Initial results of a 2D burial/thermal history model, central Appalachian basin, Ohio and West Virginia
Explore the source record for details and available documents.
Geology topics
Publications and source records attributed to R. T. Ryder.
Explore the source record for details and available documents.
The US Geological Survey (USGS) periodically conducts subjective probabilistic assessments of the technically recoverable undiscovered hydrocarbon resources of the US and of the world. In addition, the USGS prepares forecasts of that portion of the technically recoverable resources that may be economic under specified conditions of supply, demand, and price. Depending on priorities, regional hydrocarbon assessments of the US are revised every 5 to 10 years. These assessments of undiscovered hydrocarbons supplement the data on hydrocarbon reserves that are reported annually by the US Department of Energy, Energy Information Administration. In between assessments, USGS assessment geologists conduct research and compile geologic and production data that may be used to improve future assessments. This new information commonly effects changes in the way the USGS defines "plays" or "assessment units" from assessment to assessment. Furthermore, USGS assessment methodology is in a constant state of evolution and changes to some degree from assessment to assessment.
Explore the source record for details and available documents.
New conodont alteration index (CAI) and vitrinite reflectance (%Ro) data collected from drill holes in the Appalachian basin of New York State allow refinement of thermal maturity maps for Ordovician and Devonian rocks. CAI isotherms on the new maps show a pattern that approximates that published by Harris et al. (1978) in eastern and western New York, but it differs in central New York, where the isotherms are shifted markedly westward by more than 100 km and are more tightly grouped. This close grouping of isograds reflects a steeper thermal gradient than previously noted by Harris et al. (1978) and agrees closely with the abrupt west-to-east increase in thermal maturity across New York noted by Johnsson (1986). These data show, in concordance with previous studies, that thermal maturity levels in these rocks are higher than can be explained by simple burial heating beneath the present thickness of overburden. The Ordovician and Devonian rocks of the Appalachian Basin in New York must have been buried by very thick post-Devonian sediments (4-6 km suggested by Sarwar and Friedman 1995) or were exposed to a higher-than-normal geothermal flux caused by crustal extension, or a combination of the two.
Environmental samples collected in the Mosquito Creek Lake area were used to characterize water quality in relation to the chemistry of locally occurring oil, natural gas, and brine and to establish baseline water quality. Mosquito Creek Lake (a manmade reservoir) and the shallow bedrock aquifers near the lake are major sources of potable water in central Trumbull County. The city of Warren relies on the lake as a sole source of potable water. Some of the lake bottom may be in direct hydraulic connection with the underlying aquifers. The city of Cortland, along the southeastern shore of the lake, relies on the Cussewago Sandstone aquifer as a sole source of potable water. This aquifer subcrops beneath the glacio-fluvial sediments that underlie the lake. Nearly all residential homes around the lake, with the exception of homes in the city of Cortland, rely on domestic supply wells as a source of potable water. Oil and natural gas exploration and production have been ongoing in the Mosquito Creek Lakearea since the discovery of the historic Mecca Oil Pool in the Mississippian Berea and Cussewago Sandstones in 1860. Since the late 1970' s, the major drilling objective and zone of production is the Lower Silurian Clinton sandstone. The oil and natural gas resources of the Mosquito Creek Lake area, including reservoir pressure, production history, and engineering and abandonment practices are described in this report. The chemical and isotopic characteristics of the historic Mecca oil and natural gas are very different than those of the Clinton sandstone oil and natural gas. Gas chromatograms show that Mecca oil samples are extensively altered by biodegradation, whereas Clinton sandstone oils are not. Extensive alteration of Mecca oil is consistent with their occurrence at very shallow depths (less than 100 ft below land surface) where microbial activity can affect their composition. Also, the carbon-isotope composition of dissolved methane gas from Berea and Cussewago Sandstone water samples indicates that the gas is microbially generated, whereas the Clinton sandstone gases are thermogenically generated. Methane gas, in addition to crude oil, occurs naturally in the shallow Berea and Cussewago Sandstone aquifers in the Mosquito Creek Lake area and concentrations of dissolved methane are significant in the city of Cortland public-supply wells and in the domestic-supply wells near the southern shore of the lake. Water associated with oil and gas in the Clinton sandstone is a brine with high concentrations of chloride. Water from the Berea and Cussewago Sandstones, however, is fresh and potable. The contrasting geochemical characteristics are important for addressing water-quality issues that relate to oil and natural gas development in the Mosquito Creek area. A reexamination of the geologic framework and results of a subsurface-gas survey show that crude oil in the historic Mecca Oil Pool probably does not seep into Mosquito Creek Lake. Environmental samples show no evidence of any measurable release of oil, gas, or brine from the deeper Clinton sandstone oil and gas wells to the shallow aquifers, the lake, or lake tributaries. Brine is not associated with the hydrocarbons in the shallow Berea-Cussewago aquifer system and therefore cannot be a source of brine contamination. A mixing diagram constructed for dissolved bromide and chloride in surface water and water-supply wells shows no demonstrable mixing of these water resources with brine from the Clinton sandstone. There is some notable salinity in surface waters; however, the water is bromide poor, and a mixing diagram indicates that some local ground waters are influenced by halite solutions, presumably derived from leaching of road salt or from septic effluent.
This Digital Data Series publication contains both raw and processed seismic data recorded during the period 1975 through 1978 by several geophysical service companies under contract to the USGS in the following study areas of the Powder River Basin, Montana and Wyoming: 1. Powder River and Custer Counties, MT (T. 1 S., T. 1-2 N., R. 53-54 E.) 2. Carter County, MT (T. 57-58 N., R. 65 W.) and Crook County, WY (T. 9 S., R.57-58 E.) 3. Powder River and Carter Counties, MT (T. 8 S., R. 53-55 E.) 4. Niobrara County, WY (T. 36-38 N., R. 61-62 W.) and Weston County, WY (T. 45 N., R. 61 W.) Four multichannel Vibroseis seismic lines, six Vertical Seismic Profiles (VSP's), and associated support material (observer's notes, X-Y coordinates, elevations of source and receivers, for example) are included. The raw (unprocessed) field data and a processed version of each surface profile and VSP are contained in standard SEG-Y format files; support material are in ASCII format text files. The processed surface data are versions which were reprocessed by the USGS in 1995 using state-of-the-art seismic data processing software.
Explore the source record for details and available documents.
No abstract available.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Several new discoveries of oil production in the Leo sandstone, an economic unit in the Pennsylvanian middle member of the Minnelusa formation, eastern Powder River basin, Wyoming-Nebraska-South Dakota, have renewed exploration interest in this area. Vertical seismic profiles (VSP) and model studies suggested that a measurable seismic amplitude anomaly is frequently associated with the thick First Leo sandstone lenses. To test this concept, a surface reflection seismic profile was run between two wells about 12 miles apart. The First Leo was present and productive in one well and thin and barren in the other. The surface profile shows the predicted amplitude anomaly at the well where a thick lens is known to exist. Two other First Leo amplitude anomalies also appear on the surface seismic profile between the two wells, which may indicate the presence of additional lenses.