Ray M. Boswell | Geology Reports

USGS2022

Alaska North Slope terrestrial gas hydrate systems: Insights from scientific drilling

A wealth of information has been accumulated regarding the occurrence of gas hydrates in nature, leading to significant advancements in our understanding of the geologic controls on their occurrence in both the terrestrial and marine settings of the Arctic. Gas hydrate accumulations discovered in the Alaska North Slope have been the focus of several important geoscience and production testing research programs. The Mount Elbert Gas Hydrate Stratigraphic Test Well of 2007 yielded one of the most complete geologic datasets on Arctic gas hydrate systems and important reservoir engineering data. The 2011/2012 field test of the Iġnik Sikumi gas hydrate production test well provided important insight into gas hydrate production technologies, yielding additional information on the petrophysical properties of gas hydrate reservoir systems. The Hydrate-01 Stratigraphic Test Well, drilled late in 2018, confirmed the geologic conditions at an Alaska North Slope drill site that was selected for an extended gas hydrate production test. In 2018, the US Geological Survey used information derived from previous scientific drilling programs to assess the volume of undiscovered, technically recoverable gas resources at a mean estimate of about 54 trillion cubic feet (~1.5 trillion cubic meters) within the gas hydrates in the North Slope of Alaska. This assessment has shown that the amount of gas stored as gas hydrates in this area is equal to about half of the known volume of conventional natural gas resources in the region.

Alaska↗

USGS2011

Physical properties of sediment from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

This study characterizes cored and logged sedimentary strata from the February 2007 BP Exploration Alaska, Department of Energy, U.S. Geological Survey (BPXA-DOE-USGS) Mount Elbert Gas Hydrate Stratigraphic Test Well on the Alaska North Slope (ANS). The physical-properties program analyzed core samples recovered from the well, and in conjunction with downhole geophysical logs, produced an extensive dataset including grain size, water content, porosity, grain density, bulk density, permeability, X-ray diffraction (XRD) mineralogy, nuclear magnetic resonance (NMR), and petrography. This study documents the physical property interrelationships in the well and demonstrates their correlation with the occurrence of gas hydrate. Gas hydrate (GH) occurs in three unconsolidated, coarse silt to fine sand intervals within the Paleocene and Eocene beds of the Sagavanirktok Formation: Unit D-GH (614.4 m-627.9 m); unit C-GH1 (649.8 m-660.8 m); and unit C-GH2 (663.2 m-666.3 m). These intervals are overlain by fine to coarse silt intervals with greater clay content. A deeper interval (unit B) is similar lithologically to the gas-hydrate-bearing strata; however, it is water-saturated and contains no hydrate. In this system it appears that high sediment permeability (k) is critical to the formation of concentrated hydrate deposits. Intervals D-GH and C-GH1 have average "plug" intrinsic permeability to nitrogen values of 1700 mD and 675 mD, respectively. These values are in strong contrast with those of the overlying, gas-hydrate-free sediments, which have k values of 5.7 mD and 49 mD, respectively, and thus would have provided effective seals to trap free gas. The relation between permeability and porosity critically influences the occurrence of GH. For example, an average increase of 4% in porosity increases permeability by an order of magnitude, but the presence of a second fluid (e.g., methane from dissociating gas hydrate) in the reservoir reduces permeability by more than an order of magnitude.

Alaska↗