Geology topics

Phillip R. Moyle

Publications and source records attributed to Phillip R. Moyle.

9 recordsLinked to original sources

USGS2006

U.S. industrial garnet

The United States presently consumes about 16 percent of global production of industrial garnet for use in abrasive airblasting, abrasive coatings, filtration media, waterjet cutting, and grinding. As of 2005, domestic garnet production has decreased from a high of 74,000 t in 1998, and imports have increased to the extent that as much as 60 percent of the garnet used in the United States in 2003 was imported, mainly from India, China, and Australia; Canada joined the list of suppliers in 2005. The principal type of garnet used is almandite (almandine), because of its specific gravity and hardness; andradite is also extensively used, although it is not as hard or dense as almandite. Most industrial-grade garnet is obtained from gneiss, amphibolite, schist, skarn, and igneous rocks and from alluvium derived from weathering and erosion of these rocks. Garnet mines and occurrences are located in 21 States, but the only presently active (2006) mines are in northern Idaho (garnet placers; one mine), southeastern Montana (garnet placers; one mine), and eastern New York (unweathered bedrock; two mines). In Idaho, garnet is mined from Tertiary and (or) Quaternary sedimentary deposits adjacent to garnetiferous metapelites that are correlated with the Wallace Formation of the Proterozoic Belt Supergroup. In New York, garnet is mined from crystalline rocks of the Adirondack Mountains that are part of the Proterozoic Grenville province, and from the southern Taconic Range that is part of the northern Appalachian Mountains. In Montana, sources of garnet in placers include amphibolite, mica schist, and gneiss of Archean age and younger granite. Two mines that were active in the recent past in southwestern Montana produced garnet from gold dredge tailings and saprolite. In this report, we review the history of garnet mining and production and describe some garnet occurrences in most of the Eastern States along the Appalachian Mountains and in some of the Western States where industrial-grade garnet or its possible occurrence has been reported. Other natural and manmade materials compete with garnet in nearly all of the applications for which garnet can be used; garnet, however, has the advantages that it is reusable, nontoxic, and nonreactive. In addition, garnet produces much less dust than other abrasive materials, and spills are relatively benign and easy to clean up.

Bulletin↗

USGS2006

Spatial database of mining-related features in 2001 at selected phosphate mines, Bannock, Bear Lake, Bingham, and Caribou Counties, Idaho

This report describes the spatial database, PHOSMINE01, and the processes used to delineate mining-related features (active and inactive/historical) in the core of the southeastern Idaho phosphate resource area. The spatial data have varying degrees of accuracy and attribution detail. Classification of areas by type of mining-related activity at active mines is generally detailed; however, for many of the closed or inactive mines the spatial coverage does not differentiate mining-related surface disturbance features. Nineteen phosphate mine sites are included in the study, three active phosphate mines - Enoch Valley (nearing closure), Rasmussen Ridge, and Smoky Canyon - and 16 inactive (or historical) phosphate mines - Ballard, Champ, Conda, Diamond Gulch, Dry Valley, Gay, Georgetown Canyon, Henry, Home Canyon, Lanes Creek, Maybe Canyon, Mountain Fuel, Trail Canyon, Rattlesnake, Waterloo, and Wooley Valley. Approximately 6,000 hc (15,000 ac), or 60 km2 (23 mi2) of phosphate mining-related surface disturbance are documented in the spatial coverage. Spatial data for the inactive mines is current because no major changes have occurred; however, the spatial data for active mines were derived from digital maps prepared in early 2001 and therefore recent activity is not included. The inactive Gay Mine has the largest total area of disturbance, 1,900 hc (4,700 ac) or about 19 km2 (7.4 mi2). It encompasses over three times the disturbance area of the next largest mine, the Conda Mine with 610 hc (1,500 ac), and it is nearly four times the area of the Smoky Canyon Mine, the largest of the active mines with about 550 hc (1,400 ac). The wide range of phosphate mining-related surface disturbance features (141) from various industry maps were reduced to 15 types or features based on a generic classification system used for this study: mine pit; backfilled mine pit; waste rock dump; adit and waste rock dump; ore stockpile; topsoil stockpile; tailings or tailings pond; sediment catchment; facilities; road; railroad; water reservoir; disturbed land, undifferentiated; and undisturbed land. In summary, the spatial coverage includes polygons totaling about 1,100 hc (2,800 ac) of mine pits, 440 hc (1100 ac) of backfilled mine pits, 1,600 hc (3,800 ac) of waste rock dumps, 31 hc (75 ac) of ore stockpiles, and 44 hc (110 ac) of tailings or tailings ponds. Areas of undifferentiated phosphate mining-related land disturbances, called 'disturbed land, undifferentiated,' total about 2,200 hc (5,500 ac) or nearly 22 km2 (8.6 mi2). No determination has been made as to status of reclamation on any of the lands. Subsequent site-specific studies to delineate distinct mine features will allow additional revisions to this spatial database.

Data Series↗

USGS2006

Garnet--An Essential Industrial Mineral and January's Birthstone

Garnet is one of the most common minerals in the world. Occurring in almost any color, it is most widely known for its beauty as a gem stone. Because of its hardness and other properties, garnet is also an essential industrial mineral used in abrasive products, non-slip surfaces, and filtration. To help manage our Nation's resources of such essential minerals, the U.S. Geological Survey (USGS) provides crucial data and scientific information to industry, policymakers, and the public.

Fact Sheet↗

USGS2004

Chapter 21 Western phosphate field - Depositional and economic deposit models

The Western Phosphate Field (WPF), composed of Permian marine sedimentary strata that cover over 300,000 km 2 in the middle Rocky Mountains of Idaho, Montana, Utah, and Wyoming in the United States, contains vast resources of phosphate mined for fertilizer and a range of other industrial applications. The richest deposits of phosphate in the WPF occur in the Meade Peak Phosphatic Shale Member of the Phosphoria Formation in southeast Idaho. Phosphate is an essential and even limiting nutrient of algal production, which occurs at the bottom of the marine food web in the oceanic photic zone. The high concentrations of phosphate and trace elements in the Phosphoria Formation reflect a low accumulation rate of diluting phases, such as terrigenous siliciclastic debris and carbonate, rather than an unusually high level of primary productivity at the time of deposition. Indeed, the mean rate of accumulation of PO 4 3 required a continuous flux of PO 4 3 into the basin and the photic zone of the water column, but only at a moderate level. This flux was maintained by upwelling of nutrient-rich seawater, imported at depth from the open ocean. Although only a fraction of the organic matter that hosted the PO 4 3 and other nutrients (NO 3 , Cd, Cu, Mo, Ni, and Zn) actually escaped oxidation in the water column, their rate of accu- mulation on the sea floor defined the basin hydrography. Rates of accumulation of Cr, U, V, and rare-earth elements by precipitation and adsorp- tion reactions identify redox conditions in the bottom water as having been denitrifying, maintained by a balance between the rate of oxidation of organic matter settling through the water column and the flux of open-ocean seawater at depth. Atmospheric mixing maintained oxygen respiration in the uppermost several tens of meters of the water column. This hydrography and seawater chemistry are present in several sedimentary envi- ronments in the ocean today. In the WPF, there is an estimated surface mineable reserve base and subeconomic resource of 7.6 billion mt, at an average grade of 24% P 2 O 5 ; a subeconomic underground- mineable resource of 17 billion mt, at a grade of 28%; and 507 billion mt of subresource- grade phosphatic material that underlie the WPF at a depth greater than 305 m. The relationship between phosphate-ore specifications and weathering suggests that significant changes in processing, with associated cost increases, will be required to extend recovery of ore below the relatively strongly weathered zone near the surface. Four open pit mines currently extract phosphate from two moderately to steeply dipping ore zones that typically contain between 20% and 35% P 2 O 5 . Although the shales are enriched in trace elements, especially As, Cd, Cr, Cu, Mo, Se, U, V, Zn, and rare-earth elements, the relative concentration of organic carbon and selected major element oxides determines the suitability of phosphate-rich rock for feed to processing plants and its other applications. Selected specifications from the four operating mines include the following: minimum P 2 O 5 of 18-20% and average of 26-27%; maximum A1 2 O 3 of 1.6-5.0%; maximum MgO of 0.3-0.6%; a CaO/P 2 O 5 ratio of 1.5-1.6; and total carbon content of 4%-5%. Weathering to a depth of as much as 100 m significantly enhances ore quality by decreasing the proportions of calcite, dolomite, and organic matter relative to carbonate fluorapatite, the primary ore mineral

Colorado, Idaho, Montana, Nebraska, North Dakota, ↗

USGS2004

Digital Database of Selected Aggregate and Related Resources in Ada, Boise, Canyon, Elmore, Gem, and Owyhee Counties, Southwestern Idaho

The U.S. Geological Survey (USGS) compiled a database of aggregate sites and geotechnical sample data for six counties - Ada, Boise, Canyon, Elmore, Gem, and Owyhee - in southwest Idaho as part of a series of studies in support of the Bureau of Land Management (BLM) planning process. Emphasis is placed on sand and gravel sites in deposits of the Boise River, Snake River, and other fluvial systems and in Neogene lacustrine deposits. Data were collected primarily from unpublished Idaho Transportation Department (ITD) records and BLM site descriptions, published Army Corps of Engineers (ACE) records, and USGS sampling data. The results of this study provides important information needed by land-use planners and resource managers, particularly in the BLM, to anticipate and plan for demand and development of sand and gravel and other mineral material resources on public lands in response to the urban growth in southwestern Idaho.

Open-File Report↗

USGS2003

Contributions to Industrial-Minerals Research

Contributions to Industrial-Minerals Research, an ongoing series of U.S. Geological Survey (USGS) Bulletin chapters, presents research strategies, results, and updates of investigations of industrial minerals by USGS scientists and cooperators. Industrial minerals are defined as valuable nonmetallic, nonfuel geologic materials, generally rocks or minerals, used in a wide range of construction and industrial applications-for example, sand, gravel, and crushed rock used as aggregate for construction; limestone used for cement; phosphate for fertilizers and insecticides; and diatomite used for filtration, fillers, and abrasives. The term also comprises some processed materials, such as cement and metallic compounds with major utilization in nonmetallic forms. For example, titanium is commonly grouped with industrial minerals because more than 90 percent of it is sold and utilized in the form of the oxide (TiO2) rather than as Ti metal. Other metals and metallic compounds commonly grouped with industrial minerals include Mn, Cr, Fe oxides, and rare-earth elements (REEs).

Bulletin↗

USGS2001

Assessment of the sand and gravel resources of the Lower Boise River Valley area, Idaho: Part one: Geological framework of the sand and gravel deposits

The USGS has undertaken a first order evaluation of sand & gravel resources in the Lower Boise River Valley in response to rapid urban expansion in the Boise-Nampa-Caldwell corridor in southwest Idaho. The study is intended to provide land-use planners and managers, particularly in the Bureau of Land Management, with a foundation of knowledge that will allow them to anticipate and plan for demand for and development of sand and gravel resources on public lands in response to the urban growth. Attributes under study include: regional geology of both alluvial source areas as well as deposits; fluvial processes that led to deposition of the sand and gravel deposits; spatial distribution of the deposits; quantity and quality of materials in the deposits; and the suitability of the deposits for a range of applications. The study will also examine and attempt to model the association between fluvial processes, deposit characteristics, and physical specifications for various applications of sand and gravel. The results will be presented in a series of sand and gravel assessment reports of which this is the first.

Idaho↗

USGS2001

Digital database of mining-related features at selected historic and active phosphate mines, Bannock, Bear Lake, Bingham, and Caribou counties, Idaho

This report provides a description of data and processes used to produce a spatial database that delineates mining-related features in areas of historic and active phosphate mining in the core of the southeastern Idaho phosphate resource area. The data have varying degrees of accuracy and attribution detail. Classification of areas by type of mining-related activity at active mines is generally detailed; however, the spatial coverage does not differentiate mining-related surface disturbance features at many of the closed or inactive mines. Nineteen phosphate mine sites are included in the study. A total of 5,728 hc (14,154 ac), or more than 57 km 2 (22 mi 2 ), of phosphate mining-related surface disturbance are documented in the spatial coverage of the core of the southeast Idaho phosphate resource area. The study includes 4 active phosphate mines—Dry Valley, Enoch Valley, Rasmussen Ridge, and Smoky Canyon—and 15 historic phosphate mines—Ballard, Champ, Conda, Diamond Gulch, Gay, Georgetown Canyon, Henry, Home Canyon, Lanes Creek, Maybe Canyon, Mountain Fuel, Trail Canyon, Rattlesnake Canyon, Waterloo, and Wooley Valley. Spatial data on the inactive historic mines is relatively up-to-date; however, spatially described areas for active mines are based on digital maps prepared in early 1999. The inactive Gay mine has the largest total area of disturbance: 1,917 hc (4,736 ac) or about 19 km 2 (7.4 mi 2 ). It encompasses over three times the disturbance area of the next largest mine, the Conda mine with 607 hc (1,504 ac), and it is nearly four times the area of the Smoky Canyon mine, the largest of the active mines with 497 hc (1,228 ac). The wide range of phosphate mining-related surface disturbance features (approximately 80) were reduced to 13 types or features used in this study—adit and pit, backfilled mine pit, facilities, mine pit, ore stockpile, railroad, road, sediment catchment, tailings or tailings pond, topsoil stockpile, water reservoir, and disturbed land (undifferentiated). In summary, the spatial coverage includes polygons totaling 1,114 hc (2,753 ac) of mine pits, 272 hc (671 ac) of backfilled mine pits, 1,570 hc (3,880 ac) of waste dumps, 26 hc (64 ac) of ore stockpiles, and 44 hc (110 ac) of tailings or tailings ponds. Areas of undifferentiated phosphate mining-related land disturbances, called “disturbed land,” total 2,176 (5,377 ac) or nearly 21.8 km 2 (8.4 mi 2 ). No determination has been made as to status of reclamation on these lands. Subsequent site-specific studies to delineate distinct mine features will allow modification of this preliminary spatial database.

Idaho↗

USGS1988

Mineral resources of the Whipple Mountains and Whipple Mountains Addition Wilderness Study Areas, San Bernardino County, California

At the request of the U.S. Bureau of Land Management, approximately 85,100 acres of the Whipple Mountains Wilderness Study Area (CDCA-312) and 1,380 acres of the Whipple Mountains Addition Wilderness Study Area (AZ-050-010) were evaluated for identified mineral resources (known) and mineral resource potential (undiscovered). In this report, the Whipple Mountains and Whipple Mountains Addition Wilderness Study Areas are referred to as simply "the study area." Most of the mines and prospects with identified resources in the Whipple Mountains Wilderness Study Area are within areas designated as having mineral resource potential. The area in and around the Turk Silver mine and the Lucky Green group and the area near the northwest boundary of the study area have high mineral resource potential for copper, lead, zinc, gold, and silver. An area along the west boundary of the study area has moderate resource potential for copper lead, zinc, gold, and silver. An area in the east adjacent to the Whipple Mountains Addition Wilderness Study Area has moderate resource potential for copper, gold, and silver resources. One area on the north boundary and one on the southeast boundary of the study area have low mineral resource potential for copper, lead, zinc, gold, and silver. Two areas, one on the north boundary and one inside the east boundary of the study area, have moderate resource potential for manganese. A small area inside the south boundary of the study area has high resource potential for decorative building stone, and the entire study area has low resource potential for sand and gravel and other rock products suitable for construction. Two areas in the eastern part of the study area have low resource potential for uranium. There is no resource potential for oil and gas or geothermal resources in the Whipple Mountains Wilderness Study Area. Sites within the Whipple Mountains Wilderness Study Area with identified resources of copper, gold, silver, manganese and (or) decorative building stone are located at the Stewart mine, New American Eagle mine, Turk Silver mine, Twin Lode mine, decorative stone property, Lucky Green group, Blue Cloud mine, Nickel Plate mine, Crescent mine, Quadrangle Copper group, and the Copper Basin mine. The Whipple Mountains Addition Wilderness Study Area has moderate resource potential for copper, gold, and silver resources and low resource potential for sand and gravel and other rock products. There is no resource potential for oil and gas or for geothermal energy in the Whipple Mountains Addition Wilderness Study Area. Although there are no identified resources in the Whipple Mountains Addition Wilderness Study Area, sites within and immediately adjacent warrant further study because of gold assays from widespread, numerous samples.

California↗