Geology Reports⌕ Search

Geology topics

R.E. Wells

Publications and source records attributed to R.E. Wells.

34 records · Page 2Linked to original sources
USGS2002

Location, structure, and seismicity of the Seattle fault zone, Washington: Evidence from aeromagnetic anomalies, geologic mapping, and seismic-reflection data

A high-resolution aeromagnetic survey of the Puget Lowland shows details of the Seattle fault zone, an active but largely concealed east-trending zone of reverse faulting at the southern margin of the Seattle basin. Three elongate, east-trending magnetic anomalies are associated with north-dipping Tertiary strata exposed in the hanging wall; the magnetic anomalies indicate where these strata continue beneath glacial deposits. The northernmost anomaly, a narrow, elongate magnetic high, precisely correlates with magnetic Miocene volcanic conglomerate. The middle anomaly, a broad magnetic low, correlates with thick, nonmagnetic Eocene and Oligocene marine and fluvial strata. The southern anomaly, a broad, complex magnetic high, correlates with Eocene volcanic and sedimentary rocks. This tripartite package of anomalies is especially clear over Bainbridge Island west of Seattle and over the region east of Lake Washington. Although attenuated in the intervening region, the pattern can be correlated with the mapped strike of beds following a northwest-striking anticline beneath Seattle. The aeromagnetic and geologic data define three main strands of the Seattle fault zone identified in marine seismic-reflection profiles to be subparallel to mapped bedrock trends over a distance of >50 km. The locus of faulting coincides with a diffuse zone of shallow crustal seismicity and the region of uplift produced by the M 7 Seattle earthquake of A.D. 900-930.

Washington↗
USGS2001

Upper crustal structure in Puget Lowland, Washington: Results from the 1998 Seismic Hazards Investigation in Puget Sound

A new three-dimensional (3-D) model shows seismic velocities beneath the Puget Lowland to a depth of 11 km. The model is based on a tomographic inversion of nearly one million first-arrival travel times recorded during the 1998 Seismic Hazards Investigation in Puget Sound (SHIPS), allowing higher-resolution mapping of subsurface structures than previously possible. The model allows us to refine the subsurface geometry of previously proposed faults (e.g., Seattle, Hood Canal, southern Whidbey Island, and Devils Mountain fault zones) as well as to identify structures (Tacoma, Lofall, and Sequim fault zones) that warrant additional study. The largest and most important of these newly identified structures lies along the northern boundary of the Tacoma basin; we informally refer to this structure here as the Tacoma fault zone. Although tomography cannot provide information on the recency of motion on any structure, Holocene earthquake activity on the Tacoma fault zone is suggested by seismicity along it and paleoseismic evidence for abrupt uplift of tidal marsh deposits to its north. The tomography reveals four large, west to northwest trending low-velocity basins (Tacoma, Seattle, Everett, and Port Townsend) separated by regions of higher velocity ridges that are coincident with fault-bounded uplifts of Eocene Crescent Formation basalt and pre-Tertiary basement. The shapes of the basins and uplifts are similar to those observed in gravity data; gravity anomalies calculated from the 3-D tomography model are in close agreement with the observed anomalies. In velocity cross sections the Tacoma and Seattle basins are asymmetric: the basin floor dips gently toward a steep boundary with the adjacent high-velocity uplift, locally with a velocity "overhang" that suggests a basin vergent thrust fault boundary. Crustal fault zones grow from minor folds into much larger structures along strike. Inferred structural relief across the Tacoma fault zone increases by several kilometers westward along the fault zone to Lynch Cove, where we interpret it as a zone of south vergent faulting overthrusting Tacoma basin. In contrast, structural relief along the Seattle fault zone decreases west of Seattle, which we interpret as evidence that the N-S directed compression is being accommodated by slip transfer between the Seattle and Tacoma fault zones. Together, the Tacoma and Seattle fault zones raise the Seattle uplift, one of a series of east-west trending, pop-up structures underlying Puget Lowland from the Black Hills to the San Juan Islands.

Washington↗
USGS1999

Three-dimensional velocity structure of Siletzia and other accreted terranes in the Cascadia forearc of Washington

Eocene mafic crust with high seismic velocities underlies much of the Oregon and Washington forearc and acts as a backstop for accretion of marine sedimentary rocks from the obliquely subducting Juan de Fuca slab. Arc-parallel migration of relatively strong blocks of this terrane, known as Siletzia, focuses upper crustal deformation along block boundaries, which are potential sources of earthquakes. In a three-dimensional velocity model of coastal Washington, we have combined surface geology, well data, and travel times from earthquakes and controlled source seismic experiments to resolve the major boundaries of the Siletz terrane with the adjacent accreted sedimentary prism and volcanic arc. In southern Washington and northern Oregon the Siletz terrane appears to be a thick block (???20 km) that extends west of the coastline and makes a high-angle contact with the offshore accreted sedimentary prism. On its east flank the high-velocity Siletz terrane boundary coincides with an en echelon zone of seismicity in the arc. In northern Washington the western edge of Siletzia makes a lower-angled, fault-bound contact with the accretionary prism. In addition, alternating, east-west trending uplifts and downwarps of the Siletz terrane centered on the antiformal Olympic Mountains may reflect focusing of north-south compression in the northern part of the Siletz terrane. This compressional strain may result from northward transport and clockwise rotation of the Siletz terrane into the relatively fixed Canadian Coast Mountains restraining bend along the coast.

Oregon, Washington↗
USGS1999

Geologic processes of accretion in the Cascadia subduction zone west of Washington State

The continental margin west of Oregon and Washington undergoes a northward transition in morphology, from a relatively narrow, steep slope west of Oregon to a broad, midslope terrace off Washington. Multichannel seismic (MCS) reflection data collected over the accretionary complex show that the morphologic transition is accompanied by significant change in accretionary style: West of Oregon the direction of thrust vergence in the wedge toe flip-flops between landward and seaward, whereas off Washington, thrust faults in the toe verge consistently landward, except near the mouth of the Columbia River where detachment folding of accreted sediment is evident. Furthermore, rocks under the broad midslope terrace west of Washington appear to be intruded by diapirs. The combination of detachment folding, diapirs, and landward-vergent thrust faults all suggest that nearly as far landward as the shelf break, coupling along the interplate decollement is, or has been, low, as suggested by other lines of evidence.

Journal of Geodynamics↗
USGS1998

A new view into the Cascadia subduction zone and volcanic arc: Implications for earthquake hazards along the Washington margin

In light of suggestions that the Cascadia subduction margin may pose a significant seismic hazard for the highly populated Pacific Northwest region of the United States, the U.S. Geological Survey (USGS), the Research Center for Marine Geosciences (GEOMAR), and university collaborators collected and interpreted a 530-km-long wide-angle onshore-offshore seismic transect across the subduction zone and volcanic arc to study the major structures that contribute to seismogenic deformation. We observed (1) an increase in the dip of the Juan de Fuca slab from 2°–7° to 12° where it encounters a 20-km-thick block of the Siletz terrane or other accreted oceanic crust, (2) a distinct transition from Siletz crust into Cascade arc crust that coincides with the Mount St. Helens seismic zone, supporting the idea that the mafic Siletz block focuses seismic deformation at its edges, and (3) a crustal root (35–45 km deep) beneath the Cascade Range, with thinner crust (30–35 km) east of the volcanic arc beneath the Columbia Plateau flood basalt province. From the measured crustal structure and subduction geometry, we identify two zones that may concentrate future seismic activity: (1) a broad (because of the shallow dip), possibly locked part of the interplate contact that extends from ∼25 km depth beneath the coastline to perhaps as far west as the deformation front ∼120 km offshore and (2) a crustal zone at the eastern boundary between the Siletz terrane and the Cascade Range.

Geology↗
USGS1998

Fore-arc migration in Cascadia and its neotectonic significance

Neogene deformation, paleomagnetic rotations, and sparse geodetic data suggest the Cascadia fore arc is migrating northward along the coast and breaking up into large rotating blocks. Deformation occurs mostly around the margins of a large, relatively aseismic Oregon coastal block composed of thick, accreted seamount crust. This 400-km-long block is moving slowly clockwise with respect to North America about a Euler pole in eastern Washington, thus increasing convergence rates along its leading edge near Cape Blanco, and creating an extensional volcanic arc on its trailing edge. Northward movement of the block breaks western Washington into smaller, seismically active blocks and compresses them against the Canadian Coast Mountains restraining bend. Arc-parallel transport of fore-arc blocks is calculated to be up to 9 mm/yr, sufficient to produce damaging earthquakes in a broad deformation zone along block margins.

Geology↗
USGS1997

Gravity anomalies, Quaternary vents, and Quaternary faults in the southern Cascade Range, Oregon and California: Implications for arc and backarc evolution

Isostatic residual gravity anomalies in the southern Cascade Range of northern California and southern Oregon are spatially correlated with broad zones of Quaternary magmatism as reflected by the total volume of Quaternary volcanic products, the distribution of Quaternary vents, and the anomalously low teleseismic P wave velocities in the upper 30 km of crust. The orientation of Quaternary faults also appears to be related to gravity anomalies and volcanism in this area, trending generally north-south within the magmatic regions and northwest-southeast as they enter the neighboring amagmatic zones to the north and south. The relationship between gravity anomalies, vent density, and fault orientations may indicate in a broad sense the strength of the middle and upper crust. The southern Cascade Range occupies a transition zone where horizontal stress is transferred from the northwest-southeast dextral shear of the Walker Lane belt to the east-west extension characteristic of the Cascade arc in central Oregon. Faulting along north-south strikes in the volcanically active areas indicates the east-west extensional stresses in thermally weakened crust, whereas northwest faulting between the volcanically active areas reflects the northwest trending, right lateral shear strain of the Walker Lane belt. The segmentation of the arc reflected in Quaternary magmatism may be caused by differential extension behind crustal blocks of the forearc rotating clockwise with respect to North America. In this view the volcanic centers at Mount Shasta, Medicine Lake volcano, and Lassen Peak in northern California are situated along the southern parts of the trailing edges of two distinct segments of the forearc where additional extension is implied by their differential clockwise rotation.

Journal of Geophysical Research B: Solid Earth↗
USGS1995

Tectonic setting of the Portland-Vancouver area, Oregon and Washington: Constraints from low-altitude aeromagnetic data

Seismic activity in the Portland-Vancouver metropolitan area may be associated with various mapped faults that locally offset volcanic basement of Eocene age and younger. This volcanic basement is concealed in most places by young deposits, vegetation, and urban development. The U.S. Geological Survey conducted an aeromagnetic survey in September 1992 to investigate the extent of these mapped faults and possibly to help identify other seismic and volcanic hazards in the area. The survey was flown approximately 240 m above terrain, along flight lines spaced 460 m apart, and over an area about 50 × 50 km. These magnetic data indicate a pronounced northwest-striking magnetic lineation east of the Willamette River in downtown Portland associated with a fault concealed beneath Quaternary sedimentary deposits and previously inferred from shallow well data. The magnetic lineation confirms the existence of the fault and suggests that it has had a prolonged history: (1) Although well data indicate <200 m of vertical offset of underlying volcanic basement, models based on the aeromagnetic data from downtown Portland suggest reverse faulting with up to 1 km of offset deeper in the section. (2) The magnetic lineation associated with this fault extends southeast to the Clackamas River drainage, a distance of 50 km and considerably beyond the mapped extent of the fault. A northwest-striking magnetic anomaly located southwest of the Tualatin Mountains corresponds closely with another mapped fault and with mixed reverse and strike-slip faulting during a seismic swarm (M ≤ 3) in 1991. We believe these and other anomalies in the aeromagnetic data reflect the Portland Hills fault zone, believed to be the southwestern boundary of a structural basin now occupied by Portland and Vancouver. The postulated northeastern boundary of the basin, the Frontal fault zone, is also evident, although less well represented in the aeromagnetic data. Aeromagnetic anomalies, geologic mapping, and earthquake focal-plane solutions demonstrate a complex deformational history in the Portland-Vancouver area since middle Miocene time that includes elements of compression, extension, and dextral slip. These complexities reflect Portland-Vancouver's unique position within a north-south transition in tectonic styles along the Cascadia margin, from compressional in the north to extensional in the south.

Oregon, Washington↗
USGS1989

Origin of the oceanic basalt basement of the Solomon Islands arc and its relationship to the Ontong Java Plateau-insights from Cenozoic plate motion models

Cenozoic global plate motion models based on a hotspot reference frame may provide a useful framework for analyzing the tectonic evolution of the Solomon Islands convergent margin. A postulated late Miocene collision of the Ontong Java Plateau (OJP) with a NE-facing arc is consistent with the predicted path of the OJP across the Pacific Basin and its Miocene arrival at the trench. Late-stage igneous activity (65-30 Ma) predicted for the OJP as it rode over the Samoan hotspot occurred in correlative stratigraphic sections on Malaita, the supposed accreted flake of OJP in the Solomon Islands arc. Convergence similar to the present velocities between Australia and the Pacific plates was characteristic of the last 43 million years. Prior to 43 Ma Pacific-Australia plate motions were divergent, seemingly at odds with geologic evidence for early Tertiary convergence, particularly in Papua New Guinea. A postulated South Pacific plate may have existed between Australia and the Pacific plate and would have allowed implied northward subduction along the northeastern Australia plate boundary that lasted into the early Eocene. Subsequent reorganization of plate motions in the middle Eocene correlates with middle Eocene marginal basin formation along ridges oblique to the main plate boundary. Cessation of spreading on the Pacific-South Pacific Ridge and its subsequent subduction beneath Asia followed the change in Pacific plate motion at 43 Ma. A trapped remnant of the extinct, NW-trending ridge may still lie beneath the western Philippine Sea. The terminal deformation, metamorphism and ophiolite obduction in the Eocene orogen of the southwest Pacific also correlates with the major change in Pacific plate motion at 43 Ma and the subsequent compression of the dying Eocene arc against outlying continental and oceanic crustal blocks of the Australian plate. The Solomon Islands oceanic basement may represent juxtaposition of oceanic plateaus of the Australian plate beneath overthrust, dismembered ophiolite derived from adjacent marginal basin crust.

Tectonophysics↗
USGS1989

Geologic map of the Cape Disappointment-Naselle River area, Pacific and Wahkiakum counties, Washington

The Cape Disappointment-Naselle River area is in southwestern Washington at the mouth of the Columbia River. The area encompasses several major estuaries and their adjacent highlands, which reach elevations of about 2,000 feet. Rainfall is abundant and produces heavy vegetation and deep weathering of the bedrock. Natural bedrock exposures are restricted to stream courses along larger drainages, although a network of logging roads provides excellent access to most of the area and widespread, but somewhat ephemeral, exposures of bedrock.

Washington↗