Geology Reports⌕ Search

Geology topics

P. Segall

Publications and source records attributed to P. Segall.

At least 19 recordsLinked to original sources

Nucleation and growth of strike slip faults in granite

Fractures within granodiorite of the central Sierra Nevada, California, were studied to elucidate the mechanics of faulting in crystalline rocks, with emphasis on the nucleation of new fault surfaces and their subsequent propagation and growth. Within the study area the fractures form a single, subparallel array which strikes N50°–70°E and dips steeply to the south. Some of these fractures are identified as joints because displacements across the fracture surfaces exhibit dilation but no slip. The joints are filled with undeformed minerals, including epidote and chlorite. Other fractures are identified as small faults because they display left-lateral strike slip separations of up to 2 m. Slickensides, developed on fault surfaces, plunge 0°–20° to the east. The faults occur parallel to, and in the same outcrop with, the joints. The faults are filled with epidote, chlorite, and quartz, which exhibit textural evidence of shear deformation. These observations indicate that the strike slip faults nucleated on earlier formed, mineral-filled joints. Secondary, dilational fractures propagated from near the ends of some small faults contemporaneously with the left-lateral slip on the faults. These fractures trend 25°±10° from the fault planes, parallel to the direction of inferred local maximum compressive stress. The faults did not propagate into intact rock in their own planes as shear fractures. Rather, adjacent faults were linked together by secondary, dilational fractures. Extensive secondary fracturing between faults produced larger fault zones that accommodate 10–100 m of left-lateral slip. As deformation progressed, faulting evolved from relatively short, closely spaced faults to longer, more widely spaced fault zones.

Journal of Geophysical Research Solid Earth↗

Detection of a locked zone at depth on the Parkfield, California, segment of the San Andreas fault

The Parkfield, California, segment of the San Andreas fault is transitional in character between the creeping segment of the fault to the northwest and the locked Carrizo Plain segment to the southeast. The rate of shallow fault slip decreases from 25–30 mm/yr northwest of the epicenter of the 1966 Parkfield earthquake to zero at the southeastern end of the 1966 rupture zone. Data from a network of trilateration lines spanning the San Andreas fault near Parkfield and extending to the Pacific coast near San Luis Obispo shed light on the rate of fault slip at depth since the 1966 earthquake. In this study, average rates of line length change and shallow fault slip were inverted to determine the slip rate at depth on the Parkfield fault segment. The fault is taken to be a vertical surface with unknown distribution of strike-slip displacement in an elastic half-space. A striking result of the inversions is that all solutions providing acceptable fits to the data exhibit a locked zone essentially coincident with the rupture surface of the 1966 Parkfield earthquake. The data require that the locked zone extend nearly as far north as the 1966 epicenter; however, the vertical extent of the locked zone is not well resolved. Over much of the Parkfield segment the fault is slipping faster at the earth's surface than it is at seismogenic depths. In order to fit the trilateration measurements it is necessary to include a component of contraction normal to the trend of the San Andreas. The inversion results suggest a spatially uniform normal strain of −0.06 μstrain/yr. The orientation of the contraction is compatible with geologic and seismic evidence of active folding and reverse faulting in the region. The magnitude of the contraction is consistent with convergence rates inferred from global plate motion models.

Journal of Geophysical Research Solid Earth↗

Spatiotemporal evolution of dike opening and décollement slip at Kīlauea Volcano, Hawai'i

Rapid changes in ground tilt and GPS positions on Kīlauea Volcano, Hawai'i, are interpreted as resulting from a shallow, two‐segment dike intrusion into the east rift zone that began at 1217 UTC (0217 HST) on 17 June 2007 and lasted almost 3 days. As a result of the intrusion, a very small volume of basalt (about 1500 m 3 ) erupted on 19 June. Northward tilt at a coastal tiltmeter, subsidence of south flank GPS sites, southeastward displacements at southwestern flank GPS sites, and a swarm of flank earthquakes suggest that a slow slip event occurred on the décollement beneath Kīlauea's south flank concurrent with the rift intrusion. We use 4 min GPS positions that include estimates of time‐dependent tropospheric gradients and ground tilt data to study the spatial and temporal relationships between the two inferred shallow, steeply dipping dike segments extending from the surface to about 2 km depth and décollement slip at 8 km depth. We invert for the temporal evolution of distributed dike opening and décollement slip in independent inversions at each time step using a nonnegative least squares algorithm. On the basis of these inversions, the intrusion occurred in two stages that correspond spatially and temporally with concentrated rift zone seismicity. The dike opening began on the western of the two segments before jumping to the eastern segment, where the majority of opening accumulated. Dike opening preceded the start of décollement slip at an 84% confidence level; the latter is indicated by the onset of northward tilt of a coastal tiltmeter. Displacements at southwest flank GPS sites began about 18 h later and are interpreted as resulting from slow slip on the southwestern flank. Additional constraints on the evolution of the intrusion and décollement slip come from inversion of an Envisat interferogram that spans the intrusion until 0822 UTC on 18 June 2007, combined with GPS and tilt data. This inversion shows that up to 0822 UTC on 18 June, décollement slip is only required in a limited region offshore of Ka'ena Point. A similar inversion of the complete event, which includes GPS and tilt data up to 21 June and a second Envisat interferogram spanning the complete intrusion until 21 June, shows décollement slip spread westward across the south flank. This may suggest westward migration of the décollement slip as the event progressed.

Hawaii↗

Cyclic ground tilt associated with the 2004–2008 eruption of Mount St. Helens

The long‐term behavior of the 2004–2008 effusive eruption of Mount St. Helens was characterized by a gradual decline in the rates of seismicity, dome growth, and broad‐scale ground deformation, but shallow near‐periodic “drumbeat” earthquakes over timescales of minutes indicated episodic short‐term behavior. In part to better characterize this behavior and any associated ground deformation, a network of tiltmeters was installed and recorded thousands of cyclic tilt events within the crater. The duration of these events, from minutes to hours, was too long for them to be directly caused by the drumbeat seismicity. Tilt events were characterized by a recoverable, asymmetric pattern of rapid tilt away from the vent followed by a more gradual reversal, were highly correlated between different tiltmeters in the crater, sometimes occurred in association with volcanic seismicity, and ceased at the end of the eruption. Tilt vectors converged on a point just south of the center of the preexisting 1980s lava dome, and the absence of detectable tilt outside the crater suggests a shallow source (<1 km). We examine several models, including cycles of conduit pressurization and plug slip or gas loss and stick‐slip behavior on the interface between the ascending plug and the 1980s lava dome. The small number of stations within the crater prevents a unique determination of source type or geometry, but results are consistent with a mechanism involving extrusion of the semisolid dacite plug and/or cycles of conduit pressurization.

Washington↗

Geodetic evidence for en echelon dike emplacement and concurrent slow slip during the June 2007 intrusion and eruption at Kilauea volcano, Hawaii

A series of complex events at Kīlauea Volcano, Hawaii, 17 June to 19 June 2007, began with an intrusion in the upper east rift zone (ERZ) and culminated with a small eruption (1500 m 3 ). Surface deformation due to the intrusion was recorded in unprecedented detail by Global Positioning System (GPS) and tilt networks as well as interferometric synthetic aperture radar (InSAR) data acquired by the ENVISAT and ALOS satellites. A joint nonlinear inversion of GPS, tilt, and InSAR data yields a deflationary source beneath the summit caldera and an ENE-striking uniform-opening dislocation with ~2 m opening, a dip of ∼80° to the south, and extending from the surface to ~2 km depth. This simple model reasonably fits the overall pattern of deformation but significantly misfits data near the western end of an inferred dike-like source. Three more complex dike models are tested that allow for distributed opening including (1) a dike that follows the surface trace of the active rift zone, (2) a dike that follows the symmetry axis of InSAR deformation, and (3) two en echelon dike segments beneath mapped surface cracks and newly formed steaming areas. The en echelon dike model best fits near-field GPS and tilt data. Maximum opening of 2.4 m occurred on the eastern segment beneath the eruptive vent. Although this model represents the best fit to the ERZ data, it still fails to explain data from a coastal tiltmeter and GPS sites on Kīlauea's southwestern flank. The southwest flank GPS sites and the coastal tiltmeter exhibit deformation consistent with observations of previous slow slip events beneath Kīlauea's south flank, but inconsistent with observations of previous intrusions. Slow slip events at Kīlauea and elsewhere are thought to occur in a transition zone between locked and stably sliding zones of a fault. An inversion including slip on a basal decollement improves fit to these data and suggests a maximum of ~15 cm of seaward fault motion, comparable to previous slow-slip events.

Hawai'i↗

Kilauea slow slip events: Identification, source inversions, and relation to seismicity

Several slow slip events beneath the south flank of Kilauea Volcano, Hawaii, have been inferred from transient displacements in daily GPS positions. To search for smaller events that may be close to the noise level in the GPS time series, we compare displacement fields on Kilauea's south flank with displacement patterns in previously identified slow slip events. Matching displacement patterns are found for several new candidate events, although displacements are much smaller than previously identified events. One of the candidates, 29 May 2000, is coincident with a microearthquake swarm, as are all of the previously identified slow slip events. The microearthquakes follow the onset of slow slip, implying that they are triggered by stress changes during slip. The new slow slip event brings the total number of events on Kilauea, between 1997 and 2007, to eight, the smallest having M W = 5.3, and the largest having M W = 6.0. While the recurrence time between the four largest events is 2.11 ± 0.01 years, the repeat time for all eight events is 0.9 ± 0.6 years. We invert for the fault geometry and distribution of slip during the slow slip events. The optimal source depths of 5 km, assuming uniform slip dislocations in an elastic half‐space, are considerably shallower than the accompanying swarm earthquakes (6.5–8.5 km), which would place the earthquakes in a zone of decreased Coulomb stress. Inversions including the effects of topography and layered elastic structure in the forward models favor depths comparable to microearthquake depths, such that the earthquakes are located in a region of increased Coulomb stress. We also invert for time‐dependent fault slip directly from the 30 s GPS phase observations, constraining the source to the optimal uniform slip geometry. On the basis of these inversions, the larger events last between 1.5–2.2 days. The data are unable to resolve migration of slip along the fault. The temporal pattern of accompanying microearthquakes is consistent with the fault slip history assuming a seismicity rate theory based on rate and state‐friction, making the swarm earthquakes coshocks and aftershocks of the slow slip events.

Hawaii↗

Interferogram formation in the presence of complex and large deformation

Sierra Negra volcano in Isabela island, Galápagos, erupted from October 22 to October 30 in 2005. During the 8 days of eruption, the center of Sierra Negra's caldera subsided about 5.4 meters. Three hours prior to the onset of the eruption, an earthquake (Mw 5.4) occurred, near the caldera. Because of the large and complex phase gradient due to the huge subsidence and the earthquake, it is difficult to form an interferogram inside the caldera that spans the eruption. The deformation is so large and spatially variable that the approximations used in existing InSAR software (ROI, ROI_PAC, DORIS, GAMMA) cannot properly coregister SAR image pairs spanning the eruption. We have developed here a two-step algorithm that can form intra-caldera interferograms from these data. The first step involves a "rubber-sheeting" SAR image coregistration. In the second step we use range offset estimates to mitigate the steep phase gradient. Using this new algorithm, we retrieve an interferogram with the best coverage to date inside the caldera of Sierra Negra.

Isabela island, Sierra Negra volcano↗

Spatiotemporal evolution of a transient slip event on the San Andreas fault near Parkfield, California

In 1993 several baselines of the two-color electronic distance meter (EDM) network at Parkfield, California, deviated from their long-term rates, coincident with anomalous observations from nearby strain meters and a creep meter, as well as an increase in microseismicity. Between October 1992 and December 1994, three M ??? 4.5 earthquakes occurred beneath Middle Mountain, near the hypocenter of the 1934 and 1966 Parkfield M6 events. We analyzed the two-color EDM data using a Kalman-filtering based technique to image the spatiotemporal evolution of slip on the fault at Parkfield between the mid-1980s and 2003. This method accounts for localized random walk motion of the geodetic monuments and a prominent seasonal signal that affects many baselines. We find that a slip rate increase occurred between January 1993 and July 1996 on the upper 8 km of the fault near Middle Mountain. The peak estimated slip rate during this time was 49 mm/yr, which exceeds the long-term geologic rate of ???35 mm/yr. The slip rate evolution appears episodic, with an initial modest increase after the M4.3 earthquake and a much larger jump following the shallower M4.7 event in December 1994. This temporal correlation between inferred slip and seismicity suggests that the moderate earthquakes triggered the aseismic fault slip. The EDM data cannot resolve whether transient slip propagated across the nucleation zone of the 1934 and 1966 M6 Parkfield earthquakes. However, transient slip and its associated stress release in the hypocentral area of previous Parkfield events is consistent with the nucleation of the 2004 M6 Parkfield earthquake elsewhere on the fault. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

The mechanics of unrest at Long Valley caldera, California: 1. Modeling the geometry of the source using GPS, leveling and two-color EDM data

We surveyed 44 existing leveling monuments in Long Valley caldera in July 1999, using dual frequency global positioning system (GPS) receivers. We have been able to tie GPS and leveling to a common reference frame in the Long Valley area and computed the vertical deformation by differencing GPS-based and leveled orthometric heights. The resurgent dome uplifted 74??7 cm from 1975 to 1999. To define the inflation source, we invert two-color EDM and uplift data from the 1985-1999 unrest period using spherical or ellipsoidal sources. We find that the ellipsoidal source satisfies both the vertical and horizontal deformation data, whereas the spherical point source cannot. According to our analysis of the 1985-1999 data, the main source of deformation is a prolate ellipsoid located beneath the resurgent dome at a depth of 5.9 km (95% bounds of 4.9-7.5 km). This body is vertically elongated, has an aspect ratio of 0.475 (95% bounds are 0.25-0.65) and a volume change of 0.086 km3 (95% bounds are 0.06-0.13 km3). Failure to account for the ellipsoidal nature of the source biases the estimated source depth by 2.1 km (35%), and the source volume by 0.038 km3 (44%). ?? 2003 Elsevier B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗

The mechanics of unrest at Long Valley caldera, California. 2. Constraining the nature of the source using geodetic and micro-gravity data

We model the source of inflation of Long Valley caldera by combining geodetic and micro-gravity data. Uplift from GPS and leveling, two-color EDM measurements, and residual gravity change determinations are used to estimate the intrusion geometry, assuming a vertical prolate ellipsoidal source. The U.S. Geological Survey occupied the Long Valley gravity network six times from 1980 to 1985. We reoccupied this network twice, in the summer of 1998 (33 stations), and the summer of 1999 (37 stations). Before gravity data can be used to estimate the density of the intrusion, they must be corrected for the effect of vertical deformation (the free-air effect) and changes in the water table. We use geostatistical techniques to interpolate uplift and water table changes at the gravity stations. The inflation source (a vertical prolate ellipsoid) is located 5.9 km beneath the resurgent dome with an aspect ratio equal to 0.475, a volume change from 1982 to 1999 of 0.136 km3 and a density of around 1700 kg/m3. A bootstrap method was employed to estimate 95% confidence bounds for the parameters of the inflation model. We obtained a range of 0.105-0.187 km3 for the volume change, and 1180-2330 kg/m3 for the density. Our results do not support hydrothermal fluid intrusion as the primary cause of unrest, and confirm the intrusion of silicic magma beneath Long Valley caldera. Failure to account for the ellipsoidal nature of the source biases the estimated source depth by 2.9 km (a 33% increase), the volume change by 0.019 km3 (a 14% increase) and the density by about 1200 kg/m3 (a 40% increase). ?? 2003 Elsevier B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗

The Long Valley Caldera GIS database

This database provides an overview of the studies being conducted by the Long Valley Observatory in eastern California from 1975 to 2001. The database includes geologic, monitoring, and topographic datasets related to Long Valley caldera. The CD-ROM contains a scan of the original geologic map of the Long Valley region by R. Bailey. Real-time data of the current activity of the caldera (including earthquakes, ground deformation and the release of volcanic gas), information about volcanic hazards and the USGS response plan are available online at the Long Valley observatory web page (http://lvo.wr.usgs.gov). If you have any comments or questions about this database, please contact the Scientist in Charge of the Long Valley observatory.

Data Series↗

The 12 September 1999 Upper East Rift Zone dike intrusion at Kilauea Volcano, Hawaii

Deformation associated with an earthquake swarm on 12 September 1999 in the Upper East Rift Zone of Kilauea Volcano was recorded by continuous GPS receivers and by borehole tiltmeters. Analyses of campaign GPS, leveling data, and interferometric synthetic aperture radar (InSAR) data from the ERS-2 satellite also reveal significant deformation from the swarm. We interpret the swarm as resulting from a dike intrusion and model the deformation field using a constant pressure dike source. Nonlinear inversion was used to find the model that best fits the data. The optimal dike is located beneath and slightly to the west of Mauna Ulu, dips steeply toward the south, and strikes nearly east-west. It is approximately 3 by 2 km across and was driven by a pressure of ∼15 MPa. The total volume of the dike was 3.3 × 10 6 m 3 . Tilt data indicate a west to east propagation direction. Lack of premonitory inflation of Kilauea's summit suggests a passive intrusion; that is, the immediate cause of the intrusion was probably tensile failure in the shallow crust of the Upper East Rift Zone brought about by persistent deep rifting and by continued seaward sliding of Kilauea's south flank.

Hawaii↗

Constraints on dike propagation from continuous GPS measurements

The January 1997 East Rift Zone eruption on Kilauea volcano, Hawaii, occurred within a network of continuous Global Positioning System (GPS) receivers. The GPS measurements reveal the temporal history of deformation during dike intrusion, beginning ∼8 hours prior to the onset of the eruption. The dike volume as a function of time, estimated from the GPS data using elastic Green's functions for a homogeneous half-space, shows that only two thirds of the final dike volume accumulated prior to the eruption and the rate of volume change decreased with time. These observations are inconsistent with simple models of dike propagation, which predict accelerating dike volume up to the time of the eruption and little or no change thereafter. Deflationary tilt changes at Kilauea summit mirror the inferred dike volume history, suggesting that the rate of dike propagation is limited by flow of magma into the dike. A simple, lumped parameter model of a coupled dike magma chamber system shows that the tendency for a dike to end in an eruption (rather than intrusion) is favored by high initial dike pressures, compressional stress states, large, compressible magma reservoirs, and highly conductive conduits linking the dike and source reservoirs. Comparison of model predictions to the observed dike volume history, the ratio of erupted to intruded magma, and the deflationary history of the summit magma chamber suggest that most of the magma supplied to the growing dike came from sources near to the eruption through highly conductive conduits. Interpretation is complicated by the presence of multiple source reservoirs, magma vesiculation and cooling, as well as spatial variations in dike-normal stress. Reinflation of the summit magma chamber following the eruption was measured by GPS and accompanied a rise in the level of the Pu'u O'o lava lake. For a spheroidal chamber these data imply a summit magma chamber volume of ∼20 km 3 , consistent with recent estimates from seismic tomography. Continuous deformation measurements can be used to image the spatiotemporal evolution of propagating dikes and to reveal quantitative information about the volcanic plumbing systems.

Hawai'i↗

Volcano monitoring using the Global Positioning System: Filtering strategies

Permanent Global Positioning System (GPS) networks are routinely used for producing improved orbits and monitoring secular tectonic deformation. For these applications, data are transferred to an analysis center each day and routinely processed in 24-hour segments. To use GPS for monitoring volcanic events, which may last only a few hours, real-time or near real-time data processing and subdaily position estimates are valuable. Strategies have been researched for obtaining station coordinates every 15 min using a Kalman filter; these strategies have been tested on data collected by a GPS network on Kilauea Volcano. Data from this network are tracked continuously, recorded every 30 s, and telemetered hourly to the Hawaiian Volcano Observatory. A white noise model is heavily impacted by data outages and poor satellite geometry, but a properly constrained random walk model fits the data well. Using a borehole tiltmeter at Kilauea's summit as ground-truth, solutions using different random walk constraints were compared. This study indicates that signals on the order of 5 mm/h are resolvable using a random walk standard deviation of 0.45 cm/√h. Values lower than this suppress small signals, and values greater than this have significantly higher noise at periods of 1–6 hours.

Hawai'i↗

January 30, 1997 eruptive event on Kilauea Volcano, Hawaii, as monitored by continuous GPS

A continuous Global Positioning System (GPS) network on Kilauea Volcano captured the most recent fissure eruption in Kilauea's East Rift Zone (ERZ) in unprecedented spatial and temporal detail. The short eruption drained the lava pond at Pu'u O' o, leading to a two month long pause in its on-going eruption. Models of the GPS data indicate that the intrusion's bottom edge extended to only 2.4 km. Continuous GPS data reveal rift opening 8 hours prior to the eruption. Absence of precursory summit inflation rules out magma storage overpressurization as the eruption's cause. We infer that stresses in the shallow rift created by the continued deep rift dilation and slip on the south flank decollement caused the rift intrusion.

Geophysical Research Letters↗

Magma intrusion beneath Long Valley caldera confirmed by temporal changes in gravity

Precise relative gravity measurements conducted in Long Valley (California) in 1982 and 1998 reveal a decrease in gravity of as much as -107 ?? 6 microgals (1 microgal = 10-8 meters per square second) centered on the uplifting resurgent dome. A positive residual gravity change of up to 64 ?? 15 microgals was found after correcting for the effects of uplift and water table fluctuations. Assuming a point source of intrusion, the density of the intruding material is 2.7 x 103 to 4.1 x 103 kilograms per cubic meter at 95 percent confidence. The gravity results require intrusion of silicate magma and exclude in situ thermal expansion or pressurization of the hydrothermal system as the cause of uplift and seismicity.

Science↗

Postseismic strain following the 1989 Loma Prieta earthquake from GPS and leveling measurements

Postseismic deformation in the 5 years following the 1989 Loma Prieta earthquake has been measured with the Global Positioning System and precise leveling. Postearthquake velocities at distances greater than ∼20 km from the coseismic rupture are not significantly different from those observed in the 20 years prior to the earthquake. However, velocities at stations within ∼20 km of the rupture exceed preearthquake rates and exhibit unanticipated contraction normal to the strike of the San Andreas fault system. A combination of forward modeling and nonlinear optimization suggests that the observed postseismic deformations were caused by aseismic oblique reverse slip averaging 2.9 cm/yr on the San Andreas fault and/or the Loma Prieta rupture zone and 2.4 cm/yr reverse slip along a buried fault within the Foothills thrust belt. The best fitting sources of postseismic deformation are all located at depths of less than 15 km. We find no evidence for accelerated flow or shear below the Loma Prieta rupture in the first 5 years following the earthquake. The inferred postseismic slip is likely to have been caused by the coseismic stress change updip of the 1989 rupture.

Journal of Geophysical Research B: Solid Earth↗

Rapid deformation of the south flank of Kilauea volcano, Hawaii

The south flank of Kilauea volcano has experienced two large [magnitude ( M ) 7.2 and M 6.1] earthquakes in the past two decades. Global Positioning System measurements conducted between 1990 and 1993 reveal seaward displacements of Kilauea's central south flank at rates of up to about 10 centimeters per year. In contrast, the northern side of the volcano and the distal ends of the south flank did not displace significantly. The observations can be explained by slip on a low-angle fault beneath the south flank combined with dilation deep within Kilauea's rift system, both at rates of at least 15 centimeters per year.

Hawaii↗