Geology Reports⌕ Search

Geology topics

R.W. Jibson

Publications and source records attributed to R.W. Jibson.

At least 19 recordsLinked to original sources
USGS2011

Methods for assessing the stability of slopes during earthquakes-A retrospective

During the twentieth century, several methods to assess the stability of slopes during earthquakes were developed. Pseudostatic analysis was the earliest method; it involved simply adding a permanent body force representing the earthquake shaking to a static limit-equilibrium analysis. Stress-deformation analysis, a later development, involved much more complex modeling of slopes using a mesh in which the internal stresses and strains within elements are computed based on the applied external loads, including gravity and seismic loads. Stress-deformation analysis provided the most realistic model of slope behavior, but it is very complex and requires a high density of high-quality soil-property data as well as an accurate model of soil behavior. In 1965, Newmark developed a method that effectively bridges the gap between these two types of analysis. His sliding-block model is easy to apply and provides a useful index of co-seismic slope performance. Subsequent modifications to sliding-block analysis have made it applicable to a wider range of landslide types. Sliding-block analysis provides perhaps the greatest utility of all the types of analysis. It is far easier to apply than stress-deformation analysis, and it yields much more useful information than does pseudostatic analysis.

Engineering Geology↗
USGS2008

The role of shear and tensile failure in dynamically triggered landslides

Dynamic stresses generated by earthquakes can trigger landslides. Current methods of landslide analysis such as pseudo-static analysis and Newmark's method focus on the effects of earthquake accelerations on the landslide mass to characterize dynamic landslide behaviour. One limitation of these methods is their use Mohr-Coulomb failure criteria, which only accounts for shear failure, but the role of tensile failure is not accounted for. We develop a limit-equilibrium model to investigate the dynamic stresses generated by a given ground motion due to a plane wave and use this model to assess the role of shear and tensile failure in the initiation of slope instability. We do so by incorporating a modified Griffith failure envelope, which combines shear and tensile failure into a single criterion. Tests of dynamic stresses in both homogeneous and layered slopes demonstrate that two modes of failure exist, tensile failure in the uppermost meters of a slope and shear failure at greater depth. Further, we derive equations that express the dynamic stress in the near-surface in the acceleration measured at the surface. These equations are used to approximately define the depth range for each mechanism of failure. The depths at which these failure mechanisms occur suggest that shear and tensile failure might collaborate in generating slope failure. ?? 2007 The Authors Journal compilation ?? 2007 RAS.

Geophysical Journal International↗
USGS2008

Rapid Assessment of earthquake-induced landsliding

The Pacific Northwest in the United States including Seattle, Washington, experienced unusually heavy rainfall in the winters of 1995/1996 and 1996/1997, which caused numerous landslides. Following these two winters, the City of Seattle resolved to reduce future landslide losses within its jurisdiction. By coincidence, in 1997 the U.S. Geological Survey (USGS) began a five-year project designed to increase scientific understanding of all the natural hazards facing the Seattle area, including landslides. This article documents the convergence of the efforts of the City of Seattle, the State of Washington, and the USGS to understand the landslide hazards facing the Seattle area and to implement hazard reduction and mitigation of damage from landslides. Specifically, this article identifies how and where USGS information on landslide hazards fit in with efforts already undertaken by the City. This combined effort enabled the City of Seattle to understand its landslide hazards, to formulate public policy, to educate its citizens, and to coordinate the activities of the numerous departments under its jurisdiction with the ultimate goal of lessening the impact of landslides. The City used USGS maps and reports to guide decisions that prioritized funds for siting, maintaining and constructing public facilities in addition to meeting Washington State laws that mandated growth management and environmental review.

Conference Paper↗
USGS2007

Regression models for estimating coseismic landslide displacement

Newmark's sliding-block model is widely used to estimate coseismic slope performance. Early efforts to develop simple regression models to estimate Newmark displacement were based on analysis of the small number of strong-motion records then available. The current availability of a much larger set of strong-motion records dictates that these regression equations be updated. Regression equations were generated using data derived from a collection of 2270 strong-motion records from 30 worldwide earthquakes. The regression equations predict Newmark displacement in terms of (1) critical acceleration ratio, (2) critical acceleration ratio and earthquake magnitude, (3) Arias intensity and critical acceleration, and (4) Arias intensity and critical acceleration ratio. These equations are well constrained and fit the data well (71% < R2 < 88%), but they have standard deviations of about 0.5 log units, such that the range defined by the mean ?? one standard deviation spans about an order of magnitude. These regression models, therefore, are not recommended for use in site-specific design, but rather for regional-scale seismic landslide hazard mapping or for rapid preliminary screening of sites. ?? 2007 Elsevier B.V. All rights reserved.

Engineering Geology↗
USGS2006

Large rock avalanches triggered by the M 7.9 Denali Fault, Alaska, earthquake of 3 November 2002

The moment magnitude (M) 7.9 Denali Fault, Alaska, earthquake of 3 November 2002 triggered thousands of landslides, primarily rock falls and rock slides, that ranged in volume from rock falls of a few cubic meters to rock avalanches having volumes as great as 20 ?? 106 m3. The pattern of landsliding was unusual: the number and concentration of triggered slides was much less than expected for an earthquake of this magnitude, and the landslides were concentrated in a narrow zone about 30-km wide that straddled the fault-rupture zone over its entire 300-km length. Despite the overall sparse landslide concentration, the earthquake triggered several large rock avalanches that clustered along the western third of the rupture zone where acceleration levels and ground-shaking frequencies are thought to have been the highest. Inferences about near-field strong-shaking characteristics drawn from interpretation of the landslide distribution are strikingly consistent with results of recent inversion modeling that indicate that high-frequency energy generation was greatest in the western part of the fault-rupture zone and decreased markedly to the east. ?? 2005 Elsevier B.V. All rights reserved.

Engineering Geology↗
USGS2005

Seismically induced rock slope failures resulting from topographic amplification of strong ground motions: The case of Pacoima Canyon, California

The 1994 Northridge earthquake (Mw = 6.7) triggered extensive rock slope failures in Pacoima Canyon, immediately north of Los Angeles, California. Pacoima Canyon is a narrow and steep canyon incised in gneissic and granitic rocks. Peak accelerations of nearly 1.6 g were recorded at a ridge that forms the left abutment of Pacoima Dam; peak accelerations at the bottom of the canyon were less than 0.5 g, suggesting the occurrence of topographic amplification. Topographic effects have been previously suggested to explain similarly high ground motions at the site during the 1971 (Mw = 6.7) San Fernando earthquake. Furthermore, high landslide concentrations observed in the area have been attributed to unusually strong ground motions rather than higher susceptibility to sliding compared with nearby zones. We conducted field investigations and slope stability back-analyses to confirm the impact of topographic amplification on the triggering of landslides during the 1994 earthquake. Our results suggest that the observed extensive rock sliding and falling would have not been possible under unamplified seismic conditions, which would have generated a significantly lower number of areas affected by landslides. In contrast, modelling slope stability using amplified ground shaking predicts slope failure distributions matching what occurred in 1994. This observation confirms a significant role for topographic amplification on the triggering of landslides at the site, and emphasises the need to select carefully the inputs for seismic slope stability analyses. ?? 2005 Elsevier B.V. All rights reserved.

Engineering Geology↗
USGS2004

Landslides triggered by the 2002 Denali fault, Alaska, earthquake and the inferred nature of the strong shaking

The 2002 M7.9 Denali fault, Alaska, earthquake triggered thousands of landslides, primarily rock falls and rock slides, that ranged in volume from rock falls of a few cubic meters to rock avalanches having volumes as great as 15 ?? 106 m3. The pattern of landsliding was unusual; the number of slides was less than expected for an earthquake of this magnitude, and the landslides were concentrated in a narrow zone 30-km wide that straddled the fault rupture over its entire 300-km length. The large rock avalanches all clustered along the western third of the rupture zone where acceleration levels and ground-shaking frequencies are thought to have been the highest. Inferences about near-field strong shaking characteristics drawn from the interpretation of the landslide distribution are consistent with results of recent inversion modeling that indicate high-frequency energy generation was greatest in the western part of the fault rupture zone and decreased markedly to the east. ?? 2004, Earthquake Engineering Research Institute.

Earthquake Spectra↗
USGS2003

The 2002 Denali fault earthquake, Alaska: A large magnitude, slip-partitioned event

The MW (moment magnitude) 7.9 Denali fault earthquake on 3 November 2002 was associated with 340 kilometers of surface rupture and was the largest strike-slip earthquake in North America in almost 150 years. It illuminates earthquake mechanics and hazards of large strike-slip faults. It began with thrusting on the previously unrecognized Susitna Glacier fault, continued with right-slip on the Denali fault, then took a right step and continued with right-slip on the Totschunda fault. There is good correlation between geologically observed and geophysically inferred moment release. The earthquake produced unusually strong distal effects in the rupture propagation direction, including triggered seismicity.

Science↗
USGS2003

Landslides and liquefaction triggered by the M 7.9 denali fault earthquake of 3 November 2002

The moment magnitude (M) 7.9 Denali Fault earthquake in Alaska of 3 November 2002 triggered an unusual pattern of landslides and liquefaction effects. The landslides were primarily rock falls and rock slides that ranged in volume from a few cubic meters to the 40 million-cubic-meter rock avalanche that covered much of the McGinnis Glacier. Landslides were concentrated in a narrow zone ???30 km wide that straddled the fault rupture zone over its entire 300 km length. Large rock avalanches all clustered at the western end of the rupture zone where acceleration levels are reported to have been the highest. Liquefaction effects, consisting of sand blows, lateral spreads, and settlement, were widespread within susceptible alluvial deposits extending from Fairbanks eastward several hundred kilometers. The liquefaction effects displayed a pattern of increasing concentration and severity from west to east and extended well beyond the zone of landslides, which is unusual. The contrasting patterns formed by the distributions of landslides and liquefaction effects initially seemed to be inconsistent; however, preliminary analyses of strong-motion records from the earthquake offer a possible explanation for the unusual ground-failure patterns that are related to three subevents that have been discerned from the earthquake records.

GSA Today↗
USGS2002

A public health issue related to collateral seismic hazards: The valley fever outbreak triggered by the 1994 Northridge, California earthquake

Following the 17 January 1994 Northridge. California earthquake (M = 6.7), Ventura County, California, experienced a major outbreak of coccidioidomycosis (CM), commonly known as valley fever, a respiratory disease contracted by inhaling airborne fungal spores. In the 8 weeks following the earthquake (24 January through 15 March), 203 outbreak-associated cases were reported, which is about an order of magnitude more than the expected number of cases, and three of these cases were fatal. Simi Valley, in easternmost Ventura County, had the highest attack rate in the county, and the attack rate decreased westward across the county. The temporal and spatial distribution of CM cases indicates that the outbreak resulted from inhalation of spore-contaminated dust generated by earthquake-triggered landslides. Canyons North East of Simi Valley produced many highly disrupted, dust-generating landslides during the earthquake and its aftershocks. Winds after the earthquake were from the North East, which transported dust into Simi Valley and beyond to communities to the West. The three fatalities from the CM epidemic accounted for 4 percent of the total earthquake-related fatalities.

Surveys in Geophysics↗
USGS2001

Influence of surface-normal ground acceleration on the initiation of the Jih-Feng-Erh-Shan landslide during the 1999 Chi-Chi, Taiwan, earthquake

The 1999 Chi-Chi, Taiwan, earthquake triggered numerous landslides throughout a large area in the Central Range, to the east, southeast, and south of the fault rupture. Among them are two large rock avalanches, at Tsaoling and at Jih-Feng-Erh-Shan. At Jih-Feng-Erh-Shan, the entire thickness (30-50 m) of the Miocene Changhukeng Shale over an area of 1 km2 slid down its bedding plane for a distance of about 1 km. Initial movement of the landslide was nearly purely translational. We investigate the effect of surface-normal acceleration on the initiation of the Jih-Feng-Erh-Shan landslide using a block slide model. We show that this acceleration, currently not considered by dynamic slope-stability analysis methods, significantly influences the initiation of the landslide.

Bulletin of the Seismological Society of America↗
USGS2000

A method for producing digital probabilistic seismic landslide hazard maps

The 1994 Northridge, California, earthquake is the first earthquake for which we have all of the data sets needed to conduct a rigorous regional analysis of seismic slope instability. These data sets include: (1) a comprehensive inventory of triggered landslides, (2) about 200 strong-motion records of the mainshock, (3) 1:24 000-scale geologic mapping of the region, (4) extensive data on engineering properties of geologic units, and (5) high-resolution digital elevation models of the topography. All of these data sets have been digitized and rasterized at 10 m grid spacing using ARC/INFO GIS software on a UNIX computer. Combining these data sets in a dynamic model based on Newmark's permanent-deformation (sliding-block) analysis yields estimates of coseismic landslide displacement in each grid cell from the Northridge earthquake. The modeled displacements are then compared with the digital inventory of landslides triggered by the Northridge earthquake to construct a probability curve relating predicted displacement to probability of failure. This probability function can be applied to predict and map the spatial variability in failure probability in any ground-shaking conditions of interest. We anticipate that this mapping procedure will be used to construct seismic landslide hazard maps that will assist in emergency preparedness planning and in making rational decisions regarding development and construction in areas susceptible to seismic slope failure. ?? 2000 Elsevier Science B.V. All rights reserved.

Engineering Geology↗
USGS1999

Assessment of landslide hazards in Kaluanui and Maakua gulches, Oahu, Hawaii, following the 9 May 1999 Sacred Falls landslide

One of the injured hikers later died of injuries received in the landslide. Governor Ben Cayetano of Hawaii ordered that the park be closed due to concern about continuing landslide hazard near the falls. Subsequently, Bill Meyer, District Chief for the U.S. Geological Survey (USGS) Water Resources Division in Honolulu contacted Tim Johns, Chair of the Board of Land and Natural Resources of the Hawaii Department of Land and Natural Resources (DLNR) and offered assistance in assessing slope stability in the park. Mr. Johns accepted the offer, and two landslide specialists from the USGS Geologic Hazards Team in Golden Colorado were sent to the site. On Friday, 14 May 1999, we visited the Sacred Falls landslide site with Glenn Bauer, Ed Sakoda, and Gary Moniz of DLNR. The ground investigation involved inspecting the impact area, estimating the volume of the deposit, and gathering data to help reconstruct the event. On Monday, 17 May 1999, we conducted an aerial reconnaissance of Kaluanui Gulch (Sacred Falls State Park) and Maakua Gulch in a commercial helicopter provided by DLNR. We inspected the source and path of movement of the Sacred Falls landslide of 9 May and reconnoitered the full length of both valleys to get an overview of ongoing landslide hazards there. This report gives our observations and conclusions about the Sacred Falls landslide, broadly assesses the ongoing hazard in the Kaluanui and Maakua Gulches, and suggests methods for more detailed assessment of landslide hazards here and along other trails in state parks on Oahu. Observations and conclusions in this report are based on a very brief investigation and thus are preliminary in nature.

Hawaii↗
USGS1997

A coccidioidomycosis outbreak following the Northridge, Calif, earthquake

Objective. —To describe a coccidioidomycosis outbreak in Ventura County following the January 1994 earthquake, centered in Northridge, Calif, and to identify factors that increased the risk for acquiring acute coccidioidomycosis infection. Design. —Epidemic investigation, population-based skin test survey, and casecontrol study. Setting. —Ventura County, California. Results. —In Ventura County, between January 24 and March 15, 1994, 203 outbreak-associated coccidioidomycosis cases, including 3 fatalities, were identified (attack rate [AR], 30 cases per 100 000 population). The majority of cases (56%) and the highest AR (114 per 100 000 population) occurred in the town of Simi Valley, a community located at the base of a mountain range that experienced numarous landslides associated with the earthquake. Disease onset for cases peaked 2 weeks after the earthquake. The AR was 2.8 times greater for persons 40 years of age and older than for younger persons (relative risk, 2.8; 95% confidence interval [CI], 2.1-3.7; P <.001). Environmental data indicated that large dust clouds, generated by landslides following the earthquake and strong aftershocks in the Santa Susana Mountains north of Simi Valley, were dispersed into nearby valleys by northeast winds. Simi Valley case-control study data indicated that physically being in a dust cloud (odds ratio, 3.0; 95% CI, 1.6-5.4; P<.001) and time spent in a dust cloud ( P <.001) significantly increased the risk for being diagnosed with acute coccidioidomycosis. Conclusions. —Both the location and timing of cases strongly suggest that the coccidioidomycosis outbreak in Ventura County was caused when arthrospores were spread in dust clouds generated by the earthquake. This is the first report of a coccidioidomycosis outbreak following an earthquake. Public and physician awareness, especially in endemic areas following similar dust cloud-generating events, may result in prevention and early recognition of acute coccidioidomycosis.

Journal of the American Medical Association↗
USGS1996

Landslides triggered by the 1994 Northridge, California, earthquake

The 17 January 1994 Northridge, California, earthquake ( M w = 6.7) triggered more than 11,000 landslides over an area of about 10,000 km 2 . Most of the landslides were concentrated in a 1000-km 2 area that included the Santa Susana Mountains and the mountains north of the Santa Clara River valley. We mapped landslides triggered by the earthquake in the field and from 1:60,000-nominal-scale aerial photography provided by the U.S. Air Force and taken the morning of the earthquake; these mapped landslides were subsequently digitized and plotted in a GIS-based format. Most of the triggered landslides were shallow (1- to 5-m thick), highly disrupted falls and slides within weakly cemented Tertiary to Pleistocene clastic sediment. Average volumes of these types of landslides were less than 1000 m 3 , but many had volumes exceeding 100,000 m 3 . The larger disrupted slides commonly had runout paths of more than 50 m, and a few traveled as far as 200 m from the bases of steep parent slopes. Deeper (>5-m thick) rotational slumps and block slides numbered in the tens to perhaps hundreds, a few of which exceeded 100,000 m 3 in volume. Most of these were reactivations of previously existing landslides. The largest single landslide triggered by the earthquake was a rotational slump/block slide having a volume of 8 × 10 6 m 3 . Analysis of the mapped landslide distribution with respect to variations in (1) landslide susceptibility and (2) strong shaking recorded by hundreds of instruments will form the basis of a seismic landslide hazard analysis of the Los Angeles area.

California↗
USGS1996

Use of landslides for paleoseismic analysis

In many environments, landslides preserved in the geologic record can be analyzed to determine the likelihood of seismic triggering. If evidence indicates that a seismic origin is likely for a landslide or group of landslides, and if the landslides can be dated, then a paleo-earthquake can be inferred, and some of its characteristics can be estimated. Such paleoseismic landslide studies thus can help reconstruct the seismic history of a site or region. In regions that contain multiple seismic sources and in regions where surface faulting is absent, paleoseismic ground-failure studies are valuable tools in hazard and risk studies that are more concerned with shaking hazards than with interpretation of the movement histories of individual faults. Paleoseismic landslide analysis involves three steps: (1) identifying a feature as a landslide, (2) dating the landslide, and (3) showing that the landslide was triggered by earthquake shaking. This paper addresses each of these steps and discusses methods for interpreting the results of such studies by reviewing the current state of knowledge of paleoseismic landslide analysis.

Engineering Geology↗