Geology topics

Richard W. Briggs

Publications and source records attributed to Richard W. Briggs.

At least 73 records · Page 4Linked to original sources

USGS2017

Gravitational body forces focus North American intraplate earthquakes

Earthquakes far from tectonic plate boundaries generally exploit ancient faults, but not all intraplate faults are equally active. The North American Great Plains exemplify such intraplate earthquake localization, with both natural and induced seismicity generally clustered in discrete zones. Here we use seismic velocity, gravity and topography to generate a 3D lithospheric density model of the region; subsequent finite-element modelling shows that seismicity focuses in regions of high-gravity-derived deviatoric stress. Furthermore, predicted principal stress directions generally align with those observed independently in earthquake moment tensors and borehole breakouts. Body forces therefore appear to control the state of stress and thus the location and style of intraplate earthquakes in the central United States with no influence from mantle convection or crustal weakness necessary. These results show that mapping where gravitational body forces encourage seismicity is crucial to understanding and appraising intraplate seismic hazard.

Nature Communications↗

USGS2017

Tectonic summaries of magnitude 7 and greater earthquakes from 2000 to 2015

This paper describes the tectonic summaries for all magnitude 7 and larger earthquakes in the period 2000–2015, as produced by the U.S. Geological Survey National Earthquake Information Center during their routine response operations to global earthquakes. The goal of such summaries is to provide important event-specific information to the public rapidly and concisely, such that recent earthquakes can be understood within a global and regional seismotectonic framework. We compile these summaries here to provide a long-term archive for this information, and so that the variability in tectonic setting and earthquake history from region to region, and sometimes within a given region, can be more clearly understood.

Open-File Report↗

USGS2017

Refining fault slip rates using multiple displaced terrace risers-An example from the Honey Lake fault, NE California, USA

Faulted terrace risers are semi-planar features commonly used to constrain Quaternary slip rates along strike-slip faults . These landforms are difficult to date directly and therefore their ages are commonly bracketed by age estimates of the adjacent upper and lower terrace surfaces. However, substantial differences in the ages of the upper and lower terrace surfaces (a factor of 2.4 difference observed globally) produce large uncertainties in the slip-rate estimate. In this investigation, we explore how the full range of displacements and bounding ages from multiple faulted terrace risers can be combined to yield a more accurate fault slip rate. We use 0.25-m cell size digital terrain models derived from airborne lidar data to analyze three sites where terrace risers are offset right-laterally by the Honey Lake fault in NE California, USA. We use ages for locally extensive subhorizontal surfaces to bracket the time of riser formation: an upper surface is the bed of abandoned Lake Lahontan having an age of 15.8 ± 0.6 ka and a lower surface is a fluvial terrace abandoned at 4.7 ± 0.1 ka. We estimate lateral offsets of the risers ranging between 6.6 and 28.3 m (median values), a greater than fourfold difference in values. The amount of offset corresponds to the riser's position relative to modern stream meanders: the smallest offset is in a meander cutbank position, whereas the larger offsets are in straight channel or meander point-bar positions. Taken in isolation, the individual terrace-riser offsets yield slip rates ranging from 0.3 to 7.1 mm/a. However, when the offset values are collectively assessed in a probabilistic framework, we find that a uniform (linear) slip rate of 1.6 mm/a (1.4–1.9 mm/a at 95% confidence) can satisfy the data, within their respective uncertainties. This investigation demonstrates that integrating observations of multiple offset elements (crest, midpoint, and base) from numerous faulted and dated terrace risers at closely spaced sites can refine slip-rate estimates on strike-slip faults.

California↗

USGS2017

Holocene surface-faulting earthquakes at the Spring Lake and North Creek Sites on the Wasatch Fault Zone: Evidence for complex rupture of the Nephi Segment

The Nephi segment of the Wasatch fault zone (WFZ) comprises two fault strands, the northern and southern strands, which have evidence of recurrent late Holocene surface-faulting earthquakes. We excavated paleoseismic trenches across these strands to refine and expand their Holocene earthquake chronologies; improve estimates of earthquake recurrence, displacement, and fault slip rate; and assess whether the strands rupture separately or synchronously in large earthquakes. Paleoseismic data from the Spring Lake site expand the Holocene record of earthquakes on the northern strand: at least five to seven earthquakes ruptured the Spring Lake site at 0.9 ± 0.2 ka (2σ), 2.9 ± 0.7 ka, 4.0 ± 0.5 ka, 4.8 ± 0.8 ka, 5.7 ± 0.8 ka, 6.6 ± 0.7 ka, and 13.1 ± 4.0 ka, yielding a Holocene mean recurrence of ~1.2–1.5 kyr and vertical slip rate of ~0.5–0.8 mm/yr. Paleoseismic data from the North Creek site help refine the Holocene earthquake chronology for the southern strand: at least five earthquakes ruptured the North Creek site at 0.2 ± 0.1 ka (2σ), 1.2 ± 0.1 ka, 2.6 ± 0.9 ka, 4.0 ± 0.1 ka, and 4.7 ± 0.7 ka, yielding a mean recurrence of 1.1–1.3 kyr and vertical slip rate of ~1.9–2.0 mm/yr. We compare these Spring Lake and North Creek data with previous paleoseismic data for the Nephi segment and report late Holocene mean recurrence intervals of ~1.0–1.2 kyr for the northern strand and ~1.1–1.3 kyr for the southern strand. The northern and southern strands have similar late Holocene earthquake histories, which allow for models of both independent and synchronous rupture. However, considering the earthquake timing probabilities and per-event vertical displacements, we have the greatest confidence in the simultaneous rupture of the strands, including rupture of one strand with spillover rupture to the other. Ultimately, our results improve the surface-faulting earthquake history of the Nephi segment and enhance our understanding of how structural barriers influence normal-fault rupture.

Utah↗

USGS2016

Coseismic slip and early afterslip of the 2015 Illapel, Chile, earthquake: Implications for frictional heterogeneity and coastal uplift

Great subduction earthquakes are thought to rupture portions of the megathrust, where interseismic coupling is high and velocity-weakening frictional behavior is dominant, releasing elastic deformation accrued over a seismic cycle. Conversely, postseismic afterslip is assumed to occur primarily in regions of velocity-strengthening frictional characteristics that may correlate with lower interseismic coupling. However, it remains unclear if fixed frictional properties of the subduction interface, coseismic or aftershock-induced stress redistribution, or other factors control the spatial distribution of afterslip. Here we use interferometric synthetic aperture radar and Global Position System observations to map the distribution of coseismic slip of the 2015 M w 8.3 Illapel, Chile, earthquake and afterslip within the first 38 days following the earthquake. We find that afterslip overlaps the coseismic slip area and propagates along-strike into regions of both high and moderate interseismic coupling. The significance of these observations, however, is tempered by the limited resolution of geodetic inversions for both slip and coupling. Additional afterslip imaged deeper on the fault surface bounds a discrete region of deep coseismic slip, and both contribute to net uplift of the Chilean Coastal Cordillera. A simple partitioning of the subduction interface into regions of fixed frictional properties cannot reconcile our geodetic observations. Instead, stress heterogeneities, either preexisting or induced by the earthquake, likely provide the primary control on the afterslip distribution for this subduction zone earthquake. We also explore the occurrence of coseismic and postseismic coastal uplift in this sequence and its implications for recent hypotheses concerning the source of permanent coastal uplift along subduction zones.

Journal of Geophysical Research B: Solid Earth↗

USGS2016

Unusually large tsunamis frequent a currently creeping part of the Aleutian megathrust

Current models used to assess earthquake and tsunami hazards are inadequate where creep dominates a subduction megathrust. Here we report geological evidence for large tsunamis, occurring on average every 300–340 years, near the source areas of the 1946 and 1957 Aleutian tsunamis. These areas bookend a postulated seismic gap over 200 km long where modern geodetic measurements indicate that the megathrust is currently creeping. At Sedanka Island, evidence for large tsunamis includes six sand sheets that blanket a lowland facing the Pacific Ocean, rise to 15 m above mean sea level, contain marine diatoms, cap terraces, adjoin evidence for scour, and date from the past 1700 years. The youngest sheet, and modern drift logs found as far as 800 m inland and >18 m elevation, likely record the 1957 tsunami. Modern creep on the megathrust coexists with previously unrecognized tsunami sources along this part of the Aleutian Subduction Zone.

Alaska↗

USGS2016

Terrestrial cosmogenic surface exposure dating of glacial and associated landforms in the Ruby Mountains-East Humboldt Range of central Nevada and along the northeastern flank of the Sierra Nevada

Deposits near Lamoille in the Ruby Mountains-East Humboldt Range of central Nevada and at Woodfords on the eastern edge of the Sierra Nevada each record two distinct glacial advances. We compare independent assessments of terrestrial cosmogenic nuclide (TCN) surface exposure ages for glacial deposits that we have determined to those obtained by others at the two sites. At each site, TCN ages of boulders on moraines of the younger advance are between 15 and 30 ka and may be associated with marine oxygen isotope stage (MIS) 2. At Woodfords, TCN ages of boulders on the moraine of the older advance are younger than ~ 60 ka and possibly formed during MIS 4, whereas boulders on the correlative outwash surface show ages approaching 140 ka (~ MIS 6). The TCN ages of boulders on older glacial moraine at Woodfords thus appear to severely underestimate the true age of the glacial advance responsible for the deposit. The same is possibly true at Lamoille where clasts sampled from the moraine of the oldest advance have ages ranging between 20 and 40 ka with a single outlier age of ~ 80 ka. The underestimations are attributed to the degradation and denudation of older moraine crests. Noting that boulder ages on the older advances at each site overlap significantly with MIS 2. We speculate that erosion of the older moraines has been episodic, with a pulse of denudation accompanying the inception of MIS 2 glaciation.

Nevada↗

USGS2016

Introduction to the special issue on the 25 April 2015 Mw 7.8 Gorkha(Nepal) earthquake

On April 25, 2015, a moment magnitude (M w ) 7.8 earthquake struck central Nepal, breaking a section of the broader Himalayan Front that had been largely quiescent in moderate-to-large earthquakes for much of the modern seismological era. Ground shaking associated with the event resulted in a broad distribution of triggered avalanches and landslides. The ensuing aftershock sequence was punctuated by a Mw 7.3 event 17 days after the mainshock. The combined effects of these earthquakes and secondary hazards have led to the Gorkha earthquake becoming the worst natural disaster in Nepal since the 1934 Nepal-Bihar earthquake, causing close to 9000 deaths and severely injuring over 21,000 people ( OCHA, 2015 ). Despite the devastating effects of this earthquake, the convergent margin that hosted it is thought to be capable of much larger ruptures—perhaps as large as Mw 9 ( Feldl and Bilham, 2006 ). The 2015 Gorkha rupture lies just to the west of the 1934 M 8.0–8.4 event ( Sapkota et al., 2013; Bollinger et al., 2014 ). Unlike the 1934 event, which has been documented in paleoseismic trenches along the Himalayan Front (e.g., Sapkota et al., 2013 ), and other large ruptures along the arc (e.g., Lavé et al., 2005; Kumar et al., 2006 ), the 2015 event did not rupture to the surface (e.g., Galetzka et al., 2015 ). As a result, some researchers have suggested that the Gorkha earthquake was not as large, or as damaging, as might have been expected based on our (albeit limited) understanding of historic earthquakes, seismic hazard and risk (e.g., Bilham, 2015; Hough, 2015 ). Important questions surrounding the earthquake and its regional setting thus arise. What were the detailed characteristics of the rupture and the aftershock sequence, and what is the relationship between mainshock slip and subsequent seismicity? Why did this event not rupture to the surface? Was damage less than should have been expected; and if so, why? What role did path effects, such as basin amplification, play? Do details of the earthquake sequence allow us to better understand regional seismotectonics, and in turn, future risk? Discussion of these and other issues has been ongoing since the earthquake; a large body of literature already exists that characterizes details of the earthquake sequence and its effects. This special issue attempts to gather a wide variety of detailed studies that wholly characterize this event to a degree that has not yet been possible. The studies herein provide an improved understanding of the Gorkha earthquake, its impact on the region, and its place in the broader seismotectonic history of the Himalayan Front.

Gorkha↗

USGS2015

A random-walk algorithm for modeling lithospheric density and the role of body forces in the evolution of the Midcontinent Rift

This paper develops a Monte Carlo algorithm for extracting three-dimensional lithospheric density models from geophysical data. Empirical scaling relationships between velocity and density create a 3D starting density model, which is then iteratively refined until it reproduces observed gravity and topography. This approach permits deviations from uniform crustal velocity-density scaling, which provide insight into crustal lithology and prevent spurious mapping of crustal anomalies into the mantle. We test this algorithm on the Proterozoic Midcontinent Rift (MCR), north-central U.S. The MCR provides a challenge because it hosts a gravity high overlying low shear-wave velocity crust in a generally flat region. Our initial density estimates are derived from a seismic velocity/crustal thickness model based on joint inversion of surface-wave dispersion and receiver functions. By adjusting these estimates to reproduce gravity and topography, we generate a lithospheric-scale model that reveals dense middle crust and eclogitized lowermost crust within the rift. Mantle lithospheric density beneath the MCR is not anomalous, consistent with geochemical evidence that lithospheric mantle was not the primary source of rift-related magmas and suggesting that extension occurred in response to far-field stress rather than a hot mantle plume. Similarly, the subsequent inversion of normal faults resulted from changing far-field stress that exploited not only warm, recently faulted crust but also a gravitational potential energy low in the MCR. The success of this density modeling algorithm in the face of such apparently contradictory geophysical properties suggests that it may be applicable to a variety of tectonic and geodynamic problems.

Iowa, Kansas, Michigan, Minnesota, Nebraska, Wisco↗

USGS2015

Rapid characterization of the 2015 M w 7.8 Gorkha, Nepal, earthquake sequence and its seismotectonic context

Earthquake response and related information products are important for placing recent seismic events into context and particularly for understanding the impact earthquakes can have on the regional community and its infrastructure. These tools are even more useful if they are available quickly, ahead of detailed information from the areas affected by such earthquakes. Here we provide an overview of the response activities and related information products generated and provided by the U.S. Geological Survey National Earthquake Information Center in association with the 2015 M 7.8 Gorkha, Nepal, earthquake. This group monitors global earthquakes 24  hrs/day and 7  days/week to provide rapid information on the location and size of recent events and to characterize the source properties, tectonic setting, and potential fatalities and economic losses associated with significant earthquakes. We present the timeline over which these products became available, discuss what they tell us about the seismotectonics of the Gorkha earthquake and its aftershocks, and examine how their information is used today, and might be used in the future, to help mitigate the impact of such natural disasters.

Seismological Research Letters↗

USGS2015

Reactivated faulting near Cushing, Oklahoma: Increased potential for a triggered earthquake in an area of United States strategic infrastructure

In October 2014 two moderate-sized earthquakes ( Mw 4.0 and 4.3) struck south of Cushing, Oklahoma, below the largest crude oil storage facility in the world. Combined analysis of the spatial distribution of earthquakes and regional moment tensor focal mechanisms indicate reactivation of a subsurface unnamed and unmapped left-lateral strike-slip fault. Coulomb failure stress change calculations using the relocated seismicity and slip distribution determined from regional moment tensors, allow for the possibility that the Wilzetta-Whitetail fault zone south of Cushing, Oklahoma, could produce a large, damaging earthquake comparable to the 2011 Prague event. Resultant very strong shaking levels (MMI VII) in the epicentral region present the possibility of this potential earthquake causing moderate to heavy damage to national strategic infrastructure and local communities.

Oklahoma↗

USGS2015

High‐resolution trench photomosaics from image‐based modeling: Workflow and error analysis

Photomosaics are commonly used to construct maps of paleoseismic trench exposures, but the conventional process of manually using image‐editing software is time consuming and produces undesirable artifacts and distortions. Herein, we document and evaluate the application of image‐based modeling (IBM) for creating photomosaics and 3D models of paleoseismic trench exposures, illustrated with a case‐study trench across the Wasatch fault in Alpine, Utah. Our results include a structure‐from‐motion workflow for the semiautomated creation of seamless, high‐resolution photomosaics designed for rapid implementation in a field setting. Compared with conventional manual methods, the IBM photomosaic method provides a more accurate, continuous, and detailed record of paleoseismic trench exposures in approximately half the processing time and 15%–20% of the user input time. Our error analysis quantifies the effect of the number and spatial distribution of control points on model accuracy. For this case study, an ∼87 m 2 exposure of a benched trench photographed at viewing distances of 1.5–7 m yields a model with <2 cm root mean square error (rmse) with as few as six control points. Rmse decreases as more control points are implemented, but the gains in accuracy are minimal beyond 12 control points. Spreading control points throughout the target area helps to minimize error. We propose that 3D digital models and corresponding photomosaics should be standard practice in paleoseismic exposure archiving. The error analysis serves as a guide for future investigations that seek balance between speed and accuracy during photomosaic and 3D model construction.

Bulletin of the Seismological Society of America↗

USGS2015

Tsunami recurrence in the eastern Alaska-Aleutian arc: A Holocene stratigraphic record from Chirikof Island, Alaska

Despite the role of the Alaska-Aleutian megathrust as the source of some of the largest earthquakes and tsunamis, the history of its pre–twentieth century tsunamis is largely unknown west of the rupture zone of the great (magnitude, M 9.2) 1964 earthquake. Stratigraphy in core transects at two boggy lowland sites on Chirikof Island’s southwest coast preserves tsunami deposits dating from the postglacial to the twentieth century. In a 500-m-long basin 13–15 m above sea level and 400 m from the sea, 4 of 10 sandy to silty beds in a 3–5-m-thick sequence of freshwater peat were probably deposited by tsunamis. The freshwater peat sequence beneath a gently sloping alluvial fan 2 km to the east, 5–15 m above sea level and 550 m from the sea, contains 20 sandy to silty beds deposited since 3.5 ka; at least 13 were probably deposited by tsunamis. Although most of the sandy beds have consistent thicknesses (over distances of 10–265 m), sharp lower contacts, good sorting, and/or upward fining typical of tsunami deposits, the beds contain abundant freshwater diatoms, very few brackish-water diatoms, and no marine diatoms. Apparently, tsunamis traveling inland over low dunes and boggy lowland entrained largely freshwater diatoms. Abundant fragmented diatoms, and lake species in some sandy beds not found in host peat, were probably transported by tsunamis to elevations of >10 m at the eastern site. Single-aliquot regeneration optically stimulated luminescence dating of the third youngest bed is consistent with its having been deposited by the tsunami recorded at Russian hunting outposts in 1788, and with the second youngest bed being deposited by a tsunami during an upper plate earthquake in 1880. We infer from stratigraphy, 14 C-dated peat deposition rates, and unpublished analyses of the island’s history that the 1938 tsunami may locally have reached an elevation of >10 m. As this is the first record of Aleutian tsunamis extending throughout the Holocene, we cannot estimate source earthquake locations or magnitudes for most tsunami-deposited beds. We infer that no more than 3 of the 23 possible tsunamis beds at both sites were deposited following upper plate faulting or submarine landslides independent of megathrust earthquakes. If so, the Semidi segment of the Alaska-Aleutian megathrust near Chirikof Island probably sent high tsunamis southward every 180–270 yr for at least the past 3500 yr.

Alaska↗

USGS2015

Evidence for slip partitioning and bimodal slip behavior on a single fault: Surface slip characteristics of the 2013 Mw7.7 Balochistan, Pakistan earthquake

Deformation is commonly accommodated by strain partitioning on multiple, independent strike-slip and dip-slip faults in continental settings of oblique plate convergence. As a corollary, individual faults tend to exhibit one sense of slip – normal, reverse, or strike-slip – until whole-scale changes in boundary conditions reactivate preexisting faults in a new deformation regime. In this study, we show that a single continental fault may instead partition oblique strain by alternatively slipping in a strike-slip or a dip-slip sense during independent fault slip events. We use 0.5 m resolution optical imagery and sub-pixel correlation analysis of the 200+ km 200 + km "> 2013 M w 7.7 Balochistan, Pakistan earthquake to document co-seismic surface slip characteristics and Quaternary tectonic geomorphology along the causative Hoshab fault. We find that the 2013 earthquake, which involved a ∼6:1 strike-slip to dip-slip ratio, ruptured a structurally segmented fault. Quaternary geomorphic indicators of gross fault-zone morphology reveal both reverse-slip and strike-slip deformation in the rupture area of the 2013 earthquake that varies systematically along fault strike despite nearly pure strike-slip motion in 2013. Observations of along-strike variations in range front relief and geomorphic offsets suggest that the Hoshab fault accommodates a substantial reverse component of fault slip in the Quaternary, especially along the southern section of the 2013 rupture. We surmise that Quaternary bimodal slip along the Hoshab fault is promoted by a combination of the arcuate geometry of the Hoshab fault, the frictional weakness of the Makran accretionary prism, and time variable loading conditions from adjacent earthquakes and plate interactions.

Balochistan↗

USGS2015

Coral 13C/12C records of vertical seafloor displacement during megathrust earthquakes west of Sumatra

The recent surge of megathrust earthquakes and tsunami disasters has highlighted the need for a comprehensive understanding of earthquake cycles along convergent plate boundaries. Space geodesy has been used to document recent crustal deformation patterns with unprecedented precision, however the production of long paleogeodetic records of vertical seafloor motion is still a major challenge. Here we show that carbon isotope ratios ( ) in the skeletons of massive Porites corals from west Sumatra record abrupt changes in light exposure resulting from coseismic seafloor displacements. Validation of the method is based on the coral response to uplift (and subsidence) produced by the March 2005 M w 8.6 Nias–Simeulue earthquake, and uplift further south around Sipora Island during a M&sim;8.4 megathrust earthquake in February 1797. At Nias, the average step-change in coral was 0.6±0.1&permil;/m for coseismic displacements of +1.8 m and −0.4 m in 2005. At Sipora, a distinct change in Porites microatoll growth morphology marks coseismic uplift of 0.7 m in 1797. In this shallow water setting, with a steep light attenuation gradient, the step-change in microatoll is 2.3&permil;/m , nearly four times greater than for the Nias Porites . Considering the natural variability in coral skeletal , we show that the lower detection limit of the method is around 0.2 m of vertical seafloor motion. Analysis of vertical displacement for well-documented earthquakes suggests this sensitivity equates to shallow events exceeding M w &sim;7.2 in central megathrust and back-arc thrust fault settings. Our findings indicate that the coral paleogeodesy technique could be applied to convergent tectonic margins throughout the tropical western Pacific and eastern Indian oceans, which host prolific coral reefs, and some of the world's greatest earthquake catastrophes. While our focus here is the link between coral , light exposure and coseismic crustal deformation, the same principles could be used to characterize interseismic strain during earthquake cycles over the last several millennia.

Earth and Planetary Science Letters↗

USGS2015

Updating the USGS seismic hazard maps for Alaska

The U.S. Geological Survey makes probabilistic seismic hazard maps and engineering design maps for building codes, emergency planning, risk management, and many other applications. The methodology considers all known earthquake sources with their associated magnitude and rate distributions. Specific faults can be modeled if slip-rate or recurrence information is available. Otherwise, areal sources are developed from earthquake catalogs or GPS data. Sources are combined with ground-motion estimates to compute the hazard. The current maps for Alaska were developed in 2007, and included modeled sources for the Alaska-Aleutian megathrust, a few crustal faults, and areal seismicity sources. The megathrust was modeled as a segmented dipping plane with segmentation largely derived from the slip patches of past earthquakes. Some megathrust deformation is aseismic, so recurrence was estimated from seismic history rather than plate rates. Crustal faults included the Fairweather-Queen Charlotte system, the Denali–Totschunda system, the Castle Mountain fault, two faults on Kodiak Island, and the Transition fault, with recurrence estimated from geologic data. Areal seismicity sources were developed for Benioff-zone earthquakes and for crustal earthquakes not associated with modeled faults. We review the current state of knowledge in Alaska from a seismic-hazard perspective, in anticipation of future updates of the maps. Updated source models will consider revised seismicity catalogs, new information on crustal faults, new GPS data, and new thinking on megathrust recurrence, segmentation, and geometry. Revised ground-motion models will provide up-to-date shaking estimates for crustal earthquakes and subduction earthquakes in Alaska.

Quaternary Science Reviews↗

USGS2015

Beach ridges as paleoseismic indicators of abrupt coastal subsidence during subduction zone earthquakes, and implications for Alaska-Aleutian subduction zone paleoseismology, southeast coast of the Kenai Peninsula, Alaska

The Kenai section of the eastern Alaska-Aleutian subduction zone straddles two areas of high slip in the 1964 great Alaska earthquake and is the least studied of the three megathrust segments (Kodiak, Kenai, Prince William Sound) that ruptured in 1964. Investigation of two coastal sites in the eastern part of the Kenai segment, on the southeast coast of the Kenai Peninsula, identified evidence for two subduction zone earthquakes that predate the 1964 earthquake. Both coastal sites provide paleoseismic data through inferred coseismic subsidence of wetlands and associated subsidence-induced erosion of beach ridges. At Verdant Cove, paleo-beach ridges record the paleoseismic history; whereas at Quicksand Cove, buried soils in drowned coastal wetlands are the primary indicators of paleoearthquake occurrence and age. The timing of submergence and death of trees mark the oldest earthquake at Verdant Cove that is consistent with the age of a well documented &sim;900-year-ago subduction zone earthquake that ruptured the Prince William Sound segment of the megathrust to the east and the Kodiak segment to the west. Soils buried within the last 400–450 years mark the penultimate earthquake on the southeast coast of the Kenai Peninsula. The penultimate earthquake probably occurred before AD 1840 from its absence in Russian historical accounts. The penultimate subduction zone earthquake on the Kenai segment did not rupture in conjunction with the Prince William Sound to the northeast. Therefore the Kenai segment, which is presently creeping, can rupture independently of the adjacent Prince William Sound segment that is presently locked.

Alaska↗

USGS2015

Time-varying interseismic strain rates and similar seismic ruptures on the Nias-Simeulue patch of the Sunda megathrust

Fossil coral microatolls from fringing reefs above the great ( M W 8.6) megathrust rupture of 2005 record uplift during the historically reported great earthquake of 1861. Such evidence spans nearly the entire 400-km strike length of the 2005 rupture, which was previously shown to be bounded by two persistent barriers to seismic rupture. Moreover, at sites where we have constrained the 1861 uplift amplitude, it is comparable to uplift in 2005. Thus the 1861 and 2005 ruptures appear to be similar in both extent and magnitude. At one site an uplift around AD 1422 also appears to mimic the amount of uplift in 2005. The high degree of similarity among certain ruptures of this Nias–Simeulue section of the Sunda megathrust contrasts with the substantial disparities amongst ruptures along other sections of the Sumatran portion of the Sunda megathrust. At a site on the northwestern tip of Nias, reefs also rose during an earthquake in AD 1843, known historically for its damaging tsunami along the eastern coast of the island. The coral microatolls also record interseismic vertical deformation, at annual to decadal resolution, spanning decades to more than a century before each earthquake. The corals demonstrate significant changes over time in the rates of interseismic deformation. On southern Simeulue, interseismic subsidence rates were low between 1740 and 1820 but abruptly increased by a factor of 4–10, two to four decades before the 1861 rupture. This may indicate that full coupling or deep locking of the megathrust began only a few decades before the great earthquake. In the Banyak Islands, near the pivot line separating coseismic uplift from subsidence in 2005, ongoing interseismic subsidence switched to steady uplift from 1966 until 1981, suggesting a 15-year-long slow slip event, with slip velocities at more than 120% of the plate convergence rate

Niase-Simeulue region↗