Geology topics

Richard D Koehler

Publications and source records attributed to Richard D Koehler.

7 recordsLinked to original sources

USGS2023

Rapid surface rupture mapping from satellite data: The 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence

The 6 February 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence produced > 500 km of surface rupture primarily on the left‐lateral East Anatolian (~345 km) and Çardak (~175 km) faults. Constraining the length and magnitude of surface displacement on the causative faults is critical for loss estimates, recovery efforts, rapid identification of impacted infrastructure, and fault displacement hazard analysis. To support these efforts, we rapidly mapped the surface rupture from satellite data with support from remote sensing and field teams, and released the results to the public in near‐real time. Detailed surface rupture mapping commenced on 7 February and continued as high‐resolution (< 1.0 m/pixel) optical images from WorldView satellites (2023 Maxar) became available. We interpreted the initial simplified rupture trace from subpixel offset fields derived from Advanced Land Observation Satellite2 and Sentinel‐1A synthetic aperture radar image pairs available on 8 and 10 February, respectively. The mapping was released publicly on 10 February, with frequent updates, and published in final form four months postearthquake ( Reitman, Briggs, et al. , 2023 ). This publicly available, rapid mapping helped guide fieldwork and constrained U.S. Geological Survey finite‐fault and loss estimate models, as well as stress change estimates and dynamic rupture models.

Kahramanmaraş↗

USGS2021

Field response and surface rupture characteristics of the 2020 M6.5 Monte Cristo Range earthquake, central Walker Lane, Nevada

The M 6.5 Monte Cristo Range earthquake that occurred in the central Walker Lane on 15 May 2020 was the largest earthquake in Nevada in 66 yr and resulted in a multidisciplinary scientific field response. The earthquake was the result of left‐lateral slip along largely unmapped parts of the Candelaria fault, one of a series of east–northeast‐striking faults that comprise the Mina deflection, a major right step in the north–northwest structural grain of the central Walker Lane. We describe the characteristics of the surface rupture and document distinct differences in the style and orientation of fractures produced along the 28 km long rupture zone. Along the western part of the rupture, left‐lateral and extensional displacements occurred along northeasterly and north‐striking planes that splay off the eastern termination of the mapped Candelaria fault. To the east, extensional and right‐lateral displacements occurred along predominantly north‐striking planes that project toward well‐defined Quaternary and bedrock faults. Although, the largest left‐lateral displacement observed was ∼ 20 cm ⁠ , the majority of displacements were < 5 cm and were distributed across broad zones up to 800 m wide, which are not likely to be preserved in the geologic record. The complex pattern of surface rupture is consistent with a network of faults defined in the shallow subsurface by aftershock seismicity and suggests that slip partitioning between east‐striking left‐lateral faults and north to northwest‐striking right‐lateral faults plays an important role in accommodating northwest‐directed transtension in the central Walker Lane.

Nevada↗

USGS2021

Surface Rupture Map of the 2020 M 6.5 Monte Cristo Range earthquake, Esmeralda and Mineral counties, Nevada

The 15 May 2020, M6.5 Monte Cristo Range earthquake was the largest earthquake in Nevada in over 66 years and occurred in a sparsely populated area of western Nevada about 74 km southeast of the town of Hawthorne. The earthquake produced surface rupture distributed across a 28-km-long zone along the eastward projection of the Candelaria fault in the Mina deflection of the central Walker Lane. Post-event field surveys mapped surface ruptures and measured displacements, which reached up to ~20 cm of oblique slip. Additional detailed mapping was completed using centimeter-resolution orthomosaics generated from Uncrewed Aerial Vehicle surveys. The rupture observations and displacement data are compiled into this 1:14,000-scale map, data tables, and accompanying digital dataset. The rupture consists of two distinct deformational domains roughly separated by U.S. Highway 95: ENE-trending ruptures with normal and left-oblique displacements in the western domain, and N- to NNE-trending ruptures with normal and right-oblique displacement in the eastern domain. The complex pattern of surface rupture is consistent with the projections of mapped bedrock and Quaternary faults in the area and illustrates the kinematics of slip partitioning at the junction of variably oriented structures in the shallow subsurface.

Nevada↗

USGS2020

Documentation of Surface Fault Rupture and Ground‐Deformation Features Produced by the 4 and 5 July 2019 Mw 6.4 and Mw 7.1 Ridgecrest Earthquake Sequence

The M w "> M w Mw 6.4 and M w "> M w Mw 7.1 Ridgecrest earthquake sequence occurred on 4 and 5 July 2019 within the eastern California shear zone of southern California. Both events produced extensive surface faulting and ground deformation within Indian Wells Valley and Searles Valley. In the weeks following the earthquakes, more than six dozen scientists from government, academia, and the private sector carefully documented the surface faulting and ground‐deformation features. As of December 2019, we have compiled a total of more than 6000 ground observations; approximately 1500 of these simply note the presence or absence of fault rupture or ground failure, but the remainder include detailed descriptions and other documentation, including tens of thousands of photographs. More than 1100 of these observations also include quantitative field measurements of displacement sense and magnitude. These field observations were supplemented by mapping of fault rupture and ground‐deformation features directly in the field as well as by interpreting the location and extent of surface faulting and ground deformation from optical imagery and geodetic image products. We identified greater than 68 km of fault rupture produced by both earthquakes as well as numerous sites of ground deformation resulting from liquefaction or slope failure. These observations comprise a dataset that is fundamental to understanding the processes that controlled this earthquake sequence and for improving earthquake hazard estimates in the region. This article documents the types of data collected during postearthquake field investigations, the compilation effort, and the digital data products resulting from these efforts.

California↗

USGS2020

Surface displacement distributions for the July 2019 Ridgecrest, California earthquake ruptures

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the M w "> M w 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the M w "> M w 7.1 mainshock. We present > 650 "> > 650 field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the M w "> M w 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The M w "> M w 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the M w "> M w 7.1 rupture. The M w "> M w 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The M w "> M w 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the M w "> M w 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the M w "> M w 7.1 rupture. The steepest gradients ( ⁠ ∼ 1 – 3    m / km "> ∼ 1 – 3 m / km ⁠ ) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 M w "> M w 7.3 Landers and 1999 M w "> M w 7.1 Hector Mine earthquakes are < 0.6    m / km "> < 0.6 m / km . Our displacement distributions are important for understanding the influence of cross‐fault rupture on M w "> M w 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

California↗

USGS2019

Evidence for frequent, large tsunamis spanning locked and creeping parts of the Aleutian megathrust

At the eastern end of the 1957 Andreanof Islands magnitude-8.6 earthquake rupture, Driftwood Bay (Umnak Island) and Stardust Bay (Sedanka Island) lie along presently locked and creeping parts of the Aleutian megathrust, respectively, based on satellite geodesy onshore. Both bays, located 200-km apart, face the Aleutian trench and harbor coastal evidence for tsunami inundation in 1957. Here we describe the evidence at Driftwood Bay, including eight sheets of landward-fining, normally-graded marine sand that extend up to 375-m inland and 23 m above mean tide level. Drift logs that corroborate historical accounts of 1957 tsunami runup on Umnak Island’s Pacific coast overlie the youngest sand sheet, which 137Cs activity shows was deposited in the decade before 1963. The older sand sheets probably record tsunamis prior to 1957 because an emergent coastal terrace lacks evidence for storm-wave erosion and overwash since ~2 ka. Comparisons of the Driftwood Bay and Stardust Bay tsunami histories suggest that at least twice in the past 1700 years inundation occurred at one site but not the other. In contrast, Bayesian age-depth modeling suggests that the two bays may record five tsunamis like the 1957 tsunami, generated by earthquake ruptures that spanned the presently locked and creeping parts of the Aleutian megathrust. However, serial tsunamis occurring within days to centuries cannot be precluded. Our findings imply 164–257-year recurrence intervals for large eastern Aleutian tsunamis and challenge the notion that creeping parts of the megathrust inferred from geodesy onshore pose lower earthquake and tsunami hazards than locked areas.

Geological Society of America Bulletin↗

USGS2019

Preliminary report on engineering and geological effects of the July 2019 Ridgecrest earthquake sequence

The Ridgecrest Earthquake sequence included a foreshock event on July 4 2019 (M6.4) and a M7.1 mainshock event on July 5 2019. These events occurred in the Eastern California Shear Zone, near Indian Wells Valley, south of China Lake and west of Searles Valley. GEER has partnered with several organizations to collect perishable data and document the important impacts of these events, including the US Geological Survey, the California Geological Survey, the US Navy, the Southern California Earthquake Center, and local utilities. Critical geotechnical features of this event are extensive left-lateral (M6.4 event) and right-lateral (M7.1 event) surface ruptures over fault segments of variable complexity and width as well as across extensional and compressive step-over zones. We also document lifeline performance at fault crossings (gas, water, electrical), mainshock slip and afterslip, liquefaction and lateral spreading features, and liquefaction effects on structures. These effects are documented using field (ground) mapping and aerial imagery that will support subsequent development of high-resolution digital elevation models. Over 750 ground motions were recorded from the foreshock and mainshock alone, with many additional aftershock records. The data demonstrate significant impacts of site response and rupture directivity on ground motion attributes.

Report↗