Geology topics

R. Finkelman

Publications and source records attributed to R. Finkelman.

4 recordsLinked to original sources

USGS2010

Depositional setting, petrology and chemistry of Permian coals from the Paraná Basin: 2. South Santa Catarina Coalfield, Brazil

In Brazil economically important coal deposits occur in the southern part of the Paraná Basin, where coal seams occur in the Permian Rio Bonito Formation, with major coal development in the states of Rio Grande de Sul and Santa Catarina. The current paper presents results on sequence stratigraphic interpretation of the coal-bearing strata , and petrological and geochemical coal seam characterization from the South Santa Catarina Coalfield, Paraná Basin. In terms of sequence stratigraphic interpretation the precursor mires of the Santa Catarina coal seams formed in an estuarine-barrier shoreface depositional environment , with major peat accumulation in a high stand systems tract (Pre-Bonito and Bonito seams), a lowstand systems tract (Ponta Alta seam, seam A, seam B) and a transgressive systems tract (Irapuá, Barro Branco and Treviso seams). Seam thicknesses range from 1.70 to 2.39 m, but high proportions of impure coal (coaly shale and shaley coal), carbonaceous shale and partings reduce the net coal thickness significantly. Coal lithoypes are variable, with banded coal predominant in the Barro Branco seam, and banded dull and dull coal predominantly in Bonito and Irapuá seams, respectively. Results from petrographic analyses indicate a vitrinite reflectance range from 0.76 to 1.63 %Rrandom (HVB A to LVB coal). Maceral group distribution varies significantly, with the Barro Branco seam having the highest vitrinite content (mean 67.5 vol%), whereas the Irapuá seam has the highest inertinite content (33.8 vol%). Liptinite mean values range from 7.8 vol% (Barro Branco seam) to 22.5 vol% (Irapuá seam). Results from proximate analyses indicate for the three seams high ash yields (50.2 – 64.2 wt.%). Considering the International Classification of in-Seam Coals, all samples are in fact classified as carbonaceous rocks (> 50 wt.% ash). Sulfur contents range from 3.4 to 7.7 wt.%, of which the major part occurs as pyritic sulfur. Results of X-ray diffraction indicate the predominance of quartz and kaolinite (also pyrite). Gypsum , gibbsite , jarosite and calcite were also identified in some samples. Feldspar was noted but is rare. The major element distribution in the three seams (coal basis) is dominated by SiO 2 (31.3 wt.%, mean value), Al 2 O 3 (14.5 wt.%, mean value) and Fe 2 O 3 (6.9 wt.%, mean value). Considering the concentrations of trace elements that are of potential environmental hazards the Barro Branco, Bonito and Irapuá seams (coal base) are significantly enriched in Co (15.7 ppm), Cr (54.5 ppm), Li (59.3 ppm), Mn (150.4 ppm), Pb (58.0 ppm) and V (99.6 ppm), when compared to average trace elements contents reported for U. S. coals. Hierarchical cluster analysis identified, based on similarity levels, three groups of major elements and seven groups of trace elements. Applying discriminant analyses using trace and major element distribution, it could be demonstrated that the three seams from Santa Catarina show distinct populations in the discriminant analyses plots, and also differ from the coals of Rio Grande do Sul analyzed in a previous study.

Santa Catarina↗

USGS2006

Petrology and chemistry of Permian coals from the Paraná Basin: 1. Santa Terezinha, Leão-Butiá and Candiota Coalfields, Rio Grande do Sul, Brazil

The current paper presents results on petrological and geochemical coal seam characterization in Permian coal-bearing strata from the Paraná Basin, southern Brazil. Sequence stratigraphic analysis shows that peat accumulation in Permian time was closely linked to transgressive/regressive cycles, with peat accumulation occurring in a predominantly back barrier/lagoonal setting. Coal petrographic analysis indicates subbituminous coals at Candiota and Leão-Butiá and high volatile bituminous coals at Santa Terezinha, where locally the coal seams are thermally altered by volcanic intrusions. Petrographic composition is highly variable, with seams at Candiota and Santa Terezinha frequently enriched in inertinite. Chemical analyses indicate that all coals are mineral matter-rich (mean 49.09 wt.%), with SiO 2 and Al 2 O 3 dominating as determined by ICP-AES. Quartz is also the predominant mineral detected by X-ray diffraction, where it is associated with feldspar, kaolinite and hematite and iron-rich carbonates. The results from Scanning Electron Microscopy are broadly consistent with the bulk chemical and mineralogical analysis. Quartz and clays are common in all samples analyzed. Other minerals observed were, amongst others, carbonates (calcite, siderite, ankerite), pyrite, monazite, kaolinite, barite, sphalerite, rutile and quartz of volcanic origin. The distribution of trace elements is well within the range typical for coal basins of other areas despite the fact that the Paraná Basin coals are very high in ash yields. The average concentrations for elements of environmental concern (As, B, Be, Cd, Co, Cr, Cu, Hg, Li, Mn, Mo, Ni, Pb, Sb, Se, Tl, U, V, Zn) are similar to or less than the mean values for U.S. coal. However, considered on an equal energy basis, Paraná Basin coals will produce in combustion 5 to 10 times the amount of most elements compared to an equal weight US coal. Concentrations of major and trace elements, such as Fe, B and S, appear to be controlled by depositional setting, with increasing values in coal seams overlain by brackish/marine strata. Hierarchical cluster analysis identified three groups of major minerals and seven groups of trace elements based on similarity levels. On a regional scale, the coalfields can be separated by the differences in rank (Candiota and Leão-Butiá versus Santa Terezinha) and by applying discriminant analysis based on 4 trace elements (Li, As, Sr, Sb). Highest Rb and Sr values occur at Candiota and are linked to syngenetic volcanism of the area, whereas high Y and Sr values at Santa Terezinha can be related to the frequent diabase intrusions in that area.

International Journal of Coal Geology↗

USGS2000

Distribution of trace elements in selected pulverized coals as a function of particle size and density

Trace elements in coal have diverse modes of occurrence that will greatly influence their behavior in many coal utilization processes. Mode of occurrence is important in determining the partitioning during coal cleaning by conventional processes, the susceptibility to oxidation upon exposure to air, as well as the changes in physical properties upon heating. In this study, three complementary methods were used to determine the concentrations and chemical states of trace elements in pulverized samples of four US coals: Pittsburgh, Illinois No. 6, Elkhorn and Hazard, and Wyodak coals. Neutron Activation Analysis (NAA) was used to measure the absolute concentration of elements in the parent coals and in the size- and density-fractionated samples. Chemical leaching and X-ray absorption fine structure (XAFS) spectroscopy were used to provide information on the form of occurrence of an element in the parent coals. The composition differences between size-segregated coal samples of different density mainly reflect the large density difference between minerals, especially pyrite, and the organic portion of the coal. The heavy density fractions are therefore enriched in pyrite and the elements associated with pyrite, as also shown by the leaching and XAFS methods. Nearly all the As is associated with pyrite in the three bituminous coals studied. The sub-bituminous coal has a very low content of pyrite and arsenic; in this coal arsenic appears to be primarily organically associated. Selenium is mainly associated with pyrite in the bituminous coal samples. In two bituminous coal samples, zinc is mostly in the form of ZnS or associated with pyrite, whereas it appears to be associated with other minerals in the other two coals. Zinc is also the only trace element studied that is significantly more concentrated in the smaller (45 to 63 ??m) coal particles.

Fuel Processing Technology↗

USGS1996

Origin and significance of high nickel and chromium concentrations in pliocene lignite of the Kosovo Basin, Serbia

Trace element data from 59 Pliocene lignite cores from the lignite field in the Kosovo Basin, southern Serbia, show localized enrichment of Ni and Cr (33-304 ppm and 8-176 ppm, respectively, whole-coal basis). Concentrations of both elements decrease from the western and southern boundaries of the lignite field. Low-temperature ash and polished coal pellets of selected bench and whole-coal samples were analyzed by X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray analyses. These analyses show that most of the Ni and Cr are incorporated in detrital and, to a lesser degree, in authigenic minerals. The Ni- and Cr-bearing detrital minerals include oxides, chromites, serpentine-group minerals and rare mixed-layer clays. Possible authigenic minerals include Ni-Fe sulfates and sulfides. Analyses of three lignite samples by a supercritical fluid extraction technique indicate that some (1-11%) of the Ni is organically bound. Ni- and Cr-bearing oxides, mixed-layer clays, chromites and serpentine-group minerals were also identified in weathered and fresh samples of laterite developed on serpentinized Paleozoic peridotite at the nearby Glavica and C??ikatovo Ni mines. These mines are located along the western and northwestern rim, respectively, of the Kosovo Basin, where Ni contents are highest. The detrital Ni- and Cr-bearing minerals identified in lignite samples from the western part of the Kosovo Basin may have been transported into the paleoswamp by rivers that drained the two Paleocene laterites. Some Ni may have been transported directly into the paleoswamp in solution or, alternatively, Ni may have been leached from detrital minerals by acidic peat water and adsorbed onto organic matter and included into authigenic mineral phases. No minable source of Ni and Cr is known in the southern part of the lignite field; however, the mineral and chemical data from the lignite and associated rocks suggest that such a source area may exist.

International Journal of Coal Geology↗