Geology ReportsSearch

Geology topics

R. G. Tysdal

Publications and source records attributed to R. G. Tysdal.

At least 19 recordsLinked to original sources

Stratigraphy and structural setting of Upper Cretaceous Frontier Formation, western Centennial Mountains, southwestern Montana and southeastern Idaho

Stratigraphic, sedimentologic, and palynologic data were used to correlate the Frontier Formation of the western Centennial Mountains with time-equivalent rocks in the Lima Peaks area and other nearby areas in southwestern Montana. The stratigraphic interval studied is in the middle and upper parts (but not uppermost) of the formation based on a comparison of sandstone petrography, palynologic age data, and our interpretation of the structure using a seismic line along the frontal zone of the Centennial Mountains and the adjacent Centennial Valley. The Frontier Formation is comprised of sandstone, siltstone, mudstone, limestone, and silty shale in fluvial and coastal depositional settings. A distinctive characteristic of these strata in the western Centennial Mountains is the absence of conglomerate and conglomeratic sandstone beds. Absence of conglomerate beds may be due to lateral facies changes associated with fluvial systems, a distal fining of grain size, and the absence of both uppermost and lower Frontier rocks in the study area. Palynostratigraphic data indicate a Coniacian age for the Frontier Formation in the western Centennial Mountains. These data are supported by a geochronologic age from the middle part of the Frontier at Lima Peaks indicating a possible late Coniacian-early Santonian age (86.25 ?? 0.38 Ma) for the middle Frontier there. The Frontier Formation in the western Centennial Mountains is comparable in age and thickness to part of the Frontier at Lima Peaks. These rocks represent one of the thickest known sequences of Frontier strata in the Rocky Mountain region. Deposition was from about 95 to 86 Ma (middle Cenomanian to at least early Santonian), during which time, shoreface sandstone of the Telegraph Creek Formation and marine shale of the Cody Shale were deposited to the east in the area now occupied by the Madison Range in southwestern Montana. Frontier strata in the western Centennial Mountains are structurally isolated from other Cretaceous rocks in the region and are part of the Lima thrust sheet that lies at the leading edge of the Sevier-style overthrusting in this part of southwestern Montana and adjacent southeastern Idaho.

Cretaceous Research

Chemical composition of strata of the Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation: Channel-composited and individual rock samples of measured section J and their relationship of measured sections A and B, central part of Rasmussen Ridge, Caribou County, Idaho

This study, one in a series, reports bulk chemical composition of rock samples collected from a core, referred to as Measured Section J, drilled at a site that subsequently was developed into the Enoch Valley phosphate mine in southeastern Idaho. The core is continuous and cuts through the entire thickness of the Meade Peak Phosphatic Shale Member of the Phosphoria Formation. The steeply dipping Meade Peak extends from 182 to 495 feet below the ground surface, which is the greatest below-ground depth of rock that has been sampled to date. The core was drilled before the start of mining, and the rocks consequently have not been exposed to the atmosphere or surficial weathering processes or fractured as a result of mining as are the rocks from other described sections. Hence, this section of the Meade Peak in the core is the least altered section of this member sampled in this series of studies. The channel-sampled rocks from Section J form a set of contiguous intervals across the entire thickness of the Meade Peak. These channel samples characterize?in ascending order?the lower phosphate ore, interlayered middle waste shale, upper phosphate ore, and upper waste shale units of the member. The Section J channel-sample suite includes 3 composite samples of the uppermost 7 feet of the Grandeur Tongue of the Permian Park City Formation, a dolomitic unit that directly underlies the Meade Peak. It also includes an analysis of a 0.1 foot section of chert directly overlying the Meade Peak. The concentrations of the chemical elements in the channel samples are compared with those of Measured Sections Aand B that were obtained from the same mine. In addition to the channel samples, 85 rock samples were selected from the core to address specific geochemical questions that resulted from examination of the core. For example, several of these samples correspond to cored rock that had unusual concentrations of various elements that were determined using a hand-held, x-ray fluorescence instrument. Other individual samples consist of several samples taken within a short interval of the core that leads to an abrupt change in lithology. Overall, the rocks from Measured Section J exhibit the least alteration from interaction with ground water compared with rocks from any of the measured sections that have been described in our previous studies.

Idaho

Stratigraphic section and selected semiquantitative chemistry, Meade Peak phosphatic shale member of Permian Phosphoria Formation, central part of Rasmussen Ridge, Caribou County, Idaho

The U.S. Geological Survey (USGS) has studied the Permian Phosphoria Formation in southeastern Idaho and the entire Western U.S. Phosphate Field throughout much of the twentieth century. In response to a request by the U.S. Bureau of Land Management, a new series of resource, geological, and geoenvironmental studies was undertaken by the USGS in 1998. To accomplish these studies, the USGS has formed cooperative research relationships with two Federal agencies, the Bureau of Land Management and the U.S. Forest Service, tasked with land management and resource conservation on public lands; and with five private companies currently leasing or developing phosphate resources in southeastern Idaho. The companies are Agrium U.S. Inc. (Rasmussen Ridge mine) , Astaris LLC (Dry Valley mine), Rhodia Inc. (Wooley Valley mine, inactive), J.R. Simplot Company (Smoky Canyon mine), and Monsanto Co. (Enoch Valley mine). Some of the mineralogical research associated with this project is supported through a cooperative agreement with the Department of Geology and Geological Enginee ring, University of Idaho. Present studies consist of integrated, multidisciplinary research directed toward (1) resource and reserve estimations of phosphate in selected 7.5-minute quadrangles; (2) elemental residence, mineralogical and petrochemical characteristics; (3) mobilization and reaction pathways, transport, and fate of potentially toxic elements associated with the occurrence, development, and societal use of phosphate; (4) geophysical signatures; and (5) improving the understanding of deposit origin. Because raw data acquired during the project will require time to interpret, the data are released in open-file reports for prompt availability to other workers. Open-file reports associated with this series of studies are submitted to each of the Federal and industry cooperators for comment; however, the USGS is solely responsible for the data contained in the reports.

Idaho

Stratigraphy and depositional environment of nonmarine facies of Frontier Formation, Eastern Pioneer Mountains, southwestern Montana

The Upper Cretaceous Frontier Formation in the eastern Pioneer Mountains of southwestern Montana was deposited in nonmarine environments west of the Western Interior Seaway within the Cordilleran foreland basin. These rocks have been assigned to the Frontier because they contain lithologies typical of the Frontier in the region even though they are entirely nonmarine and are thicker than the correlative marine Frontier to the east. The Frontier in the eastern Pioneer Mountains is underlain by the Vaughn Member of the Blackleaf Formation, but the upper part of the Frontier has been eroded and locally is overlain by rocks of Tertiary age. Geologic mapping was conducted and four sections were measured and described to determine facies, thickness variations, and depositional environments. In the eastern Pioneer Mountains study area, the Frontier ranges in thickness from about 1200 ft (366 m) in the south to more than 3400 ft (1036 m) in the north\. Frontier strata in the study area cannot be readily subdivided into mappable units, but two broadly-defined informal lithic units are described. The lower unit contains yellow-brown weathering siltstone, mudstone, and fine-grained quartz-rich sandstone, and is about 250 ft (76 m) thick. The upper unit is composed of yellow-brown to dark-gray siltstone and mudstone, quartz- and chert-rich sandstone, conglomeratic sandstone, and limestone, and is more than 2100 ft (640 m) thick in one measured section. The lower contact of the Frontier is placed at the top of a porcellanite bed that is associated with maroon mudstone and siltstone, limestone, and calcareous dark-gray shale in the underlying Vaughn Member of the Blackleaf Formation. The porcellanite bed directly overlies the highest maroon mudstone-siltstone bed of the upper Vaughn. The Frontier Formation in the eastern Pioneer Mountains was deposited on a broad delta plain dominated by fine-grained sediments. Sandstones exhibit characteristics of anastomosing fluvial channels, average 5% to 10% of the entire formation, and have width to depth ratios of less than 30. The Frontier in the eastern Pioneer Mountains is lithostratigraphically equivalent to the Frontier to the east in the Gravelly, Greenhorn, and Madison Ranges, but may include strata that are younger in age. Frontier strata to the south at Lima Peaks are the thickest in the region (up to 7000 ft; 2100 m) and include facies that are time-equivalent to the marine Frontier, the overlying Cody Shales, and the Telegraph Creek Formation of the Madison Range to the east. The Frontier in the eastern Pioneer Mountains is in part lithostratigraphically equivalent to the Coberly Formation in the Drummond, Montana area (50 mi [80 km] northwest of Butte, Montana) and the Marias River Shales near Great Falls (150 mi [240 km] northeast of Butte) in west-central Montana.

Mountain Geologist

Cretaceous rocks from southwestern Montana to southwestern Minnesota, northern Rocky Mountains, and Great Plains

In Montana, Wyoming, North and South Dakota, and Minnesota, Cretaceous strata are preserved in the asymmetric Western Interior foreland basin. More than 5,200 m (17,000 ft) of Cretaceous strata are present in southwestern Montana, less than 300 m (1,000 ft) in eastern South Dakota. The asymmetry resulted from varying rates of subsidence due to tectonic and sediment loading. The strata consist primarily of sandstone, siltstone, mudstone, and shale. Conglomerate is locally abundant along the western margin, whereas carbonate is present in most areas of the eastern shelf. Sediment was deposited in both marine and nonmarine environments as the shoreline fluctuated during major tectonic and eustatic cycles. A discussion of Cretaceous strata from southwestern to east-central Montana, the Black Hills, eastern South Dakota, and southwestern Minnesota shows regional stratigraphy and facies relations, sequence, boundaries, and biostratigraphic and radiometric correlations. The thick Cretaceous strata in southwestern Montana typify nonmarine facies of the rapidly subsiding westernmost part of the basin. These strata include more than 3,000 m (10,000 ft) of synorogenic conglomerate of the Upper Cretaceous part of the Beaverhead Group. West of the Madison Range, sequence boundaries bracket the Kootenai (Aptian and Albian), the Blackleaf (Albian and Cenomanian), and the Frontier Formations (Cenomanian and Turonian); sequence boundaries are difficult to recognize because the rocks are dominantly non-marine. Cretaceous strata in east-central Montana (about 1,371 m; 4,500 ft thick) lie at the approximate depositional axis of the basin and are mostly marine terrigenous rocks. Chert-pebble zones in these rocks reflect stratigraphic breaks that may correlate with sequence boundaries to the east and west. Cretaceous rocks of the Black Hills region consist of a predominantly marine clastic sequence averaging approximately 1,524 m (5,000 ft) thick. The Cretaceous System in eastern South Dakota (457 to 610 m; 1,500 to 2,000 ft thick) consists of a marine shelf sequence dominated by shale and limestone. Major sequence boundaries in South Dakota are at the base of the Lower Cretaceous Lakota Formation, Fall River Sandstone, and Muddy Sandstone, and bracket the Upper Cretaceous Niobrara Formation.

Book chapter