Geology topics

Peter J. Mouginis-Mark

Publications and source records attributed to Peter J. Mouginis-Mark.

8 recordsLinked to original sources

USGS2025

Complex staged emplacement of a basaltic lava: The example of the July 1974 flow of Kīlauea

Basaltic lava flows can be highly destructive. Forecasting the future path and/or behavior of an active lava flow is challenging because topography is often poorly constrained and lava has a complex rheology and emplacement history. Preserved lavas are an important source of information which, combined with observations of active flows, underpins conceptual models of lava flow emplacement. However, the value of preserved lavas is limited because pre-eruptive topography and, thus, syn-eruptive lava flow geometry are usually not known. Here, we use tree-mold data to constrain pre-eruptive topography and syn-eruptive lava flow geometry of the July 1974 flow of Kīlauea (USA). Tree molds, which are formed after advancing lava encloses standing trees, preserve the lava inundation height and the final preserved thickness of lava. We used data from 282 tree molds to reconstruct the temporal and spatial evolution of the ~ 2.1 km-long July 1974 flow. The tree mold dataset yields a detailed dynamic picture of staged emplacement, separated by intervals of ponding. In some ponded areas, flow depth during emplacement (~ 5 m) was twice the preserved thickness of the final lava (2–3 m). Drainage of the ponds led to episodic surges in flow advancement, decoupled from fluctuations in vent discharge rate. We infer that the final breakout occurred after the cessation of fountaining. Such complex emplacement histories may be common for pāhoehoe lavas at Kīlauea and elsewhere in situations where the terrain is of variable slope, and/or where lava is temporarily perched and stored.

Hawaii↗

USGS2021

Geologic map of Olympus Mons caldera, Mars

The Mars volcano, Olympus Mons, is probably the best known extraterrestrial volcano. The summit forms a nested caldera with six overlapping collapse pits that collectively measure ~65 x ~80 kilometers (km). Numerous wrinkle ridges and graben occur on the caldera floor, and topographic data indicate >1.2 km of elevation change since the formation of the floor as a series of lava lakes. The paths of lava flows on the south and southeast flanks do not conform to present-day topography. Mapping at a scale of 1:200,000 shows that the summit area displays a complex volcanic history that has numerous similarities to terrestrial shield volcanoes. Pangboche crater is a large (~10-km-diameter) crater of impact origin that lies on the south flank of the caldera and, because of the elevation and lack of volatiles, it displays numerous features more similar to fresh lunar craters than to impact craters on Mars.

Scientific Investigations Map↗

USGS2021

Exposure of an early to middle Noachian valley network in three dimensions on Mars

We document a set of channels in a section of the Martian cratered highlands located between crustal massifs northeast of Hellas Planitia that are visible in cross section and planview >200 m below the surface. The morphometry and spatial distribution of the outcrops provide concrete geological evidence of a dynamic aqueous system in a structural sub-basin during the Early to Middle Noachian, bolstering evidence of conditions compatible with sustained liquid water on the surface very early in Mars' history.

Icarus↗

USGS2015

Geologic map of Tooting crater, Amazonis Planitia region of Mars

Tooting crater has a diameter of 27.2 km, and formed on virtually flat lava flows within Amazonis Planitia ~1,300 km west of the summit of Olympus Mons volcano, where there appear to have been no other major topographic features prior to the impact. The crater formed in an area ~185 x 135 km that is at an elevation between −3,870 m and −3,874 m relative to the Mars Orbiter Laser Altimeter (MOLA) Mars datum. This fortuitous situation (for example, a bland, horizontal target) allows the geometry of the crater and the thickness of the ejecta blanket to be accurately determined by subtracting the appropriate elevation of the surrounding landscape (−3,872 m) from the individual MOLA measurements across the crater. Thus, for the first time, it is possible to determine the radial decrease of ejecta thickness as a function of distance away from the rim crest. On the basis of the four discrete ejecta layers surrounding the crater cavity, Tooting crater is classified as a Multiple-Layered Ejecta (MLE) crater. By virtue of the asymmetric distribution of secondary craters and the greater thickness of ejecta to the northeast, Morris and others (2010) proposed that Tooting crater formed by an oblique impact from the southwest. The maximum range of blocks that produced identifiable secondary craters is ~500 km (~36.0 crater radii) from the northeast rim crest. In contrast, secondary craters are only identifiable ~215 km (15.8 radii) to the southeast and 225 km (16.5 radii) to the west.

Scientific Investigations Map↗

USGS2005

Real-time measurement of volcanic SO 2 emissions: Validation of a new UV correlation spectrometer (FLYSPEC)

A miniaturized, lightweight and low-cost UV correlation spectrometer, the FLYSPEC, has been developed as an alternative for the COSPEC, which has long been the mainstay for monitoring volcanic sulfur dioxide fluxes. Field experiments have been conducted with the FLYSPEC at diverse volcanic systems, including Masaya (Nicaragua), Poás (Costa Rica), Stromboli, Etna and Vulcano (Italy), Villarica (Chile) and Kilauea (USA). We present here those validation measurements that were made simultaneously with COSPEC at Kilauea between March 2002 and February 2003. These experiments, with source emission rates that ranged from 95 to 1,560 t d −1 , showed statistically identical results from both instruments. SO 2 path-concentrations ranged from 0 to >1,000 ppm-m with average correlation coefficients greater than r 2 =0.946. The small size and low cost create the opportunity for FLYSPEC to be used in novel deployment modes that have the potential to revolutionize the manner in which volcanic and industrial monitoring is performed.

Bulletin of Volcanology↗

USGS1999

Geologic map of the Galaxias quadrangle (MTM 35217) of Mars

The Galaxias region (MTM 35217) is one of a series of 1:500,000-scale science study areas on Mars sponsored by NASA's Planetary Geology and Geophysics Program. Situated near the northern limit of lava flows associated with Elysium Mons, this region includes a mixture of volcanic and nonvolcanic terrains. The region is also of interest for the fluvial systems that originate along the distal margins of the Elysium lava flows. Resolution of Viking Orbiter images used to prepare the base map ranges from 40 to 160 m/pixel. High-resolution frames (40 to 80 m/pixel) are found in the southeastern part of the map area and along the north edge of the quadrangle, but over half the quadrangle is included in medium-resolution frames (150 m/pixel). Two 8 m/pixel, very high resolution scenes are available (see fig. 1). Interpretation is complicated by variable resolution and sun angles that vary from east to west illumination on different images. Mapping methods and principles are adapted from those developed for lunar photogeologic mapping by Shoemaker and Hackman (1962), refined by Wilhelms (1972), and successfully applied by many workers to a variety of planetary surfaces. Mapping units are distinguished by topography and texture and are ranked by relative age on the basis of superposition and transection relations. Material units are assigned to time-stratigraphic systems defined by Scott and Carr (1978) and Tanaka (1986). This area is included within earlier maps that used Mariner 9 images at 1:5,000,000 scale (Elston, 1979) and globally at 1:25,000,000 scale (Scott and Carr, 1978). Regional maps based on the much higher resolutions of Viking Orbiter allowed more detailed discrimination of materials by Greeley and Guest (1987) at 1:15,000,000 scale and Tanaka and others (1992) at 1:5,000,000 scale. Some map units on this 1:500,000-scale map correspond to, or are partially equivalent to, units on the larger scale maps of Greeley and Guest (1987) and Tanaka and others (1992). Established terminology is used where feasible, but the scale of this map requires that some new units be introduced and that some previous terminology be redefined. Photogeologic methods are limited; therefore, more than one geologic explanation is given for some material units that do not readily lend themselves to an unequivocal interpretation.

IMAP↗

USGS1990

Lava flow surface textures: SIR-B radar image texture, field observations, and terrain measurements

Space Shuttle Imaging Radar (SIR-8) images, field observations, and small-scale (cm) terrain measurements are used to study lava flow surface textures related to emplacement processes of a single hawaiian lava flow. Although smooth pahoehoe textures are poorly characterized on the SIR-B data, rougher pahoehoe types and the a'a flow portion show image textures attributed to spatial variations in surface roughness. Field observations of six distinct lava flow textural units are described and used to interpret modes of emplacement. Terrain measurements of these units show that surface roughness differs across and along the flow, apparently due to shear during flow emplacement. The radar smooth/rough boundary between pahoehoe and a'a occurs at a vertical relief of -10 cm on this lava flow. While direct observation and measurement most readily yield information related to lava eruption and emplacement processes, analyses of remote sensing data such as those acquired by imaging radars and altimeters can provide a means of quantifying surface texture, identifying the size and distribution of flow components, and delineating textural unit boundaries.

Hawaii↗

USGS1989

Geologic analyses of Shuttle Imaging Radar (SIR-B) data of Kilauea Volcano, Hawaii

Analyses of imaging radar data of volcanic terranes on Earth and Venus have emphasized the need for a clearer understanding of how these data can be most effectively used to accomplish important volcanological goals, including the interpretation of eruptive styles and the characterization of the geologic history of volcanic centers. The second Shuttle Imaging Radar experiment (SIR-B) obtained two digital images over the summit caldera and the Southwest Rift Zone of Kilauea Volcano in 1984. Our geologic analyses of these images indicate that SIR-B data are particularly useful for delineating the distribution and surface textural variations of a'a lava flows, for mapping large-scale topographic features with radar-facing slopes, and for identifying an areally extensive pyroclastic deposit. Analyses of the SIR-B data of Kilauea, however, do not permit unambiguous identification of landforms such as pahoehoe lava flows, cinder cones, and fissures. Although separation of low-return units such as pahoehoe lava flows and adjacent pyroclastic ash is not greatly improved using standard image-enhancement techniques, the texture-analysis technique applied here did facilitate discrimination of such smooth-surfaced volcanic deposits. Although analyses of the SIR-B data permit a generally accurate interpretation of the eruptive history of Kilauea, the inability to distinguish low-return pahoehoe flows results in misinterpretation of several aspects of Kilauea volcanism, suggesting that caution should be exercised in the interpretation of SAR data of volcanic terranes.

Hawaii↗