAEHMP) justification, goals, achievements, and products, for an audience of business and public officials. The individual PowerPoint slides highlight, in an abbreviated format, the topics addressed; they are discussed below and are explained with additional text as appropriate.

Illinois, Missouri↗
USGS2007

St. Louis Area Earthquake Hazards Mapping Project

St. Louis has experienced minor earthquake damage at least 12 times in the past 200 years. Because of this history and its proximity to known active earthquake zones, the St. Louis Area Earthquake Hazards Mapping Project will produce digital maps that show variability of earthquake hazards in the St. Louis area. The maps will be available free via the internet. They can be customized by the user to show specific areas of interest, such as neighborhoods or transportation routes.

Fact Sheet↗
USGS2007

Near-Surface Shear Wave Velocity Versus Depth Profiles, VS30, and NEHRP Classifications for 27 Sites in Puerto Rico

In 2004 and 2005 the Puerto Rico Seismic Network (PRSN), Puerto Rico Strong Motion Program (PRSMP) and the Geology Department at the University of Puerto Rico-Mayaguez (UPRM) collaborated with the U.S. Geological Survey to study near-surface shear-wave (Vs) and compressional-wave (Vp) velocities in and around major urban areas of Puerto Rico. Using noninvasive seismic refraction-reflection profiling techniques, we acquired velocities at 27 locations. Surveyed sites were predominantly selected on the premise that they were generally representative of near-surface materials associated with the primary geologic units located within the urbanized areas of Puerto Rico. Geologic units surveyed included Cretaceous intrusive and volcaniclastic bedrock, Tertiary sedimentary and volcanic units, and Quaternary unconsolidated eolian, fluvial, beach, and lagoon deposits. From the data we developed Vs and Vp depth versus velocity columns, calculated average Vs to 30-m depth (VS30), and derived NEHRP (National Earthquake Hazards Reduction Program) site classifications for all sites except one where results did not reach 30-m depth. The distribution of estimated NEHRP classes is as follows: three class 'E' (VS30 below 180 m/s), nine class 'D' (VS30 between 180 and 360 m/s), ten class 'C' (VS30 between 360 and 760 m/s), and four class 'B' (VS30 greater than 760 m/s). Results are being used to calibrate site response at seismograph stations and in the development of regional and local shakemap models for Puerto Rico.

Open-File Report↗
USGS2007

Seismic Hazard Maps for Seattle, Washington, Incorporating 3D Sedimentary Basin Effects, Nonlinear Site Response, and Rupture Directivity

This report presents probabilistic seismic hazard maps for Seattle, Washington, based on over 500 3D simulations of ground motions from scenario earthquakes. These maps include 3D sedimentary basin effects and rupture directivity. Nonlinear site response for soft-soil sites of fill and alluvium was also applied in the maps. The report describes the methodology for incorporating source and site dependent amplification factors into a probabilistic seismic hazard calculation. 3D simulations were conducted for the various earthquake sources that can affect Seattle: Seattle fault zone, Cascadia subduction zone, South Whidbey Island fault, and background shallow and deep earthquakes. The maps presented in this document used essentially the same set of faults and distributed-earthquake sources as in the 2002 national seismic hazard maps. The 3D velocity model utilized in the simulations was validated by modeling the amplitudes and waveforms of observed seismograms from five earthquakes in the region, including the 2001 M6.8 Nisqually earthquake. The probabilistic seismic hazard maps presented here depict 1 Hz response spectral accelerations with 10%, 5%, and 2% probabilities of exceedance in 50 years. The maps are based on determinations of seismic hazard for 7236 sites with a spacing of 280 m. The maps show that the most hazardous locations for this frequency band (around 1 Hz) are soft-soil sites (fill and alluvium) within the Seattle basin and along the inferred trace of the frontal fault of the Seattle fault zone. The next highest hazard is typically found for soft-soil sites in the Duwamish Valley south of the Seattle basin. In general, stiff-soil sites in the Seattle basin exhibit higher hazard than stiff-soil sites outside the basin. Sites with shallow bedrock outside the Seattle basin have the lowest estimated hazard for this frequency band.

Open-File Report↗
USGS2002

Reconnaissance shallow seismic investigation of depth-to-bedrock and possible methane-bearing coalbeds, Galena, Alaska

A reconnaissance shallow seismic reflection/refraction investigation in and around the city of Galena, Alaska suggests that Tertiary and/or Cretaceous bedrock, and possible coalbeds within the Cretaceous, is at least as deep as 550 feet in the immediate vicinity of town. Rock could be deeper than 1000 feet under alternate interpretations. Reflections recorded in these data are believed to be from the sediment/bedrock interface. Analysis of these reflections and associated refractions indicates that this interface, interpreted at most of the six profile locations, has a high seismic velocity, possibly indicating non-sedimentary rock (e.g. volcanic or igneous).

Open-File Report↗
USGS2001

A test of a mechanical multi-impact shear-wave seismic source

We modified two gasoline-engine-powered earth tampers, commonly used as compressional-(P) wave seismic energy sources for shallow reflection studies, for use as shear(S)-wave energy sources. This new configuration, termed ?Hacker? (horizontal Wacker?), is evaluated as an alternative to the manual sledgehammer typically used in conjunction with a large timber held down by the front wheels of a vehicle. The Hacker maximizes the use of existing equipment by a quick changeover of bolt-on accessories as opposed to the handling of a separate source, and is intended to improve the depth of penetration of S-wave data by stacking hundreds of impacts over a two to three minute period. Records were made with a variety of configurations involving up to two Hackers simultaneously then compared to a reference record made with a sledgehammer. Preliminary results indicate moderate success by the higher amplitude S-waves recorded with the Hacker as compared to the hammer method. False triggers generated by the backswing of the Hacker add unwanted noise and we are currently working to modify the device to eliminate this effect. Correlation noise caused by insufficient randomness of the Hacker impact sequence is also a significant noise problem that we hope to reduce by improving the coupling of the Hacker to the timber so that the operator has more control over the impact sequence.

Open-File Report↗
USGS2000

High-resolution seismic reflection surveys and modeling across an area of high damage from the 1994 Northridge earthquake, Sherman Oaks, California

Approximately 3.6 km of P-wave seismic-reflection data were acquired along two orthogonal profiles in Sherman Oaks, California to determine whether shallow (less than 1-km depth) geologic structures contributed to the dramatic localized damage resulting from the 1994 Northridge earthquake. Both lines, one along Matilija Avenue and one along Milbank Street, crossed areas of both high and low damage. We believe these data reveal a geologic structure in the upper 600 m that contributed to the increased earthquake ground shaking in the high-damage areas south of and along the Los Angeles River. Of interest in these data is a reflection interpreted to be from bedrock that can be traced to the north along the Matilija Avenue profile. This reflecting interface, dipping northward at 15°–22°, may be an important impedance boundary because it is the lower boundary of a wedge of overlying low-velocity sediments. The wedge thins and terminates in the area where we interpret down-warped reflections as evidence of a shallow subbasin. The low-velocity subbasin sediments (V s of 200 m/sec V p of 500 m/sec) may be up to 150 m thick beneath the channelized Los Angeles River. The area across the subbasin experienced greater earthquake damage from possible geometric focusing effects. Three-dimensional basin effects may be responsible for the variable damage pattern, but from these seismic profiles it is not possible to determine the regional structural trends. Two-dimensional elastic and SH-mode finite-difference modeling of the imaged structural geometry along Matilija Avenue suggests that a peak horizontal-velocity amplification factor of two-and-over can be explained in the high-damage area above the shallow subbasin and sediment wedge. Amplification factors up to 5 were previously observed in aftershock data, at frequencies of 2 to 6 Hz. Amplification in the elastic simulation at the Santa Monica Mountains range-front on the southern end of the Matilija profile, with the geologic layering and geometry interpreted from the seismic data, is also consistent with aftershock observations.

Bulletin of the Seismological Society of America↗