Geology Reports⌕ Search

Geology topics

Ray E. Wells

Publications and source records attributed to Ray E. Wells.

At least 37 records · Page 2Linked to original sources
USGS2012

Paleomagnetism of Middle Tertiary volcanic rocks from the Western Cascade Series, northern California

The Western Cascade Series (WCS) is a 3.5‐km‐thick, crudely homoclinal (east dipping) calcalkaline volcanic sequence of mid‐Oligocene to early Miocene age that crops out near the southern tip of the Cascade Range in northern California. The mean direction of remanent magnetization in the WCS is D, 4.9°; I, 57.6° (N, 53; k, 14.4; α 95 , 5.3°). When compared to a reference direction for the North American craton, the WCS direction indicates that the southern Cascade Range has rotated 14.0° ± 9.0° since the WCS accumulated. A difference in mean direction between the lower and upper halves of the WCS suggests that much of this rotation occurred during the late Oligocene. Six other paleomagnetic studies of rock units of an age roughly comparable to the WCS also are available from western Oregon, northwestern California, and southwestern Washington. All show statistically significant clockwise rotation (inclinations of all but one are concordant). Comparison of directions indicates that the Pacific Northwest did not rotate as a rigid body, but neither did it behave as a collection of small, independently rotating domains. The amount of rotation found throughout the area increases to the west or northwest, suggesting a driving force for rotation operating at the continental margin.

California↗
USGS2012

Paleomagnetism of the Tertiary Clarno Formation of central Oregon and its significance for the tectonic history of the Pacific Northwest

The Clarno Formation, a mostly Eocene and partly early Oligocene sequence of andesitic lavas and volcaniclastic rocks, is the oldest Tertiary formation exposed in north central Oregon. Remanent magnetization directions at 46 sites in the lavas provide a paleomagnetic pole at 84°N, 278°E with a 95% confidence cone of 7°. Comparison of this pole with the North American reference pole for Eocene time indicates that the Clarno Formation has rotated 16° clockwise with an uncertainty of 10° but has undergone no significant latitudinal displacement. Further comparison with paleomagnetic data from the Miocene Columbia River Basalt Group and Steens Basalt shows that large‐scale block rotations in the eastern Columbia Embayment ceased sometime between 38 m.y. and 15 m.y. A paleogeographic reconstruction for 38 m.y. is offered which is consistent with the observed rotation of the Clarno and with the other paleomagnetic data from the Pacific Northwest, which are briefly reviewed. This reconstruction shows that it is possible to account for virtually all of the paleomagnetically indicated rotations in pre‐Miocene Tertiary rocks of the Pacific Northwest by an extensional tectonic model. As a consequence, only part of the rotations in the pre‐Tertiary rocks of the eastern Columbia Embayment need to be the result of accretionary tectonics. The initiation of magmatism in the eastern Columbia Embayment that is represented by the Clarno Formation itself may have been contemporaneous with the beginning of crustal extension in the Pacific Northwest.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Tectonic setting of the Wooded Island earthquake swarm, eastern Washington

Magnetic anomalies provide insights into the tectonic implications of a swarm of ~1500 shallow (~1 km deep) earthquakes that occurred in 2009 on the Hanford site,Washington. Epicenters were concentrated in a 2 km2 area nearWooded Island in the Columbia River. The largest earthquake (M 3.0) had first motions consistent with slip on a northwest-striking reverse fault. The swarm was accompanied by 35 mm of vertical surface deformation, seen in satellite interferometry (InSAR), interpreted to be caused by ~50 mm of slip on a northwest-striking reverse fault and associated bedding-plane fault in the underlying Columbia River Basalt Group (CRBG). A magnetic anomaly over exposed CRBG at Yakima Ridge 40 km northwest of Wooded Island extends southeastward beyond the ridge to the Columbia River, suggesting that the Yakima Ridge anticline and its associated thrust fault extend southeastward in the subsurface. In map view, the concealed anticline passes through the earthquake swarm and lies parallel to reverse faults determined from first motions and InSAR data. A forward model of the magnetic anomaly near Wooded Island is consistent with uplift of concealed CRBG, with the top surface <200 m below the surface. The earthquake swarm and the thrust and bedding-plane faults modeled from interferometry all fall within the northeastern limb of the faulted anticline. Although fluids may be responsible for triggering the Wooded Island earthquake swarm, the seismic and aseismic deformation are consistent with regional-scale tectonic compression across the concealed Yakima Ridge anticline.

Washington↗
USGS2012

History of earthquakes and tsunamis along the eastern Aleutian-Alaska megathrust, with implications for tsunami hazards in the California Continental Borderland

During the past several years, devastating tsunamis were generated along subduction zones in Indonesia, Chile, and most recently Japan. Both the Chile and Japan tsunamis traveled across the Pacific Ocean and caused localized damage at several coastal areas in California. The question remains as to whether coastal California, in particular the California Continental Borderland, is vulnerable to more extensive damage from a far-field tsunami sourced along a Pacific subduction zone. Assuming that the coast of California is at risk from a far-field tsunami, its coastline is most exposed to a trans-Pacific tsunami generated along the eastern Aleutian-Alaska subduction zone. We present the background geologic constraints that could control a possible giant (M w ~9) earthquake sourced along the eastern Aleutian-Alaska megathrust. Previous great earthquakes (M w ~8) in 1788, 1938, and 1946 ruptured single segments of the eastern Aleutian-Alaska megathrust. However, in order to generate a giant earthquake, it is necessary to rupture through multiple segments of the megathrust. Potential barriers to a throughgoing rupture, such as high-relief fracture zones or ridges, are absent on the subducting Pacific Plate between the Fox and Semidi Islands. Possible asperities (areas on the megathrust that are locked and therefore subject to infrequent but large slip) are identified by patches of high moment release observed in the historical earthquake record, geodetic studies, and the location of forearc basin gravity lows. Global Positioning System (GPS) data indicate that some areas of the eastern Aleutian-Alaska megathrust, such as that beneath Sanak Island, are weakly coupled. We suggest that although these areas will have reduced slip during a giant earthquake, they are not really large enough to form a barrier to rupture. A key aspect in defining an earthquake source for tsunami generation is determining the possibility of significant slip on the updip end of the megathrust near the trench. Large slip on the updip part of the eastern Aleutian-Alaska megathrust is a viable possibility owing to the small frontal accretionary prism and the presence of arc basement relatively close to the trench along most of the megathrust.

Alaska. California↗
USGS2011

Linking middle-school teachers to Earthscope

EarthScope is a multidisciplinary geophysical investigation of the structure and deformation of the North American continent. Components include a transportable array of digital seismometers (USArray) that will image the continental crust and underlying mantle, and Global Positioning System (GPS) receivers and strainmeters (Plate Boundary Observatory, PBO) that will measure tectonic and volcanic deformations Translating geophysics for kindergarten through 12th grade (K‐12) teachers and their students involves inviting them to explore new understandings of how Earth works. When they construct their understanding of Earth science through geophysical problem solving, these learners can engage in Earth‐Scope, which offers unprecedented public access to data from seismology and geodesy.

Eos, Transactions, American Geophysical Union↗
USGS2011

A tunnel runs through it — An inside view of the Tualatin Mountains, Oregon

The Tualatin Mountains form a northwest-striking ridge about 350 m high that separates Portland, Oregon, from the cities of the Tualatin Valley to the west. Known informally as the Portland Hills, the ridge is a late Cenozoic anticline, bounded by reverse faults that dip toward the anticlinal axis. The anticline is a broad, open fold consisting chiefly of Miocene Columbia River Basalt Group, with remnants of Miocene-Pliocene Troutdale Formation and Pleistocene basalt of the Boring Volcanic Field on the flanks of the anticline. Anticlinal structures similar to the Tualatin Mountains are characteristic of the northern Willamette Valley, where the structures accommodate margin-parallel shortening of the Cascadia fore arc. Global Positioning System (GPS) results indicate that the shortening is due to the northward motion of Oregon at several millimeters per year with respect to stable North America. Some of the uplifts may contain active faults, but the structures are poorly exposed and are overlain by thick Pleistocene loess and Missoula flood deposits. Between 1993 and 1998, construction of the 3-mile-long (4500-m-long) TriMet MAX Light Rail tunnel through the Tualatin Mountains provided an unusual opportunity to investigate the geological structure and history of the Tualatin Mountains. This report is a collaborative effort among the tunnel geologists and the U.S. Geological Survey (USGS) to document the geologic story and quantify late Cenozoic and Quaternary deformation rates of the Tualatin Mountains.

Oregon↗
USGS2011

Lidar-revised geologic map of the Uncas 7.5' quadrangle, Clallam and Jefferson Counties, Washington

In 2000 and 2001, the Puget Sound Lidar Consortium obtained 1 pulse/m 2 lidar data for about 65 percent of the Uncas 7.5' quadrangle. For a brief description of LIDAR (LIght Detection And Ranging) and this data acquisition program, see Haugerud and others (2003). This map combines geologic interpretation (mostly by Haugerud and Tabor) of the 6-ft (2-m) lidar-derived digital elevation model (DEM) with the geology depicted on the Preliminary Geologic Map of the Uncas 7.5' Quadrangle, Clallam and Jefferson Counties, Washington, by Peter J. Haeussler and others (1999). The Uncas quadrangle in the northeastern Olympic Peninsula covers the transition from the accreted terranes of the Olympic Mountains on the west to the Tertiary and Quaternary basin fills of the Puget Lowland to the east. Elevations in the map area range from sea level at Port Discovery to 4,116 ft (1,255 m) on the flank of the Olympic Mountains to the southwest. Previous geologic mapping within and marginal to the Uncas quadrangle includes reports by Cady and others (1972), Brown and others (1960), Tabor and Cady (1978a), Yount and Gower (1991), and Yount and others (1993). Paleontologic and stratigraphic investigations by University of Washington graduate students (Allison, 1959; Thoms, 1959; Sherman, 1960; Hamlin, 1962; Spencer, 1984) also encompass parts of the Uncas quadrangle. Haeussler and Wells mapped in February 1998, following preliminary mapping by Yount and Gower in 1976 and 1979. The description of surficial map units follows Yount and others (1993) and Booth and Waldron (2004). Bedrock map units are modified from Yount and Gower (1991) and Spencer (1984). We used the geologic time scale of Gradstein and others (2005). The Uncas quadrangle lies in the forearc of the Cascadia subduction zone, about 6.25 mi (10 km) east of the Cascadia accretionary complex exposed in the core of the Olympic Mountains (Tabor and Cady, 1978b). Underthrusting of the accretionary complex beneath the forearc uplifted and tilted eastward the Coast Range basalt basement and overlying marginal basin strata, which comprise most of the rocks of the Uncas quadrangle. The Eocene submarine and subaerial tholeiitic basalt of the Crescent Formation on the Olympic Peninsula is thought to be the exposed mafic basement of the Coast Range, which was considered by Snavely and others (1968) to be an oceanic terrane accreted to the margin in Eocene time. In this interpretation, the Coast Range basalt terrane may have originated as an oceanic plateau or by oblique marginal rifting, but its subsequent emplacement history was complex (Wells and others, 1984). Babcock and others (1992) and Haeussler and others (2003) favor the interpretation that the basalts were the product of an oceanic spreading center interacting with the continental margin. Regardless of their origin, onlapping strata in southern Oregon indicate that the Coast Range basalts were attached to North America by 50 Ma; but on southern Vancouver Island, where the terrane-bounding Leech River Fault is exposed, Brandon and Vance (1992) concluded that suturing to North America occurred in the broad interval between 42 and 24 Ma. After emplacement of the Coast Range basalt terrane, the Cascadia accretionary wedge developed by frontal accretion and underplating (Tabor and Cady, 1978b; Clowes and others, 1987). Domal uplift of the part of the accretionary complex beneath the Olympic Mountains occurred after ~18 Ma (Brandon and others, 1998). Continental and alpine glaciation during Quaternary time reshaped the uplifted rocks of the Olympic Mountains.

Washington↗
USGS2010

Cenozoic plate motions and the volcano-tectonic evolution of western Oregon and Washington

A refined northeast Pacific plate-motion model provides a framework for analysis of the Tertiary volcanic and tectonic history of western Oregon and Washington. We examine three possible models for the origin of the allochthonous Paleocene and Eocene oceanic basalt basement of the Coast Range: (1) accretion to the continent of hot spot generated linear seamount chains; (2) accretion of thick oceanic crust and seamounts generated during Farallon-Kula spreading reorganizations between 61 and 48 Ma; and (3) eruption of basalt during oblique rifting of the continental margin as it overrode an active Yellowstone hot spot on the Kula-Farallon ridge. The plate model suggests that microplate rotation and accretion of hot spot generated linear aseismic ridges cannot be easily reconciled with rapid northeast motion of the KuIa and Farallon plates and the well-established paleomagnetic rotations. Following emplacement of the Coast Range basement, changes in the character of forearc, back arc and Cascade arc volcanism correlate with a marked decrease in the rate of Farallon-North America convergence between 43 and and 28 Ma. This slowdown may be responsible for (1) westward stepping of the volcanic arc front from the Challis axis to a Cascade axis at about 42 Ma; (2) a subsequent episode of increased ash flow tuff volcanism and extension in the Cascade arc between 37 and 18 Ma that correlates with the “ignimbrite flare-up” in the Basin and Range; and (3) a period of extensional basaltic and alkalic volcanism and intrusion in the Coast Range between 44 and 28 Ma. Reduction of the convergence rate and westward stepping of the flexure in the subducted slab may have reduced the horizontal compressive stress on the continent, allowing increased injection of magma into the crust, development of large, shallow magma chambers, and the outbreak of extensional volcanism over a large area behind the Farallon-North America subduction zone.

Oregon, Washington↗
USGS2009

The Columbia River Basalt Group: from the gorge to the sea

Miocene flood basalts of the Columbia River Basalt Group inundated eastern Washington, Oregon, and adjacent Idaho between 17 and 6 Ma. Some of the more voluminous flows followed the ancestral Columbia River across the Cascade arc, Puget-Willamette trough, and the Coast Range to the Pacific Ocean. We have used field mapping, chemistry, and paleomagnetic directions to trace individual flows and flow packages from the Columbia River Gorge westward into the Astoria Basin, where they form pillow palagonite complexes and mega-invasive bodies into older marine sedimentary rocks. Flows of the Grande Ronde, Wanapum, and Saddle Mountains Basalts all made it to the ocean; at least 33 flows are recognized in the western Columbia River Gorge, 50 in the Willamette Valley, 16 in the lower Columbia River Valley, and at least 12 on the Oregon side of the Astoria Basin. In the Astoria Basin, the basalt flows loaded and invaded the wet marine sediments, producing peperite breccias, soft sediment deformation, and complex invasive relations. Mega-invasive sills up to 500 m thick were emplaced into strata as old as Eocene, and invasive dikes up to 90 m thick can be traced continuously for 25 km near the basin margin. Mega-pillow complexes up to a kilometer thick are interpreted as the remains of lava deltas that prograded onto the shelf and a filled submarine canyon southeast of Astoria, possibly providing the hydraulic head for injection of invasive sills and dikes at depth.

Oregon;Washington↗
USGS2009

Geologic Map of the Carlton Quadrangle, Yamhill County, Oregon

The Carlton, Oregon, 7.5-minute quadrangle is located in northwestern Oregon, about 35 miles (57 km) southwest of Portland. It encompasses the towns of Yamhill and Carlton in the northwestern Willamette Valley and extends into the eastern flank of the Oregon Coast Range. The Carlton quadrangle is one of several dozen quadrangles being mapped by the U.S. Geological Survey (USGS) and the Oregon Department of Geology and Mineral Industries (DOGAMI) to provide a framework for earthquake- hazard assessments in the greater Portland, Oregon, metropolitan area. The focus of USGS mapping is on the structural setting of the northern Willamette Valley and its relation to the Coast Range uplift. Mapping was done in collaboration with soil scientists from the National Resource Conservation Service, and the distribution of geologic units is refined over earlier regional mapping (Schlicker and Deacon, 1967). Geologic mapping was done on 7.5-minute topographic base maps and digitized in ArcGIS to produce ArcGIS geodatabases and PDFs of the map and text. The geologic contacts are based on numerous observations and samples collected in 2002 and 2003, National Resource Conservation Service soils maps, and interpretations of 7.5-minute topography. The map was completed before new, high-resolution laser terrain mapping was flown for parts of the northern Willamette Valley in 2008.

Open-File Report↗
USGS2009

The Portland Basin: A (big) river runs through it

Metropolitan Portland, Oregon, USA, lies within a small Neogene to Holocene basin in the forearc of the Cascadia subduction system. Although the basin owes its existence and structural development to its convergent-margin tectonic setting, the stratigraphic architecture of basin-fill deposits chiefly reflects its physiographic position along the lower reaches of the continental-scale Columbia River system. As a result of this globally unique setting, the basin preserves a complex record of aggradation and incision in response to distant as well as local tectonic, volcanic, and climatic events. Voluminous flood basalts, continental and locally derived sediment and volcanic debris, and catastrophic flood deposits all accumulated in an area influenced by contemporaneous tectonic deformation and variations in regional and local base level.

Oregon↗
USGS2007

Fault locking, block rotation and crustal deformation in the Pacific Northwest

We interpret Global Positioning System (GPS) measurements in the northwestern United States and adjacent parts of western Canada to describe relative motions of crustal blocks, locking on faults and permanent deformation associated with convergence between the Juan de Fuca and North American plates. To estimate angular velocities of the oceanic Juan de Fuca and Explorer plates and several continental crustal blocks, we invert the GPS velocities together with seafloor spreading rates, earthquake slip vector azimuths and fault slip azimuths and rates. We also determine the degree to which faults are either creeping aseismically or, alternatively, locked on the block-bounding faults. The Cascadia subduction thrust is locked mainly offshore, except in central Oregon, where locking extends inland. Most of Oregon and southwest Washington rotate clockwise relative to North America at rates of 0.4–1.0 ° Myr −1 . No shear or extension along the Cascades volcanic arc has occurred at the mm/yr level during the past decade, suggesting that the shear deformation extending northward from the Walker Lane and eastern California shear zone south of Oregon is largely accommodated by block rotation in Oregon. The general agreement of vertical axis rotation rates derived from GPS velocities with those estimated from palaeomagnetic declination anomalies suggests that the rotations have been relatively steady for 10–15 Ma. Additional permanent dextral shear is indicated within the Oregon Coast Range near the coast. Block rotations in the Pacific Northwest do not result in net westward flux of crustal material—the crust is simply spinning and not escaping. On Vancouver Island, where the convergence obliquity is less than in Oregon and Washington, the contractional strain at the coast is more aligned with Juan de Fuca—North America motion. GPS velocities are fit significantly better when Vancouver Island and the southern Coast Mountains move relative to North America in a block-like fashion. The relative motions of the Oregon, western Washington and Vancouver Island crustal blocks indicate that the rate of permanent shortening, the type that causes upper plate earthquakes, across the Puget Sound region is 4.4 ± 0.3 mm yr −1 . This shortening is likely distributed over several faults but GPS data alone cannot determine the partitioning of slip on them. The transition from predominantly shear deformation within the continent south of the Mendocino Triple Junction to predominantly block rotations north of it is similar to changes in tectonic style at other transitions from shear to subduction. This similarity suggests that crustal block rotations are enhanced in the vicinity of subduction zones possibly due to lower resisting stress.

Geophysical Journal International↗
USGS2007

Field and laboratory data From an earthquake history study of scarps of the Lake Creek-Boundary Creek fault between the Elwha River and Siebert Creek, Clallam County, Washington

Fault scarps recently discovered on Airborne Laser Swath Mapping (ALSM; also known as LiDAR) imagery show Holocene movement on the Lake Creek–Boundary Creek fault on the north flank of the Olympic Mountains of northwestern Washington State. Such recent movement suggests the fault is a potential source of large earthquakes. As part of the effort to assess seismic hazard in the Puget Sound region, we map scarps on ALSM imagery and show primary field and laboratory data from backhoe trenches across scarps that are being used to develop a latest Pleistocene and Holocene history of large earthquakes on the fault. Although some scarp segments 0.5–2 km long along the fault are remarkably straight and distinct on shaded ASLM imagery, most scarps displace the ground surface <1 m, and, therefore, are difficult to locate in dense brush and forest. We are confident of a surface-faulting or folding origin and a latest Pleistocene to Holocene age only for scarps between Lake Aldwell and the easternmost fork of Siebert Creek, a distance of 22 km. Stratigraphy in five trenches at four sites help determine the history of surface-deforming earthquakes since glacier recession and alluvial deposition 11–17 ka. Although the trend and plunge of indicators of fault slip were measured only in the weathered basalt exposed in one trench, upward-splaying fault patterns and inconsistent displacement of successive beds along faults in three of the five trenches suggest significant lateral as well as vertical slip during the surface-faulting or folding earthquakes that produced the scarps. Radiocarbon ages on fragments of wood charcoal from two wedges of scarp-derived colluvium in a graben-fault trench suggest two surface-faulting earthquakes between 2,000 and 700 years ago. The three youngest of nine radiocarbon ages on charcoal fragments from probable scarp-derived colluvum in a fold-scarp trench 1.2 km to the west suggest a possible earlier surface-faulting earthquake less than 5,000 years ago.

Washington↗
USGS2006

Map showing features and displacements of the Scenic Drive landslide, La Honda, California, during the period March 31, 2005–November 5, 2006

The Scenic Drive landslide in La Honda, San Mateo County, California began movement during the El Ni ñ o winter of 1997-98. Recurrent motion occurred during the mild El Ni ñ o winter of 2004-2005 and again during the winter of 2005-06. This report documents the changing geometry and motion of the Scenic Drive landslide in 2005-2006, and it documents changes and persistent features that we interpret to reflect underlying structural control of the landslide. We have also compared the displacement history to near-real time rainfall history at a continuously recording gauge for the period October 2004-November 2006.

California↗
USGS2004

Interpretation of the Seattle Uplift, Washington, as a passive-roof duplex

We interpret seismic lines and a wide variety of other geological and geophysical data to suggest that the Seattle uplift is a passive-roof duplex. A passive-roof duplex is bounded top and bottom by thrust faults with opposite senses of vergence that form a triangle zone at the leading edge of the advancing thrust sheet. In passive-roof duplexes the roof thrust slips only when the floor thrust ruptures. The Seattle fault is a south-dipping reverse fault forming the leading edge of the Seattle uplift, a 40-km-wide fold-and-thrust belt. The recently discovered, north-dipping Tacoma reverse fault is interpreted as a back thrust on the trailing edge of the belt, making the belt doubly vergent. Floor thrusts in the Seattle and Tacoma fault zones, imaged as discontinuous reflections, are interpreted as blind faults that flatten updip into bedding plane thrusts. Shallow monoclines in both the Seattle and Tacoma basins are interpreted to overlie the leading edges of thrust-bounded wedge tips advancing into the basins. Across the Seattle uplift, seismic lines image several shallow, short-wavelength folds exhibiting Quaternary or late Quaternary growth. From reflector truncation, several north-dipping thrust faults (splay thrusts) are inferred to core these shallow folds and to splay upward from a shallow roof thrust. Some of these shallow splay thrusts ruptured to the surface in the late Holocene. Ages from offset soils in trenches across the fault scarps and from abruptly raised shorelines indicate that the splay, roof, and floor thrusts of the Seattle and Tacoma faults ruptured about 1100 years ago.

Washington↗